For those with Issues with the Recent GB update... what you can do to help fix this...

I had my phone replaced by Verizon because the volume was ringing too low with disregard to the level it was set on... this happened immediately after the update and continued even with factory reset. Verizon sent me another one which is doing the same thing but with more issues which include the picture sending and now my mute button is missing when I receive calls. I am a business and cannot afford to miss a single call... especially as this is our slow time of year. To do your part to help push Samsung to send out a corrective update you need to contact them... I did this and a verizon rep told me to encourage this on these forums... here is the link http://www.samsung.com/us/support/contact# it will get you to their contact page and from there you select email under product support. The more of you that do this, the more they will realize there are several... some serious... issues with this update. Thank you and good luck... to all of us!!

I noticed with my Charge phone that when I get a call the FIRST ring is highly muted (quite soft) and then all rings after that are full volume.
I wish that even the first ring was load (full volume) but I accept the fact that that is how GB 2.3.6 works. Anyone know how to change this?
Ya can't win 'em all.
JerryF

Similar Messages

I have been using facetime on my iphone for a while and after the recent, ios update, I cannot seem to use the facetime. What went wrong?

I have been using facetime on my iphone5 for a while and after the recent IOS update, I cannot seems to use my facetime any longer. what went wrong?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

HT1338 When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

When I connect my Macbook Pro to my Dell DLP projector, either via cable or wirelessly, I just see a dark screen with the mouse and mouse trails only, can any one help?

jpmarkques post is a good start point, after folling his directions, you can try detect displays. Also try different rsolution and refresh rates.
Most of the projectors I have used support a 1024X768 res.
Youcan also try a pram reset if it still does not detect.
Leave theproctor connected and powered up, power down the MBP.
Power back up the MBP and hold the following keys before you hear the start up chime:
Option, command, P,R (no commas) continue to hold these keys till you hear the start up chime 2 times.

I've just discovered that with the newest version of iTunes you can no longer delete apps you don't want. You used to be able to do so by connecting to to desktop computer and delete them. Tech support said you can't delete apps anymore. Not Good!

I've just discovered that with the newest version of iTunes you can no longer delete iPod Touch/iPhone apps you don't want. You used to be able to do so by going onto iTunes on your desktop computer and deleting them. Not Good! I just called tech support and they said that in this version there is no way to delete them. They also said there have been numerous complaints about this. You can't even delete them from your applications folder. It's as though you're being held hostage to apps you tried, but do not want.
While we're on the subject, I don't like the fact the the iPod touch comes with unistalable apps such as: Passbook, Nike & iPod, Newsstand, and Game Center. Don't want them, will never use them. Give customers the option to delete apps that we don't want. Call Apple's corporate customer care. escalation, and complain untill they fix this.

Actually,
Step 1:
Step 2.
Step 3.
Step 4.
Step 5.
One of us must be wrong.

When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

HT5047 Having problem with the iOS7 verifying update what should I do?

Having problem with the iOS7 verifying update what should I do?

Several other users have reported this same problem. Unplug the charger and then replug. It should resume to 100%.
 Cheers, Tom

My screen turns gray stays with the ball going around what I can do to boot right?

my screen turns gray stays with the ball going around what I can do to boot right?

Hello,
Which version of the PowerBook do you own?
Which version of Mac OS X do you ave installed?
Here is a guide to gray screens and some steps you can take to help you get our PowerBook to boot into Mac OS X
http://support.apple.com/kb/ts2570

Hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

hey guys. my macbook air wont get past the screen with the apple on it during start up. how do i fix this? i have a paper saved on my laptop on need to get at it. thanks guy!

Your boot drive is damaged in some way. If you have an original installation disc, you can boot from that and run Disk Utility. From DU you can select your internal hard drive ("Macintosh HD" is the name Apple puts on it - you may have renamed yours) and select "Verify Disk". If errors come up, try "Repair Disk". If it repairs, then you should be able to restart and boot from it. If it doesn't show up or won't repair, your drive is probably hosed.
Clinton

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

Security Update 2012-001 Bricks Rosetta programs
I've outlined the restore proceedure here, it covers a lot of bases and explains what is going to occur so please don't be intimidated it's a LOT easier that it appears.
Take your time and comprehend the steps involved and you'll be backup up like before in short order.
Restore method.
#1 Backup your personal data off the machine.
If you get a gray screen or some other hangup upon booting, try holding the Shift key down while booting to enter Safe Mode.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Try Restoring from a TimeMachine or hold option bootable clone
If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from before the Security Update occured.
Obviously if you didn't make a recent backup before the update, your going to have to skip to Step #3.
Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
If you don't know how to restore from TM drive
http://pondini.org/OSX/Home.html
#3 Reinstall OS X 10.6 from disk
If no recent TM or bootable clone then:
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk and Permissions of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
Note: If Disk Uitlity can't repair the drive, then come back to seek further assistance and make sure you have a copy of your data off the machine.
#4 Update to 10.6.8 without Security Update 2012-001
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#5 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
Note: For most users likley Step #3 and #4 is likley all that is needed to be done.
That's it really.
Further Reading:
Learn how to have a OS X drive restore ability using TimeMachine or cloning software
Learn how to clone your entire OS X boot here
http://www.bombich.com/get_ready_for_lion.html
TimeMachine help here
http://pondini.org/OSX/Home.html
Make copies of your original Snow Leopard
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Learn how to make a bootable SL USB thumb drive
http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
Deciding on upgrading to Lion?
Learn which programs ARE NOT compatible/updated for Lion, Rosetta programs will not run on Lion.
http://roaringapps.com/apps:table
Unverified hacks
Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
If at any time you feel this is beyond your capability, please seek local Mac/PC professional assistance before you lose your data.
In fact my steps above are very simple, you might want to have a family member or friend perfrom the proceedure in about a hour or two.
If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
If your a bit more skilled, a option bootable clone is much superior than TM drive.
Good Luck

I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.

I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.

csdwarf,
So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
BrianP_VZW
Follow Us on Twitter @VZWSupport

I have a macbook pro from 2007 and the display memory slows do the screen so much it is almost unuseable Any help fixing this problem?

I have a macbook pro from 2007 and the display memory slows do the screen so much it is almost unuseable Any help fixing this problem?

Hi,
Have you tried
1.leaving the screen flipped open,
2.connecting power
3. connecting external monitor; waiting for it to 'wake up';
then 4. closing lid of MBP to activate clamshell mode?

I'm trying to update an app on my iPod touch but it says that it's unable to download the application at this time. I've tried everything what else can I do to fix this problem??

I'm trying to update an app on my iPod touch but it says that it's unable to download the application at this time. I've tried everything what else can I do to fix this problem??

Try going to Settings>Store and sign out and sign back in.
It also could be due to an Apple server problem. and yu will just have to wait and try again.

How do I monitor my child's history. He claims it was deleted with the recent new update from Apple. Is this true?

How do I monitor my child's history on the iPad? He claims the history became deleted with the new Apple update. Is this true?

However, after the update on 4 devices in my home, not one of them lost their website history. Not one device, so it would not be a common issue for the update to delete ones internet history. So to the OP.......I would be a bit skeptical about your son's claim the update removed his internet browsing history.

Can't play my library: "This computer is already associated with an Apple ID...you can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 88 days." Got a fix?

Since my daughter burned a CD from my computer using our shared libraries I cannot play my library. This pops up: "This computer is already associated with an Apple ID. You can download past purchases on this computer with just one Apple ID every 90 days. You cannot associate this computer with a different Apple ID for 88 days." I can get as far as viewing my library but listening is denied by this pop-up. Can anyone help, please? I just noticed my (this) computer is not showing as registered to my account. Hmmm....a clue perhaps?

Do you have a question?

Issue with iTunes view for podcasts with the latest iOS update (for my Macbook Air, Sept 21, 2013)

I just got the latest update for iOS for my Macbook Air - and now all of my previously deleted podcast episodes are showing up as available for download from the cloud - which is clogging up my iTunes display. How can I get these previously downloaded, listened to, and deleted episodes off of my podcast view/list?

"Not only did it download a new version of itunes, but it also downloaded MS Word updates, and other software that required updating."
MS Word is not an Apple product so it could not've downloaded with all the Apple software updates.
"I clicked File > Check for Updates"
What program were you running to do that?
In any case boot from your OS installer disk and run Repair Disk from Disk Uility.

For those with Issues with the Recent GB update... what you can do to help fix this...

Similar Messages

Maybe you are looking for