For the more experienced: MX440 MSI8891

Question
is there a way to O/C the video card clock speeds at the power up level(like editing the video bios file)? I would like to have the clock speed set when the pc powers up and not through windows nVidia drivers and registrey values.
Anyone have any ideas?

Thanks Somebody but Im looking to set the vid card like you use to set the CPU when there were jumpers. When you booted your system the CPU was running at what ever MGHZ you set. Or for that fact like you set the multiplyer and voltage now in the bios.
I am pretty finiky about Windows XP boot time and the monitor refreshing after the nVidia driver sets the clock speed if you adjust them through the drivers. I would rather have them set when the bios powers up. Hmmm I think I will have to look at the bios(a copy of course) and see what I can figure out.

Similar Messages

  • Hi, here's something for the more experienced to ponder.

    Hi, here's something for the more experienced to ponder.
    As of the past week or two my service has been taking nose dives periodically.
    The telephone service has also been affected. (noise and static like squeals)
    This is not a new problem, it has been ongoing for three years.
    I have repeatedly asked for a new pair (copper) to no avail.
    We went the route of replacement modems, data rate changes, Verizon presidential appeals and the problem "seems" to correct itself with cooler weather in the fall.
    I called repair service for the telephone just Friday and met with an understanding person on Verizon's end. She heard the noise on the line and listened patiently to my internet troubles. She assured me that she could schedule someone to fix the problem on Saturday, 6/16/2012 I thanked her and let it go for Friday.
    This morning at about 9:00 AM I got a call from a Verizon representative, not about the  problem, but rather about how the representative at repair service handled the call. I said the call handling was a ten on their scale. But when the question was asked about if I would recommend Verizon to someone, I had to ask that it could be repeated because of the noise on the line.
    It's pretty obvious that I didn't give a good mark as the answer to that question.
    But to the technical side of this to get people to ponder on this, here's my PRESENT Transceiver Statistics, copy and pasted for you to ponder....
    Transceiver Statistics
    Transceiver Revision     A2pB020b3.d20h
    Vendor ID Code               4D54
    Line Mode                        ADSL_2plus
    Data Path                         FAST
    Transceiver Information    Down Stream Path    Up Stream Path
    DSL Speed (Kbits/Sec)                    358                         747
    Margin (dB)                                     16.0                         9.9
    Line Attenuation (dB)                      62.5                        38.3
    Transmit Power (dBm)                    15.5                         12.4
    ( NO EDITING WAS DONE TO THE NUMBERS ABOVE, Formatting was done, adding spaces, to attempt to make it clearer to read. )
    I did not make any rude or crude remarks, because I think I may be on a watch list as my last two messages were edited and then deleted. But the bottom line is that I am not a "happy camper".
    Further food for thought; my filter is located in the demarcation box, from there to the modem is a home run with approved wire. An additional filter is installed after the "voice line" comes into the house from the demarcation box for the whole house.
    Line to the pole is new, maybe three pair, I don't remember. Distance to the central office is about two miles, BUT there is some sort of device installed in the lines between here and there, according to what was said by previous repair personnel.
    This is the third year with these problems.
    Any thoughts?, anyone?
    Solved!
    Go to Solution.

    Thanks Mr. Smith,
    I'll try and get back in after the dust settles and let you know how it goes.
    If I can't, thanks again!
    Gerry

  • How do you sign up for the MORE program and get the 50MG for free?

    I was told that if you signed up for the MORE - Cloud program you will get 50mg for Free?  I didn't receive that.  Anyone know how that works?

        Hello skyles!
    I have great news! If you have the More Everything plan, you get 25GBs of cloud storage. That's a bunch more room than 50MBs! Here's a link to check it out: http://vz.to/1eTSQHd
    Thanks,
    ChristinaB_VZW
    Follow us on Twitter @VZWSupport

  • To The More Experienced People

    Hi,
    I know Java and I've worked on J2EE projects (I only worked on the EJB layer, not the Web layer). But despite this, I feel that I should know much more than I currently do in order to compete in the job market.
    I want to learn:
    1) Struts
    2) Spring
    3) SOAP
    4) Web Services
    and probably much more that don't come to the top of my head at the moment.
    I can Google these things and learn on my own, I'm sure. But to be honest, all of the things I think I need to learn is so much - it's overwhelming. I don't know where to start or how to prioritize these things. I spoke to a headhunter the other day who told me he thinks Struts (or was it Swing, I don't remember) is becoming obsolete and will be replaced with some other technology (JSF?). This was news to me and made me even more confused on where to concentrate my efforts.
    These things are probably not all that difficult to learn for someone at my level (an experienced developer and knowledgeable in Java/J2EE), but I really can't focus. Any of you go through that? Any insight on how to tackle things?
    Edited by: JavaIsMyThing on Aug 29, 2008 9:35 AM

    The off topic banter is harmless and has some positive aspects (it helps build a community). Please ignore it if you don't like it. On to your question(s).
    I don't know where to start or how to prioritize these thingsWell, there is no rule about how to do this. Pick the ones that you think sound most interesting or that you think will be most applicable to the projects you're currently working in.
    I spoke to a headhunter the other day who told me he thinks Struts (or was it Swing, I don't remember) is becoming obsolete and will be replaced with some other technology (JSF?)."Old" Struts is somewhat obsolete. There's a "new" Struts 2 that's less so. Spring is fairly hot. JSF is a plausible contender too. In my opinion none of them will win out - you'll find it useful to get some familiarity with all of them. If I had to recommend just one, I'd say give Spring a whirl (but I have a vested interest in that).
    This was news to me and made me even more confused on where to concentrate my efforts.Headhunters will say anything. I wouldn't take any advice - technical or otherwise - from them. Worry about fellow technologists, not people who're paid commission on filling open roles. They'd tell you COBOL was the next big thing if they had a position to fill.
    Any insight on how to tackle things?Follow a few Java-oriented websites (TheServerSide is pretty good). Learn something that you personally think is interesting as often as you can stand it. When a colleague mentions that another team are using JSpong, go and find out about it and try it out.
    Maybe build a few side projects in your copious free time using one of them?

  • MRP RUN for the more than one line item in sales order.

    Hi ,
    In the sales order nuber of line item are , i will have to take MRP RUN for selected line item .
    So plz suggest what development will require?
    Abhay
    Edited by: abhay patil on May 30, 2008 8:52 AM

    HI,
    U can write separate prog. Which will ask sales order no. and from to line item or multiple line item of sale order. Then in loop internally pass the each line item no to MD50 prog. Which will run in background.
    I will give u sample prog. Which I had created for running MRP for all the lines items of given sales order in one go.
    *& Report  ZPRG_PP_001
    REPORT  ZPRG_PP_001.
    tables vbak.
    data: begin of it_vbap occurs 1,
            vbeln  type    vbap-vbeln,
            posnr  type    vbap-posnr,
          end   of it_vbap.
    DATA: P_MODE   TYPE    C.
          Batchinputdata of single transaction
    DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
    selection-screen begin of block b1 with frame title text-001.
      parameters :   p_vbeln  like  vbak-vbeln obligatory.
      selection-screen skip.
      parameters :   p_fore   radiobutton group mode,
                     p_back   radiobutton group mode default 'X'.
    selection-screen end   of block b1.
    at selection-screen.
    Check Sales Order
      if not p_vbeln is initial.
        select single * from vbak
          where vbeln eq p_vbeln.
        if sy-subrc <> 0.
          message e499(sy) with 'Invalid Sales Order no.' p_vbeln.
        endif.
      endif.
    start-of-selecTION.
    Get Sales order items
      select vbeln posnr from vbap
        into table it_vbap
        where vbeln eq p_vbeln.
    Set BDC mode
      if p_back eq 'X'.
        p_mode = 'E'.
      else.
        p_mode = 'A'.
      endif.
    Process MD50 BDC
      LOOP AT IT_VBAP.
        perform bdc_dynpro      using 'SAPMM61X' '0160'.
        perform bdc_field       using 'BDC_CURSOR'  'RM61X-TRMPL'.
        perform bdc_field       using 'BDC_OKCODE'  '/00'.
        perform bdc_field       using 'RM61X-KDAUF'  IT_VBAP-VBELN.
        perform bdc_field       using 'RM61X-KDPOS'  IT_VBAP-POSNR.
        perform bdc_field       using 'RM61X-BANER'  '1'.
        perform bdc_field       using 'RM61X-LIFKZ'  '3'.
        perform bdc_field       using 'RM61X-PLMOD'  '3'.
        perform bdc_field       using 'RM61X-TRMPL'  '1'.
        perform bdc_dynpro      using 'SAPMSSY0' '0120'.
        perform bdc_field       using 'BDC_OKCODE'   '=XBAC'.
        CALL TRANSACTION 'MD50' USING BDCDATA MODE P_MODE.
        CLEAR BDCDATA.
        REFRESH BDCDATA.
      ENDLOOP.
    end-of-selection.
           Start new screen                                              *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR BDCDATA.
      BDCDATA-PROGRAM  = PROGRAM.
      BDCDATA-DYNPRO   = DYNPRO.
      BDCDATA-DYNBEGIN = 'X'.
      APPEND BDCDATA.
    ENDFORM.
           Insert field                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
      CLEAR BDCDATA.
      BDCDATA-FNAM = FNAM.
      BDCDATA-FVAL = FVAL.
      APPEND BDCDATA.
    ENDFORM.
    Ajay P. Nikte

  • What Illy CS4 book would you recommend for the beginner to grow with?

    Hello All,
                 I am looking for a good illustrator cs4 book for the beginner to grow with.
    I have read reviews on amazon but thought I might ask the pros.
    Any advice would be greatly appreciated.

    The instructions that ship with the program: The Help menu.
    I know it's boring, but if you want to learn a new program, the most expedient way is to work through the provided manual, cover to cover. Don't just read it, actually perform the operations it describes.
    Third-party books almost universally involve these downsides:
    They are expensive.
    They are incomplete. They try to walk a fence-edge between rank beginner and intermediate user; between being merely a too-wordy reiteration of the Help files and next-level techniques for the more experienced user. The reason is obvious: the goal is to sell to as wide a range of users as possible. The result is often unsatisfying: They can't possibly include everything in the Help files, so they leave gaps for the beginner. But they feel compelled to appeal to beginners, so the experienced user has to weed through a bunch of entry-level bulk, just to get to the "juicy stuff" he's interested in. He pay's 100% price for about 15% of the content.
    The are inefficient. They are full of unnecssary verbiage attempting to be clever, cute, hip, friendly, and thereby supposedly more "approachable." Most fail miserably at this, and the result is you have to read through endless passages of such original content as "this will knock your socks off" and "this is awesome" when what you really need is "just the facts, ma'am." The Help files fall under the stylistic guidelines of technical documentation: They adhere to "just-the-facts, ma'am."
    They are short-lived. They go quickly out-of-date, which is one of the reasons why they are too expensive: They have to make their money quickly after release.
    I'm not saying don't buy any. I have a small fortune's-worth myself, all but a dozen or so of which I wish I had never bought. With the money I wasted on them (plus interest), I could buy a new Honda Fury. I'm just saying do the included documentation--however painful--first. And keep doing it for new features when new versions are released. That will get you there the quickest, because it will lay the necessary foundations of overall interface scheme and basic object principles. Then, when you have that understanding, look only for books that are targeted toward an at-least intermediate level user. That way, your money will be spent, but it will be better-invested.
    JET

  • If I wanted to upgrade my iPod touch to the more expensive version, how long would I have to do so? (UK)

    If I went to an Apple store in the UK with my 16GB iPod touch 5th gen and the receipt (do I 100% need a receipt?), how long after the purchase date am I allowed to get it replaced for the more expensive 32GB version? Is it the same as getting a refund (Jan 7th)?
    Not having a camera on the back side of the iPod is just ridiculous, I don't honestly believe the majority of people would prefer to have a camera on the front rather than the back. I'd rather just get it upgraded.
    Thanks for any help.

    cheddarman1 wrote:
    ..Is there any way I can trade it in for the 32GB iPod touch at the Apple store for it's RRP .
    Sorry... Apple does not do Trade-Ins.
    You would need to sell it privately and put whatever you get for it towards what you want to buy.

  • Protection for the touchscreen

    Hi everybody,
    With almost 2 weeks having a 5530XM I'm beginning to worry about its health and long life.
    What do you suggest for the protection of the touchscreen? Is it advisable to use the screen protectors that can be found here and there?
    So far, I've not detached the protective sheet that comes with the device. Is that a good idea?
    And finally, is it hard or easy to scratch the screen with regular use? (I'm concerned specially about the stylus) Perhaps, there is no need for protection!
    Best Regards

    I can't comment directly on the 5530XM but as a N97 owner I would recommend getting a screen protector. If you don't have one you will definitely get scratches from general use and the odd time when you accidentally put the phone in your pocket with keys/coins or something similar.
    Screen protectors are definitely cheaper to replace than the screen and there are two general choices in screen protectors: the first is the cheaper kind that you get in a pack of 2 or 3 and replace on a regular basis; the second is the more expensive kind that last along time (like Invisible Skinz). Both have pros and cons, maybe try the cheaper kind first and if they don't suit your need you can always go for the more expensive kind. I would also recommend leaving the original one on until you have your new screen protector ready to install.
    Hope this helps! 
    Nokia N97 (RM-507) v 22
    iPhone 4 (Coming Soon) - Lemon N97 - SE - Nokia 8210 - Nokia 7710 - Nokia 5100

  • CRS Install hostname being used by more than once for the same node.

    Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
    "You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
    Has anyone experienced this error message before and know what the cause is?
    Could it be a problem with the /etc/hosts file?
    Thanks in advance,
    M

    Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
    Also, the installer may complain if your private and public IPs are configured under the same subnet.
    Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
    - public name and IP addresses of ALL nodes
    - private name and IP addresses of ALL nodes
    - VIP name and IP addresses of ALL nodes
    Hope that helps
    B.

  • For the first time, I downloaded a podcast in the podcast app by clicking on the cloud icon. Now, every single play button for all of my podcast episodes is grayed out. Why can't I play any of my podcasts any more?

    For the first time, I downloaded a podcast in the podcast app by clicking on the cloud icon. Now, every single play button for all of my podcast episodes is grayed out. Why can't I play any of my podcasts any more?

    Greetings Heather,
    After reading your post, it sounds like you are experiencing an error with the Podcasts app. You may want to consider restarting the device first, and then resetting if that does not work. This article provides detailed instructions for Restarting, and Reseting:
    Turn your iOS device off and on (restart) and reset
    How to restart
    Press and hold the Sleep/Wake button on the top of your device until the red slider appears. Then drag the slider to turn your device completely off.
    After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
    How to reset
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Thank you for contributing to Apple Support Communities,
    BobbyD

  • Hi, i have 2 i phones,recently one stolen from overseas when i check through Find my iphone its showing only 1 which in my hand. I can't remember which apple Id was for the stolen one? could please someone have more idea?

    hi, i have 2 i phones,recently one stolen from overseas when i check through Find my iphone its showing only 1 which in my hand. I can't remember which apple Id was for the stolen one? could please someone have more idea?

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • I ordered a battery for my laptop because it said to replace battery soon.  How long can I let the new battery sit around as I wait for the old one to run out of more charge?

    I ordered a battery for my laptop because it said to replace battery soon.  How long can I let the new battery sit around as I wait for the old one to run out of more charge?  Will the new one become less effective if it sits around too long?

    How much capacity is remaining on your current battery?
    Check your power status
    From the  menu: Hold OPTION and click System Information... èHardware è Power
    Copy and Paste in your reply.
    The new battery will become less effective if you store it in a hot or humid environment. It should be stored at room temperature (22 C).
    Long term storage (6 months):
    Apple recommends that you store the battery with a 50% charge. If you store a battery when it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge. Conversely, if you store it fully charged for an extended period of time, the battery may experience some loss of battery capacity, meaning it will have a shorter life.
    http://www.apple.com/batteries/

  • Issue in FF v 3.6.10: I have a page which have more than 20 link, clicking on these link opens up a popup using window.showModalDialog, for the first 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open.

    Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

Maybe you are looking for