For the past few days my iphone has not been able to get a proper 3g signal. I use vodafone and every 10 or so seconds my iPhone says no service and then searches again to find the 3 g signal. If I disable mobile data and 3g it works fine! what is wrong?
I have even reinstalled ios twice and still it does not change the situation. What could have happened. My sim works fine in any other 3g device.
@Dakotaep
I am so sorry to hear of your experience with purchasing your new Samsung Galaxy Note 3! This definitely should have been resolved in your first call to us. I would be glad to review your account and ensure the Edge Agreement is corrected. Please accept my "Follow" request and send me a direct message so I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter VZWSupport on Twitter.
Similar Messages
-
After the lastest update on iTunes I have not been able to get into the program. I have uninstalled all components and reinstalled and now it is telling me I am missing .dll files. I am so frustrated. I probably lost my entire library except what I purchased
Your library should be safe.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
To follow up on my question. Only because this is the first time I am using this forum.
I have owned the iPad for approximately six months.
I have been using the iPad at home thru my wireless network, no problems.
In addition to my IPad I connect to the intent with my laptop, and my cell phone. No problem.
Suddenly approximately five days ago I have not been able to connect my IPad to the Internet. Laptop and cell phone still connect.
However when I leave my home I am able to connect my IPad from the Public Library and from Starbucks.
Can anyone give me some advice on how to get connected from my home.
Not sure how or when I can expect a response to this problem.
Thanks
Bill
<Email Edited by Host>Thanks, however I am not familiar with the Sleep and Homekey buttons on my IPad.
What I plan to do when I get home from Starbucks is, Settings/general/Reset/reset network
I have rebooted my router no luck.
Am I missing something on not knowing about the Sleep and Homekey?
Thanks,
Bill -
Please help! After I click ok on the error message above I get another message box that says "ITunes not installed Error 7 (Windows error 193)
I have uninstalled it and re-installed it, I have rsn the repair ITunes, I have re doqnloaded Quicktime- nothing will work
ThanksI also had this issue when one day itunes stopped working for me on windows 8...
the error message I received first was: C:Programme files\common files\Apple\Apple Push service.dll is either not designed to run on windows or contains an error.
followed by: ITunes not installed Error 7 (Windows error 193)
Your response addressed how to fix this issue with earlier windows operating systems, but not for windows 8, so what ended up working for me was your advice applied a little differently. For anyone running windows 8 needing to know how to resolve this issue by repairing the Apple Application Support program, try following these simple steps - what a relief it was to have itunes working again after applying b noir's answer to the windows 8 operating system!
1. Swipe in from the right edge of the screen, tap Settings, and then tap Control Panel.
(If you're using a mouse, point to the lower-right corner of the screen, move the mouse pointer up, click Settings, and then click Control Panel.)
2. Click the Programs and Features icon.
3. In the list of programs and features, find the Apple Application Support feature and click to select it.
4. In the gray title bar above it, click Repair.
5. Approve the window prompts that follow until the repair has been completed.
6. Relaunch iTunes.
Hope this helps & good luck! -
Has anyone been able to get a repair/proper fix from Apple for their LCD?
The more I use my Macbook Pro while traveling the more i notice the 'sparkly/grainy' display. Compared to the White/Black Macbook it is obviously noticable what i'm talking about - especially on white backgrounds. My question is - has anyone been able to get a proper repair/fix for this common problem for the Core 2 Duo 15" Macbook Pro's?
I normally have my Macbook Pro connected to an external display but when i do take it along when I travel it stands out more and more every time.
Is Apple going to issue a 'recall/repair' for their customers who bought their Macbook Pro's? What am I to do here, When i need to use my laptop when I travel I can't take the annoyance of using this LCD screen.
C2D 2.16 2GB Mac OS X (10.4.8)Yes, I can CLEARLY see it, it's like wearing glasses that are filthy. The laptop is one week old and I could see it from after the 802.11n upgrade. This is not all that zoomed, really. To me it looks like a video memory problem, not a LCD problem. The problem is the same if I connect an external DELL monitor. Also very visible there. Also very visible if I change resolutions or number of colours. The main reason I believe it's a video memory thing is that when I move a window, it changes from white to, well... yellow and red. Check out: http://niklas.saers.com/MBP/MG8665.jpg That is why I am unsure if this is the kind of grain you are talking about. Can you confirm that this is the kind of problem you guys are seeing?
PS, I use a Canon 20D with a 100mm f/2.8 macro lens. -
The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.
The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.
-
During CS5 master collection update on Windows 7, 64-bit laptop, I get the error "There was an error downloading this update. Please quit and try again later." This has been happening for the past few days. Can someone help me getting my updates?
Since CS5 is from 4+ years before the Cloud, this is not the right forum... but I don't really know a correct forum for that very old product
Have you tried to manually update the individual programs?
All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/ -
opps. Long title there... The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers. This is only happening on my Macbook not other macs. Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted those. Checked for software update and installed suggested downloads. Problem still contintues. Any suggestions?
Folks,
even after having repaired the inbox folder under "properties" a few times, I still had some e-mails where the contents are different from the subject line.
In other words in the inbox there are two e-mails: one with subject line "abc", and another one with subject line "def".
When I display the e-mail with the subject line "abc", the contents are from the e-mail with the subject line "def" in the in-basket.
What else can be done to correct this problem?
Thanks and best regards.
Fred Kunz-Shirzad
Chemin Ronzeures 6A
1297 Founex VD
Switzerland
[email protected] -
I cannot log on to my Comcast e-mail from my IMac anymore. This is a new issue, recently I had to delete cookies from my system in order so my email wasn’t frozen, but over the past few days it has went from bad to worse. I am able to enter my login information, but it just goes right back to the home page. Any suggestions…maybe I deleted something else in the process.
OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount..... -
For the past few days, I have not been able to read my incoming hotmail nor any of the emails in all my folders on my iMac. However, I can do so using other computers on Windows. Please advise what can be done.
For the past few days, I have not been able to read my incoming hotmail nor any of the emails in all my folders on my iMac. However, I can do so using other computers on Windows. Please advise what can be done.
-
I have not been able to get the built-in iPhone 4S keyboard dictation to work. I talk into it, then tap "Done", then the phone "thinks" for a few seconds (the purple dots pulse and I see the network icon on the top bar spinning) and then nothing happens.
Siri is wroking fineI am experiencing exactly the same problem, today, and a reset, of all settings, did nothing to correct it. Any suggestions would be welcome. While dictation in all apps is out, Siri is working fine also.
-
FCP X is loading and loading with the colour wheel revolving for ever for the past few days.
FCP X is loading and loading with the colour wheel revolving for ever, for the past few days.
FCP X was working fine in my new 15" Mac book pro (Retina display with Mountain Lion 10.8.2) for the past one month. Now a days, each time I try to open the FCP X, the same non-stop colour wheel is rotating, trying to restore one of my project. It continues even for hours together. Finally I am force quiting the application.
How do I come out of it ? Will I be able to recover my project. I didn't do any backup in particular.
Is backing up on the regular basis is required?
I tried the following guidance by Apple,
In the Finder, hold down the Option key and choose Library from the Go menu.
In the Library folder that opens, go to Application Support/Final Cut Pro.
Drag the Layouts folder from the Final Cut Pro folder to the Trash.
Still my problem is continued
Help meThis is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
Make sure you're using the latest version of the application - FCP X 10.0.5 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.5.
First, check that you have at least 20% free space on your system drive.
For smooth playback without dropping frames, make sure 'Better Performance' is selected in the FCP X Preferences - Playback Tab.
If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
Check the spec of your Mac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Check the spec of your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install of the OS would be recommended.
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
If your playback in FCP X is not good, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
The downside of 'Proxy' is that it looks awful. DON'T use Proxy when you're assessing things like video quality - especially focus.
If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Personally, I work with XDCAM EX and h.264 from a Canon DSLR. Both of these run fine with my system, but I do transcode multicam clips.
Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
http://assistedediting.intelligentassistance.com/EventManagerX/
Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
If none of this helps, you might have incompatible or corrupt media or project files. Move ALL your Events and Projects to temporary folders so that FCP X doesn't find them on launch. If it launches OK, re-introduce the Events and Projects one at a time, re-launching each time, so that you can track down the corrupt or incompatible files.
Andy -
I am on Adobe Cloud but over the past few days every time I try to open indesign I get the message that there is a missing plug-in Actions. RPLN, and the app will not open. Any ideas?
Hi, when I try to open indesign itself this message comes up:
Adobe Indesign cannot load the ACTIONS.RPLN plug-in. The plug-in requires
the 10.1 version of indesign.. Please contact the vendor to get a
compatible version of ACTIONS.RPLN.
I am not able to click off the message to make the box disappear, so have
to crash out.
Paul -
? I can't open iTunes at all. When I hit the icon, it lights up but doesn't engage to open the program. The past few days I'd been experiencing frequent freezes when using the iTunes Store. Any ideas for how to open iTunes?
I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...
-
Slow broadband over the past few days.
My broadband speed has gone slow pver the past few days, from a guaranteed 2mbps to 0.92kbps
http://www.speedtest.net/my-result/3615801582
I'm a BT Vision customer, so if I don't have the 2mbps guaranteed, my Bt Vision is pointless.
Any help would be greatly appreciated.in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
there is no speed guaranteed - all packages are sold as up to speeds. no ISP guarantees any speed
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Maybe you are looking for
-
Multi Thread Server over TCP/IP
Multi Thread Server over TCP/IP. Does it work? In my box it works only over IPC protocol. null
-
Windows 7 will not recognize ipod touch, but itunes does.
i've removed iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour, and Apple Application Support. then reinstalled itunes 11.0.2.26; restarted computer. tried diff usb ports, cables. same issue -- the ipod is NOT recogni
-
I am having a problem with the desktop app. It tells me I have 4 updates to install, when I click on update all it installs them and confirms that all 4 applications are up to date, however on my mac going to sleep and awaking the desktop app again r
-
Routing non-contiguous WAN with RV042?
Environment: RV042 V03 (firmware v4.0.0.07-tm) currently routing a /29 to an internal network. We used up our /29 and now have a 2nd non-contiguous /29. Both of these come over the same wire. Is there any way to configure the RV042 to route both blo
-
I've had my computer for a little over a month, and the other day it stopped running off the battery. Everything is fine when I have the AC adapter plugged in, but the computer won't start up if it is disconnected. I ran the computer off the battery