For those people that have a issue with MSI DVD that won't work right
I have an MSI K9 SLI Platium 7250 w/ an AMD Athlon X2 4600+ 2.4 GHz. I have MSIDVD that originaly came with my old Motherboard MS-680E AMD Atlon XP 1700+ 1.4GHz. When I upgraded MSIDVD wouldn't work right and every time I Would insert a a DVD MSIDVD would give a wierd error. But here a hint how to bypass. As long as you have MSIDVD installed you should be able to play DVD's through Windows Media Player without any problems, thats what I was able to do. Or if you still want to use MSIDVD, you need to download a program from AMD, here are the detales, I also done this too
The Program is called "AMD Dual-Core Optimizer"
The AMD Dual-Core Optimizer can help improve some PC gaming video performance by compensating for those applications that bypass the Windows API for timing by directly using the RDTSC (Read Time Stamp Counter) instruction. Applications that rely on RDTSC do not benefit from the logic in the operating system to properly account for the affect of power management mechanisms on the rate at which a processor core's
Time Stamp Counter (TSC) is incremented. The AMD Dual-Core Optimizer helps to correct the resulting video performance effects or other incorrect timing effects that these applications may experience on dual-core processor systems, by periodically adjusting the core time-stamp-counters, so that they are synchronized.
Heres the link http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_13118,00.html
OK, well - I installed Tiger back on a separate disk and will reboot into that when I want to watch a movie. Cheers, all.
Similar Messages
-
I am using pages designing a flow chart, question "I seem to have an issue with the arrows that you can add text to, it appears I can not move the point of the arrows up or down they only switch from left to right.
Last point...who archives? On my regular email page I now have the Archive icon to the left of my Delete icon which I would prefer was to the left, first in the line as this is the icon I use mostly. With Folders, my Sent and Trash lists, who needs to archive?
I can help you only with the placement of the icon placement -- if you right-mouse click on the toolbar, then select Customize Toolbar, you can move an icon to where you want it to be. -
Hi
I have a mac book pro, I need to run a software package that requires Windows Access for it to work
The software is SBEM (A building calculation software)
Any ideas
Many ThanksDirect you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Community
https://discussions.apple.com/community/windows_software/boot_camp
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818 -
I have an issue with a script that places multiple page PDF files...
I'm using a version of "PlaceMultipagePDF.jsx" that I modified to use Media Box when placing the PDF file pages.
That part was easy and works perfectly.
The issue I'm having it that every time it places a PDF page, InDesign pops up a dialog saying that it's Importing pages from "file" and Creating preview with a progress bar. This dialog pops up once for each page, and the UI time it takes to do this is slowing down the import.
So is there any way to turn off this feedback dialog?
Note: I still need to see the dialogs to choose the PDF file and pick the document and page to start placing. I just want the one that displays for each page to not display...I found this in the Developer KB.
But I can't find any of the functions in the Scripting Ref...
How To: Suppress the progress bar when processing a command.
Summary
You can suppress progress bar display by turning it off before processing the command.
Issue
I use the IImportFileCmdData interface and pass kSuppressUI (do not display any UI) as UIFlags. When processing the command, I get a progress bar, which is called "Adobe InDesign Tagged Text Import Filter", whereas I expect no UI.
Solution
To suppress progress bars you should explicitly turn them off before you process the command (or commands).
1. Get the interface IProgressBarManager (it's on kAppBoss, which you can get from gSession).
2. Use IProgressBarManager::SuppressProgressBarDisplay() to turn off the progress bars.
3 .Process the place command(s).
4. Turn the progress bars back on when you're done.
In InDesign 2.x and above, you can also use the SuppressProgressBarDisplay class (ProgressBar.h) class to achieve this. In order to use this class you just need to create an instance of the class on the stack as shown here:
SuppressProgressBarDisplay suppress(kFalse); -
Are you kidding me that your response is I need to create an account?
Call Apple Customer Relations - 1-800-275-2273. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post.
GOOD LUCK!
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other. -
Really strange issue. Only on one project.
If i open the file, i can see logic running through the list of instruments, but the only window that opens is the fixed note length Midi transform window. I cant see the arrange window anywhere!
If i khit play on my midi controller keyboard, i can play the project and hear everything as it should be, but just cant see the arrangement.
If i attempt to close the Midi transform window, it wants to close the who project.
Any ideas on what i do!?
ThanksThanks, but i'd already tried that and it didnt work.
I have managed to fix it though, and for anyone else with the same issue, here is what i did:
Find your Logic project file
Right Click on the project, and choose 'Show Contents'
Open the displayed folder 'LgDoc'
Remove the file 'displayState'
open the project, and all should be good! -
I have iPhone 4. I don't want to upgrade to iOS 7 because people have had issues with that. Is there a way I can just upgrade to iOS 6?
No, it is not possible. When upgrading the iOS on the phone, the only one you can install is the latest version, which for the iPhone 4 is iOS 7.0.4.
-
since i have upgraded to mountain lion i get a popup whenever my system wakes up telling me that my external drive was not ejected properly. i did not have this issue with snowleopard. i leave my hard drive on and connected for use with time machine.
Message was edited by: leroydouglas
better yet, try this solution:
https://discussions.apple.com/message/12351186#12351186 -
I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?
Hi RonWM,
Thanks for visiting Apple Support Communities.
This article lists the ports that are used by the Apple TV:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Best Regards,
Jeremy -
I have an issue with disappearing option for 1920x1080 in Preferences / Displays.
Recently updated to 10.9 - have all updates installed - Mid 2010 iMac 21.5.
I have an issue with disappearing option for 1920x1080 in Preferences / Displays. - After overnight shutdown, my iMac woke up and the screen resolution of my 2nd was set at 800 x 600 - the display a Samsung S22B150 was previously working properly at 1920 x 1080. This option is no longer available in the system preferences - highest resolution available 1600 x 1200.
I use my mMac for Photography and use the second monitor for the interface, leaving the iMac screen as a full work area for the photos.
I have tried:
Power down Monitor & restart
Shutdown & restart
Shutdown & restart in Safe Boot Mode (options same in Prefs)
Power down Monitor & restart in Safe Boot Mode
Ran Disc Utility - Repaired Permissions, verified both HDD & Mac OSX
Udated Pram
I am now at a loss, I guess I could try a recovery, and download/install Mavericks again, but do not wish to do this if I can help it.
I have searched the net to see if there are any Terminal commands to enable the resolution, but can find nothing.
Anyone out there have any ideas, please.Back up all data. Quit System Preferences if it's running.
Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
~/Library/Preferences/ByHost
In the Finder, select
Go ▹ Go to Folder...
from the menu bar. Paste into the box that opens (command-V), then press return. A folder should open. If it does, look for a file with a long name that begins "com.apple.preference.displays2". There may be several such files. Move them to the Trash.
Test. -
I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.
I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!
-
I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"? Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.
I0S 7 draft folder in email exchange is gone...anyone else have an issue with thie "upgrade"? Draft folder is essential for my work as I create in draft folder on laptop/desktop and need that information available on the iPad when I travel.
-
When I upgraded to 10.7.4 I lost the ability to use a lot of my previous software that was intel based. My Adobe suites for example. So for $29 i now have to spend $1000's to get these to work. What has changed with Mountian Lion. I am not rich?
The reason your applications do not work in Lion/Mountain Lion is that they were written for the older PowerPC CPU that all Macs used up to 2006. When Apple made its transition to the Intel CPU, they licensed software that they included in all versions of OS X (from Tiger to Leopard and optionally, Snow Leopard) called Rosetta.
Rosetta miraculously allows PowerPC applications to work on the Intel processor transparently; you do not know it is even present.
The problem is that after 6 years of the transition, Apple's license to use the underlying software expired for OS X Lion and all version thereafter (and it is doubtful that the current owner of the software, IBM, would relicense it, even if Apple were inclined to do so).
So you do not have to accept recriminations from others for previously using Rosetta without even knowing it was present and running!
So for those of use that need to upgrade to Lion/Mountain Lion, I have offered the option to install Snow Leopard (with Rosetta) into Parallels 7:
[click on images to enlarge]
And now Mountain Lion:
If you are unable or unwilling to update your inventory of PowerPC software, this solution offers you an alternative for not more than the $29 cost of Snow Leopard and $79 cost of Parallels (cheaper via internet sources).
Full Snow Leopard installation instructions into Parallels 7 are here:
http://forums.macrumors.com/showthread.php?t=1365439
Assistance with the installation process is available on this linked forum. -
I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?
The battery is fully charged so it is not the problem.
What happens when you use the MagSafe? -
I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
Anyone had these issues?Settings > General > Reset > Reset network settings
Maybe you are looking for
-
Hi guys, I was hoping there might be a feature or add-on that will allow me to automatically print an email after I send it. For the purpose of creating a paper trail we have to print out at least the 1st page of all emails sent to our clients. Love
-
I want to know how can I get hotmail on my iphone
-
i, iPhone 4 shows "!" when sending text with photo. But I can send just the text. Have powered off/on. Tried in different locations. Signal good. Ideas?
-
What to set authorization on characteristic value
HI team I want to set a authorization on characteristic value, to be displayed in Bex report depending on user accessing that report Say : I have one report which show data about company code. I want to set authorization on characteristic value of Co
-
Will the Software Update to 10.4.7 install firmware upgrade for SuperDrive?
Will the Software Update to 10.4.7 install firmware upgrade for a SuperDrive? I have a Mac mini and I've just let the Software Update run as needed, but I am confused by the number of Apple update downloads listed. I don't believe I need them, when I