For UCCE 7.0, what are the default queue limit
Hi, I am fairly new to this product, I am wondering if there is any doc indicated the default queue limit settings, I couldn't find in the script that the set value node, so I guess it must be running using the default value. please advise, thanks
It is common for those coming from a TDM PBX background (say Avaya) to ask how big the queue is. Since on those platorms one can set a limit on the number of calls one can put into the ACDQ.
Once full, other callers will get a busy signal. On extremely busy call centers, this seems like a reasonable way to block calls when under heavy load.
ICM (UCCE) doesn't have a fixed limit like this, and the Call Router can keep queuing calls. There probably is a software limit, and it may be set in the Router registry. I don't know what it is.
To try to avoid putting callers into a "queue" when the number already queued is very high, you could check this in the Script before the "Queue To Skill Group" node - if this is what you need to do.
Regards,
Geoff
Similar Messages
-
What are the default parameters for PER_EVENTS api
Dear Experts,
Can you tell us what are the default parameters for PER_EVENTS API.Here below I have pasted the API.
procedure create_event
(p_validate in BOOLEAN default FALSE
,p_date_start in DATE
,p_type in VARCHAR2
,p_business_group_id in NUMBER default NULL -- HR/TCA merge
,p_location_id in NUMBER default NULL
,p_internal_contact_person_id in NUMBER default NULL
,p_organization_run_by_id in NUMBER default NULL
,p_assignment_id in NUMBER default NULL
,p_contact_telephone_number in VARCHAR2 default NULL
,p_date_end in DATE default NULL
,p_emp_or_apl in VARCHAR2 default NULL
,p_event_or_interview in VARCHAR2 default NULL
,p_external_contact in VARCHAR2 default NULL
,p_time_end in VARCHAR2 default NULL
,p_time_start in VARCHAR2 default NULL
,p_attribute_category in VARCHAR2 default NULL
,p_attribute1 in VARCHAR2 default NULL
,p_attribute2 in VARCHAR2 default NULL
,p_attribute3 in VARCHAR2 default NULL
,p_attribute4 in VARCHAR2 default NULL
,p_attribute5 in VARCHAR2 default NULL
,p_attribute6 in VARCHAR2 default NULL
,p_attribute7 in VARCHAR2 default NULL
,p_attribute8 in VARCHAR2 default NULL
,p_attribute9 in VARCHAR2 default NULL
,p_attribute10 in VARCHAR2 default NULL
,p_attribute11 in VARCHAR2 default NULL
,p_attribute12 in VARCHAR2 default NULL
,p_attribute13 in VARCHAR2 default NULL
,p_attribute14 in VARCHAR2 default NULL
,p_attribute15 in VARCHAR2 default NULL
,p_attribute16 in VARCHAR2 default NULL
,p_attribute17 in VARCHAR2 default NULL
,p_attribute18 in VARCHAR2 default NULL
,p_attribute19 in VARCHAR2 default NULL
,p_attribute20 in VARCHAR2 default NULL
,p_party_id in NUMBER default NULL -- HR/TCA merge
,p_event_id out nocopy NUMBER
,p_object_version_number out nocopy NUMBER
);From the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. -
What are the default settings for ethernet, shows connected but no internet
What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advanceFrom the menu bar, select
▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. -
What are the default userid and password to logon to Oracle Applications
What are the default userids and passwords to logon to Oracle Applications Manager?
There r no any default password for Application Manager,
However userID is applmgr and if I have to create a password for applmgr I would do that as welcome or welcome1 so the applmgr user can change it when he/she log on first time as needed. -
Is there any commercial support for LCCS services? What are the associated SLAs
Hi,
Following are some queries regarding LCCS.
Is there any commercial support for LCCS services? What are the associated SLAs of the support and the cost?
Can I Using applications developed using LCCS for commercial purpose?
Does Adobe allows its LCCS service customers to offer applications developed using LCCS API for 3rd party commercial usage.
Thanks & Regards
AmitHi,
We were selling LCCS to enterprise customer under a different licensing program, but have since stopped the sale of that.
You should check out this thread - http://forums.adobe.com/message/4110049#4110049 for a discussion on this.
Jeff -
PUBLIC database account on oracle 10g - what are the default privilages?
Hi there,
I was wondering what are the default privileges to PUBLIC database account on oracle 10g R2. Could somebody explain it? Thank you in advance.There is not a user PUBLIC. There cannot be a user PUBLIC. Users and roles share the same name space so if there is a role PUBLIC, there can not be a user PUBLIC.
The catalog table user$ contains both roles and users. The usage is determined by the TYPE# column - 1 = user, 0 = role.
select user#, name, type# from user$ order by 1
sys@esdb01:pncl# /
USER# NAME TYPE#
========== ============================== ==========
0 SYS 1
1 PUBLIC 0
2 CONNECT 0
3 RESOURCE 0
4 DBA 0
5 SYSTEM 1Try it yourself and see.
SQL> create role foo;
Role created.
SQL> create user foo identified by bar;
create user foo identified by bar
ERROR at line 1:
ORA-01920: user name 'FOO' conflicts with another user or role name -
What Are The Default Music Icons On iTunes 10?
What Are The Default Music Icons On iTunes 10?
So far I have:
Alternative
Blues
Classical
Country
Dance
Electronic
Folk
Christian & Gospel
Hip-Hop
Jazz
Latin
Pop
R&B
Reggae
Rock
Vocal
World Fusion
Which ones am I missing?the default apps would vary by region
this is whats in most models below
facebook
hi five
youtube
real player
ovi music
radio
bounce tales
these are whats on most models but they would vary by region and operator
some others would have extra or even less
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
i overcharged my ipad 2 battery for about 3 hours. what are the consequences? and there are these tiny fibers and dust that enters insideipad screen. how will i clean them. .please help
Relax, you cannot "over" charge it. The built in charging protection ensures it will not overcharge the battery or do any damage leaving it plugged in. Many folks (myself included) leave our iPads and iPhones plugged in overnight, all night, so they are charged and read for use the next day.
-
What are the default settings for spaces
What are the system's default settings for SPACES preferences?
Below is a pict with Enable spaces checked so you can see the default popup menus.
-
I tried to adjust font settings to a font that I prefer and a size I can read. It was all kind of messed up so I searched what the default settings should be to start at ground zero again which I found but now it is worse. The main issue is that text is blotchy, dark some places, light another. Monitor is new so it's not issue. What exactly are the Default settings for 7.0.1 I'm not sure mine are correct ??? What other things can I look at if the default doesn't improve everything? I have Windows 7 and turning clear text on or help has no effect. PLEASE HELP ???
You can see the defaults in a screenshot in this KB article:
* https://support.mozilla.com/kb/Some+text+shows+up+bold+after+upgrade
You can check the font setting in: Tools > Options > Content : Fonts & Colors > Advanced
Default Font: Times New Roman (16)
Fonts for : Western
Proportional: Serif (16)
Serif : Times New Roman
Sans-serif : Arial
Monospace : Courier New (13)
[X] "Allow pages to choose their own fonts, instead of my selections above"
Are there any problems reported in the Graphics section at the bottom of the Help > Troubleshooting Information page?
If you have an ATI graphics display try to disable "Morphological Filtering" in the Catalyst display driver:
* Catalyst Control Center > 3D Settings > Disable Morphological Filtering
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver. -
Can I begin prepaid service with a $100.00 card good for one year and if so what are the usage terms?
Yes; phone is for Verizon PREPAID plans. Sri I did not state that correctly. I see that there are prepaid plans with monthly usage etc. I see some offers on line for a $100.00 card that's good for one year. Trying to determine if that is available from a Verizon store to begin a new plan. Checked with two different Verizon stores and got two opposite answers and neither was sure of the terms. Simply trying to get a low cost backup. Thank you for responding.
-
What are the default values for "default if unwired"?
How do you know what the default value for an object will be...if using a "use default if unwired" with an event case?
Is there a listing somewhere of what default values will be?
Thank you,
cayennetst wrote:
Personally, I would highly recommend disabling this on every single tunnel coming out of an event structure (with the possible exception of the tunnel going to the loop's stop terminal). If you use this option, you are almost guaranteed to forget to wire a required value into a tunnel at some point in the future when you add a new case.
More generally, I think that this option should not be the default for these tunnels. You can see more about this here and I would suggest voting it up if you agree with it - http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Output-tunnels-from-event-structure-should-default-to-...
VERY much agreed! Disabling the "default if unwired" option makes absolutely certain that you have considered the correct value for every case.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all. -
What are the default permissions for "self-signed" applets?
Hello!
I have a self-signed applet (=signed with a self made certificate) and under most plugin-enviroments java asks the user if it accepts this certificate as trustworth.
On my linux-box I do not have any problems to write files to the local filesystem after I accepted this self-signed applet.
However I've often read that users must grant some permissions even for signed applets, so is there a list of permissions that are denied by default?
Are there differences between java releases starting with 1.2.2?
Thanks in advance, lg ClemensDefault settings are like you said, jre asks the user and everything will work.
Unless.your applet uses classes that are not signed like with calls from javascript to your applet the plugin.jar is used and you'll get an exception when writing to files.
When writing to files the OS might not allowe the user to write to a certain file or folder.
Don't know what type of exception will be thrown if the OS doesn't allowe it but it has
nothing to do with applet permissions.
To change the default setting you can add the following line in the grant { bit of the
java.policy
permission java.lang.RuntimePermission "usePolicy";
When this line is there all signatures will be ignored and an applet can only do extra
things (like access to local files) if a policy is set up for this applet.
To find out what's wrong at your clients site you should ask them to send a full trace
and check that. I hope you did a .printStacktrace() on the exception in your code so
you can see if any other classes are involved when the exception is thrown.
To turn the full trace on (windows) you can start the java console, to be found here:
C:\Program Files\Java\j2re1.4...\bin\jpicpl32.exe
In the advanced tab you can fill in something for runtime parameters fill in this:
-Djavaplugin.trace=true -Djavaplugin.trace.option=basic|net|security|ext|liveconnect
if you cannot start the java console check here:
C:\Documents and Settings\userName\Application Data\Sun\Java\Deployment\deployment.properties
I think for linux this is somewhere in youruserdir/java (hidden directory)
add or change the following line:
javaplugin.jre.params=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
for 1.5:
deployment.javapi.jre.1.5.0.args=-Djavaplugin.trace\=true -Djavaplugin.trace.option\=basic|net|security|ext|liveconnect
The trace is here:
C:\Documents and Settings\your user\Application Data\Sun\Java\Deployment\log\plugin...log
I think for linux this is somewhere in youruserdir/java (hidden directory) -
What are the default values for the NetStream.multicast***** properties
I read the api document about NetStream.multicast**** properties, but found no default values were given. Will the default values be changed when FP10.1 release?? Or, the values are always changing at runtime?
I have a web-tv application, it broadcast some live videos created by my friends, I think that the latency and lag-time can be bigger in my app, I want to know the recommended default values for the multicast*** properties.
I think the multicastWindowDuration and liveDelay are the keys. And I am confused between NetStreammulticastWindowDuration and NetStream.bufferTime..they like the same...
Sorry for my poor english, Thanks.the publisher can set the multicast properties you listed to be the defaults for all of the subscribers of the stream. in addition, the publisher can select whether or not "push" mode is used by changing NetStream.multicastPushNeighborLimit. setting the limit to 0 disables push, setting it to non-zero enables push in the mesh, but only changes the actual push neighbor limit for the publisher. if push is enabled for the stream, each peer will use push mode, but will start out with the global default limit (which is currently 4). this is for safety. we recommend you always leave push enabled.
each peer (including the publisher) can change the multicast stream parameters dynamically. changes are local to that peer.
for the publisher to set the initial parameters for the stream that all peers will inherit as the default, the parameters must be changed on a new NetStream *before* NetStream.publish() is called. example:
var ns:NetStream = new NetStream(netConnection, groupSpecification);
ns.multicastWindowDuration = 10; // change default for everybody
ns.publish("mystream");
ns.multicastWindowDuration = 15; // change window duration just for publisher, everybody else will start with 10 for this stream
each subscriber can override the multicast stream properties locally, but the overrides must be set on the NetStream *after* receiving a NetStream.MulticastStream.Reset NetStatusEvent.NET_STATUS event in order for the override to stick. overrides must be reapplied each time the NetStream.MulticastStream.Reset event is received. -
What are the default skin selectors applied for af:commandButton,
Hi Experts,
Please let me know where i can get the default skin applying for ADF Faces Core Components like af:commandButton, af:selectOneChoice, af:outputText etc..
Please let me know where i can get detailed skin selectors for ADF Faces Core Components in 10g, As per this link, [http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/skin-selectors.html#Component-level Selectors] only some of the components has selectors, but for others there are no specific selectors..
Regards,
R N V Prasad.Hi Folks
Can anyone reply or suggest some ideas on how to get or modify the skins of core components like af:commandButton, af:outputText, af:selectOneChoice etc...
regards,
R N V Prasad.
Maybe you are looking for
-
Hello Experts, I am struggling with a problem. In my development I have two db tables for eg. Table A and Table B. Now table A has about 200,000 entries and table B has about 800,000 entries. I want to delete all the extra entries (junk entries-not
-
Java execution failed. Please check the Java Option in the option dialog.
I recently installed BI Publisher MS Word Add-In. After installing I get the error "Java execution failed. Please check the Java Option in the option dialog" when trying to preview a template in (pdf, word, excel...). I tried changing a java paramete
-
What to do when you are finished with a project
I just purchased adobe photoshop elements 11 and edited my first photo and now i am finished with it. How do i get that photo to re save as a new JPEG file? If i go to mmyu media organizer it says that it is currnetly being edited, but im done and
-
How do i remove the lower icons on the start up page
THE ICONS on the bottom of the start up page are sync, history, download, book marks and addon I want to remove this from the start up, i need to hide them..
-
What is the alternate for flash player for iPad air
Can any body suggest a way out?