Forbidden 403 suddenly on pages uploaded with DW CS6 on Mountain Lion

Hi
I am just getting reports from users that they are encountering Forbidden 403 messages.
I have checked and I am getting them myself.
All the pages concerned have been updated on the servers since upgrading to DW CS6 on Mountain Lion.
All the FTP remote settings are the same as they were with previous ancient system.
Does anyone know of an issue with permissions that I can look at to sort this please ?
Thanks in hope
Rod

Thanks Preran
Unfortunately I don't really think this might be relevant because my Mac Pro came with Mountain Lion OSX 10.8.2 already installed.
Also I have been perfectly able to access web pages and there are only about 10 or 12 pages over 2 or 3 sites that have started behaiving like this.
At first I thought it was pages uploaded after starting to use CS6 on Mountain Lion, but looking more closely it is something more recent.
Pages affected seem to be those uploaded on or after March 30.
Pages uploaded before that seem to be working normally.
So I now think that this is more likely to be a hosting problem which I need to pursue through the ISP support.
Thanks for your time.

Similar Messages

  • Why my mac keeps uploading with no reason in Mountain Lion

    I installed Mountain Lion recently and I noticed that my mac keeps uploading without any reason. I am using iStat and outgoing is always at 100kbps. I dont have any app runing. Its already happened several times.
    I am using a limited broadband so I am so worried about it.
    Any suggestion?
    Thanks

    HI
    i having problem :
    location servics enables (nothing in list)(no app in list which accesses location),
    icloud "find my mac" enabled,
    and WHEN I TRY TO FIND MY MACBOOK ON icloud or "find my iphone app" on iphone.
    it says:
    "ONLINE,LOCATION UNAVAILABLE"
    and one more thing, when i set "time & date" to "set automactic according to my location"
    then the result is "unable to determine location at this time."
    CAN ANYONE TELL, HOW TO MAKE LOCATIONS ACCESSED? IS IT WIFI SETTINGS? OR IS IT OTHER SETTINGS BEYOND MAC .???

  • Hanging problem with Adobe CS6 in Mountain Lion

    I recently upgraded my retina Macbook pro to Mountain Lion and was having some trouble with Adobe CS6 apps hanging on startup among other things (including iCal crashing on startup)
    I did a clean install of Mountain Lion and Manually rebuilt my applications folder so that Adobe MAster COllection was installed freshly on a clean install of ML.
    Now it is still sporadically hanging when I try to open Photoshop, Bridge or other Adobe apps. The only thing that seems to fix it is a restart which is inconvenient when you're in the middle of work.
    ANy ideas?

    Thanks for this. I had heard of the fonts problem some people have had. All my fonts were freshly installed by either the system or Adobe when I installed Master Collection. Following your advice, I just verified every font and the only problem that showed up (as you had predicted) was a minor duplication which I corrected. So, it seems unlikely to be the fonts.
    As for your other point, I have been using Final Cut Pro X and that has worked fine. The only other app that has given me trouble has been Calendar which seems to get strangely stuck sometimes while it is updating. Makes me wonder if there's something going on with the network I'm using. 
    One thing I hadn't thought of was that it could be a problem with gfx card switcher. This seems unlikely but I'll try disabling it and see if that helps.
    Weirdly, today when I had this issue, Photoshop loaded up ok but then hung when I tried to load any file into it. Bridge wouldn't start at all. I didn't try the others. Yesterday I was having problems with Illustrator.
    Anyway, I see what you mean about it not being a widespread problem - which is why I started this thread. It seems no one else is having any issues. If anyone else knows what I should look for in my configuration please let me know.

  • Mouse problems with Illustrator CS6 and Mountain Lion

    The mouse in Illustrator selects and deselects as it moves over buttons and cells:
    1. In Graph data the cells the mouse passes over go dark grey if not already selected, then deselect if they are selected. This makes it very difficult to use the data cells.
    2. In Layers window, where I may have 100s of layers, I want to hide one layer or more which are not necessarily adjacent to each other. Illustrator hides all of the layers it passes. It is very difficult to click and unclick the show/hide button (and also the lock button). Ditto with show or unlock toggle layer. I had to start up in Lion in which Illustrator does not have this problem in order to get a job finished in time.
    Seems there needs to be a fix for Illustrator to work properly in Mountain Lion.
    Has anyone found such a fix?

    No I don't have Right-Zoom (don't know what it is), but I have the same problem with Apple's Track Pad, which I don't use much and I only use the inbuilt software.
    I use Kensington Slim Blade and before that LogiTech's marble mouse and both need their software to work properly.
    All of them work fine in Lion and earlier. Could it be that Adobe has overlooked some new aspect that’s in Mountain Lion which, in my case, needs to be fixed for Illustrator?

  • I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

    i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
    i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
    i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
    now the things i want to use with my mac that i thought would be even simpler...are not even useable...
    help

    That camera shoots H.264 in an .avi wrapper.
    You will have to transfer the files via the Finder.
    Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
    Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

  • Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

    After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
    Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
    Problem:
    - New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions. 
    - When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi. 
    - The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install). 
    Solution:
    1) Install Canon Printer Drivers and Software (from official Canon site)
    Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
    Canon 860 Series Drivers & Software  for OSX 10.8 Mountain Lion:
    The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
    1 Printer Driver
    (Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
    2 Scanner Driver
    (Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
    3 Network Tool
    (Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
    Canon Software for using advanced printing and scanning functions (while connected to network)
    4 Solution Menu
    (Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
    5 MP Navigator EX
    (Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
    6 Easy-PhotoPrint EX
    (Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
    Canon Support (HK) – check your local site
    http://www.canon.com.hk/en/download/main/index.do
    Select Product and drivers from support site eg http://support-hk.canon-asia.com/
    1. Choose a product category
    Multifunctional Printers
    2. Choose a product series
      Pixma
    3. Choose a product model
      Pixma MX868
    4. Choose type of document
    Downloads or FAQ
    If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
    2) Check Canon Printer and Software Working while connected via USB
    Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB.  Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’).  This is normally done as part of the automatic install but worth double checking
    3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
    After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
    Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
    DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list).  The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
    You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
    If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List.  It should say WLAN Active, identify the SSID and have an IP address
    If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

    Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

  • How many computers can be upgraded with one 1 purchase mountain lion?

    How many computers can be upgraded with one 1 purchase mountain lion?

    What if I have a Mac with a different apple ID. Can I sign out of that ID and sign in with my other ID and still download it with one purchase?

  • I have two macs in my house.  One is newer and came with the os x mountain lion software and the other one needs to be upgraded.  I was wondering if there is a way to take upgrade from one to the other?  Should not have to buy this software again.

    I have two macs in my house.  One is newer and came with the os x mountain lion software and the other one needs to be upgraded.  I was wondering if there is a way to take upgrade from one to the other?  Should not have to buy this software again.

    Welcome to Apple Support Communities
    Buy it for the other computer. Mountain Lion is preinstalled on the new Mac, but you can only use it in the new one

  • Does anyone know of any issues with photoshop CS4 and Mountain Lion?

    Does anyone know of any issues with photoshop CS4 and Mountain Lion?

    See here:
    http://www.macrumors.com/2012/07/25/adobe-and-avid-report-only-minor-issues-with -mountain-lion/

  • Problems with connection to the Mountain Lion

    Someone is having problems with connection on Mac Mountain Lion? I did a clean install and the connection is unstable.

    Have you tried to reset your network settings ?
    What I would do is delete the connection, and then retry the set up of that connection.
    System Preferences>Network, select Wi-Fi on the left and then click on the 'minus' button

  • Does anyone know of a good A3 photo scanner compatable with OS 10.8 mountain lion? I need it to scan watercolour artwork. I was interested in Microtek scanmaker 9800XL and also Epson Expression 10000 but neither are compatible. Thanks :-)

    Does anyone know of a good A3 photo scanner compatable with OS 10.8 mountain lion? I need it to scan watercolour artwork. I was interested in Microtek scanmaker 9800XL and also Epson Expression 10000 but neither are compatible. Thanks :-)

    Daniel Craigie-
    How full is the hard drive that you are trying to save to? Not that it should matter, but have you tried scanning another document?
    Is the scanner plugged directly into the Mac? Try it that way.
    Disconnect all peripherals except keyboard, monitor, mouse and scanner and see if the problem goes away.
    Luck-
    -DaddyPaycheck

  • In imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

    in imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

    in imovie 11, with an iMac, latest Mountain Lion, sometimes I insert a still and when I playback, the previous image freezes the last frame and holds during the duration I set for the still, skips both transitions, and jumps to the next clip. why?

  • After encrypting with filevault 2 on mountain lion, safari is extremely slow

    after encrypting with filevault2 on mountain lion, safari is running extremely slow.
    it's taking more than 45 seconds (sometimes a full minute) to load pages.
    my internet speeds are 35 mbps download and 6.35 mpbs upload, so it's not my internet connection.
    i have deleted the cache files and the system preferences.
    i'm finding that chrome is faster, but i'm seeing slowness there too.
    in encrypted using filevault 2.0 yesterday, all software is up to date.
    can anyone please help me with this?  i don't want to have to turn off filevault.
    thanks!

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have a wrong owner. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID \) -ls
    Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    Post any lines of output that appear below what you entered — the text, please, not a screenshot.
    If any personal information appears in the output, edit before posting, but don’t remove the context.

  • Problems reading PDF files with i Pad and Mac with 10.8.3 Mountain Lion OS

    I assume InDesign uses the Acrobat XI resources to generate the exported PDFs.
    I have many 1-7 page articles from which I created PDFs via the export function in ID. They all read OK on PC/Apple/Linux based computers.
    I assembled all of the articles into one 50 page document in ID and again exported the large file as a PDF.
    Several of the articles inside the large document now exhibit problems when viewed on an i Pad or a Mac running OS 10.8.3 (Mountain Lion). PC and Linux do not have this problem.
    The problems are, to quote my subscriber: "each paragraph starts with a 'dollar' sign instead of 'Th'. Later the 'Dollar' symbol changes to ' " '. The same thing happens in the Piston Ring article. This doesn't happen on the original PDF files.
    Opening the files in Acrobat Pro XI to look for differences does not discover anything although I assume the problem is somewhere in the font files.
    Any suggestions?

    I've asked the question about the versions and producers of the PDF reader software he is using. I'll be back when that answer comes in.
    I was afraid that Adobe might not use code identical to Acrobat Pro XI to generate PDFs in InDesign. I may have to 'print' to Acrobat and see if that generates a trouble-free PDF.

  • Canon iR7105, iR-ADV9065 with GX300 server, and Mountain Lion

    I am having no luck setting up two relatively recent, large and expensive Canon printers in Mountain Lion. The situations are different so there are two chapters to this wall of text.
    This is a fresh Mac, so it didn't have any 'old' Canon driver trash on it. I have installed UFRII 2.43 and PS 3.60 from Canon and restarted.
    The iR7105
    The iR7105 doesn't show up automatically in the Print & Scan add-printer menus. No problem; I go to IP, using LPD, and set it up there. (LPD access is enabled in the printer.) After that, I have tried setting it up with each of three drivers: a nondescript Canon iR7086-7105, Canon iR7086-7105 PS (US), and Canon iR7086-7105 UFR II (US).
    The nondescript driver results in no setup options for the printer, so I know there's  a problem. This is, however, the closest to a successful setup I have so far. In the print dialog I get finishing options that seem promising, including for our saddle finisher. However, the saddle finisher doesn't engage when I send the print job -- I have to assume this is because the print driver doesn't have a setup where I can tell it what model of  finisher it needs to talk to? Further, there are no options for printing to the printer's Mail Boxes, so I can't just send a file there and fix up the saddle stitch on the printer directly (a workaround we've used with various jobs in the past). However, after the job has run, I CAN go into Command Workstation 5.4.1.25 and adjust the settings on the job there, and then get it to run through the saddle finisher (or to the Mail Boxes). This is the best I have so far, but it's not very good.
    So I try to set up the PS driver. Now I get setup options and I can select the saddle finisher model. I also get a popup asking about unidirectional or bidirectional; I choose bidirectional because the printer is on a network. Also, setting it to unidirectional doesn't change what happens next:  when I do send the print job, the printer cheerfully spits out a dozen or more pages of single-line garbage instead of what I sent to print.
    On to the UFR II driver. Again I get setup options as expected when I set up the printer. Again, the print options are exactly what I expect as well. Unfortunately, the print job doesn't go through: I get an error that says, "Canon UFR II Printer Driver / Cannot communicate with the printer, or the printer is not supported. If the printer is supported, check the printer connection and add it again, then start Printer Utility to get the printer information." Well, the printer is pretty certainly connected, based on the performances above. It's also supported, if Canon's suggesting I should download and use this driver is any indication. Finally, Printer Utility gets printer information that looks quite accurate. Nevertheless, after all of that, actual attempts to print still get the UFR II Printer Driver error message, and no prints.
    The iR-ADV9065 and its GX300V2.0US server
    After installing all the Canon drivers mentioned above, the print server (Canon iR-ADV C9000s GX300V2.0US) shows up in the '+' drop-down in Print & Scan. Great, right?! I can configure the server directly and control the printer that way! Yay!
    Nope. I get a warning: "Some of the software for the printer is missing. You may have to reinstall the software to be able to successfully print." I click Continue, since that's an option, and then I get "Setting up 'Canon iR-ADV C9000s GX300V2.0US...' The software for the printer was installed incorrectly. Please reinstall the software from the manufacturer." This time there is no option except Cancel.
    What would be awesome now would be to know what software I need to reinstall. Since I just installed the UFRII and the PS software on a fresh Mac, I'm not sure what's missing.
    So, back to manually installing with the IP address. From this point forward the results mimic those above, with variations for the printer's specific capabilities. The best driver option is still the non-PS, non-UFR version, and that 'best' option still won't control the finishing units. I must go through Command WorkStation to accomplish that.
    Bottom Line
    Because I am so close to having these set up properly, but not quite, I feel like I must be doing something wrong. Something small and subtle, probably, but hey, maybe it's something big and glaring! Can anyone help?

    mapinoregon wrote:
    The iR7105
    The iR7105 doesn't show up automatically in the Print & Scan add-printer menus.
    The Canon print controllers do not support Bonjour, so using IP > LPD as you have done is the correct procedure.
    mapinoregon wrote:
    The iR7105
    The nondescript driver results in no setup options for the printer, so I know there's  a problem.
    There's no problem. This is how the PPD works on 10.8. For older versions of PPD it was necessary to configure the options. But with the latest versions of PPD, it is assumed that all options are available, even when the machine may not have them or supports them.
    mapinoregon wrote:
    The iR7105
    In the print dialog I get finishing options that seem promising, including for our saddle finisher. However, the saddle finisher doesn't engage when I send the print job -- I have to assume this is because the print driver doesn't have a setup where I can tell it what model of  finisher it needs to talk to?
    It is not a lack of being able to set what finisher you have installed. You just cannot saddle-finish with the PPD. This is only supported with the full driver, such as the UFR2 or PS, because you need the additional plugins that are included with these full drivers to get the additional functions.
    mapinoregon wrote:
    The iR7105
    Further, there are no options for printing to the printer's Mail Boxes, so I can't just send a file there and fix up the saddle stitch on the printer directly (a workaround we've used with various jobs in the past).
    Again, this is due to the lack of a plugin to support the submission to the mailbox. So it is another limitation of the PPD.
    And with you sending the print job to the mailbox in the past, you would have been using a full driver - not the PPD - to achieve this.
    mapinoregon wrote:
    The iR7105
    However, after the job has run, I CAN go into Command Workstation 5.4.1.25 and adjust the settings on the job there, and then get it to run through the saddle finisher (or to the Mail Boxes). This is the best I have so far, but it's not very good.
    If you can connect to the iR7105 with Command Workstation, then you must have a Fiery connected to it, such as the imagePASS-S2. So this would explain why the UFR2 and Canon PS v3.60 driver did not work. The Fiery does not support either driver. They are for the iR7105 that is using its internal Canon controller. Not the optional imagePASS (Fiery).
    Now the issue for you with the imagePASS-S2 is that no 10.8 driver exists - the iR7105 was released in mid 2006. So you will have to use the Fiery Express driver, which has limited functions but it is better than using the Generic Postscript driver.
    mapinoregon wrote:
    The iR-ADV9065 and its GX300V2.0US server
    After installing all the Canon drivers mentioned above, the print server (Canon iR-ADV C9000s GX300V2.0US) shows up in the '+' drop-down in Print & Scan. Great, right?! I can configure the server directly and control the printer that way! Yay!
    Nope. I get a warning: "Some of the software for the printer is missing. You may have to reinstall the software to be able to successfully print." I click Continue, since that's an option, and then I get "Setting up 'Canon iR-ADV C9000s GX300V2.0US...' The software for the printer was installed incorrectly. Please reinstall the software from the manufacturer." This time there is no option except Cancel.
    Like the iR7105 with the Fiery attached, the GX300 connected to the ADV C9065 does not support the UFR2 or PS v3.60 driver. But at least there is a 10.8 driver available for this model. Here is a link to the GX300 page from Canon USA.
    Now with this driver installed you can add it by selecting the "Canon iR-ADV C9000s GX300V2.0US" that appears in the Default Add Printer view (and the Nearby Printers window). The driver should be automatically found by the Mac, meaning the Use menu will be set to the correct driver. This will let you print and use most finishing features of the iR ADV C9065.
    Hope the above helps you. Reply if you need more info.

Maybe you are looking for

  • Flat file to Target Table Mapping.

    Hi All, OWB Client 9.0.2.56.0 OWB Repository 9.0.2.0 WIN - NT 196 MB RAM. I created a mapping which involved a fixed width text file ( Size of text file is 5 MB & number of columns around 28), applied some filter criteria & performed insert operation

  • Help me in Stateless & Stateful Bean

    hi, I'm trying to understand to difference between the stateless and stateful bean. I had created an simple application to test it. But both the beans seems to work in the same way. Could some one explain me with an example the difference between the

  • Work status custom report

    Hi Gurus, I have built a work status custom report. The user was able to change status. When i run my custom EVDRE report no values are retrived for status, user and date/time stamp columns. I am using simple EVLCK function. I think something is bloc

  • Disaggregation Best Practice

    Hello, What are the best practices for disaggregation in APO?  Is there any good documentation for when to use each type of disaggregation?  If so, please forward to me.  Can anyone explain exactly how the "generate proportional factors" program in A

  • Can anyone help me with this StackOverFlow error? Running mergesort

    * Write a description of class Sorter here. * @author (your name) * @version (a version number or a date) public class Sorter      public static long comparisons = 0;     public static long exchanges   = 0;     static int M = 10;     static double au