For those of us WAY down on the list ....

I only managed to get to BB at 5:30 PM on the 15th and was told I was number 115 on the list !!! I was told notto get my hopes up, and I understand. People here that are #10 in line are still hoping. My question is to Jacob - I know I am screwed on getting a phone on launch day - which is OK - but how long do you think I will have to wait? I ordered a black 32g. I can wait a week or so, but if it takes much longer, then I will be upset. How could Best Buy take so many preorders? They could not possibly think Apple would ship so many. My store is #347 in Lafayette, LA if you have additional info. Thanks in advance. Hope everyone gets one soon!

Unfortunately, we have no information on additional shipments yet. Sorry!
Jacob|Web Planner | Best Buy® Corporate

Similar Messages

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yel

I have adobe Premiere Elements 13. It will not let me delete audio or have it fade in or out. I can move the yellow line all the way down till the volume reads -0.0, but the sound is still there on playback. I can click on fade in and fade out and the yellow line that graphs volume takes a sharp raise or dip at the beginning or end of the clip, but there is no change in volume when I play back. What am I doing wrong?

rickeyt
Thanks for the reply. Great news about the volume adjusts.
Now about those fades for the volume. How are you doing that?
1. Right click the Timeline video audio and select Fade and then
see the Fade options (I had a video with audio file, so I saw the choices as shown in the screenshot)
2. You can also create two volume keyframes at each end of the Timeline audio clip rubberband (orange line that goes horizontally across the middle of the audio clip). At the position of the Timeline Indicator, click the Add/Remove Keyframe icon, and then with the mouse cursor position the white dots (volume keyframes) to achieve the Fade In and Fade Out audio. In the screenshot below I have moved the Timeline Indicator so that you could better see the white dots (volume keyframes).
Please let us know if any of the above works for you with regard to the audio fades.
Thank you.
ATR

1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

In Mail, is there a way to print the list of mail activity in a folder without actually printing each email?

In Mail, is there a way to print the list of mail activity in a folder without actually printing each email?
Thanks to all.

Actually, I noticed in "More Like This" questions similar to mine. One of the suggestions worked perfectly.
Command Shift 4 turns the arrow into a target scope. Use it to take a screen shot of the area you want printed. Thanks to all.

Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

Is there a way to find the list of PCs and iDevices connected to my Itunes Match?

Is there any way to get the list of Essbase and planning users in excel wi

Is there any way to get the list of Essbase and planning users in excel with last login details.

Hi,
This tool might be of some help to you, 'OlapUnderground Advanced Security Manager'. I havent used it personally but went through its features. Give it a try!
Thanks,
Junaid

I used to have an RSS feed to a blog site which is protected by a username and password rembered by Firefox. I am now asked for those details when trying to enter the blog and despite entering them correctly I am denied entry.

My old server (5.5. years) was failing me and loosing some random items. I have accessed this blog site for the past three years and during that period the access passwords and user names have been changed several times. Each time I asked Firefox to remember the correct details and I gained entry with no problems. Before I replaced the equipment I was continually refused entry despite entering all the correct information. I received a message telling me that I was either not entering the correct information (which according to the Blog editor I was) or that my server did not know how to connect to the RSS feed.

Try BottomFeeder for those live feeds.
* BottomFeeder: http://www.cincomsmalltalk.com/BottomFeeder/

One small error but it is the same error all the way down through the if's

This program is so close to finally running after I have spent well over 8 hours trying to figure out the code now I am getting an aggravating error saying " ; " expected all the way down throughout my if statements. Can anyone please tell me what to do to get this program to run? I am so close.
Here is my code:
import javax.swing.JOptionPane;
public class CustomerStatus {
public static void main(String[] args) {
int option = JOptionPane.YES_OPTION;
int hiatustime;
int purchasenumber=1;
int loyaltime=0;
String status="";
System.out.println("Purchase Number\t Time before next purchase(months)\tTotal Customer Loyalty(months)\tStatus History");
System.out.println(1 +"\t\t " + 0 + "\t\t\t\t\t" + 0 + "\t\t\t\t" + "STANDARD");
while(option==JOptionPane.YES_OPTION){
hiatustime=Integer.parseInt(JOptionPane.showInputDialog(null, "Enter in the time between purchases(in months): "));
purchasenumber++;
loyaltime+=hiatustime;
If((loyaltime >= 10) && (hiatustime <=6))
status="PLATINUM";
If((loyaltime >= 10) && (hiatustime > 6) && (hiatustime <= 12))
status="GOLD";
If((loyaltime >= 10) && (hiatustime > 12) && (hiatustime <= 18))
status="SILVER";
If((loyaltime >= 10) && (hiatustime > 18) && (hiatustime <= 24))
status="BRONZE";
If((loyaltime >= 10) && (hiatustime > 24))
status="STANDARD";
If((loyaltime < 10) && (loyaltime >= 5) && (hiatustime <= 6))
status="GOLD";
If((loyaltime < 10) && (loyaltime >= 5) && (hiatustime <= 12) && (hiatustime > 6))
status"SILVER";
If((loyaltime < 10) && (loyaltime >= 5) && (hiatustime <= 18) && (hiatustime > 12))
status="BRONZE";
If((loyaltime < 10) && (loyaltime >= 5) && (hiatustime > 18))
status="STANDARD";
If((loyaltime < 5) && (loyaltime >= 1) && (hiatustime <= 6))
status="SILVER";
If((loyaltime < 5) && (loyaltime >= 1) && (hiatustime <= 12) && (hiatustime > 6))
status="BRONZE";
If((loyaltime < 5) && (loyaltime >= 1) && (hiatustime > 12))
status="STANDARD";
If((loyaltime < 1) && (hiatustime >= 0))
status="STANDARD";
System.out.println(purchasenumber +"\t\t" + hiatustime + "\t\t\t\t\t" + loyaltime + "\t\t\t\t" + status);
option = JOptionPane.showConfirmDialog(null, "Would you like to enter any more time between purchases(in months)? ");
}

hey duke, you're back :)
can you please enclose the whole code in a block. it's hard on the eyes

Downloaded ringtone, from iTunes store, is so loud! Volume is all the way down, but the ringtone is crazy loud. Help?!

I downloaded a ringtone from the iTunes store and set it as my text tone. Cool, right? Well, IT'S SO LOUD. My volume is all the way down and people clear across the building can hear it! What can I do?

You should have gotten a user manual. If the manual is of no help, contact the manufacturer.

I have the new Air Port Extreeme model A1521 and I need to set up port forwarding for HTTP. HTTP is not on the list in the set up. Does anyone know if any of those choices work for HTTP?

I am on a Windows 7 Ultimate PC and right now there is no Airport utility for setting up the new Apple Extreme so you have to do it on your iPad or iPhone. Does anyone know how to set up port forwarding for HTTP to get to DVR security cameras? There is nothing in the list that indicates HTTP port forwarding.

Thanks for your reply Tesserax as I did figure this out on my own. It took a bit because all of the options are not clear what they are for like the previous Airport Extreme and Apple does not support or guarantee that port forwarding will work for you application nor did any of the Apple support persons I spoke too have any knowledge for this feature. You also have to fill in the public if you are viewing through someone else's Wi-Fi or on your cell phone carrier network. This new Airport Extreme is a bit different since you cannot use the Airport utility on a PC like the older model and if anyone else is reading this they should be aware that if you do not have an Apple computer, iPhone or iPad and I'm not sure if some of the other network enabled devices like iPod Touch that you must use that can do it, there is no Airport utility for the PC and you would be wasting your money or have to take it back and get another brand wireless router to use if you do not own any of the above mentioned Apple products.

For those having EAP auth issue using the ACS appliance

Thought I'd pass along my config and resolution to an issue I was having concerning EAP-TLS auth on an ACS appliance.
We have two ACS Solution Engines (3.2.2) running and doing a database synch and using Generic LDAP as the external database. We did the certificate walk through for the ACS and then turned on EAP-TLS auth. We are trying to use EAP-TLS auth for wireless access through our AP1200s and Windows XP laptops, but we kept getting errors.
After digging for days I found out that when you request a certificate it pulls the CN name. Our CN name in Active Directory did not match our login name. I changed my CN name to match my login name and I was then able to grab a certificate and authenticate using EAP-TLS for our wireless.
I am in the process of upgrading our ACSes to ver 3.3.2 so that I can run the Remote Agent for Windows on a Windos 2003 server and then use the Windows database as the external database and not Generic LDAP.
I hope this helps someone!
Jeff

The document discusses the Extensible Authentication Protocol Transport Layer Security (EAP-TLS) authentication protocol deployment in wireless networks.
http://www.cisco.com/warp/public/cc/pd/sqsw/sq/tech/acstl_wp.htm

In the Podcasts app, is there any way to remove the list of recent podcasts that can be downloaded?

Hi there,
I'm wondering whether there's any way to remove all those recent podcasts (either unplayed or only partially played) listed as downloadable from the Podcasts app on the iPhone. If I'd wanted all these additional episodes on the phone, I would have put them there. I don't want them there, yet the app insists upon larding up my podcast lists with these useless episodes. Nor do I want to mark them all as "played." There's a reason some of them are only partially played and others not at all. I prefer to keep them marked that way in my master list. But I do not want them on the iPhone.
I've tried searching online, but am not coming up with a solution. Do I have to go to some third-party app to have cleaner, tidier, and smaller lists? When I intend to carry around only three or four episodes for a given podcast, it is really REALLY annoying to have to pick through a list of forty-some-odd offerings to find the ones I want.
I sure am hoping some techie-inclined soul has a solution for me.
Odile

we are working on server to server APIs that will allow you to fetch data (items) from node.
when that is available you'll be able to get the user list from the UserManager node.

I have my download list but I deleted the file on my computer and want it back, is there a way of using the list to get it back?

I have the download list for firefox but accidentally deleted the file on my computer. I need the file and was wondering if there was a way of using the download list to access the file somehow, I don't think the file os on the internet either as I haven't found it

Hello!<br>
Go to the downloads window, right-click, and click "copy download link" or "go to download page". You should then be able to re-download it only if it's still in the downloads window

New Release list/Music - Is there a way to alphabetize the list?

Until this month, the list of new releases (text columns) were always sorted by the store in an alphabetical order format. For some reason, the list is no longer sorted this way or any other particular way. Have any of you customers found a way to sort the comprehensive list in an effort to return it to an alphabetical array? Unfortunately, it does not seem manually possible to do this from my observations so far.

Currently, there's no option to alphabetize Faces, other than dragging them around manually.
Photos, in general, has few options for sorting. I hope that changes soon...

Is there a way to get the list of ALL user exits in ECC 5.0 or 6.0

Is this list published somewhere by SAP or can we get it from the system somehow? I m not talking about Enhancement or BADI's just user exits.
Thanks for reading

Hi ,
Just check this program to get the list
Hi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.
Thnks
Abhishek

For those of us WAY down on the list ....

Similar Messages

Maybe you are looking for