For Those Who Can't Boot After Upgrading To 10.5.6

For Those Who Can't Boot After Upgrading To 10.5.6
(and i am one of those)
how is Apple supposed to make them able to install future fixes and updates
once they finally acknowledge and address this horrible bug?
will they send free bootable CDs with the updates to 10.5.6?

What "Boot ROM version" do you have (check in the system profiler under "Hardware")? If it's not MBP31.0070.B07 or MBP21.00A5.B08, then you will need to update your MacBook Pro's firmware. To do this, you might need to connect an external display and mouse/keyboard, and then run the computer with the lid closed to bypass the laptop's monitor. Then apply the firmware patch and reboot the system. This might also be doable via "Screen Sharing" if you have that enabled and have another mac handy.
The firmware update is here: http://www.apple.com/downloads/macosx/apple/firmware_hardware/macbookproefifirmw areupdate151.html
Message was edited by: Topher Kessler

Similar Messages

Can't boot after upgrading 3.0.3

Hi,
After processing a yum upgrade of my Oracle VM Server 3.02 -> 3.0.3.My OVM Server hangs and reboot at this step
[    0.893453] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[    0.900517] pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[    0.900936] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold
[    0(XEN) Resetting with ACPI MEMORY or I/O RESET_REG.
I try to boot with pcie_aspm=off kernel parameters but it doesn't work.
Somaeone have any idea ?

A couple things to try. Ask the person if they use Verizon. If so, ask them to do *228 to update their phone. If that's not the case, try deleting the contact and add it back to contacts.

For those who can't hear their fans...

This is pretty much my experience and you could follow my original posts if you care. I'm just going to break it down.
1st MBP - Week 12 build 2.16 1g 7200 which had to be returned because of the 4SN error message during hardware check. With this MBP I never heard my fans rev up no matter how hard I pushed the machine or how uncomfortably hot it got. Also, I noticed that the error would occur whenever the fans didn't turn on during the system test. This was during the week of April 1st. Went to the store and they kindly swapped the machine.
2nd MBP - Week 12 build 2.16 1g 7200 which also had to be returned. This one also had the 4SN error message during the hardware check and I never heard the fans rev up no matter how hard I pushed the machine. I went to the store to return the machine and I was told by a genius that the error is just a software glitch and as long as the machine is working properly then I shouldn't worry. I wasn't happy, but I needed the MBP and decided that I would hold on to it. After a few weeks I noticed the machine slowing down (marginally) and I occasionally had this issue where my screen would go all glitchy and the computer would freeze. This worried me and I returned to the apple store for it to be sent out for repairs. After explaining my problems (strange HD noise, screen flicker) and showing them a pic of the screen issue he the genius said my graphics card is fried and surprisingly, he wanted to swap the machine again (it was 20 days past the return policy date)! That was very nice of them, but I had to settle for a lower model.
3rd MBP - Week 17 build 2.16 1g 5400 which is running great. I had to settle for the 5400 model because apparently, the 7200 model is no longer an option at the store (you can get it on line). This was fine with me because they returned $400 to me due to the lower model and the genius made good points of battery life and heat. Also made me feel better about the whole 17" vs. 15" top model price point. Anyways, on to the fans. I actually hear them rev up at appropriate times and I never recive the 4SN error message.
What does this mean? Well, it's all speculation but, from my experiance you should hear your fans rev up when the computer is being taxed. With each of the 3 machines I did all the same processes and with the first 2 I never heard the fans. I did not keep the first one long enough to notice any process degradation and I'm not saying that there would have been one. As for the second MBP, I did notice degradation and throughout the weeks of owning that machine never once heard the fans rev up. I have had my third MBP for 2 weeks now and the heat is much better and I do hear the fans rev up occasionally.
Anyways, I love the new machine and I hope this helps people understand, a little more, about the fans/4SN error issues.

Yes I still have the whine, but I need to put my head to the keyboard to hear it.

A Suggestion For Those Who Can't Install Flash

Check out Microsoft Silverlight. I just came across it on the web. It downloads in minutes and it runs without problems. It play videos just like Flash and it is free. I am not familiar enough to say that it is a better player. It seems to be at least equivalent. The was only one notable difference: Installing flash, two weeks and counting. Installing Microsoft Silverlight, about five minutes.
If only I had found out sooner my garden would not be so overgrown in weeds.

Are you saying that youb can play Flash objects with Silverlight?

Microphone Fix! For those who can't seem to get it working with CL Drivers or YouP-

Hi Guys,?I'm currently using the U-Pax mod and it's brilliant, thanks so much for sharing this neat bunch of software. By the way, many of you might have encountered their mics not working with the Creative X-Fi drivers (and consequently also not on?U-Pax drivers)?on Vista and I found a neat way to get it working - very quickly too. All you have to do it simply disable the mic in the sound settings, then enable it again. Voila! The microphone picks up sound. I have the detailed instructions below:?Control Panel --> Sound --> Click the Recording Tab --> Right Button Click the Microphone --> Click Disable --> Right button click again ---> Ensure "Showed Disabled Devices is ticked ---> Right button click "Microphone" ---> Click "Enable"?This should do the trick! Let me know if any of you have problems with this. -MoT|oN FX

Well, the microphone is working now truly, but only theoretically. Practically it'ss unbearably quiet (even if you enable +20 db boost and level is 00). The same mic with simple Realtek HDA embedded in my motherboard works fine. (I?m using X-Fi Fidelty Pro on Vista Ultimate)

I upgraded to OS8 for my Iphone 5 and now I have no access to e-mail and several apps. How can I address this problem? For those who have an iphone 5 I recommend not upgrading to the new OS until these bugs are resolved.

I upgraded to OS8 for my Iphone 5 and now I have no access to e-mail and several apps. How can I address this problem? For those who have an iphone 5 I recommend not upgrading to the new OS until these bugs are resolved.

I foolishly downloaded OS8 on my iPhone 4S. It not only greyed out my wifi button making it impossiblr to use wifi, but bluetooth connection doesn't work either. I reset the phone to factory settings but that did nothing apart from loose all my photos and contacts. OS 8 was still on after too. Apple say it is a problem but the download only brought the fact the hardware was faulty to the fore, but not being under warranty , the repair would cost £166 that I would have to pay. Totally unacceptable. If the problem was known and they knew it would cause problems on older models, why have it bob up on iTUNES for download.
Don;t download it guys, APPLE aren't admitting culpability and it will cost you a fortune to put right!!

For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
SOLUTION:
Iam pointing t0 windows7 os.
1) go to control panel
2) open hardware and sound
3) In that open Devices and printers
4)In that u can find Apple Iphone.
5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

IPod Info for those who need it

Just thought I'd give some help to those who need it.
- For those who are having trouble with their ipods accepting some videos and not others, try shortening the names of the video files. As long as the video files are in the proper format, this should clear up that issue.
- For those who want to get the songs off of your ipod without having to worry about the iTunes one-way syncing issue the following programs will help you with that:
PodPlus
iPod Agent
- For those who are just curious, here are the size incriments for data:
Bit
Byte
Kilobyte
Megabyte
Gigabyte
Terabyte
Pentabyte
I've got the 5th gen iPod and after a little finessing, I think I've got it all pretty much figured out. So, if anyone has questions, gimme a shout. Or maybe you've got some cool ideas I can use!
5th Gen Windows XP Pro
Windows XP Pro

What is an ideal average setting for my homemade iMovies?
Settings for your iMovie for what? If your are talking about conversion to an iPod compatible format, which format? Are you more concerned with quality or quantity?
First, what's the best, fastest and easiest way to convert these iMovies to the H.264 (is that done through iMovie or QT Pro or both) and what other settings (audio for one) should I be using besides the standard 30 fps ?
Your are using the same QT tools whether you convert directly from iMovie or indirectly via QT Pro using a reference file. (I.e., the only time you save is the time it takes to write the reference file itself.)
Define what you mean by best.
The "Movie to iPod (320x240)" option is the fastest in terms of programming your conversion but the slowest in terms of time it take for processing. The "Movie to MPEG4" option is slower/harder to program for a single pass H.264 encode, but takes half the time to process as the dedicated H.264 option. MPEG4 video options (single pass and 2-pass modes) are faster than H.264 codec. Audio options are the same for both H.264 and MPEG4 formats -- AAC LC. I personally would stick with the 44.1 kbps sampling rate and 128 kbps data rate for audio but you could take it up to 48 kbps at 160 kbps if you want. As to frame rate, I would stick with the current (original) setting of your source. 30 (29.97) fps provides the smoothest flow of motion. You could, of course, try 24 or even 15 fps in some cases to see if it is acceptable. Dropping below 12 fps would probably be unacceptable to most people. But you're the producer and director here, so you have to make up your own mind.

For those who install FinalCut on there MacBook....

i noticed in this forum, but cant seem to find the threads anymore, that some were able to run version of finalcut on the macbooks somehow. im trying to install the hd, 4.5 version, but it says something about an "agp missing" or something. for those who were able to install final cut on their macbooks, is there something im missing or is it not possible? thanks in adavance.

The universal version will be available this month. No version will currently run. You can upgrade to the universal version when it is available:
http://www.apple.com/universal/crossgrade/
Dave

Mac pro cannot boot after upgrade to 10.8.3

My Mac Pro cannot boot after upgrade to 10.8.3. Anything firmware I can reset or how should I do.
I am using a early 2008 Mac Pro

Can you boot into safe mode? http://support.apple.com/kb/ht1455
If not, how about Recovery? http://support.apple.com/kb/ht4718
If you can, run Disk Utlity and repair the disk. You can try rebooting normally, but I would just reinstall after quitting Disk Utility.

Some dvi questions for those who really know there stuff!

Hi all, haven't lurked these forums in a few weeks but just had a quick question for those who wanna build up some "points". I'm trying to connect my MBP 15" (1.83ghz) to my Dell LCD 26" T.V. via DVI. Anyhoo, the DVI port on an MBP is a DVI-I (Dual link 24 + 5 pin) fenmale port while my Dell LCD sports a DVI-D (Dual link 24 + 1 pin) female port. Anyhoo, I went to my local Circuit City store and picked up a 6.6ft DVI-D (Single link 18 + 1 pin) male cable to hook both devices up. Should this work? If those have no idea what I'm talking about, I've included a link with a picture of allt he different DVI ports:
http://upload.wikimedia.org/wikipedia/commons/thumb/5/59/Dvitypes.png/180px-Dvitypes.png
If I haven't explained myself well, please post and I'll do my best to clarify.

Am I missing something? Do you actually have a problem making this work? If the plugs you chose are mechanically compatible (and both are DVI D, dual-link), then there should not be a problem.
Ah. I see the concern. The extra four pins. I believe they make the connector able to supply hybrid DVI-A and DVI-D. The Mac output is hybrid so it can easily be adapted drive a VGA monitor, too.
I think you should be fine.
I have a ViewSonic 1600x1200 LCD monitor with a DVI (single) and it works superbly with the Mac.
RRS

FOR THOSE WHO WISH TO RIP IN DIFFERENT FORMATS WITH Windows Media Playe

I decided to put a little something together for those who want to rip CD's in different formats and sizes.
it's rather easy. If you have Windows Media Player, but not 0, then I suggest you go here and get it.
Anyhow. 4 simple ste
ps.
STEP ONE: (just follow the pictures and red words)
Go to the Tools menu and then click on Options...
<IMG src="http://img49.exs.cx/img49/87/wmp0stephy.png">
STEP TWO:
from there, click on the Tab that says Rip Music
<IMG src="http://img49.exs.cx/img49/5079/wmp0step20ud.jpg">
STEP THREE:
choose which format you want. I would suggest WMA over MP3.
<IMG src="http://img49.exs.cx/img49/3267/wmp0step38hv.jpg">
STEP FOUR:
you're almost finished! Here, select what size of a file you want. Remember, MP3 files will be bigger, for less quality.
<IMG src="http://img49.exs.cx/img49/5739/wmp0step49mp.jpg">
now, press OK, it shouldn't be that hard to find.. LOL. now when you rip music from CD's it'll go into whatever prefrences you chose it to.
Hope that hel
ps.
If you have any questions, email me at [email][email protected]][email protected][/url], catch me on aim (leed2k3), or catch me on MSN Messenger, [email][email protected]][email protected][/url], might be some other name though.

GB only exports to AIFF files, you need to make conversions in iTunes:
http://thehangtime.com/gb/gbfaq2.html#converttomp3

Looking for someone who can Deliver Oracle Application Express training...!

Hi Good day!
By the way, i am looking for someone who can deliver for Oracle Application Express Training.
If you know someone you can refer to me, i would really appreciate.
You can reach me through this email Address: [email protected]
Mobile number is: +639 092 438 249.
This is URGENT!!!!
Thanks!
Ivy

Can you send along info to a private e-mail adddress?? I would be interested in hearing more, my e-mail address is:
tony DOT Miller AT Seattle DOT gov, the dot and at need to be replaced with the proper character..
Thanks!
Tony Miller
Monroe, WA

Important News For Those Who Use Hulu And Other Flash Video Websites.

Adobe will release the next update to the Adobe Flash software in the next few weeks and that update will bring better GPU video decoding acceleration for Windows if you have recent graphics hardware from ATI, Nvidia, or Intel. This update is VERY important for those who use laptops which have less powerful processors and hardware than desktops usually do. In order to take advantage of this update when it comes out, you MUST have the latest graphics cards drivers for your hardware. ATI, Nvidia, and Intel will all be releasing new drivers specifically for the updated Flash software so keep an eye on the respective websites for your graphics hardware maker. Of those companies, only Intel and Nvidia have drivers available for testing at the moment, but ATI is not far behind.

You may be able to disable Flash entirely and just use HTML 5 video codecs to view the videos this is faster but you may lose access to some videos such as ones that have mandatory advertisements.

I have to unistall my adobe cs5 [s/n removed by moderator], and a trial for Photoshop cc and I cannot find the download for those. Can you help me?

I have to unistall my adobe cs5 serial number [], and a trial for Photoshop cc and I cannot find the download for those. Can you help me?

CS5 product downloads are available thru the following page:
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
Photoshop CC trial download is available thru its product page:
Download Photoshop CC by joining Creative Cloud today | Adobe Photoshop CC

For Those Who Can't Boot After Upgrading To 10.5.6

Similar Messages

Maybe you are looking for