For voice to sound like from a telephone

Hi,
I have some voices recorded in .wav and I wanted to include them on my FCE 4 project.
It's supposed to be a telephone conversation, so the voices are in off.
How can I make them sound like they come from an actual telephone?
Thank you.

Salut Michel. Je suis de l'ile Maurice donc je parle aussi francais comme toi mais j'écris tres mal le francais. So I'll carry on in english. I use a JVC GZHD7 "1980x1080" camera (.TOD file), imovie HD, FCE HD 3.5.1, MacBookPro intel core duo, Tiger and like you I have been a Mac user since 1987. I am doing fine importing TOD file (raw) to imovie HD and exporting using H.264 compression but can't import raw to FCE HD. I am looking for a way to avoid conversion through quicktime as its time consuming and quality very poor. You can check my short test on www.vimeo.com/1058890 where I exported using H.264 compression at Bitrate 5000 kbits/sec and downsized to 1280x720. Voila. Can you help please? Merci d'avance. Vino.

Similar Messages

  • How can I turn a recorded voice into multiple voices that sound like a group of singers?

    I'm using Logic Pro 9. Could someone teach me how to turn a single recorded voice into multiple voices that sound like a group singing together
    by mixing or other techniques ? I don't have the luxury of a group singing together with me when I do recording. Advices would be much appreciated!

    By far the most natural way to achieve this is for the singer to perform multiple takes - even if you've only one singer. At it's simplest, you could just double track the vocal part, although I prefer 3 parts - panned centre, left & right. Then repeat this process for each harmony, & mix accordingly.
    Melodyne & some of the above methods do work on am single voice, but phase cancellation can be an issue if your not careful with each part's timing & panning. If you can only get a couple of decent takes from the singer, far better to perform any harmony/pitching techniques on the second take to avoid any phase issues. It's not uncommon for a singer to perform each vocal part 5-10 times, then comp (edit) the best takes so that you end up with 3 decent takes.
    If you've only only one voice to work with Antares Harmony EFX is a useful alternative.
    http://www.antarestech.com/products/harmony_efx.shtml

  • Looking for ringtone that sounds like a landline p...

    Hi,
    I'm looking for ringtone that sounds like a landline phone, in other words no music, movie sounds, etc., just a good quality tone that sounds like a conventional (old fashioned even) telephone ring. Any ideas what site I can get one from?
    Many thanks, etc.
    PS. Handset is a Nokia 6300.

    Have a look at the ones I posted here they are a more traditional kind of ring rather than old fashioned ones though.
    http://www.fonefunshop.co.uk/forum/showthread.php?p=178318#post178318
    HTH.

  • Voice over sounds like coming from a toilet paper tube

    OK, I was born in a poverty stricken area of Pennsylvania, and we used toilet paper tubes for toys.
    More self-disclosure than you wanted, but during an interview, the questions did not come out very clear. I used the voice over tool, and the difference between the sound and the voice over is very noticeable. The voice over sounds "tinny" and distant.
    I copied the sound tracks to make it louder and played with the pan and the volume, but to no avail.
    Any suggestions?
    Hank Kearns

    I am using a Logitech USB mic. Perhaps that is
    my problem to.
    OUCH! this made me wince in sympathy pains. what you need for a decent voiceover - i do this in my edit room - are some sound blankets on the floor, a sennheiser me66 in the mic stand pointing down, above and in front of he talent, going into your mixer and then into your vtr or your mac. personally, i go into my vtr and use tape so i can turn off the computers.
    that usb mic isn't gonna cut it!

  • Imported AIFF voice file sounds like MInnie Mouse on Helium

    Hi there,
    I imported an aiff file originally recorded on a Olympus DM20 voice recorder into GB2. Now it's all speeded up--playing so fast that it sounds like MInnie Mouse on Helium. I also imported it into itunes where it sounds fine.
    Can anyone assist me in getting the file to play at the proper speed?
    thanks!

    Hi, again
    I followed the instruction. Now the speed is fine, but there is no visual representation of the file. All I see is a tiny wedge of yellow about a quarter centimeter wide, then nuthin. It's hard to edit with no visual.
    Got a fix for this, too?

  • Emailed File of Voice-over sounds Like it's Underwater

    Hi,
    My wife just began a voice over career and just got her first gig. She recorded files over GarageBand and emailed them to the client. When we listen to them on her system, they sound great. But after e-mailing, she sounds like she's underwater or muzzled.
    Is there a compression setting that we're missing? Hoping someone has some experience with this.
    Thanks so much.
    P Smith

    A digital audio file shouldn't change just because you emailed it. Could be the other parties computer settings or player. You should ask them what format and settings they want the file in.
    Also instead of emailing files you may want to think about another way of sending audio files. Maybe a ftp server so your clients can download them from the net and files size won't start to become a issue.

  • When a game or survey opens a new window in firefox it makes annoying sounds like from the game,mario brothers.Is there a way to stop this?

    When firefox opens a new window for games or surveys,it makes annoying sounds that sound like mario brothers,Is there a way to stop this?
    == This happened ==
    Not sure how often
    == Just today as far as i know may 21st

    I have the same problem that started about an hour ago. Firefox started sounding like pac man. I uninstalled and reinstalled 3.6.3 to no avail. I guess I use IE until firefox fixes it.

  • Cap loc doesn´t work or light up and when I use shift for cap, it sounds like a typewriter typing

    I have a 2011 model and am running Lion.  My cap lock does not work or light.  When I use he shift to cap a letter, it makes a sound like a typewriter, wierd.  Also when I depress the shift, the symbols on top of the numbers are not as designated.  In order the get the @ sign, I have to depress the option key for it to appear.  The other symbols do not appear correct when I am typing when I depress the shift.  I have to hunt for what key will give me the correct symbol  Very Aggraviating.  I hope I have made myself clear.  I am 70 and not to literate on comps and then an APPLE.  That was my dream and I got but now am having this problem.....  Could anyone please help me.  If you need more info, please let me know as I don´t always make myself clear, so says my husband.

    Go to System Preferences > Keyboard > Modifier Keys. It should look like this:
    If not, press :Restore Defaults".
    With regards to the sound of typewriter, if it's not an actual mechanical sound, by which I mean it's a computer generated sound, you might have installed some application like Typewriter Sound:
    http://www.macupdate.com/app/mac/12077/typewriter-keyboard
    Is that the case? Removing it should solve the problem.

  • Switched to After effects CC today and my imported voice over sounds like buffalo bill ( very low)

    Hi guys,
    Today I switched to after effects cc and I am super excited about it . Unfortunately while trying to sync my audio to animations I found that it was distorted and made my voice sound very deep and low. I read this might have been a problem a while ago but there has patch released that fixes it and I have the most up to date version of after effects cc. What am I missing?

  • My audio for songs all sound like chipmunks...

    I actually know what I did wrong...I just can't get it back. All audio on my computer is sped up. I uninstalled Microsoft Plus! Digital Media Edition, and did not know this would happen. I tried Restoring my computer to earlier dates but it will not do. I ask, how do I get my audio fixed???? Can't seem to fing download (free or $$) for Microsoft Plus anywhere(not offering anymore). Also, do I actually need the software, or can I fix without it??? Anyone who can offer help in this area would be much appreciated!!!!!!
    Jay.

    bump
    all my itunes audio is still sped up. tried downloading DirectX 10, still nothing.....
    Also...my ipod is not affected, it still plays at normal speed when hooked up
    Message was edited by: jaymantheman

  • Winxp sp3 with bootcamp mic's sound like alien!!! in MBP

    when i use the microphone for chat its sound like alien slow down
    can anyone know how to fix it plzzzzzzzzzzzz
    it make me unbelivable in MAC so much worst!!

    Hey, I had a thought, I don't know if it'll work and won't get the chance to find out until later tonight if I'm not too tired or until later tomorrow.
    I think that if the IDT drivers aren't installed in the first place, perhaps the issue can be averted entirely. However, it's going to take a bit of knowledge to do and some patience. The partition will need to be remade entirely so that one may end up with a fresh operating system. When the SL disk is put into the computer, instead of running the full driver setup, pick the drivers directly off the disk by exploring its folders and only install the ones you need. Instead of using the IDT drivers, I believe the SL disk also has Realtek HD audio drivers (if I remember correctly from the last time I looked). My thought is that this manual method can prevent having to deal with the IDT drivers which I believe are part of the issue.
    I understand that reinstalling XP is a process in itself, but this is the only solution I can think of. If manually installing doesnt work, my next move would be to use the drivers that come off the Leopard disk instead of the SL disk.
    Like I said, this is just a thought I have so when I get to it later I'll let you know how it goes unless you decide to give it a try before me.

  • I keep hearing a "salt shaker" sound on my mac.  It sounds like a "shake shake".  What is that all about?

    This weird sound has been going on for a long time on my computer.  It sounds like the "shake shake" of a salt shaker.  Has anyone ever heard of this.  It was on my older Mac and when they transferred the information on to my new computer, it continued to make the sound.  Thanks for your help.

    Sounds like a hardware issue. Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

  • The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive.  I cannot find any place to tell me who to CALL to ask for a replacement!

    Hi Samcat,
    You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
    Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

  • For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

    For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

    For the past month, I've had an echo of my voice while I'm talking on my phone.  It's very annoying and sounds like multiple people are speaking at the same time and it's only me.  Anyone know what's wrong?

  • Make stereo voice sound like analog from 70's movies

    Hi, I have a voice over that is recorded in a high quality, normal voice and I would like to make it sound like a voice from 70's movies. Sort of gritty, analog sound. What should I tweak in Soundtrack Pro?
    Here are the examples of the sound I'd like to achieve:
    http://www.youtube.com/watch?v=_K5IEqmrUio
    or
    http://www.youtube.com/watch?v=nP_7ZopT6oM
    or
    http://www.youtube.com/watch?v=BK10bJ3rSjQ
    Many thanks

    If I only had stock STP effects to use, I would attempt this with a combination of EQ, Compression/Limiting, and a tiny bit of Overdrive or distortion.
    Use the EQ to roll off the high frequencies a bit, experiment with compression to get the right punch, and very subtle Overdrive to try to imitate the tape grit.
    Have fun!

Maybe you are looking for

  • Field of a table is not getting populated correctly in xml file.

    Hi Experts, I have an issue. I transfer a ABAP table as an XML messgae on to application server. BUt the correct format is not comming on Server. Eg: i have a filed in table as /abc/def this field is getting populated on xml messgae as -abc-def How d

  • Im getting exceptional error for website ...what is the problem for that error..error message is posted below

    The initial exception that caused the request to fail, was: com.sap.tc.useragent.UserAgentServiceException: Syntax Error in number '$4' of User-Agent Number Element ID 'engineVersion'. at com.sap.tc.useragent.ElementTypeNumber.createElement(ElementTy

  • Use bindings for a variable in sql

    Hello, I have the following query: select request_number, ktna_notes.request_notes(20, &request_number) from request_table where request_number = &request_number the &request_number is a variable within the database. I need to implement this in my AD

  • ADF and JPA  question

    I tried the example in 'Build a Web Application with JDev 10g Using EJB, JPA and JSF and it worked. This example is based on two tables. Now I have 6 tables. Tables 1,2 and 3 are joined to populate an ADF table form and tables 1,2,4,5 and 6 are joine

  • Crystal Reports Server 2008 - RAS API ReportAppSession.initialize() fail

    Hi, We have a servlet (running on Websphere 6.1 container) trying to connect to Crystal Reports Server 2008 using RAS Java API to open unmanaged reports. It fails at the very beginning of ReportAppSession.initialize() with error message: com.crystald