For WRT1900AC, how do the 4 antennae work with each other?

I am curious how the 4 antennae work with each other. Does a wifi client need to communicate with all 4 antennae? Or just 1 (or 2)? I am curious, as I would like to move 1 or 2 of the antennae via proper cable to expand the coverage area.

bigdave240 wrote:
spec on that cable is 10.8dB per 100 feet. I would think that the router would still have a problem with that. Not sure how long the OP was going to make it but with the beaming technology i would think it would throw it off balance.
My maximum is 60ft when using LMR400 for standard wireless applications. I have done that many many times.
These days they typically integrate the higher gain antenna right into the bridge housing or mount the outdoor bridge right next to the antenna.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

HT5225 I have an imac 24 , imac 27, mac book pro, airbook and Iphone 3G. I have switched to icloud from mobile and all the computers synch with each other but data entered from my iphone in ical won't sync to the other computers.

I have an imac 24 , imac 27, mac book pro, airbook and Iphone 3G. I have switched to icloud from mobile and all the computers synch with each other but data entered from my iphone in ical won't sync to the other computers.
Is there a setting on the iphone that will allow ical entries on the iphone to sink to my other computers
Thank-you

Welcome to the Apple community.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

Untrusted connection message is losing me registrants, clients and business though the SSL works with all other browsers?

I set up a registration form for a client that requires SSL and the untrusted connection message is losing me registrants, my client and business though it works with all other browsers. I don't need the info about how individuals can disable it -- obviously that is not going to make my client satisfied.

Can you post a link?
Did you check that all needed intermediate certificates are send?
* http://www.networking4all.com/en/support/tools/site+check/

How Does the scheduler works with ODI engine

Hi All,
I am new to the ODI and I was going through the documents over the web regarding the scheduling.
Can anyone please let me know how does the Scheduler in ODI is coupled with the ODI engine.
How does the internal scheduler works and how does the external one works. What are the processes the it calls while invoking the scheduler.
Your help will be highly appreciated.
Thanks,
Sumit

Scheduling in ODI is controlled by a special type of ODI agent, strangley called the ODI scheduling agent. This agent is installed as a service and as well as being responsible for all tasks associated with a normal agent is also responsible for managing ODI jobs based on any scheduling information associated with an ODI scenario. All scheduling information is stored in the ODI repository and the scheduler agent reads from this to determine which jobs/scenarios need to be executed and when.

T23 and 512 MB - DIMM - modules don't work with each other, getting only beeps

Hi there,
I searched the whole web, but nowhere getting the answer.
I'm having an Thinkpad T23 2647 with XP.
Actually it works without problems with 2 kind of 256 MB modules.
When I try to change it to one ore more 512MB modules, it comes the known beep-signal for dimm-failure (there is no combination possible, even standalone doesn't work).
I've the newest BIOS (1.20) and Embedded Controller (1.06a) installed.
The dimm-modules are 512 MB SDR PC133 with 144 pins bought via Ebay from CSL Computers in germany.
I had the same problems a year before, but there I thougt it was the DIMM defect.
I need further help please.
Thanks and best wishes

It is possible that the T23 motherboard has a problem with some bad solder connections of the memory module sockets. I have personally have had at least two T23 systems with this problem (out of about 60 that have been in my hands - all purchased quite used from eBay). Your options are to change out the motherboard or to attempt to re-solder the sockets; not that easy to do but it can be possible with a steady eye and good hands (or is that the other way around ).
As a double-check, could you please list the TYPE number from the "System-unit serial number" in the main BIOS setup screen? It's only seven characters long and will start with 2647 or 2648. Don't list anything past the seventh character as that's the system's serial number and that's not needed here. I know that you've listed the 1.20 BIOS, which appears to be the latest for the T23, but I want to make sure that somebody hasn't put a T23 keyboard onto a T22 (or earlier) system. That would be one explanation as to why a 512MB module does not work and what fmyhr may have been thinking about earlier (systems older than the T23 will not work with "high density" modules).
Ray Kawakami
X22;X24;X31;X41;X41T;X60;X60s;X61s;X300;X301;Z60m;Z61t;Z61p;560Z;600E;600X;T21;T22;T23;T41;R50;A21p;A22p;A31 and A31p
Not a Lenovo employee; just a volunteer helping out here
All personal links to PC-Doctor software removed 8/2012 by mfg request

Lightroom and Photoshop don't want to work with each other ...

Hello,
I've a problem with Lightroom 2.4 and Photoshop Cs4 (11.0.1).
When I let Lightroom open a photo in Photoshop to edit it (photo>edit in>Photoshop cs4) it opens it into Photoshop, and I can do wathever I want to the photo. But here's the problem: when I'm ready and click Save, the new Psd-file doesn't comes back into Lightroom... However, Photoshop did save the new Psd-file in the right location with the right file-name, so I have to synchronise the folder and import it back into the catalog. I have Jpegs and DNGs in my catalog, but they both have the problem. The funy part about this is that this happens to almost every photo, so not every photo. I have seen a few photos (about 5 out of 10.000) that do come back in the catalog automatically. I have made a little second catalog to test if it's a problem with the catalog, but the second catalog has the same problem. I already reïnstalled Photoshop, but it didn't help. My operating system is Mac Os X 10.5.8. Camera is 5.4...
Can anyone help me, because it's a real pain in the back to edit my photos in Photoshop right now....
Thanks,
Vincent

Deleting Prefs in both LR and PS sometimes cleans this up.
How to locate Preferences files in LR

How does the texting work with iPod touch?

Want to buy this for my daughter. How do you text when out of your home wifi zone? Can you text anywhere? And how?

What do you mean by a new wifi address? You use the same texting address whenevery yu are connected to a wifi network.
The Messages app that comes with iOS 5 will only text to other devices with iOS 5. There are apps available in the App store like Text+ that alows testing to non-iDevices and iDevces without iOS 5.

How do iPhoto and iTunes work with each other

I am very confused about how iPhoto (which is located in the file structure on my Macair under pictures) interacts with iTunes and Photos on my iPad. The management (including synching and moving photos) is not very intuitive. Anyone care to shoot me a link on where to find a good explanation or try their hand at explain this? Thanks.

Instructions here > iTunes: How to share music between different accounts on a single computer
And here > iPhoto: Sharing libraries among multiple users

IPod, iTunes won't work with each other

I have spent the last 2 days trying to update my "new" nano. The first few times I synced it up no problem. Now that I've spent a small fortune on new music, the nano and iTunes won't work together at all.
First, I have the most up-to-date version of iTunes. Next, I had the software update 1.1.3 for the nano all ready to go when I plugged it in. I hit the install new software button and dear god, if the nano didn't crap out and iTunes lost it and gave me a 1436 error. I had to disconnect the nano and reconnect. I tried several times, but finally gave up on updating the software.
I went on to try to sync the nano and iTunes so I could at least listen to my music at work, but iTunes now says I'm not authorized to play ANY of my purchased music (recently purchased or stuff I've had on there for years) on my computer so it won't copy it onto my nano. So I deauthorize and reauthorize my computer several times, I've read every possible troubleshooting/solution guide I can find on the site and NOTHING works. I can play all my purchased music in iTunes once I've reauthorized my computer, but as soon as I plug my nano in - forget about it - "You are not authorized to play this music on this computer" crap. And I can't even restore the nano b/c I get that stupid 1436 error - and believe me I tried everything those help pages suggest.
I'm at a loss here and not in the least bit happy with this thing.

Problem solved. The harddisk was formatted and Windows and iTunes re-installed. Hopefully this problem won't appear very soon.

How to compare two strings with each other?

Hello,
I have modeled a formular which has a radio group and a button. Furthermore, I have one result state corresponding to each option in the radio group.
In order to determine which result state actually is to be reached I want to attach a condition to each flow to the result states that tests which option has been chosen.
Which operator can I use for writing these conditions? I have tried the "like" operator as well as the "==" operator but neither seems to work.
I have written something like:
=LIKE(@decision, 'option a')
as well as:
=(@decision=='option a')
What am I doing wrong here?
Thank you very much
Alexander

Hi Alexander,
Could this be an Upper/Lower case issue.
I tried the following expression
=(@TXT1=="opt a")
and it worked.
If you want your expression to ignore case you should use this expression:
=(UPPER(@TXT1)==UPPER("opt a"))
In case you're not sure what is the exact string in the field (@decision) you can always use the PROMPT action to display the field's value.
Regards,
Udi

When I load specific websites, different columns of the website overlap with each other.

When firefox opens a specific website (not in all websites) e.g. http://tinyurl.com/3xxxc43, different columns of the site overlap hiding important parts. In this example, as shown in the figure below, the technical document section overlaps the actual results in the middle. I can't find any help in google or any help in mozilla.

I see the same on the page. <br />
It is caused by a problem with the code and a missing clear: both CSS rule for the table with the search results.
This code in Stylish should fix it:
<pre><nowiki>@-moz-document domain(www.sigmaaldrich.com){
#moreErrorMsgBox+table {clear:both}
}</nowiki></pre>

Flickr: Is there a reference on how IPhoto and Flickr work w/ each other?

I have a pro Flickr account that I want to use as a backup for IPhoto (a basic auto-sync). Do I have to share my events to Flickr? Is there a way to automate this? I am at around 65GB of photos, so I want to get this right the first time...
Thanks!

Don't use the iPhoto uploader. This is a syncing relationship, so if the photos are deleted from iPhoto the next time you link to Flickr they'll be deleted there too.
Check out Flickr Export: http://connectedflow.com/flickrexport/
Regards
TD

I have a brand new ipod touch and when setting it will not connect to my home wifi, even though it is working with all other devices

I have a brand new, just out of the box, ipod touch that will not connec to my home wifi. The connection works with all other devices.

What happens when you try to connect?
Error messages?
Does the iPod see the network?
Have you tried other networks?
See:
iOS: Troubleshooting Wi-Fi networks and connections

Both can connect to test sites but not videochat with each other

I am using a 2GHz PPC iMac on 10.4.6 with external iSight. I can see the Apple ad from one of the test sites. My wife is using a G4 PowerBook running the latest Panther OS with external iSight. She is in a hotel but can also see the Apple ad from the test site. When she was home, we could videochat over Bonjour.
But, while she is in the hotel out of town, we couldn't videochat with each other. Whether one initiated or the other did, we both get the "XXX failed to respond" message even though we obviously did accept the videocall.
If we both can videochat with the test sites, how come we cannot videochat with each other?
Given the above, I hope some experts can rule out a bunch of stuff and let me know the finite (and small) set of potential reasons affecting our situation so that I can work on resolving this efficiently.
What could be the likely problem?
On my side, I use an Apple AEBS that uses DHCP and NAT but my iMac is manually set to 10.0.1.201. I have set the ports in Firewall but even when I turned off Firewall it did not work.
Any help is much appreciated.

Hi Heng-Yee Yong,
The test sites are most likely set to have the ports open by UPnP which does not use NAT.
If you modem is routing and is using Port Forwarding and the Airport is as well then you have two lots of NAT going on at your end.
I would Open Airport Admin Utilty (Applications/Utilities) and log on to the Airport
Go to the Network tab.
Deselect Distributing Addresses which wll trun off NAT in the Airport and make it a Wireless access device.
This means your computer will have to take an IP form the Modem.
This may not be rquired if the modem id is Bridge mode itself as this measn it is not routing and all port will be open without the use of NAT.
This App can help identify if NAT is a problem
http://bleu.west.spy.net/~dustin/projects/natcheck.xtp
Or at least whether you have Consistent NAT or not.
8:50 PM Wednesday; April 26, 2006

Two switches in server mode do not advertise their vlan info. with each other

Hello All,
I have some queries regarding the VTP advertisement as below.
Scenario.....
I have taken two switches named as switch-A and Switch-B connected with each other with port f0/1.I have defined f0/1 as trunk on both the switches.
Then i created the Vlan 2,3,4 on switch-A ,Switch-A configurations revision number got changed from 0 to 3.But when i look up the same on switch-B the revision number is 0 and the vlan that was created on Switch-A is not replicated to Switch-B.
Both Switch-A and Switch-B has default VTP domain configured i.e Null
Both the Switches are in Server mode.
On both the Switches domain password set to null.
Why the vlan is not getting advertise from Switch-A to Switch-B?.According to the vtp configuration they both belong to the same vtp domain i.e null.
So they should advertise the vlan information with each other.
Your suggestion will be appreciated on this.Awaiting for your reply
Thanks,
Mrityunjay singh

Hi Jon,
The trunk is up and running fine.Please find the output for trunk and vtp status as below.
SWITCH-A output---------
SWITCH-A(config)#do sh int f0/1 switch
Name: Fa0/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk private VLANs: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
SWITCH-A(config)#do sh vtp status
VTP Version : 2
Configuration Revision : 3
Maximum VLANs supported locally : 255
Number of existing VLANs : 8
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x58 0xD0 0x3C 0x06 0x01 0xE3 0xD7 0x4D
Configuration last modified by 0.0.0.0 at 3-1-93 00:03:02
Local updater ID is 0.0.0.0 (no valid interface found)
SWITCH-B output.......
SWITCH-B(config)#do sh int f0/1 swit
Name: Fa0/1
Switchport: Enabled
Administrative Mode: trunk
Operational Mode: trunk
Administrative Trunking Encapsulation: dot1q
Operational Trunking Encapsulation: dot1q
Negotiation of Trunking: On
Access Mode VLAN: 1 (default)
Trunking Native Mode VLAN: 1 (default)
Voice VLAN: none
Administrative private-vlan host-association: none
Administrative private-vlan mapping: none
Administrative private-vlan trunk native VLAN: none
Administrative private-vlan trunk encapsulation: dot1q
Administrative private-vlan trunk normal VLANs: none
Administrative private-vlan trunk private VLANs: none
Operational private-vlan: none
Trunking VLANs Enabled: ALL
Pruning VLANs Enabled: 2-1001
Capture Mode Disabled
Capture VLANs Allowed: ALL
SWITCH-B(config)#do sh vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 255
Number of existing VLANs : 5
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0x7D 0x5A 0xA6 0x0E 0x9A 0x72 0xA0 0x3A
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Local updater ID is 0.0.0.0 (no valid interface found)
I have tried by changing the vtp domain name instead of null and it is working fine in that scenario.But my question is why not is works when the vtp domain is set to null on both the switches.
Your update would be appreciated.
Thanks,
Mrityunjay Singh

For WRT1900AC, how do the 4 antennae work with each other?

Similar Messages

Maybe you are looking for