Forbidden: Error 403

I just changed modems recently. Ever since I installed the new modem I can only get Firefox to work as my browser.
This is what I see in Safari:
Forbidden
You don't have permission to access http://www.google.com/ on this server.
Apache Server at www.google.com Port 8100
Any suggestions on how to fix this? I've tried resetting Safari and redownloading it. I currently have 3.1.2 installed.
Thank you!
M

Check the modem documentation for more answers.
HTTP is port 80 (not 8100).
All come with some "configuration" software that uses a browser to make settings changes. You enter a specific address in the browser window and "talk" to the modem to make changes.
Most modems also include a "reset" button (usually recessed) that should set back to factory defaults while others need to be unplugged for five minutes to reset.

Similar Messages

[SOLVED] Apache Access forbidden Error 403 localhost

Hello,
I believe this should be some thing very stupid, but I can't find it... so here I am.
I have just installed apache (# pacman -S apache)
Configured httpd.comf, and created 2 virtual hosts with extra/httpd-vhosts.conf
When I believed every thing was ok, I have started Apache as root (# apachectl start)
Started ok, no errors (also tried start it as user with sudo, and /etc/init.d/httpd start)
So when I go to http://localhos (or the virtual host) I allways get Access forbidden Error 403
I have set 777 permissions to /srv/http and the virtual host (/home/username/local-web/site1.dev)
I have tried every thing , changed dir owners to "http:http" ...
At the Apache error log I get:
"[Thu Oct 29 02:39:48 2009] [error] [client 127.0.0.1] (13)Permission denied: access to / denied"
There is a very simple plain index.html file at /srv/http and the virtual host, all file/dir permissions very permisive... so that can't be the problem.
Am I missing some thing? Do I need to manually create the "http" user and/or add it to some group?
Last edited by iopo (2009-10-29 22:06:59)

Ok, here's the code:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "/var/log/httpd/foo_log"
# with ServerRoot set to "/etc/httpd" will be interpreted by the
# server as "/etc/httpd//var/log/httpd/foo_log".
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk. If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
ServerRoot "/etc/httpd"
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule cache_module modules/mod_cache.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule substitute_module modules/mod_substitute.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule log_forensic_module modules/mod_log_forensic.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule usertrack_module modules/mod_usertrack.so
# LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule cgid_module modules/mod_cgid.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.2/mod/core.html#options
# for more information.
# Options Indexes FollowSymLinks
Options Indexes All
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# Options FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
<Directory "/home/gral/web-sit/local">
Options +Indexes FollowSymLinks +ExecCGI
AllowOverride AuthConfig FileInfo
Order allow,deny
Allow from all
</Directory>
# this was just a test
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock /var/run/httpd/cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall is used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
#EnableMMAP off
#EnableSendfile off
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

How do I get rid of forbidden error 403 in app store

Cannot update some apps as a result. Any help is appreciated ... I'm sick and tired of shifting from Lion to Leopard and so on depending on the flavor of the day that Lion decides to go bonkers on.

I'm sick and tired of shifting from Lion to Leopard
The App Store cannot be accessed on Leopard.
Check out this thread > server error: 403 forbidden

Forbidden error 403 when i download from App store??

I have a brand new mac book pro, tried to download pages app, it took the 20 bucks out of my account but I am unable to actually install because of the error? this is a new macbook, barely 2 weeks old, whats going on???

Might be help for you here > https://discussions.apple.com/thread/2751417?start=0&tstart=0

Error message when trying to sign in to HP ePrint "ajax submit failed: error = 403, forbidden"

HP Photosmart 7525
Windows 7
Ajax submit failed: error = 403, Forbidden
Installed new printer: Photosmart 7525
I am trying to set up my ePrint account and add my printer and it won't let me sign in or create a new account.
Thanks for your help!
Deb
This question was solved.
View Solution.

One can also restart the computer.After it shuts down leave it off for at least a minute and then reattempt access the site once computer is back on and running. I would also check to make sure that Java is up to date and that Adobe Flash is up to date.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Getting a "403 Forbidden" error when I login ..

Hi all ... Well yesterday I did a new installation of Oracle Express Edition 11g DB, which installed fine ... I then installed OC4J, and then finally installed APEX Listener 4.1 ...
Now, when I opened 127.0.0.1:8888/apex/listenerAdmin for the very first time .. I saw a page where I was to configure the connection .. At that point I was unable to get the 'Basic' connection working (I think the error was that the Listener was unable at connect to the database), and so I closed down that page ..
Now, one day later, when I open 127.0.0.1:8888/apex/listenerAdmin, I am asked for some login details ... I don't know what to put here to login .. In fact I have not successfully logged in here even once ..
However, some clues are as follows: Before installing APEX Listener, I defined some new roles and users from the OC4J web interface ... If I try logging in through any of these, I get the '403 Forbidden' error ... Otherwise, if I enter any other random login details, the same login box keeps popping up ..
So anyone know whats the problem here ? ... I suspect that no connect between APEX Listener and the Oracle DB is yet defined, which is why these problems are occuring ...
I tried 'undeploying' APEX listener from the OC4J web interface, and then again 'deploying' it, but the exact same thing is happening ..
Can anyone help me out here ?
EDIT:
I assume maybe I'm supposed to use the APEX_PUBLIC_USER account, which I configured in oracle before installing APEX (as per intructions in Oracle installation guides), but even when I try logging in through APEX_PUBLIC_USER, my login details are not accepted ... Also, I AM able to login into Oracle Database using APEX_PUBLIC_USER, but not in APEX Listener ... And since unlike what I described above, when I enter my APEX_PUBLIC_USER login details, the same login prompt keeps reappearing, meaning the login is not recognised at all ...
Edited by: user7366837 on Sep 9, 2011 3:39 AM

Hi,
Now, when I opened 127.0.0.1:8888/apex/listenerAdmin for the very first time .. I saw a page where I was to configure the connection .. At that point I was unable to get the 'Basic' connection working (I think the error was that the >Listener was unable at connect to the database), and so I closed down that page ..I think the page you actually opened was http://127.0.0.1:8888/apex/listenerConfigure . At least, this is the page for the initial configuration. You can call it again until you've configured the database successful for the first time.
Now, one day later, when I open 127.0.0.1:8888/apex/listenerAdmin, I am asked for some login details ... I don't know what to put here to login .. In fact I have not successfully logged in here even once ..The admin page needs the credentials you've configured on your OC4J.
However, some clues are as follows: Before installing APEX Listener, I defined some new roles and users from the OC4J web interface ... If I try logging in through any of these, I get the '403 Forbidden' error ...... which you seem to have done, but probably you've some typo in there. Please note that you have to use the exact role names as described in the installation manual. A common problem is that users don't care about case sensitivity... This would fit to the symptom: You have a correct username/password combination, so the basic authentication is done, but the user is not authorized to call listenerAdmin because he doesn't have the appropriate role.
-Udo

Server Error 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied.

Hi,
I`d like to get your advice on Server Error 403 - Forbidden: Access is denied. I use to visit a webpage with no issues so far but now i getting this error each time i`m trying to get into. Any ideas in how to solve it? A step to step process will be highly appreciated.
Thanks.
PS, I`m using the latest safari 8.0.3 and OS X 10.10.2.

It's an error message from the web server, not from Safari. There's a slight chance that you might be able to clear it as follows.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Test.

I tried to access my website, but Firefox threw the error: 403 Forbidden, you don't have the permissions to view.

My website - Mousenstein.com - is under construction w/Dreamweaver + Flash.
I uploaded my files to my server.
I opened Firefox and entered the URL:
http://www.mousenstein.com
The error "403 Forbidden" appeared, and ...
You do not have the permissions to access.
I have tried to upload my site countless times, but never successfully - it is a huge headache. That said, I have never gotten the "403 Forbidden - no permissions" before.
All other failures threw the error "404, can not locate the URL "/" on this server.
Any help will be enormously appreciated.
P.S. : Are there permissions preferences on Firefox? I found one under Tools Menu, but it didn't seem to address my problem.
Thanks

I get the same thing with Firefox, IE8, Opera, and Safari. It isn't a Firefox only problem.
Are you new to that webhosting service? <br /> Have you ever uploaded web pages to that same web hosting service previously, pages that worked after an upload? <br /> Are those pages listed as ''' "public" ''' pages in your web hosts control panel?
My suggestion is to "download" your homepage and associated files & images from your PC, up to the server, using your web hosts control panel and see how that works.
Beyond that, I suspect that you might have missed an important setting in Dreanweaver for uploading to the web host's server. You might try asking about this issue at a Dreamweaver support forum.

403 Forbidden Error on directory but not on index page.

I can't seem to find the source of the 403 Forbidden error. Index page works as expected but accessing the owncoud directory throws this error. Configs below.
httpd.conf
condensed:
ServerRoot "/etc/httpd"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule headers_module modules/mod_headers.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule php5_module modules/libphp5.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
<IfModule unixd_module>
User http
Group http
</IfModule>
ServerAdmin [email protected]
<Directory />
AllowOverride none
Require all denied
</Directory>
DocumentRoot "/srv/http"
<Directory "/srv/http">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<Directory "/srv/http/owncloud">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
<Files ".ht*">
Require all denied
</Files>
ErrorLog "/var/log/httpd/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "/var/log/httpd/access_log" common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
</IfModule>
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
</IfModule>
Include conf/extra/httpd-mpm.conf
Include conf/extra/httpd-multilang-errordoc.conf
Include conf/extra/httpd-autoindex.conf
Include conf/extra/httpd-languages.conf
Include conf/extra/httpd-userdir.conf
Include conf/extra/httpd-default.conf
Include conf/vhosts/itiest.com
Include conf/extra/php5_module.conf
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
Include conf/extra/httpd-ssl.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Include conf/extra/owncloud.conf
With Comments:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
#LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule php5_module modules/libphp5.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
<Directory "/srv/http/owncloud">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
## vhosts
Include conf/vhosts/itiest.com
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Include conf/extra/owncloud.conf
##open_basedir=/srv/http/:/home/:/tmp/:/usr/share/pear/:/path/to/documentroot
$ ls -al /srv/http/
total 16876
drwxr-xr-x 4 root http 4096 Mar 6 17:51 .
drwxr-xr-x 4 root root 4096 Feb 15 13:57 ..
-rwxrwxrwx 1 root http 295 Mar 6 11:51 index.html
drwxrwxr-x 11 http http 4096 Feb 6 18:33 owncloud
-rw-r--r-- 1 root root 17200380 Feb 6 18:41 owncloud-8.0.0.tar.bz2
-rw-r--r-- 1 root root 52966 Mar 6 11:49 smallpizza.jpg
-rw-r--r-- 1 root root 20 Mar 6 16:24 test.php
# groups http
wheel http
Last edited by johan1391 (2015-03-07 04:11:12)

/var/log/httpd/owncloud-error.log
192.168.1.1 - - [06/Mar/2015:17:52:02 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
192.168.1.1 - - [06/Mar/2015:17:52:51 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
192.168.1.1 - - [06/Mar/2015:17:52:53 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
$ ls -al /usr/share/webapps/
drwxr-xr-x 5 root root 4096 Mar 6 17:12 .
drwxr-xr-x 165 root root 4096 Mar 6 21:22 ..
drwxr-xr-x 4 http http 4096 Mar 6 17:49 owncloud
drwxr-xr-x 10 root root 4096 Mar 5 02:11 phpMyAdmin
drwxr-xr-x 6 root root 4096 Sep 18 09:08 php-xcache
Also keep in mind that I've installed owncloud using the source downloaded from the website. I previously installed using the pacman, but wanted to configure it to be under a sub directory and not as my web root.
Last edited by johan1391 (2015-03-07 19:03:19)

Sharepoint web application was unable and show error 403 forbidden and 503 server errors

Hi
i some times loose connection to sharepoint site where i am working with,i was just run some powershell scripts to update
a filed value in a document library only
and it some times show in browser 403 Forbidden error and some times 503 server error
when i check in event viewer i got this below errors
adil

That particular 'error' is OK. It just means that a non-Farm Admin service account doesn't have the rights to run that sproc. Normal with best practice security in mind.
You may want to check the IIS logs to see what the
subcode for the 403/503 errors are.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

HTTP Error 403.16 - Forbidden, Your client certificate is either not trusted or is invalid.

Dear Experts,
I have tried mutual authentication with sample website as per below link:
http://itq.nl/testing-with-client-certificate-authentication-in-a-development-environment-on-iis-8-5/#comment-19427
1. Created a Root certificate, client and server certificate based on this root certificate by using Makecert command as per below link:
2. Import these certificates in Trusted Root Certification authority of both the stores (Local and Current user)
3. Created a sample website with HTML page
4.Hosted this website in IIS with HTTPS binding and selected the above server certifcate
5. Enabled "Require SSL" and selected "Require" under SSL settings of website
6. Exported the client certificate in base64 format --> Edited in notepad --> made the key into single line
7. Placed the above key under Configuration editor --> system.webServer/security/authentication/iisClientCertificateMappingAuthentication --> one to one mapping with user credentials.
8. I tried to access the website
But, I ended with below error :(
HTTP Error 403.16 - Forbidden
Your client certificate is either not trusted or is invalid.
Detailed Error Information:
Module    IIS Web Core
Notification    BeginRequest
Handler    ExtensionlessUrlHandler-Integrated-4.0
Error Code    0x800b0109
Requested URL    https://localhost:443/
Physical Path    E:\SampleRoot
Logon Method    Not yet determined
Logon User    Not yet determined
Could you please let me know what I missed here.
Note:
I am using windows8, IIS8.0.
Thanks in advance.
Regards,
M. Prasad Reddy.

Hi Prasad,
As per this case, I have been shared the corresponding details below
1.First of all,make sure that you import the certificate whether it belongs to Trusted RootCertification or not .
    If that is the case ,Goto Microsoft Management Console (MMC), open the Certificates snap-in.
    For instance, the certificate store that WCF is configured to retrieve X.509 certificates from, select the Trusted RootCertification Authoritiesfolder. Under the Trusted Root Certification Authorities folder, right-click the Certificatesfolder,
point to All Tasks, and then click Import.
2.you configured the server certificate as well, But check the client certificate whether have root certificate or not by following command?
makecert -pe -n "CN=SSLClientAuthClient"
         -eku 1.3.6.1.5.5.7.3.2 -is root -ir localmachine -in WebSSLTestRoot
         -ss my -sr currentuser -len 2048
3. Also check the Service Certificate whether its configured on the WCF Service side
4.Make sure that you followed all the steps are done correctly from your given referred link below
http://itq.nl/testing-with-client-certificate-authentication-in-a-development-environment-on-iis-8-5/#comment-19427
5.Besides, please try to set the require SSL as ignore to see if you can access the website.
If the above details cannot able to resolve this issue, please post your config file here.

Can't sign up for eprintcenter-I get this error ---Ajax submit failed: error = 403, Forbidden

Bought my 6700 printer yesterday. Set it all up, prints fine. Got the print out that tells me to go to the eprintcenter.com and "sign up and enter your printer code."
Every time I enter any information, I get this error code: Ajax submit failed: error = 403, Forbidden
I've tried entering my personal email, the eprint email--in short I've tried everything and can't register for an account so I can customize my printer email address, etc. Can some one help?

Tifmel,
I do apologize that you are having this issue. If you are still having this issue, I would suggest using a different web browser (i.e. internet explorer, google chrome, mozilla firefox). There are more that are available but those are just a few examples. I sure hope you can get everything worked out. Thanks again!!!!
Feel free to repost if you have any further questions, comments, or concerns.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Getting "Error 403--Forbidden" while accessing ADF bookmarked URL

Hi,
Here am trying to work with an ADF application to suport bookmarking.
Following are the steps I did to create a sample application.
Created a bounded task-flow (user-details.xml), which has the "Method call" as default activity along with an another view activity(userData.jsff page).
This task-flow takes an input parameter "Id" to display user details. In the method call activity user data will be initialized using the given input parameter and then the data will be displayed using userData.jsff page.
Created a view activity (details.jspx page) in adfc-config.xml file.
Marked the "details.jspx" file as bookmark-able by changing "Bookmark property to true" and given a Bookmark URL Parameter "Name is Id and Value is #{pageFlowScope.user_id}".
Dropped the bounded task-flow user-details.xml as a region into the details.jspx file.
Now the user_id which is coming as URL Parameter will be passed to user-details.xml task-flows input parameter value.
Created users.jspx page which lists all the users as home page. In the users.jspx page we'll have a link to user details page with a parameter Id.
By running the application will get users page. When I click on the user details link in the users page, the app showing user details page as expected.
Now I bookmarked the user details page. If I open the bookmarked page in the same tab, it is working fine. But when I open this bookmark in a new tab getting the "Error 403--Forbidden" response.
Bookmarked URL: localhost:7101/BookmarkTestApp-ViewController-context-root/faces/user_details?id=123&_afrWindowMode=0&_afrLoop=4884151149818&_adf.ctrl-state=35yghmx4f_18
When I click the above bookmark in another tab the url is processing for few seconds ( 2 to 3 seconds) and converts to localhost:7101/BookmarkTestApp-ViewController-context-root/ and giving 403 response. At this time it is not touching my beans at all (verified this by running the server in debug mode).
Web.xml looks like:
<?xml version = '1.0' encoding = 'windows-1252'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
         version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<context-param>
    <param-name>javax.faces.STATE_SAVING_METHOD</param-name>
    <param-value>client</param-value>
</context-param>
<context-param>
    <description>If this parameter is true, there will be an automatic check of the modification date of your JSPs, and saved state will be discarded when JSP's change. It will also automatically check if your skinning css files have changed without you having to restart the server. This makes development easier, but adds overhead. For this reason this parameter should be set to false when your application is deployed.</description>
    <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
    <param-value>false</param-value>
</context-param>
<context-param>
    <description>Whether the 'Generated by...' comment at the bottom of ADF Faces HTML pages should contain version number information.</description>
    <param-name>oracle.adf.view.rich.versionString.HIDDEN</param-name>
    <param-value>true</param-value>
</context-param>
<filter>
    <filter-name>trinidad</filter-name>
    <filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter>
    <filter-name>adfBindings</filter-name>
    <filter-class>oracle.adf.model.servlet.ADFBindingFilter</filter-class>
</filter>
<filter-mapping>
    <filter-name>trinidad</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<filter-mapping>
    <filter-name>adfBindings</filter-name>
    <servlet-name>Faces Servlet</servlet-name>
    <dispatcher>FORWARD</dispatcher>
    <dispatcher>REQUEST</dispatcher>
</filter-mapping>
<listener>
    <listener-class>oracle.adf.mbean.share.config.ADFConfigLifeCycleCallBack</listener-class>
</listener>
<servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    <load-on-startup>1</load-on-startup>
</servlet>
<servlet>
    <servlet-name>resources</servlet-name>
    <servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.GraphServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.gauge.GaugeServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>MapProxyServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.geoMap.servlet.MapProxyServlet</servlet-class>
</servlet>
<servlet>
    <servlet-name>GatewayServlet</servlet-name>
    <servlet-class>oracle.adfinternal.view.faces.bi.renderkit.graph.FlashBridgeServlet</servlet-class>
</servlet>
<servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/afr/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>BIGRAPHSERVLET</servlet-name>
    <url-pattern>/servlet/GraphServlet/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>BIGAUGESERVLET</servlet-name>
    <url-pattern>/servlet/GaugeServlet/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>MapProxyServlet</servlet-name>
    <url-pattern>/mapproxy/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>resources</servlet-name>
    <url-pattern>/bi/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
    <servlet-name>GatewayServlet</servlet-name>
    <url-pattern>/flashbridge/*</url-pattern>
</servlet-mapping>
<mime-mapping>
    <extension>swf</extension>
    <mime-type>application/x-shockwave-flash</mime-type>
</mime-mapping>
<jsp-config>
    <jsp-property-group>
      <url-pattern>*.jsff</url-pattern>
      <is-xml>true</is-xml>
    </jsp-property-group>
</jsp-config>
</web-app>
Am I missing any thing here.
Thanks in advance.
-Gopal.

https://blogs.oracle.com/DavidGiammona/entry/why_do_i_get_this_error_403_--

403 forbidden error received at Trade Partner side while sending data to XI

Hi XI Experts,
We have a B2B scenario from TP1 to another TP2 via XI in our production system. The interface is working fine and messages are flowing successfully. However, the Trade Partner HUB has decided to implement a new eCommerce Business Platform at their end. That's why they have provided AS2 ID of sender and Receiver to us to make the changes in Quality environment. I have done the same in our Quality system.
Flow: We are able to send the data successfully to the AS2 ID provided by Hubgroup. Where as we are not able to receive any data from HUB.
Last Friday, Hubgroup has received the error while sending data to XI. And in our Sender AS2 channel, we also received the following error.
a) HUB Side error:
                          Here is a copy of the MDN Message send to HUB:
                         The message you sent on "Thu, 14 Oct 2010 07:14:51 GMT" from "XXXXXXXX" to
                        "XXXXXXXXX" with subject "Integrator Message" has been received on 14 Oct
                         2010 19:14:52 GMT, but cannot be processed because message authentication
                         failed.
b) XI AS2 channel error:
                         Error type: PANIC >> Error date: 10/14/10 11:48 AM >> Description: Initiate
                         Error:com.seeburger.util.configuration.ConfigurationException: Failed to lookup report channel for failed inbound
                         message. Reason : com.seeburger.xi.config.ConfigException: No matching inbound binding (report) found for
                         FromParty: ToParty: subject:Integrator Message [10/14/10 11:48 AM]
                  I have done the following things: 1) Cache refreshed 2) Recreated the 1st part from HUB to XI. 3) Checked the Agreements and Receiver Determination and also the AS2 ID's 4) Also checked the URL in communication channel. I have created the scenario with out any mapping. I want to receive the data from HUBGROUP with out any changes. For that, I will be using a dummy interface and dummy namespace in configuration.
When we test last night, HUB side they have received 403 forbidden error message and we didn;t receive any message to XI.
Note: XI3.0 version we are using currently. We are upgrading to PI 7.11 in the next month.
Please help me on this.
Thanks & Regards,
Abdullah Shaik.
Edited by: Abdullah Shaik on Oct 20, 2010 9:06 AM

Hi Abdullah ,
here are a few things that you can check:
1) Message authentication failed
- Check the authentication certificate settings.
- Disable the u201Cauthentication requiredu201D flag, if messages without authentication are to be received.
2) Partner received HTTP Error 403 u201Cforbiddenu201D.
This error may have different reasons:
a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
b) A valid sender agreement is missing.
c) There are more then one AS2 sender agreements with the same sender AND receiver party.
d) The corresponding inbound channel is set to inactive.
regards,
Daniel

403 Forbidden Error while trying to access External SharePoint site in SP 2010

I am trying to access external Claims based SP site and trying to download the file from a doc library.
I am receiving the 403 Forbidden error when executing the code.
I am using SP 2010 and Client Object Model.
PFB the code I am running.
using (SPCOM.ClientContext clientContext = ClaimClientContext.GetAuthenticatedContext(siteURL))
if (clientContext != null)
clientContext.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials;
clientContext.Load(clientContext.Web);
clientContext.ExecuteQuery();
SPCOM.Web web = clientContext.Web;
clientContext.Load(web);
clientContext.ExecuteQuery();
using (SPCOM.FileInformation fInfo = SPCOM.File.OpenBinaryDirect(clientContext, item["FileRef"].ToString()))
string fileName = (string)item["FileRef"];
fileName = string.Concat(SaveLocation, fileName.Substring(fileName.LastIndexOf("/") + 1));
//now save it
using (System.IO.FileStream outPutFile = System.IO.File.OpenWrite(fileName))
fInfo.Stream.CopyTo(outPutFile);
fInfo.Stream.Close();
I suspect the OpenBinaryDirect method ,
I am also using Cookie based authentication I guess PFB the code for that.
public static ClientContext GetAuthenticatedContext(string targetSiteUrl)
return (GetAuthenticatedContext(targetSiteUrl, 0, 0));
/// <summary>
/// This method will return a ClientContext object with the authentication cookie set.
/// The ClientContext should be disposed of as any other IDisposable
/// </summary>
/// <param name="targetSiteUrl"></param>
/// <returns></returns>
public static ClientContext GetAuthenticatedContext(string targetSiteUrl, int popUpWidth, int popUpHeight)
CookieCollection cookies = null;
cookies = ClaimClientContext.GetAuthenticatedCookies(targetSiteUrl, popUpWidth, popUpHeight);
if (cookies == null) return null;
ClientContext context = new ClientContext(targetSiteUrl);
try
context.ExecutingWebRequest += delegate(object sender, WebRequestEventArgs e)
e.WebRequestExecutor.WebRequest.CookieContainer = new CookieContainer();
foreach (Cookie cookie in cookies)
e.WebRequestExecutor.WebRequest.CookieContainer.Add(cookie);
catch
if (context != null) context.Dispose();
throw;
return context;
If anyone has an idea of why is this happening, pls help me.
Thanks,
K.V.N.PAVAN

Hi,
Please try to add following line of code before you initialize cookie container.
e.WebRequestExecutor.WebRequest.UserAgent = “Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)”;
http://razirais.wordpress.com/2011/05/19/how-to-fix-sharepoint-online-403-forbidden-error-while-downloading-files-using-client-object-model/
Or change the following line of code
clientContext.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials;
to
clientContext.Credentials=new NetworkCredential("Username", "Passworkd", "Domain");
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Forbidden: Error 403

Similar Messages

Maybe you are looking for