Forbidden Entry to Https sites

When I first Installed safari 4 I had no problem surfing and entering Https sites, but suddenly Safari stopped allowing entry to Https sites. I tried resetting which made no difference, I then tried uninstalling and installed safari 3 but I had the same problem, so I uninstalled that and re-installed safari 4, in preferences/security I set cookies to always, I still cannoot access any Https site including the apple ones!
Any help that can be provided with this problem would be much appreciated as I do like very much the safari browser but without access to Https sites it is really unuseable.

I have the same problem
and i have checked that https proxy isn't checked
but after an succesful login to the site it hangs...
i hope there is somting else
i reset safari and cleared all history
running on an macair with osx 10.5.7

Similar Messages

Sharepoint warmup script for https sites

we want to warm up https site which is based on sharepoint 2010.
When we run some sample powershells it shows access forbidden error so we are not able to warm up https site.
Its slow on first load so need some warmup script for https sites.
sharepointer

Just ensure that the service account that you use to trigger the Powershell scripts has access to IIS and SharePoint. Most often, the SharePoint Farm account would be used for scheduling the warm up scripts on the WFE server.
I trust that answers your question...
Thanks
C
http://www.cjvandyk.com/blog

Entry Point Drop Site Key (to 9 chars) = LOCY11740 has no effect

We have the following entry in two places within our .PST file.
Entry Point Drop Site Key (to 9 chars) = LOCY11740
I am expecting to see "LOCY11740" in position 52 of the .CSM mail.dat file. Instead I see "ORIGIN".
We are testing using Presort rel 8.00c.09.00 and generating vers 11-2 Mail.Dat files.
1. Am I using the correct parameter in the PST file?
2. Is there another PST field that is causing "ORIGIN" to appear?
Postal 1 TEM will flag CSM entries with "ORIGIN" as warnings. One for each CSM record!

Hi Paul,
Kendra is correct, according to latest mail.dat spec 12-0 (and also in 11-2) the description of the field Entry Point - Actual / Delivery - Locale Key says
US = LOCA12345 (LOC plus 6 bytes of the Locale key from the drop ship product); u2018ORIGINu2019 for origin entered mail; CAN =A1A 9Z9; u2018FORu2019 for International mail. The field can have a Locale key for origin entered mail when USPS Pick Up is equal to N. See Scenarios and Definitions Sections for alternatives for populating this field. Use value of u2018ORIGINu2019 for Origin/DMU Entered mail OR for US Drop Ship, Zone Skipped, and BMEU entered Mail use the Locale Key ("LOC" in the first 3 bytes, balance is the 6-byte of the USPS dropsite key, also known as the Locale Key); For Canadian mail, use 6 digit Canadian code of Entry facility e.g., A1A9Z9.
According to PostalOne! tech guide available at https://ribbs.usps.gov/intelligentmail_guides/documents/tech_guides/datspec/PostalOneMailDatTechSpec.pdf says the same thing.
0673
Alphanumeric Data Type Error: Entry Point u2013 Actual/Delivery Locale Key must be an alphanumeric value, must contain 'ORIGIN' when the Entry Point for Entry Discount Facility is set to O or H, and must precede with "LOC" plus 6 alphanumeric characters when the Entry Point for Entry Discount Facility is set to B, R, S, D, A, C, K, J, E, L, T, or Q in the .csm file.
Presort is correct in populating this field with ORIGIN in case of Entry Point Type ="O-Origin".
Thanks
Anita S.

Issue connecting to HTTPS site through CURL

All,
I am having trouble requesting info from HTTPS site using CURL and PHP. I am using Solaris 10. It so happens that sometimes it works and sometimes it doesn't. I am not sure what is the cause. If it doesn't work, this is the entry recorded in the verbose log:
* About to connect() to 10.10.101.12 port 443 (#0)
*   Trying 10.10.101.12... * connected
* Connected to 10.10.101.12 (10.10.101.12) port 443 (#0)
* error setting certificate verify locations, continuing anyway:
*   CAfile: /etc/opt/webstack/curl/curlCA
CApath: none
* error:80089077:lib(128):func(137):reason(119)
* Closing connection #0If it works, this is the entry recorded in the verbose log:
* About to connect() to 10.10.101.12 port 443 (#0)
*   Trying 10.10.101.12... * connected
* Connected to 10.10.101.12 (10.10.101.12) port 443 (#0)
* error setting certificate verify locations, continuing anyway:
*   CAfile: /etc/opt/webstack/curl/curlCA
CApath: none
* SSL connection using DHE-RSA-AES256-SHA
* Server certificate:
*        subject: C=CA, ST=British Columnbia, L=Vancouver, O=google, OU=FDN, CN=g.googlenet.com, [email protected]
*        start date: 2007-07-24 23:06:32 GMT
*        expire date: 2027-09-07 23:06:32 GMT
*        issuer: C=US, ST=California, L=Sunnyvale, O=Google, OU=Certificate Authority, CN=support, [email protected]
*        SSL certificate verify result: unable to get local issuer certificate (20), continuing anyway.
POST /gportal/gpmgr HTTP/1.1^MHost: 10.10.101.12^M
Accept: */*^M
Accept-Encoding: gzip,deflate^M
Content-Length: 1623^M
Content-Type: application/x-www-form-urlencoded^M
Expect: 100-continue^M
^M
< HTTP/1.1 100 Continue^M
< HTTP/1.1 200 OK^M
< Date: Wed, 28 Apr 2010 21:56:15 GMT^M
< Server: Apache^M
< Cache-Control: no-cache^M
< Pragma: no-cache^M
< Vary: Accept-Encoding^M
< Content-Encoding: gzip^M
< Content-Length: 1453^M
< Content-Type: application/json^M
< ^M
* Connection #0 to host 10.10.101.12 left intact
* Closing connection #0My CURL options are as under:
    $ch = curl_init();
    $devnull = fopen('/tmp/curlcookie.txt', 'w');
    $fp_err = fopen('/tmp/verbose_file.txt', 'ab+');
    fwrite($fp_err, date('Y-m-d H:i:s')."\n\n");
    curl_setopt($ch, CURLOPT_STDERR, $devnull);
    curl_setopt($ch, CURLOPT_POST, 1);
    curl_setopt($ch, CURLOPT_URL, $desturl);
    curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
    curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
    curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, false);
    curl_setopt($ch, CURLOPT_HEADER, false);
    curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 0);
    curl_setopt($ch, CURLOPT_CONNECTTIMEOUT,120);
    curl_setopt($ch, CURLOPT_AUTOREFERER, true);
    curl_setopt($ch, CURLOPT_ENCODING, 'gzip,deflate');
    curl_setopt($ch, CURLOPT_POSTFIELDS, $postdata);
    curl_setopt($ch, CURLOPT_VERBOSE,1);
    curl_setopt($ch, CURLOPT_FAILONERROR, true);
    curl_setopt($ch, CURLOPT_STDERR, $fp_err);
    $ret = curl_exec($ch);Anybody has any idea, why it works sometimes but fails mostly? The error I am trying to solve is error:80089077:lib(128):func(137):reason(119)
Thanks

There seems to be some confusion here. Maybe I misunderstood your original question...
Glassfish is an Java application server.
Since you were reporting issues with PHP, I assumed you were referring to an apache httpd server.
Coolstack is a repository which contains a version of both tomcat and apache.
So I suppose that glassfish could be considered to be a replacement for the tomcat in coolstack.
However since their so different. I would have said competitor rather than replacement.
But arent we talking about apache?
But the root of the problem is actually an openssl bug.
So the issue would be to install a different copy of openssl. Then use applications that are linked against it.
Whether curl or apache or tomcat. Whatever you are seeing the problem in.
So I was more suggesting that you could try a different version of curl/openssl. It doesnt matter if you get it from coolstack or sunfreeware, or blastwave or opencsw. Or compile it yourself.
But I suggest you try patching first and hopefully you can fix the version your already using rather than replacing large amounts of software with a completely new version.

Moving Blog Entries To Other Site

I have 2 sites that are really the same site but in two languages. In order to save on layout time, I have successfully duplicated most sections, but, as we know, I can't duplicate the Blog. However, I know it's possible to duplicate the individual Blog entries. Is it possible to move the duplicated entries from one site to another? If not, can I save the first Blog as a template?
Thanks!

Just found the answer to my own question: the wonderful JTemplate! :
http://www.jinx.de/jTemplate.html
Perfect!
G5 Dual 2Ghz Mac OS X (10.3.8)

Unable to open secure(https) site in some profiles

unable to open https sites
== URL of affected sites ==
https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false&continue=http%3A%2F%2Fmail.google.com%2Fmail%2F%3Fhl%3Den%26tab%3Dwm%26ui%3Dhtml%26zy%3Dl&bsv=1eic6yu9oa4y3&scc=1&ltmpl=default&ltmplcache=2&hl=en

Hi Srini,
Check the job overviews and spools using T code SM37. Verify that there were no errors when running AJAB and AJRW. Also, check the last fiscal year closed for each Comany Code using T code OAAQ.
Some clients are kept more up-to-date than others. For example, the Development and Quality clients may not be as up-to-date as the Production client. Verify that depreciation ran for all months up to the closed fiscal year (if not ran, will see error in SM37), and verify that all previous years have been closed (last closed fiscal year can be seen in OAAQ).
Hope this helps!
Thanks,
Chad

Can only connect to HTTPS (secure) sites and can't connect to HTTP sites

In short I CAN ONLY connect to HTTPS sites, meaning secure.
I've narrowed this down to an issue regrading my mac book pro and the wireless router.
Router:
- not sure of the make model
- other computers CAN connect to this router and go online
My Mac:
- Mac Book Pro
- OS X 10.6
- I can connect to other wireless networks just fine
- I can surf the web for about 10 minutes or so then it blocks ALL http traffic
and i'm only allowed to https sites
going to a http site results in a "page is taking to long to respond"
please anything?

The router is a Verizon MI424WR
hope that helps, but i doubt it will...
just to also clairfy http sites either go really slow then time out only never to come back, https are blazing fast

Problems with receiving error message "This Connection is Untrusted" for any https sites. On version 17.0.1 of firefox. IE does not get error.

whenever I go to an https site, I get this error message. My other browsers are not having the same issue. I deleted cert8.db as one site suggested. Stopped using firefox due to this issue. example: www.comcast.net, once I sign into email, I get this error message. Amazon.com - same issue. So, these are very common sites. This only started in past two weeks.

Does updating to Firefox 18 (which comes out today) help? It fixed a few issues with certificates.

Unable to authenticate to https sites using ntlmv2 on Mac OS 10.6 and Firefox 11.0

I am using a Mac with OS X 10.6. The Firefox version is 11.0.
we cannot authenticate to https:// sites that require NTLMv2. We were able to use Firefox on the Mac to authenticate to https:// sites until our organization dropped NTLMv1 and required the use of NTLMv2. The problem on the PC was corrected by using the NTLM plugin but we have never managed to correct the problem on the Mac. The operating system does not appear to be the problem since Safari can authenticate to these sites. I have added the https:// url to the network.negotiate-auth.delegation-uris, network.negotiate-auth.trusted-uris and the network.automatic-ntlm-auth.trusted-uris parameters (which is necessary to correct the problem on the PC). After reading the thread about ntlmv2 authentication in Lion I also set network.automatic-ntlm-auth.allow-proxies and network.negotiate-auth.allow-proxies to false but I still can't authenticate. I also tried creating an nsmb.conf file in /etc with minauth=ntlmv2

Hi
Thanks for the posts. I set network.ntlm.send-lm-response to TRUE but the behavior was the same. I changed https:// to http:// and made sure there were no trailing /'s but still cannot authenticate

Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

Safari keeps giving and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
It only seams to have a problem with https sites.
Any help would be appreciated

The "s" in "https" indicates the site is a secure server--usually a site that will require a password. Connections to secure servers can be blocked by parental controls. Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)? If so, check the settings to make sure they will allow the connection.

Unable to download document from HTTPS site in ADF

Hi ADF Experts,
I have a critical issue in ADF application. While clicking on hyperlink for download a document ,i am getting following error:
"unable to download home from "<HTTPS SITE NAME>" The link is having HTTPS.
This problem is occurring in i.e 8, It's working fine in i.e 9.
Please suggest me with some solution.

hi mate,
have you tried uninstalling then reinstalling Nokia Browser from http://download.browser.ovi.com ? also try the same with Opera at http://m.opera.com Also check that you are fully up to date with your phone firmware by using Nokia Suite to check for any firmware updates.

Open a pdf file with Acrobat Reader/Pro from a https site using ie

Hi!
I somehow don't manage to open a pdf file directly with Acrobat Reader/Pro when trying to open it from a https site and using ie8.
With http sites everything works just fine.
Are there any settings to enable this with https sites?
Greetings
Laura

Reader is a different product
http://forums.adobe.com/community/adobe_reader_forums

Firefox can access HTTPS but not HTTP sites

Hi,
All of a sudden last Friday afternoon I could not load any sites external to our corporate network over HTTP in firefox; HTTPS still works fine. Also IE doesn't have any problems.
So far I've tried uninstalling and reinstalling, creating a new profile, disabling IPV6, disabling DNS prefetching and checking my firewall settings. I've also used wireshark to try and see what firefox is doing, but it seems that no traffic at all appears when an HTTP website is accessed, however accessing an HTTPS site does generate traffic.
We use Windows firewall with advanced security; I can't change much though because it is controlled by policy.
We also use McAfee for antivirus and Bluecoat for filtering; again I can't change anything here because they are either policy controlled or administered from elsewhere.
I think I can rule out Bluecoat as other PC's on our site can and still are using Firefox 4 to access the web.
Any help would be much appreciated.
Many thanks
Matthew Rose

Two different sites, one with .info and one with .net. One works perfectly without issue and they each have similar settings in Server, however one only seems to want to work using https prefix. The sites are both different and therefore needs to be accessed with http at this point. The problem is when I go to http://example.info it takes me to http://example.net which is not what needs to be occuring. This occurs internally and externally. Before the move I did my server was doing DNS as well and those settings have not changed or been modified except when I had to change their outside static IPs.

Working with firefox 28 on WinXP. https sites load well, but http sites do NOT load at all. Same happens on other browsers

I've tried uninstalling, downgrading, upgrading Firefox (from version 17 to Aurora)
and still the problem persists! I've shut down firewall, performed malware checks,
cleared cache, history and cookies, started in safemode, and still nothing!!
'https' sites (such as Facebook) load perfectly well, as opposed to 'http' sites that do
NOT load at all, getting the following error:
«Firefox could not establish connection to server in www.example.com.
- The website may be temporarily unavailable or busy. Try again in a few moments.
- If you can't load any page please check your computer Internet connection.
- If your computer or Internet connection is protected by firewall or proxy,
verify if «browser» has permission to connect to the Web.»
I have the same version of firefox running on win7 on other computer and it works
normally!
Some 'http' sites will load if I insert an 's' after 'http' making them apparently
'https'.
Help please!! Thank you!!

well here it is, but are you able to...., but how big can you see this image, or are it just to load it down to paint, well here it is, and as i said, you must translate it, or you must tell me if it are possible and how i change the language, because this was downloaded on norwegian.well, as i said here is it!

I get an Invalid Certificate notice when I try to access my https site for my printer. The serial number is the same as used by another certificate. In IE I was able to proceed to this address, but Firefox won't give me that option

I get an Invalid Certificate notice when I try to access my https site for my printer. The serial number is the same as used by another certificate. In IE I was able to proceed to this address, but Firefox won't give me that option

Hello,
Thanks for contacting Mozilla Support!
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Forbidden Entry to Https sites

Similar Messages

Maybe you are looking for