For those who cannot browse all titles in a genre using apple tv

spoke to apple support. this option has been removed.
may be added back with next release of itunes. it is not related to apple tv directly as many had 2.4 update before this issue appeared.
case number 13830413
i will in future contact apple support for issues like this.
mine wasn't even under warranty anymore and they were still able to assist.
you will need to go through the troubleshoot wizard on the support website but its worth it.

goofy69 wrote:
I s stated to see all titles from a to z in any genre is gone. you can view up to 200 titles per genre. This results in different genres will vary by letters of films. you can actually see however far 200 goes.
apple is losing out on revenue but does not not care.
hope this clears up any confusion as there are many threads on this issue already.
Hey, your original post said nothing about only being able to view 200 movies, it dosn't even contain the number 200. All you said was the option had been removed which it hasn't, its only crippled at the moment. I agree Apple are the ones losing out because I would just randomly browse and buy films whenever it took my fancy but now unless you know exactly which film you want your stuffed.

Similar Messages

I have two computers connected to my Apple ID which belonged to my partner who recently dieds and bneed the spaces for new computer Cannot dauthorize all because this is already done

I have two computers connected to my Apple ID which belonged to my partner who recently dieds and bneed the spaces for new computer Cannot dauthorize all because this is already done?

Have you tried repairing disk permissions : iTunes download error -45054

Future Music good for those who have not yet learned all

Future Music Magazine, which I get on the magazine rack at my WalMart, has some good stuff in November-December issues for those who need to learn more. I am talking about a two-part article, "The A to Z of digital music". or something like that. A through M is covered in the November issue. N through Z is planned for December. Topics A-Z are explained in a paragraph or more. EQ is covered for example. November also has a tutorial sort of thing on Reverb.
Future Music has not always been so helpful. I did not find much in the October issue akin to what I have mentioned above.
I think these two issues of Future Music will be quite helpful to me and perhaps to others among us also.
LuckyMan

Correction. Various topics, beginning with A through Z, are EACH explained in a paragraph or more. Sometimes there is a little essay on a topic. Good for newbies and sometimes good for non-newbies who must do not know it all yet.
LuckyMan

Some dvi questions for those who really know there stuff!

Hi all, haven't lurked these forums in a few weeks but just had a quick question for those who wanna build up some "points". I'm trying to connect my MBP 15" (1.83ghz) to my Dell LCD 26" T.V. via DVI. Anyhoo, the DVI port on an MBP is a DVI-I (Dual link 24 + 5 pin) fenmale port while my Dell LCD sports a DVI-D (Dual link 24 + 1 pin) female port. Anyhoo, I went to my local Circuit City store and picked up a 6.6ft DVI-D (Single link 18 + 1 pin) male cable to hook both devices up. Should this work? If those have no idea what I'm talking about, I've included a link with a picture of allt he different DVI ports:
http://upload.wikimedia.org/wikipedia/commons/thumb/5/59/Dvitypes.png/180px-Dvitypes.png
If I haven't explained myself well, please post and I'll do my best to clarify.

Am I missing something? Do you actually have a problem making this work? If the plugs you chose are mechanically compatible (and both are DVI D, dual-link), then there should not be a problem.
Ah. I see the concern. The extra four pins. I believe they make the connector able to supply hybrid DVI-A and DVI-D. The Mac output is hybrid so it can easily be adapted drive a VGA monitor, too.
I think you should be fine.
I have a ViewSonic 1600x1200 LCD monitor with a DVI (single) and it works superbly with the Mac.
RRS

For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
SOLUTION:
Iam pointing t0 windows7 os.
1) go to control panel
2) open hardware and sound
3) In that open Devices and printers
4)In that u can find Apple Iphone.
5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

Important News For Those Who Use Hulu And Other Flash Video Websites.

Adobe will release the next update to the Adobe Flash software in the next few weeks and that update will bring better GPU video decoding acceleration for Windows if you have recent graphics hardware from ATI, Nvidia, or Intel. This update is VERY important for those who use laptops which have less powerful processors and hardware than desktops usually do. In order to take advantage of this update when it comes out, you MUST have the latest graphics cards drivers for your hardware. ATI, Nvidia, and Intel will all be releasing new drivers specifically for the updated Flash software so keep an eye on the respective websites for your graphics hardware maker. Of those companies, only Intel and Nvidia have drivers available for testing at the moment, but ATI is not far behind.

You may be able to disable Flash entirely and just use HTML 5 video codecs to view the videos this is faster but you may lose access to some videos such as ones that have mandatory advertisements.

IPod Info for those who need it

Just thought I'd give some help to those who need it.
- For those who are having trouble with their ipods accepting some videos and not others, try shortening the names of the video files. As long as the video files are in the proper format, this should clear up that issue.
- For those who want to get the songs off of your ipod without having to worry about the iTunes one-way syncing issue the following programs will help you with that:
PodPlus
iPod Agent
- For those who are just curious, here are the size incriments for data:
Bit
Byte
Kilobyte
Megabyte
Gigabyte
Terabyte
Pentabyte
I've got the 5th gen iPod and after a little finessing, I think I've got it all pretty much figured out. So, if anyone has questions, gimme a shout. Or maybe you've got some cool ideas I can use!
5th Gen Windows XP Pro
Windows XP Pro

What is an ideal average setting for my homemade iMovies?
Settings for your iMovie for what? If your are talking about conversion to an iPod compatible format, which format? Are you more concerned with quality or quantity?
First, what's the best, fastest and easiest way to convert these iMovies to the H.264 (is that done through iMovie or QT Pro or both) and what other settings (audio for one) should I be using besides the standard 30 fps ?
Your are using the same QT tools whether you convert directly from iMovie or indirectly via QT Pro using a reference file. (I.e., the only time you save is the time it takes to write the reference file itself.)
Define what you mean by best.
The "Movie to iPod (320x240)" option is the fastest in terms of programming your conversion but the slowest in terms of time it take for processing. The "Movie to MPEG4" option is slower/harder to program for a single pass H.264 encode, but takes half the time to process as the dedicated H.264 option. MPEG4 video options (single pass and 2-pass modes) are faster than H.264 codec. Audio options are the same for both H.264 and MPEG4 formats -- AAC LC. I personally would stick with the 44.1 kbps sampling rate and 128 kbps data rate for audio but you could take it up to 48 kbps at 160 kbps if you want. As to frame rate, I would stick with the current (original) setting of your source. 30 (29.97) fps provides the smoothest flow of motion. You could, of course, try 24 or even 15 fps in some cases to see if it is acceptable. Dropping below 12 fps would probably be unacceptable to most people. But you're the producer and director here, so you have to make up your own mind.

I upgraded to OS8 for my Iphone 5 and now I have no access to e-mail and several apps. How can I address this problem? For those who have an iphone 5 I recommend not upgrading to the new OS until these bugs are resolved.

I upgraded to OS8 for my Iphone 5 and now I have no access to e-mail and several apps. How can I address this problem? For those who have an iphone 5 I recommend not upgrading to the new OS until these bugs are resolved.

I foolishly downloaded OS8 on my iPhone 4S. It not only greyed out my wifi button making it impossiblr to use wifi, but bluetooth connection doesn't work either. I reset the phone to factory settings but that did nothing apart from loose all my photos and contacts. OS 8 was still on after too. Apple say it is a problem but the download only brought the fact the hardware was faulty to the fore, but not being under warranty , the repair would cost £166 that I would have to pay. Totally unacceptable. If the problem was known and they knew it would cause problems on older models, why have it bob up on iTUNES for download.
Don;t download it guys, APPLE aren't admitting culpability and it will cost you a fortune to put right!!

FOR THOSE WHO WISH TO RIP IN DIFFERENT FORMATS WITH Windows Media Playe

I decided to put a little something together for those who want to rip CD's in different formats and sizes.
it's rather easy. If you have Windows Media Player, but not 0, then I suggest you go here and get it.
Anyhow. 4 simple ste
ps.
STEP ONE: (just follow the pictures and red words)
Go to the Tools menu and then click on Options...
<IMG src="http://img49.exs.cx/img49/87/wmp0stephy.png">
STEP TWO:
from there, click on the Tab that says Rip Music
<IMG src="http://img49.exs.cx/img49/5079/wmp0step20ud.jpg">
STEP THREE:
choose which format you want. I would suggest WMA over MP3.
<IMG src="http://img49.exs.cx/img49/3267/wmp0step38hv.jpg">
STEP FOUR:
you're almost finished! Here, select what size of a file you want. Remember, MP3 files will be bigger, for less quality.
<IMG src="http://img49.exs.cx/img49/5739/wmp0step49mp.jpg">
now, press OK, it shouldn't be that hard to find.. LOL. now when you rip music from CD's it'll go into whatever prefrences you chose it to.
Hope that hel
ps.
If you have any questions, email me at [email][email protected]][email protected][/url], catch me on aim (leed2k3), or catch me on MSN Messenger, [email][email protected]][email protected][/url], might be some other name though.

GB only exports to AIFF files, you need to make conversions in iTunes:
http://thehangtime.com/gb/gbfaq2.html#converttomp3

For Those Who Can't Boot After Upgrading To 10.5.6

For Those Who Can't Boot After Upgrading To 10.5.6
(and i am one of those)
how is Apple supposed to make them able to install future fixes and updates
once they finally acknowledge and address this horrible bug?
will they send free bootable CDs with the updates to 10.5.6?

What "Boot ROM version" do you have (check in the system profiler under "Hardware")? If it's not MBP31.0070.B07 or MBP21.00A5.B08, then you will need to update your MacBook Pro's firmware. To do this, you might need to connect an external display and mouse/keyboard, and then run the computer with the lid closed to bypass the laptop's monitor. Then apply the firmware patch and reboot the system. This might also be doable via "Screen Sharing" if you have that enabled and have another mac handy.
The firmware update is here: http://www.apple.com/downloads/macosx/apple/firmware_hardware/macbookproefifirmw areupdate151.html
Message was edited by: Topher Kessler

For those who install FinalCut on there MacBook....

i noticed in this forum, but cant seem to find the threads anymore, that some were able to run version of finalcut on the macbooks somehow. im trying to install the hd, 4.5 version, but it says something about an "agp missing" or something. for those who were able to install final cut on their macbooks, is there something im missing or is it not possible? thanks in adavance.

The universal version will be available this month. No version will currently run. You can upgrade to the universal version when it is available:
http://www.apple.com/universal/crossgrade/
Dave

In iOS 7, cannot shuffle all songs in a genre?

In iOS 7, cannot shuffle all songs in a genre. How can I do this as I have previously done in ealier versions of iOS?

The solution is rather simple; just tell Siri to shuffle the desired genre.

So can I use our local internet provider for the e-mail account, or do I have to use Apple?

So can I use our local internet provider for the e-mail account, or do I have to use Apple?

Yes, you can use the Mail app on the iPod for your internet mail provider. Go to your provider's mail support website to find out how to set up the account on the iPod. They probably will not have instructions for an iPod but the one for the iPhone should do.

Question for those who've upgraded re: QuickTime interaction

For some of you who've upgraded (and those of you who haven't), I have a video that used to loop when using the older version of QuickTime, but doesn't loop for me using the newest version. I know some things changed in QuickTime for security, but I was unaware that it would affect this action.
I apologize in advance for the addictive nature of the song
http://web.mac.com/makentosh/iWeb/zample/crab.html
This video uses eZedia QTI to embed the "looping" in the streamed movie. Using this setup, a user would not have to edit the .js file of the site as the Autoplay="false" didn't apply in this case. What I wonder now is if it still works for users with the old un-upgraded QuickTime but doesn't work for the newer people. Just trying to determine if this is a true change for all users or if there's something particular about my setup.

It's caused by the missing QuickTime controller.
You'll notice that Loop is grayed out in your current file during playback and even adjusting the Movie Properties to add a controller version 7 does not allow your file to loop.
But 6.5.2 does work to allow "looping" if you add a controller. Of course I can't interact with your reference movie but the menu items for loop did activate.
Version 7.1.5 has some "hidden" features (I suspect related to TV) that actually use a different controller feature for chapter tracks and move them out of the controller and into a Menu item. Maybe sub titles?
Maybe it's time for your crab song to only play once?
Others have complained that 7.1.3 no longer allows Loop (from the Menu) to be saved with the file. I haven't fully tested that one.

A Few Quick Tips For Those Who Are New To Fios Quantum and the New Quantum Update

Most of those who have quantum received the new update early this morning (8/12/14)
There are a lot of people that are new to fios who never had anything prior to quantum so I thought I'd make this post to help.
Those who had the older boxes prior to quantum should already know about all of this.
The new update now reflects what the older stb/dr's have and have had for awhile now. There are now more menu settings you will want to go through.
The ad banner guide at the bottom can be disabled. Go to menu > Notifications > Guide Banner > set to disable
The banner will still be there, but will show Verizon rather then ads.
The home screen can be turned off. There is an option to turn it off within the home screen or you can go to menu > Notifications > Promotions > set to disable
The led on the boxes have been changed. If you want to change it go to menu > System > Media Server Settings > LED Brightness.
The Auto Power Off option is set to 4 hours by default. If you don't want the box to turn off automatically you will want to disable this. Menu > System > Media Server Settings > Auto Power Off > set to none
There is now the option to change the guides banners times outs. Menu > Settings > System > Television > Info Bar Time Out (also Channel Bar Timeout)
Some on other forums mentioned the video formats have been changed so its a good idea to check the option out to see if it reflects what you want. Menu > Settings > Audio & Video > Video Settings > Video Format
The aspect # button now works so any SD channels that are boxed can now be stretched using the # button.
I'm happy to see this option back.
Solved!
Go to Solution.

Thanks for the info regarding the latest update. I like some of the new/improved options, however I am highly disappointed that the update discontinued the reminder option. I would think that setting a program reminder is a highly used feature and many will be unhappy now that it is gone. I know I surely am!

For those who cannot browse all titles in a genre using apple tv

Similar Messages

Maybe you are looking for