Forbid the reception of the same SN already in stock message IO231 in error
Hello Experts,
I am discovering that is possible to recieve the same part number with same serial number in the plant.
Expl: receive agaisnt PO1 the part number A with SN1, then i can receive again the same part 1 with the same SN1 in the plant.
How can we manage to raise error message at reception in MIGO for this case?
How can i change message IO231 which is in warning know to an error message at reception.
Thanks
regards
Edited by: Moomoz on Jan 6, 2012 5:11 PM
Hi,
Thanks for reply.
The transaction PMS1 doesn't exist. Could you please check?
For TC: S_ALR_87000304 it is going to customizing Serial number parameter, nothing related to the check box you are indicating
And the field is already checked
Thanks
Edited by: Moomoz on Jan 9, 2012 6:16 PM
Edited by: Moomoz on Jan 9, 2012 6:27 PM
Similar Messages
-
Transportation cost before the reception of the material in MIGO (Stock in transit)
Does it exist a way to make a reception of materials in transit and post the transportation cost before the reception of the material in MIGO ?
The material is own of company before to be receipt in plant. We need to pay the transportation before that material is arrived at plant.
As the value is an important cost, we need that this cost be linked with the cost of the material. We can put a condition, but it does not work if the material in not receipt in MIGO. We can enter a subsequent debit memo, but the invoice of the reception should be enter in the system and by the way the reception too. So how should we process to link the transportation cost with the material if this material is not received at plant and by the way in MIGO.
Thanks in advanceHi,
As of my knowledge, system will allow to process the shipment document - create shipment cost document and vendor invoice also, even before doing GR for the PO. Please check the scenario and revert back if you are getting any error.
If you want the shipment cost as delivery cost, refer the note: 427944 - Info: Shipment costs as delivery costs during goods receipt
Regards,
AKPT -
Trying to update my iphone its in recovery mode. Everytime I try the update I get unkown error when it get 3/4 of the way done.
See Here
https://discussions.apple.com/message/15290457#15290457
From the More Like This on the right... -
Is the reception of iPhone 5c better than 5s.
Was advised at a Telstra store that the reception of the iPhone 5s was worse than that of the 5c. Am thinking of upgrading from 4s.
Has anyone experienced this?Not sure about the 5C but the 5S is hugely worse than the 4S for data. And tethering is a dead loss in poor signal areas where it would work reliably with the 4S.
However it's not that simple - the 5S voice call performance seems BETTER than the 4S. I did a 45 minute call yesterday during a drive through several known blackspots where my 4S and indeed other non-Apple phones reliably drop the call, and not only did the 5S maintain the call but I didn't even have any dropped audio at all.
But despite the audio being solid I couldn't get ANY data out of it at all - and yes it was on 3G so should have been able to do voice and data simultaneously.
So my guess is a serious bug in the firmware or baseband around data handling rather than inherently poorer hardware in the 5S. Or at least that's what I hope as one wouldn't expect a newer phone to be worse than the previous model especially after the bizarre mess of the iPhone 4 and antennagate! -
Improving WiFi reception on the receiving end?
I did numerous searches and couldn't find any info that pretained to my problem. We travel extensively in our motorhome to a lot of places that provide wifi, but in many cases, I either get a very low signal or no signal at all because of distance from the antenna. Is there anyway to improve the reception on the MacBook Pro? I see an external antenna by C. Crane that is supposed to work with the Mac. Any input on that or a solution would be appreciated.
Thanks in advance.Looks like a visit to Apple then ?
Cheers
Brian -
Assignment of the asset during the equipment creation
Hello everyone,
I am currently working on the PM-AA interface which consists in linking the asset field (ITOB-ANLNR) of an equipment with the asset number given in the purchase order. The goods receipt (MIGO) creates automatically an equipment (thanks to the serial number profile of the materiel).
As the purchase order contains the asset, I expected that the system would put this value in the corresponding field of the equipment.
In the customizing, we have made the following changes :
- equipment is modified synchronously with tha asset modification
- the assignment of master data fields of assets and equipment includes the asset fields itself
- the serial number profile is assigned to the material and allow the creation of the equipment during the goods receipt.
Has someone already experienced this case? What do I have to do to have the asset number saved in the equipment during its creation?Hi Paul,
Thanks for you answer.
I've already checked these customizing aspects but tjey are not saisfying enough : my customer wants the equipment to be created at the goods receipts in order to save the serial number registered during the reception.
Furthermore, I'm not sure of the process if I create the equipment formerly : will it take into account the material and serial number that are given during the reception of the goods? And how does the system react with more than one equipment? -
What is the deal with the Zen Aurvana headphones?
Can anyone explain this to me? (Please note that I am a review addict, and look at reviews before buying anything so I don't make a regretful choice. One of the things that sealed my decision on the Zen was the 8.3 from CNET.)
I've been deciding to upgrade from the Zen's EP-480 set for a few weeks now, and it's a tossup between the Aurvana and the EP-630.
Problem is, everywhere seems to report that the Aurvana is very average. Looking at customer reviews on retail sites and media critics, they all barely rate the Aurvana above average. Looking in the same sources at the EP-630, it has a close to perfect score from various ones.
Now, here's what blows my mind. I stumble upon Creative's European site, and the reception for the Aurvana is better than the EP-630 set. Other countries seem to love the Aurvana more than the EP-630, while the US does not. See for yourself:
http://hu.europe.creative.com/produc...397&nav=awards
http://hu.europe.creative.com/produc...702&nav=awards
What's the deal here? I need help with my decision from fellow Creative fans. Has anyone owned both?
Message Edited by BetaWolf on 02-15-200802:57 PMI use it quite a bit for zooming in and out (by dragging up and down) but you have to be careful you don't move left or right when doing this as it then becomes a bit unpredictable as you say...
If you just want to use the playhead for dragging left and right (and if you can't find a pref to turn it off) you'll just have to be careful to drag only in the horizontal axis and not up or down..
Cheers
Robo -
Hi there,
I recently had the following situation, where I changed the source of my CSV file in Power Query.
Once I had reloaded the file, it would then not load into Power Pivot. So I disabled the loading from Power Query into Power Pivot. I then enabled the loading to the Data Model. Which then successfully loaded the data into Power Pivot.
But once I went into Power Pivot, had a look, then saved the Excel file. Once saved I closed the Excel file. I then opened the Excel file again and all the sheets that interact with the Power Pivot data work fine.
But if I go and open Power Pivot I get the following error: Unable to load the tables in the Power Pivot Window – An Item with the Same Key has already been added.
This is what I get from the Call Stack
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.AnalysisServices.Common.LinguisticModeling.SynonymModel.AddSynonymCollection(DataModelingColumn column, SynonymCollection synonyms)
at Microsoft.AnalysisServices.Common.LinguisticModeling.LinguisticSchemaLoader.DeserializeSynonymModelFromSchema()
at Microsoft.AnalysisServices.Common.SandboxEditor.LoadLinguisticDesignerState()
at Microsoft.AnalysisServices.Common.SandboxEditor.set_Sandbox(DataModelingSandbox value)
at Microsoft.AnalysisServices.XLHost.Modeler.ClientWindow.RefreshClientWindow(String tableName)
I would assume that the issue is with the synonyms and for some reason, when I disabled the loading of my data into the Power Pivot Model, it did not remove the associations to the actual table and synonyms.
If I renamed the table in Power Pivot it all works fine. So that was my work around. Fortunately I did have a copy of the Excel workbook before I made this change. So I could then go and add back in all the relevant data to my table.
Has anyone had this before and know how to fix it?
http://www.bidn.com/blogs/guavaqHi there
I can share the work book, if possible to send me an email address. As the workbook size is about 9Mb.
Thanks
Gilbert
http://www.bidn.com/blogs/guavaq -
every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.
Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin
-
for some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?
Open the Mac App Store on the other Mac and in the Quick Links sign into your account. See if the Mountain Lion purchase is among hidden apps in the iCloud area of your account info.
-
Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
After upgrading to OS Mountain Lion my separate mailboxes under Gmail no longer appear on the screen. How can I view them? They are still there because I tried to set up another mailbox with the same name & couldn't "because it already exists".
Move your cursor down slowly to the right of the Gmail Mailbox and it should say show or hide.
-
Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
JustinTurns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages. -
Unable to open firefox - get message that " a copy is already open and only one copy can be open at a time. I have dragged the app to the waste basket and downloaded another firefox app. However same result". I have a IMAC , V.10.6.3.
I get above message when I click on the firefox icon.This worked, I used the method described in this link http://forums.mozillazine.org/viewtopic.php?t=365156, and opened the Mozilla profile screen with the terminal on my mac, using the language given in the links. Then I duplicated my original profile to save the bookmarks, etc. Put them in a folder listed Duplicate profile with the date. With the open profile screen, I deleted my original profile, created new profile folder and then a new profile. Note that profile cannot be created in the system library, it must be created on the disc, because the library will not allow writing into it. After I created my new profile folder, I dragged all my old information into it, and it worked. Firefox closed and the error disappeared. You must be VERY careful to make sure Firefox is closed anytime you are doing anything with the profile folders. I think that is what caused my original problem.
-
How can I get Firefox to automatically rename images when clicking "Save image as" on the menu, when an image with the same file name already exists in the folder??
Hello,
That is not a feature that is supported natively within Firefox but there are various add-ons which I think will do the job you need.
The one I have used is [https://addons.mozilla.org/en-US/firefox/addon/web-slide-show/?src=search Web Slide Show]. This is primarily an add-on for viewing a slideshow of images when they are presented as thumbnails on a web page. However once you are in the slideshow there is a download button which will download all the images in the slideshow. It will automatically rename the images if an image with the same name already exists in the folder.
If you don't like that add-on then here are some others that may do the same job:
* [https://addons.mozilla.org/en-US/firefox/addon/image-download-%E2%85%B1/?src=search Image Download II]
* [https://addons.mozilla.org/En-us/firefox/addon/image-picker/ Image Picker]
I hope that helps. Let me know if not.
Also I notice that you are using Firefox v23. That is now an outdated version. To get the latest security updates I suggest updating to version 24. See the support article here: [[Update Firefox to the latest version]].
Maybe you are looking for
-
Hard drive and Battery related issues.
During the start up it shows the message to run the hard drive test and also shows the message that chances of imminent failure of hard drive and my batty backup is also too low.
-
How to add black bars to SIDES of image? Using 'Crop' won't work for this. I explain why.
I have some clips that are off axis and I applied a bit of tilt to correct them. However, I now need to crop the sides giving me a 1.66:1 effect inside the 1.85:1 frame. But how/ Using CROP in Premiere Pro just crops the image off axis. Here is a scr
-
HAS ANYONE HAD A PROBLEM WITH WIRELESS PRINTING ERROR RASTER FILE FAILED
My printer displays error message - opening raster file failed. Has anyone had this happen?
-
I have an older iPHone Type MB384LL probably type 1 or 2 16GB version. It was originally used in USA with an AT&T account. I am now in Bulgaria and using a Bulgarian simcard from a local company - MTel. I am told that if I update the software via
-
When I try to restore my iPod it says "itunes error 9006".
I've done all updates for iTunes & IE8. I've checked security settings and everything. No matter what I do, I get error 9006 when I try to restore it. How do I fix this?