For those who GPS not functioning . have got possible solution!

  got 8 gig 3G on Friday . for 2 days tried tried to make it identify location with no luck at all . went around the block etc couldn't get it to work . button on left bottom of the phone was rotating endlessly trying to find location with no luck . i decided to go to o2 store to complain and guess what right before the store i checked ii it was working and wala.. all fine worked as it should right from the start .
o2 is on the oxford st in center of london where you good reception and lots of free WI-FI spots . on top of that i successfully logged in free wi-fi spots . came back to East London and it continues to work flawlessly . i've read people having same problem so try to find a spot in your towns where you can GPS  will function , i suppose one of o2 shops is a good idea to try and see how it might solve GPS disfunctionality issue . sounds strange but it worked .
don't forget to feedback . good luck .

I'm glad that you have it working, but I afraid it is still erratic. Sometimes it finds where I am, on other occasions, in the exact same location, it cannot. I took a picture today and it placed me in the location where I was yesterday. Quite hopeless really.

Similar Messages

For those who did NOT pre-order the Iphone 4

Are you camping out the Apple store?, what time are you heading there?

Unfortunately I have to wait until Tuesday to get mine from AT&T, and if they don't have any by then I will be raising ****! I have to get mine from AT&T because I'm using one line to upgrade but activating on a different line.

Important News For Those Who Use Hulu And Other Flash Video Websites.

Adobe will release the next update to the Adobe Flash software in the next few weeks and that update will bring better GPU video decoding acceleration for Windows if you have recent graphics hardware from ATI, Nvidia, or Intel. This update is VERY important for those who use laptops which have less powerful processors and hardware than desktops usually do. In order to take advantage of this update when it comes out, you MUST have the latest graphics cards drivers for your hardware. ATI, Nvidia, and Intel will all be releasing new drivers specifically for the updated Flash software so keep an eye on the respective websites for your graphics hardware maker. Of those companies, only Intel and Nvidia have drivers available for testing at the moment, but ATI is not far behind.

You may be able to disable Flash entirely and just use HTML 5 video codecs to view the videos this is faster but you may lose access to some videos such as ones that have mandatory advertisements.

I upgraded to OS8 for my Iphone 5 and now I have no access to e-mail and several apps. How can I address this problem? For those who have an iphone 5 I recommend not upgrading to the new OS until these bugs are resolved.

I upgraded to OS8 for my Iphone 5 and now I have no access to e-mail and several apps. How can I address this problem? For those who have an iphone 5 I recommend not upgrading to the new OS until these bugs are resolved.

I foolishly downloaded OS8 on my iPhone 4S. It not only greyed out my wifi button making it impossiblr to use wifi, but bluetooth connection doesn't work either. I reset the phone to factory settings but that did nothing apart from loose all my photos and contacts. OS 8 was still on after too. Apple say it is a problem but the download only brought the fact the hardware was faulty to the fore, but not being under warranty , the repair would cost £166 that I would have to pay. Totally unacceptable. If the problem was known and they knew it would cause problems on older models, why have it bob up on iTUNES for download.
Don;t download it guys, APPLE aren't admitting culpability and it will cost you a fortune to put right!!

Future Music good for those who have not yet learned all

Future Music Magazine, which I get on the magazine rack at my WalMart, has some good stuff in November-December issues for those who need to learn more. I am talking about a two-part article, "The A to Z of digital music". or something like that. A through M is covered in the November issue. N through Z is planned for December. Topics A-Z are explained in a paragraph or more. EQ is covered for example. November also has a tutorial sort of thing on Reverb.
Future Music has not always been so helpful. I did not find much in the October issue akin to what I have mentioned above.
I think these two issues of Future Music will be quite helpful to me and perhaps to others among us also.
LuckyMan

Correction. Various topics, beginning with A through Z, are EACH explained in a paragraph or more. Sometimes there is a little essay on a topic. Good for newbies and sometimes good for non-newbies who must do not know it all yet.
LuckyMan

For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
SOLUTION:
Iam pointing t0 windows7 os.
1) go to control panel
2) open hardware and sound
3) In that open Devices and printers
4)In that u can find Apple Iphone.
5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

Block the processing of payroll for employees who do not have IT0185 ST01

Hi People.
I have a client requirement that payroll should be processed only for those persons for whom ID number (IT0185-ST01) is available. I am trying to do it for Portugal Payroll.
I activated P0185 function in PE04 for Portugal and created 2 rules:
*ZH01 Verifica existência do IT0185*
*TABLEP0185 Ler campos de tabela*
*" VARGBSUBTY Campo tab.VVVVV ArgV*
*" 01*
*NUM=1 Definir*
*ADDWT&0185 VAR tab.variáveis*
and...
*ZH02 Verifica existência do IT0185 Subtipo 01*
*NUM=& 0185 Definir*
*" NUM?0 Comparação*
*ZERO=&0185 Definir VVVV p/zero*
*" =*
*ERROR Cancel.processamento*
And I put the rules in sequence in the scheme. But the function P0185 doesn't accept rules.
How do I block the processing of payroll for employees who do not have infotype 0185 subtype 01?
Thanks,
Helio Rabello

if you are not sure about the linking i suggest to just show all roles associated to all the employees,
group by employee
create true/false formula for the role_ids where ONLY your 20 role is TRUE per employee
then exclude all false - that should give you only the employees that are missing that particular role.

Dropbox: I cannot get video to play and cannot share pictures with those who do not have Dropbox installed.

Dropbox: I cannot get video to play and cannot share pictures or video with those who do not have Dropbox installed.
iMAC
I am running OSX 10.6.8
Processor: 3.06 GHz Intel Core 2 Duo
Memory: 4GB

To share either select the link (paperclip) icon on the right of the file or folder list.
Cut and paste the link into an email you send your friends. Do not use the "share this" option in Dropbox as it forces them to join.
You can test it after deleting your browser cache and cookies - you will no longer be signed in to Dropbox but the link should work fine.
Hope this helps !

TS3276 How do I send an attachment to those who do not have a Mac computer?

How do I send an attachnent to those who do not have a Mac computer? My friends are unable to open my attachments from my MacBook.

What are you trying to send them? Is it from a Mac application like Pages?

IPod Info for those who need it

Just thought I'd give some help to those who need it.
- For those who are having trouble with their ipods accepting some videos and not others, try shortening the names of the video files. As long as the video files are in the proper format, this should clear up that issue.
- For those who want to get the songs off of your ipod without having to worry about the iTunes one-way syncing issue the following programs will help you with that:
PodPlus
iPod Agent
- For those who are just curious, here are the size incriments for data:
Bit
Byte
Kilobyte
Megabyte
Gigabyte
Terabyte
Pentabyte
I've got the 5th gen iPod and after a little finessing, I think I've got it all pretty much figured out. So, if anyone has questions, gimme a shout. Or maybe you've got some cool ideas I can use!
5th Gen Windows XP Pro
Windows XP Pro

What is an ideal average setting for my homemade iMovies?
Settings for your iMovie for what? If your are talking about conversion to an iPod compatible format, which format? Are you more concerned with quality or quantity?
First, what's the best, fastest and easiest way to convert these iMovies to the H.264 (is that done through iMovie or QT Pro or both) and what other settings (audio for one) should I be using besides the standard 30 fps ?
Your are using the same QT tools whether you convert directly from iMovie or indirectly via QT Pro using a reference file. (I.e., the only time you save is the time it takes to write the reference file itself.)
Define what you mean by best.
The "Movie to iPod (320x240)" option is the fastest in terms of programming your conversion but the slowest in terms of time it take for processing. The "Movie to MPEG4" option is slower/harder to program for a single pass H.264 encode, but takes half the time to process as the dedicated H.264 option. MPEG4 video options (single pass and 2-pass modes) are faster than H.264 codec. Audio options are the same for both H.264 and MPEG4 formats -- AAC LC. I personally would stick with the 44.1 kbps sampling rate and 128 kbps data rate for audio but you could take it up to 48 kbps at 160 kbps if you want. As to frame rate, I would stick with the current (original) setting of your source. 30 (29.97) fps provides the smoothest flow of motion. You could, of course, try 24 or even 15 fps in some cases to see if it is acceptable. Dropping below 12 fps would probably be unacceptable to most people. But you're the producer and director here, so you have to make up your own mind.

Some dvi questions for those who really know there stuff!

Hi all, haven't lurked these forums in a few weeks but just had a quick question for those who wanna build up some "points". I'm trying to connect my MBP 15" (1.83ghz) to my Dell LCD 26" T.V. via DVI. Anyhoo, the DVI port on an MBP is a DVI-I (Dual link 24 + 5 pin) fenmale port while my Dell LCD sports a DVI-D (Dual link 24 + 1 pin) female port. Anyhoo, I went to my local Circuit City store and picked up a 6.6ft DVI-D (Single link 18 + 1 pin) male cable to hook both devices up. Should this work? If those have no idea what I'm talking about, I've included a link with a picture of allt he different DVI ports:
http://upload.wikimedia.org/wikipedia/commons/thumb/5/59/Dvitypes.png/180px-Dvitypes.png
If I haven't explained myself well, please post and I'll do my best to clarify.

Am I missing something? Do you actually have a problem making this work? If the plugs you chose are mechanically compatible (and both are DVI D, dual-link), then there should not be a problem.
Ah. I see the concern. The extra four pins. I believe they make the connector able to supply hybrid DVI-A and DVI-D. The Mac output is hybrid so it can easily be adapted drive a VGA monitor, too.
I think you should be fine.
I have a ViewSonic 1600x1200 LCD monitor with a DVI (single) and it works superbly with the Mac.
RRS

FOR THOSE WHO WISH TO RIP IN DIFFERENT FORMATS WITH Windows Media Playe

I decided to put a little something together for those who want to rip CD's in different formats and sizes.
it's rather easy. If you have Windows Media Player, but not 0, then I suggest you go here and get it.
Anyhow. 4 simple ste
ps.
STEP ONE: (just follow the pictures and red words)
Go to the Tools menu and then click on Options...
<IMG src="http://img49.exs.cx/img49/87/wmp0stephy.png">
STEP TWO:
from there, click on the Tab that says Rip Music
<IMG src="http://img49.exs.cx/img49/5079/wmp0step20ud.jpg">
STEP THREE:
choose which format you want. I would suggest WMA over MP3.
<IMG src="http://img49.exs.cx/img49/3267/wmp0step38hv.jpg">
STEP FOUR:
you're almost finished! Here, select what size of a file you want. Remember, MP3 files will be bigger, for less quality.
<IMG src="http://img49.exs.cx/img49/5739/wmp0step49mp.jpg">
now, press OK, it shouldn't be that hard to find.. LOL. now when you rip music from CD's it'll go into whatever prefrences you chose it to.
Hope that hel
ps.
If you have any questions, email me at [email][email protected]][email protected][/url], catch me on aim (leed2k3), or catch me on MSN Messenger, [email][email protected]][email protected][/url], might be some other name though.

GB only exports to AIFF files, you need to make conversions in iTunes:
http://thehangtime.com/gb/gbfaq2.html#converttomp3

For Those Who Can't Boot After Upgrading To 10.5.6

For Those Who Can't Boot After Upgrading To 10.5.6
(and i am one of those)
how is Apple supposed to make them able to install future fixes and updates
once they finally acknowledge and address this horrible bug?
will they send free bootable CDs with the updates to 10.5.6?

What "Boot ROM version" do you have (check in the system profiler under "Hardware")? If it's not MBP31.0070.B07 or MBP21.00A5.B08, then you will need to update your MacBook Pro's firmware. To do this, you might need to connect an external display and mouse/keyboard, and then run the computer with the lid closed to bypass the laptop's monitor. Then apply the firmware patch and reboot the system. This might also be doable via "Screen Sharing" if you have that enabled and have another mac handy.
The firmware update is here: http://www.apple.com/downloads/macosx/apple/firmware_hardware/macbookproefifirmw areupdate151.html
Message was edited by: Topher Kessler

Keypad not functional, have tried everything.

Hi, I have recently come into a serious problem with my Verizon BlackBerry Curve 8300, and a lot of people seem to share this problem: The keypad is not working at all. I can scroll the trackball across the different menu items, but I can't press the trackball, nor any of the buttons on the keypad- even the red and green call buttons.
It all started a few days ago when my Curve was working normally. It had worked fine early that morning, and then I had proceeded to keep it in my pocket during the later morning hours, just as I did every day before that. However, when I took it out to check my messages, I encountered the issue described above. This has actually happened to me before on some occasions, but those were few and far between. A simple battery pull would usually solve the problem.
As the day went on, though, I did numerous battery pulls and the keys still would not work, no matter what I did. I researched this problem and found that it could be a sign of wetness. But I was certain that my Curve has never gotten wet, and I was able to prove this by checking the moisture stickers on the battery and the device. Both did not indicate that the device had gotten wet- the battery sticker was still white with a red strip, and the device sticker was still a white square. Even so, I still tried all of the solutions given on the other forums, including putting the phone in the oven, freezer, and in dry rice. None of those worked, so it's clear that this is not an issue of wetness.
I then moved on to the more daring solution of physically taking apart the phone and cleaning the keys with isopropyl alcohol. I made sure the cleaning was absolutely thorough; I cleaned the keyboard membrane, the trackball and its membrane, the keys themselves, the silver front plate, and even the protective case that housed the phone. There was no corrosion, but there were tons of dust, dirt, and lint covering all these parts, so I figured that that MUST be the problem. I put my phone back together and turned it on, though, and the keypad STILL would not respond.
The final thing that I did was back up the phone, reinstall the OS (version 4.5), and reboot the entire phone. That didn't work either, so it couldn't be a software issue.
Later in the day, though, I did one last battery pull just because, and then I started randomly mashing the keyboard. Lo and behold, the phone WORKED. I was so dumbfounded that this is what caused it to work again; I couldn't believe it, and thought it was too good to be true. Turns out, it was.
For most of the day, the phone worked fine, but one of two things would happen:
1. The keyboard would lock up completely like before while doing simple tasks, and I would mash the keyboard until it would work again.
2. The phone would freeze completely and I would have to do another battery pull.
#2 recently happened again a few hours ago, but this time on the battery pull, the keyboard would not function again, even after mashing it numerous times. So now, I am literally back to square one and left with nothing to do. I still have NO idea what is causing this problem or whether it is a software or hardware issue. My phone had gone from working perfectly one day to being completely unusable the next. Now it seems like it's doing whatever it can to make sure it doesn't work.
By now, most people would probably say that the only solution would be to replace the phone. However...I can't. My phone never had a warranty to begin with, and I won't be able to get the phone replaced unless I pay a huge sum of money, as our local Verizon stores don't carry this model anymore. I am most likely stuck with this phone until our 2-year contract expires in about 4 months. Until then, I am in need of a way to salvage the phone and make it last those final 4 months.
If you have ANY possible solutions to this doozy of a problem, it would be greatly appreciated. I hope that RIM acknowledges the many people that have this kind of problem and fixes it soon, because a cell phone should NOT have these kinds of problems, especially in emergency situations when we need them most.

I notice from your system specs that you're running a very old version of Flash. Could you try updating to the latest one which is 10.2.159.1 It also contains a patch to fix a recently discovered [http://www.h-online.com/security/news/item/Adobe-releases-security-update-for-Flash-Player-1228930.html Zero Day exploit]. You can get it from here: http://get.adobe.com/flashplayer/
Have you experienced any unusual events watching Flash videos lately? It's possible that you may have been a victim of just such an attack. It might be worth doing a malware scan using this well-known scanner from http://www.malwarebytes.org/ The free version is more than adequate to eliminate any current threats.

Display XML Idoc for people who do not understand XML

Hi,
does anybody know an easy way to make an Idoc XML readable for people who do not have any knowledge about XML?
This request comes from our sales department. We store incoming ORDERS.ORDERS05 Idocs from customers in XML format on a file server before mapping and sending them into an R/3 system to create the sales orders. For some reason, the sales people in our company sometimes have to have a look at the original incoming file.
Our intension is to give them an easy tool to open the Idoc XML and get it displayed in a more or less clearly arranged way, maybe as HTML table or something similar. Unfortunately I am not too familiar with XSLT.
Any ideas?
Thanks,
Philipp

Hi Philipp,
you need to do some kind of transformation. XSLT would be my first idea, but if you are not familiar with it, it might be worth a try to have a look at graphical report generators. They will take the hassle of doing manual coding from you.
Or there are XSLT mapping tools available which allow you to transform from XML to HTML, doing basically the same thing.
I do not know if I am allowed to supply some product names here, but I guess a google query for "report generator" or "xslt mapping tool" will yield some results.
Cheers!
Stefan

For those who GPS not functioning . have got possible solution!

Similar Messages

Maybe you are looking for