For the second time my itunes libary has gone!
this is the second time this has happened, i open itunes and low and behold absoultly nothing and to say the least i wasnt happy about it. does anyone know why this keeps happening and by looking at the other topics it's not only me. so is it the new itunes 7 software? and does anyone know what file i need to back up if i want to keep all my itunes libary data? and does anyone know anyways to get the data back?
p.s i still have the music files but i still want to keep all my play counts, ratings and so on.
p.s.s i am not a happy bunny
i have found my music library.itl i think by running a search but what i want to know is how do i put it back on itunes?
Similar Messages
-
my phone has switched off for the second time this week, however when connecting to itunes the restore process wont complete. the error is 2006 however i have tried a number of USB cords, and none seem to be working.
I am in the noerthern [parts of australia and accessing an apple store is not possiable for another month. this is my only soucrce or telecommunication. please helpThis is what it says about error 2006
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service. -
I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!
If you want to use it, click Review and check your account information. Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.
-
ITunes 10.5.2.11 doesn't launch for the second time on Windows 7, 64 bit.
I have iTunes 10.5.2.11(The latest as of now) on a WIndows 7, 64 bit PC. iTunes launches itself properly for the first time after my system boots, but, when I close iTunes and try to open it once again(without booting again), it's like the computer didn't get my instruction, the iTunes icon only clicks, but, it doesn't open. When I check the running programs with the Task Manager, iTunes isn't there. But, in processes, iTunes *32 is listed(This is after I tried launching it for the second time). If I end this process(and also the process tree), and then try to open iTunes, the window of iTunes appears, but, it just sits there like a brick!
Can somebody please help me. Thank you.I have iTunes 10.5.2.11(The latest as of now) on a WIndows 7, 64 bit PC. iTunes launches itself properly for the first time after my system boots, but, when I close iTunes and try to open it once again(without booting again), it's like the computer didn't get my instruction, the iTunes icon only clicks, but, it doesn't open. When I check the running programs with the Task Manager, iTunes isn't there. But, in processes, iTunes *32 is listed(This is after I tried launching it for the second time). If I end this process(and also the process tree), and then try to open iTunes, the window of iTunes appears, but, it just sits there like a brick!
Can somebody please help me. Thank you. -
I have restored my iphone 5 for the second time today, and it keeps crushing after 1hour of having completely restored it through iTunes. What am I supposed to do? I deleted some apps I had recently installed, even changed the background refresh. What else?
Well... it said iPhone Recovery Mode, and I pressed 'Restore iPhone' after which it asked me if I am sure that I want to restore the phone to factory settings, I pressed 'yes'. After 20-30min it eventually came to the 'Hello' page where I had to sign in with my Apple ID, and then saw the icons of each of my apps. which one by one turned from grey to their full colour as they downloaded one by one. After 1-2 hours of having completed all the app downloads, I found the phone shut and could not turn it on with the normal way. And this happened after 2 restore sessions. Is there something I need to do, or I need to request a replacement. I have had the phone for 11months, and crushing problems begun on the 13 of Nov, which was a few days after I updated to iOS7. But today is already 48hours since I have not been able to use my iPhone properly.
-
For the second time this week i don't get any sound from my iPad 2. Who has the solution for this problem?
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
For the second time in two weeks, my Iphone 4s has lost all my contact names. The phone numbers still remain without any of the names, What is causing this to happen?
1. I assume that that suggests that it is not normal for a browser window to respond with minimisation? It is just weird when a window just disappears, no reason given (and since there is no obvious loss of internet it can take you by chance)
2. Good that you ask. No, it hasn't. I meant to say when I first posted.
3. Thanks, I gather that. It is just that Mavericks is so different from what I am used to. Sigh...
4. It has calmed down but there is absolutely no rhyme or reason to it. Forgot to mention that I had my first ever crash of Final Cut Pro since I have been using it nearly daily for four years. I even had Chrome crash on me in mid-upload (drat, drat, drat!). I don't click or plough on- I stop, think and consider. Hence me posting. Mavericks is just not as "smooth" as Snow Leopard to me.
5. Yes, I understand. I just wish it would show me both instead of just the one with the "1".
Tell me about it! It is impossible, I came here to answer via the link in the emailed notification, was already signed out and signed in and was returned to the front page. Had to go back to my Mail, click the link again and this time, luckily, I was signed in. In other words- the session is impossibly short and signing in doesn't return you to the browser window you were but rather returns you to the front. Meh. -
Palm Desktop 6.2.2 Datebook has lost 98% of future entries for the second time
For the second time in a couple months when I opened the Datebook in Palm Desktop running on my PC (running XP) almost all the entries after May 18th are missing. My last hot sync was June 10th - no errors were reported. Each time I make an entry in any of the Palm Desktop apps I save. I hot sync each evening when entries are made. Only the Datebook seems to be affected. I have a Palm Centro thru AT&T.
Post relates to: Centro (AT&T)I solved the problem. I no longer use the Palm Desktop. I changed my hotsync conduit to Outlook, re-synced and everything transfered over without a hitch. The missing Calendar entries were even transferred, Life is now so much easier!
-
For the second time (I've been to the Genius Bar already once with this) my Wifi isn't working. They gave me a new iphone last time, but the new one has the same issue as the old one, I'm guessing. I've tried resetting the network but that doesn't work.
I see others have this issue too.
If this is a hardware problem why doesn't Apple fix it? Or do I just have to wait another year for another upgrade?
Currently it's not costing me anything - yet - because I've got the Apple Warranty but this is totally frustating!!! I bought the original phone (which has been replaced in July 2012. The new phone (without working Wifi) is a month old.
Will try Restore via ITunes before (I will invariably) have to return to the Genius Bar for another Iphone 4S unless someone has an ingenius solution here?..?sematson wrote:
If this is a hardware problem why doesn't Apple fix it? Or do I just have to wait another year for another upgrade?
For what reason, other than making yourself look foolish, would you ask questions that we users could not possibly answer as we're NOT Apple?
Basics from the manual are restart, reset, restore from backup, restore as NEW. Nothing more "ingenius" to suggest than these steps that Apple has outlined in the manual. If these steps don't work, then go back to the Apple store. -
2009 MBP can't see internal hard drive - for the second time!
Well, my 2009 13" MBP is at Applecare for the second time because it cannot recognize _any_ internal hard drive.
The first repair came at 9 months (purchased new), now 16 months later I have the same issue.
Swap in a known good drive, it can't see it, boot from DVD, and run Disk Utility, it can't see it either (optical drive shows up fine)
My first repair only said they replaced the original hard drive, has anyone else had the issue of losing access to your internal hard drive?
Ugh, I will be out of the 3 year Applecare next summer, and don't want to get stuck with another iBook G3, if you know what I mean.
Thanks for any feedback!Hi
I have the same issue, I have a Vodafone branded Huawei HG556a with an external drive connected. I have found that it isn't possible to connect via Finder and that SMB doesn't work either. The only way I could connect to it was via FTP using Cyberduck (or Filezilla), but no use as I can't add my media files from the drive to iTunes, so unfortunately disappointing. I'm still looking, but here's the document I was referred too from another forum.
broadband.vodafone.ie/download/files/storage_mac.pdf
Although not an answer to your question, hopefully this will give you an idea why you are getting the password and username errors when you know they are correct. In the end when I entered the FTP details into Cyberduck I was able to connect.
I know this doesn't help solve the problem (as I'm still looking too), but at leas you know why (ish).
Cheers
Topes -
Will some explain why apple for the second time manage to screw up and delete "all my play lists and music again"! How can I restore it or get my music back... If I can't get my music back the way it was the last time I used itunes I will sale both my ipod touches!!!
Just what were you doing when it happened?
Just sync it from your iTunes library.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Scroller not appearing in the popup when opened for the second time
Hi,
I have a popup window which has three tabs A, B, and C. My tab A has BorderContainer > Scroller > Vgroup
When opened for the first time, I can see the scroller. But , when opened for the second time, the scroller does not appear and the content in th Border container seems truncated.
Please help.No answers, but I may be seeing something similar.
I'm converting a project from Flex 3 to 4. In a popup (Spark TitleWindow) I have a some TabNavigators. On subsequent openings of the popup, the contents of the navigator children don't always render. After some changing of various Halo components to their Spark equivalents, I thought the problem had gone away. But the problem seems to have come back.
In my case, I'm not sure if the "subsequent opening" is the key issue. Sometimes, the contents of nested TabNaviagtor children don't render on the first opening. although the first child content always renders. But the problem seems to increase in subsequent openings. (I.e. more children of TabNavigators don't render.)
Perhaps not connected, but I notice when this happens, the outside borders of dataGrid components don't render in components outside of TabNavigators. I suspect there's a simple thing I need to to do to fix this, but I haven't found it. Any hints or insights would be welcomed. -
After Photoshop Elements quit working for the second time in three months, I uninstalled it and now cannot get it to reinstall from the disc. Nothing happens when I insert the disc. All I can do is look at the folders and files and see nothing that tells me how to start the installation. Clicking "open with Auto play" gives me irrelevant options, view photos, share, etc. I'm running Windows 8. This program has worked, although buggy, for the past year.
reinstall by clicking setup on your disk or downloading and installing,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
IPod 6th gen deletes everything off itself out of blue, for the second time
Hello,
I have a June 2008-bought 6 gen 80 Gb iPod classic and, knock on wood, it's the first one I've had that didn't die on me within a year. However, I am experiencing an annoying problem with it. This happened for the second time: iTunes freezes at the point I'm adding songs to the iPod and the moment it unfreezes, there's nothing on my iPod and I have to start over. Does anyone have an idea what is wrong and how should I prevent this, as it's obviously annoying?So, I did all that and started filling the iPod. At some point when it was 1/4 full, iTunes froze and started "verifying" it. I plugged it out, but too late, it said there was no music on it.
However, when I plug it in, it shows that the amount of space I used is actually taken...but not by music. This is getting odd.
Is the problem any clearer now? -
You block my hotmail account for the second time
you don't have the right to block my hotmail account for the second time and for no reason.
you have the worst customer service system ever, it's not respectable.
I think my new E-mail will not be with you.Lots of Mikes in this thread!
MichaelRizk: I dont speak or write Arabic so hopefully you can understand an English response.
This is the TechNet Website Feedback forum, and here we know things about the TechNet Website and the TechNet Subscription. Microsoft has a lot of products and a lot of separate teams that work on those products.
The link Mike provided for you is exactly where you need to go to get help, and where you have the best chance to get an explanation for whatever happened to your Hotmail account. Here we don't know anything about Hotmail.
Good luck!
Thanks,
Mike
Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support
Maybe you are looking for
-
Downloaded Adobe Reader to I Pad 2. The PDF file is still not opening.
This is what the file says when I attempt to open it. I copied the first web link and downloaded Adobe Reader from there. Please wait... If this message is not eventually replaced by the proper contents of the document, your PDF viewer may not be abl
-
Updated to OSX 10.4.6-now all apps crash when trying to print
I updated to OSX 10.4.6 and now every time I try to print applications crash. My printer is an Hp 5100tn connected through ethernet. I tried all of the recommended fixes, repair permissions, rebooting, replace the printer queue, etc. This is a HUGE p
-
I don't know if anyone can help, but I have had some VERY strange Powerbook this afternoon while doing some Word processing. I was doing a quick search on the internet, when web pages would not load and applications became EXTREMELY SLOW. It was almo
-
Panel field display when process is running
I am developing a program that needs to update the panel to give status information about a process that is running. SO far the panel only appears to repaint when the process completes - is there a way to force a repaint without a break in a process?
-
HT1338 why the map in iphone 5 its not working here United Arab Emirates
why the map in iphone 5 its not working here United Arab Emirates