For those of you having problems printing images/pdf

I spent awhile figuring this out as my Samsung ML-1630 printed text from TextEdit fine via Time Capsule USB, but I kept getting either errors or nothing at all when I attempted to print a PDF, web page, or image. Here is how I got it to work (I have only tested it on a Samsung ML-160 printer, but it should work for others having similar problems)
1. Open "Print & Fax" in System Prefs
2. Add a new printer.
3. (important!) Choose IP at the top.
4. For "Protocol" choose "HP Jetdirect - Socket"
5. For "Address" use the local IP address of your Time Capsule - you can find this by opening the AirPort Utility -- mine was 10.0.1.1 by default.
6. For "Print Using" select your printer driver
7. Click "Add" and you should be able to print anything now
This workaround is probably due to a driver issue, but I am not for certain.

Thanks,
This worked for printing images, but it is PAINFULLY slow. took 3 minutes or more to print a simple graphic file
Message was edited by: AceMT

Similar Messages

  • For those of you having intermittent connection to the internet

    If you have a linksys router and having intermittent connection to the internet, here's how.
    Be sure to have a LAN cable plug into your router and macbook.
    (This is very important if you do not want to get disconnected from the router)
    1) Navigate to http://192.168.1.1
    2) Go to the Wireless tab, under the Advance Wireless Settings tab, change the beacon interval to 50, RTS to 2304 and Fragmention to 2305, save the settings.
    3) When you login into your router page, it first direct you to the setup page, look under MTU, set it to 1300. save it.
    Note that if you are still having intermittent connection to the internet, another alternative is setting your MTU to 1365.
    That's it, 3 easy steps to get you freed from the frustration.
    Cheers for all those having the same problem like me solved.

    Hi,
    I dunno if this will help any of you, but here it comes:
    I purchased the Airport 'N' enabler just a week before I upgraded to OSX 10.4.10. And - of course - after the OS update I had the similar issue with dropping Wifi connections and very slow speed, although (*Touch Wood*) I didn't have any Kernel Panics.
    After updating to OS 10.4.10, System Profiler and Network Utility showed that I had the 'n' enabled, but the speed and (lack of) stability of the Wifi connection can only be described as 'Hair-ripping'.
    Anyway, after reading through all the threads/topics of all you poor sods with similar problems and utilising somewhat 'hairy' workarounds with varying results, I realized that nobody acually tried to re-install the 'N'-enabler again; at least as far as I recall..
    So, I simply installed the 'N'-enabler again AFTER updating to 10.4.10 !!! I was kind of expecting the installer to prompt me, saying that "this computer already has Airport Extreme 'N'-enabler installed" blah-blah.., but it didn't.
    And now I have a very stable connection and MUCH faster download speeds as well !
    So those of you who hasn't tried this yet, please do. It might work for you as well ... !!
    Just me 2 cents

  • For those of you having trouble Ripping DVD's importing to itunes etc.

    I've read quite a few posts about people not being able to rip/convert or upload to itunes, I am one of these people, but managed to figure it out. No one seemed to be able to help me, so here you go guys and gals.
    To put DVD's on your ipod video you'll first have to rip them to your computer. I downloaded Handbrake for mac and it works perfectly. Follow these steps and all should be good....
    Once you have Handbrake downloaded, which takes round about 5 mins. Load your DVD Moive, tv series etc. Just close the DVD player if it automatically starts.
    Open Handbrake, select "Detected Volume" and click open.
    Once that's done, then it will take you to the main screen.
    Under "Source" select which part of the DVD you want to rip.
    If it's a comedy DVD then you'll want to select which episode you want to copy, 1,2,3,4....etc.
    Then under "Destination" click "browse" and select where you want the ripped
    video to save. I just stick them all in "Moives"
    Finally at the bottom click "Picture settings" which is where some people may be having problems. When you click that, you'll see a preview screen of the DVD, and it will be quite large. On the Right reduce the size right down to 256, and you'll see the picture size is pretty much set for the size of an ipod screen.
    Click close, and then hit "Rip"
    Once completed as it does take a bit of time. Close Handbrake and load Itunes, click "Videos" on the left. Then "File" and click "Add to library" and you can add your copied video depending on where you've saved it
    And that's pretty much it for copying DVD's
    For other files such as MPEG's use Isquint, it's tops and easy.
    All done

    How can I change my file extension from m4p to something else? I have had no success being able to play or burn my purchased music. I keep getting error 2122. If I can change the format I should be able to move it to another player or at least burn it in Nero. Thanks.
    Angie

  • Sorry for my ignorance but i'm having problems printing

    Hi
    I am very new to indesign and to print graphics.  I am not new to web graphics.
    I am having problems printing a document that I have created in InDesign CS5.  Now I have learnt that I need to calibrate stuff with ICC profiles but I am not sure what I am doing.
    Do i need to create aan ICC profile for my monitor and printer?
    How do I get these to worl with InDesign?
    I suppose I need to tell you what is going on.   When I print my document which is mostly different shades of grey, most of the different grey shades are nearly black and I can only just see the differentces in shades between the grays.  Now on my monitor they are distinctly different and can easily be seen.
    So what steps do I nee dto get these colours right?
    Cheers

    For good reproduction you need an accurate monitor profile (this is done with a colorimeter or spectrophotometer --that's overkill for just the monitor, but it can do the printer, too -- and profiling software) and an output profile for the printer and paper combination. The industry standard EyeOne colorimeter package is around $200, the spectrophotometer will cost quite a bit more.
    There are services that will profile your printer for you, too, but learing to do it yourself will cost less over the long haul if you are really serious about the output quality. In theory you need to recalibrate and profile printers on a regular basis, especially when you change ink or toner. Out here in the real world, though, I suspect most of us who are not producing commercial color output just do it once and live with it until the results are no longer acceptable and the profiles need to be updated. I proof for internal use on my color laser, for example, and it hasn't been re-profiled for about three years. It no longer matches waht I see on the monitor exactly, but it's still fairly close and the prints are for my own use. I always get a proof from the printer when it's time to go to press.
    Of course not all monitors and not all printers are created equal. Some monitors are incapable of showing fine gradtions in sahding in the dark or very light grays, and many, if not most, printers can't capture all of the shades you can see on screen.
    For any given printer resolution, such as a 600 dpi printer, the higher the linescreen value used to print, the lower the number of shades that can actually be produced. Halftone spots (which is what are used to fool you into seeing gray using only black ink) are made up of groups of printer dots, and you can't print half a printer dot, so, for example, 600 dpi printer outputting at 100 lines per inch linescreen, uses about 36 printer dots to make each halftone spot (it might be a little different because the shape of the halftone spot is seldom a square). The best you can get from 36 printer dots is 37 levels (no dots to all dots), so the best you can hope for is about 3% steps.
    Add in dot gain, the spread of ink or toner as it's absorbed into the paper and which is more prominent at darker shades, and your shadows tend to plug up, and the very light shades may not show at all. Less than 5% dot, for example is extremely hard to print on most lasers.
    A really good book on the subject is Real World Scanning and Halftones, and a great book on color management in general is Real World Color Management.

  • I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    Hi,
    Apple's AirPrint only support specific models while using wired or wireless network connection.
    Plugging a printer into a USB port of Apple base is not supported for AirPrint:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
    http://support.apple.com/kb/ht4356
    There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
    http://www.ecamm.com/mac/printopia/

  • I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

    I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

    Hello,
    Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
    Regards,
    Nakul

  • Still having problems with images

    I am still having problems putting images into an Oracle 9i database and fetching them back out.
    I think I have finally managed to force a blob image into the database, but can't seem to get it back out into a byte array.
    After many iterations, I have come up with something that might be getting close.
    The code is listed below.
    Everything has been simplified as much as I can.
    The function get_user_picture_func1 returns a single blob for a specified index.
    In this case, I have hardcoded the index = 3 and I think there is an image in the database for that index. (it says there are bytes there anyway).
    The byte array to store the image is defined outside the method fetchImage().
    byte[] imageData;
    When I call fetchImage() I get the following exception:
    Invalid argument(s) in call: getBytes().
    at the line
    imageData = picture.getBytes(zro, k);
    It looks like getBytes has two parameters, Long offset, int length.
    I had diagnostic statements and I confirmed that the statement:
    int k = (int)picture.length(); returned k=4198 (the same size as the image).
    I am at a loss to understand what the exception is trying to tell me.
    I'be been trying to get this to work for a week now and am really getting burned out trying to find anything that works.
    void fetchImage()
    Blob picture;
    String query = "{ ? = call get_user_picture_func1( ? ) }";
    try
    CallableStatement cs = con.prepareCall( query );
    cs.registerOutParameter(1, OracleTypes.BLOB);
    cs.setInt(2,3);
    cs.execute();
    picture = cs.getBlob(1);
    if( picture != null)
    InputStream in = picture.getBinaryStream();
    int k = (int)picture.length();
    imageData = new byte[k];
    long zro = 0;
    imageData = picture.getBytes(zro, k);
    catch( Exception e)
    }

    I have been using my iPad mini with keynote to make slide presentations in  my classes.There has been no problem until I upgraded to Keynote 5.3. Now the refresh rate on the iPad mini is so slow and out of sync with the projected image that I was forced to not use keynote! I have 2 years of work invested that I will have to toss unless this gets fxed. I have not had this problem with this equipment/files before. Only change was upgrade to keynote 5.3. ( Some details: I connect to the projector with a  VGA cable and Apple lightining adaptor to the iPad Mini. All updates current on theiPad Mini.)  Yes I did turn on and off all equipment. And I did check all cable connections. Thanks for any help you may give!

  • Anyone having problems printing with aps?

    Any one having problems printing while using an ap?

    you need the drivers...
    win 7 32 bit:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=439154&p...
    win 7 64 bit:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=439154&p...
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • For those of you who have the "Perfect Timing" ringtone from the commercial

    I posted this in the plain 'ol phone forum but haven't got a response yet. I hope I get one here.
    For those of you who have the ringtone from the iPhone TV commercial -- do you remember what portion of the song (or can you check in iTunes) you used for the actual ringtone? If you could tell me the counter (in seconds and minutes) that you started and ended your tone at, that would be great. I'm trying to get it exactly like the commerical but I don't think I have it just right. Thanks! By the way the song is called "Perfect Timing."

    "I downloaded the free version of malwarebytes and ran it when my computer was in safe mode, which found 93 malware "issues" on my computer."
    ...and you're surprised that you had installation issues with iTunes?  This makes me wonder whether others who report problems installing iTunes have computers that are equally infected!  For reference, I just checked the logs from the last Malwarebytes scan (I run an automated scan twice a week) on my main iTunes system (on which, like the other iTunes instances I run, never seems to suffer from any installation issues) - zero issues

  • Are you having problems with the Lacie external drive after upgrading to the new operating system

    Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

    See here for everyone discussing the issue you are having:
    https://discussions.apple.com/thread/5475136?tstart=0

  • Having problem printing to hp officejet pro 8500 since updated to yosemite. any help please?

    I am having problem printing to Hp Officejet pro 8500 printer, it says it is in use. I never had any problem until Yosemite update. Any ideas please?

    I had the same problem with a HP 4000 laser jet & SL, this is how I solved it
    http://www.macworld.com/article/142631/2009/09/snowleopard_printing.html

  • I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand.

    I am having problems opening images renerated in lightroom5 into cs6. Cs6 bridge does not see the lightroom libarary. If I open lightroom and right clik the image, edit in cs6, 6 opens but the picture doesnot follow. What is going on? Give me a hand, thanks.

    What edition of LR 5? What edition of ACR does PSCS 6 contain. If they are not parallel (same edition number x in [5 or 8].x ), is LR making a tiff or psd rendition of the image?

  • I am having problems printing a Keynote file to a Keyocera c3232

    I am having problems printing a Keynote file to a Keyocera c3232. 
    Its a 100MB file sent from a Mac Pro 2 x 2.4 GHz Quad Core to a the C3232 which has 768MB of memory installed. 
    I have even optizmized the PDF down to 30 mb and still taking about a 40 mins.  Just got a "Unable to send Trailing nul to printer. Broken Pipe"
    any ideas folks. I can run the same files to a big production machine and it takes 5 mins to print at the most.
    help!

    same thing at 10.7.3!
    brilliant paing with iphone and ipad
    otherwise no sound with imac

  • For those of you waiting...

    Just an FYI for those of you that are waiting for Merom, it may not be worth it. Although the chip is 64-bit the chipset that is currently out is still only 32. The Santa Rosa chipset is due to come out in the spring which will be 64-bit. Could be why Apple isn't upgrading, they aren't in to "tricking you" like everyone else. So for those of you waiting thinking it will come out any day now, think again. The good news is that even if you don't get a 64 bit system it is going to take a long time for you so really need one since software would still have to catch up.

    Bsmit007 is right about 40-bit real support in Core 2 Duo's. However, the thing is that with a pseudo 64-bit support it would be possible to run Windows XP 64-bit OS as well as 64-bit Vista. I'm sure Mac OSX is much better, but I need flexibility with running all sorts of programs. I'm currently looking for a laptop to buy, and have some doubts whether I should wait for Core 2 Duo or not. It's not about performance (which will be just 5% - 7% faster in real life apps), it's rather about the hassle I'll have at the time of the next upgrade.
    My question is what chipsets current MBP's motherboards are running on and whether the CPU has a BGA or PGA Socket-M interfase?(which allows to change the CPU). For example, if it's an Intel 945GM or PM chipset, then I could buy MBP now, and in half a year time swap the CPU for Core 2 Duo along with other upgrades, such as memory, HDD and etc.
    Cheers,
    Ayrat.
    Looking for one...    

  • For those of you using two hard drives..........

    I have two hard drives, and really want to set them up properly so that logic is running on the main drive, and the secondary drive is for audio/samples etc. So for those of you that have done this, what is the best way? Specifically -
    1. For the EXS24- do BOTH the instruments and samples folder need to go on the secondary drive?
    2. If you've already been using one drive for everything, how do you re-train logic to see the exs/audio folders on the secondary drive? Is it just a matter of moving them and then redirecting logic when it can't find the files?
    Your input on the best way to utilize two drives is most appreciated - what has worked for you, and what hasn't.

    . For the EXS24- do BOTH the instruments and samples folder
    need to go on the secondary drive?
    Leave the instruments folder where it is, and put your samples folder on the external drive.
    You can alias the instruments folder to whereever you want, but you don't really get any performance advantages doing so.
    2. If you've already been using one drive for everything, how do you
    re-train logic to see the exs/audio folders on the secondary drive?
    Two things to note - you don't need to do anything. When the EXS24 loads an instrument, if the samples are not at the location specified in the instrument, it will search for them, and when it finds them, it will write the new location back to the instrument so next time it won't have to search.
    So, if you've moved your sample folders, the first time you access an instrument it will take some time to load while Logic hunts for the samples. Subsequent loads of that instrument will be as fast as ever.
    Now, you can use the Project Manager (or Redmatica's EXSManager) to do this relinking for you across multiple instruments or your whole library.
    In the PM, do an expanded scan. Then, select your instruments, and choose the "resolve samples" function - Logic will relink instruments with their samples and update the instrument files with the new locations. This can take some time with a big library.
    Any more questions, post back.

Maybe you are looking for