Forbidden error on Testing HTP RFC : INTEGRATION_DIRECTORY_HMI

Hi All,
While testing the HTTP RFC (INTEGRATION_DIRECTORY_HMI) its throwing 403 Forbidden error.
I recheked all the entries in it and every thing looks fine.
Because of this error i guess i am not able to login to IR & ID using XISUPER (which is having all the roles ) even.
the same error follows Not Authorised.
Please help me resolve this.
Regards,
Mahesh.

Hi Uma,
-->Check the path prefix whether you had maintained or not and also maintain the proper host name and service number.
-->below is the path prefix
/dir/hmi_cache_refresh_service/ext and service number 5 + instance number + 00.
-->recheck by maintaining the above settings.
Thanks

Similar Messages

ICM_HTTP_CONNECTION_FAILED error while testing HTTP RFC in ECC 6 IDES

Hi Experts,
I have ECC 6.0 IDES system - new installation. I have created client 100 which is a copy of client 000. Being an IDES system, client 800 is automatically created.
While trying to connect this system to PI 7.1, I have created one HTTP RFC (H) in client 100 giving the details of PI system which is working perfectly fine. I have maintained the SLD details as well. But on testing the same RFC on client 800, its giving me the error as ICM_HTTP_CONNECTION_FAILED. I have created the user in PI which is maintained as well.
Even If I create a new HTTP RFC connection in client 800, its giving the same error again. User in 100 & 800 is same and both having maximum authorizations. Any opinions on why I am getting the above said error in Client 800?
Thanks & Regards,
Naresh.

Hi,
SMICM Trace file gives the following log when I am testing the HTTP Connection SAP_PID from SM59 of XYZ Client 100:
[Thr 896] IcmConnConnect: direct connect to <fully qualified hostname of PI system:50000>
[Thr 896] NiHsLGetNodeAddr: found hostname '<fully qualified hostname of PI system>' in cache
[Thr 896] NiIGetNodeAddr: hostname '<fully qualified hostname of PI system>' = addr xx.yy.zzz.lmn
[Thr 896] NiIGetServNo: servicename '50000' = port C3.50/50000
And when I am testing the same connection from SM59 of XYZ Client 800, getting the following log:
[Thr 4928] NiHsLGetNodeAddr: hostname 'proxy' not found by operating system
[Thr 4928] *** WARNING => Connection request from (55/18633/1) to host: proxy, service: 8080 failed (NIEHOST_UNKNOWN)
RM-T55, U18633, 800 ADMINISTRATOR, 19:18:49, M1, W2, SM59, 3/2 [icxxconn.c 2341]
I tried to take the restart of the system but still giving the same error.
Any suggestion???
Br,
Naresh.

SICF - HTTP 500 Error when testing SOAP RFC Service for XML load into BW

I am trying to load a XML file into BW w/o XI. So there is no source system as such. I followed the 'How to guide on loading XML to BW. I am on BW 3.5. I went to
transaction SICF>default_host/sap/bc/soap/rfc
I did a RMC and selected Test Service. A browser window open like it is trying to connect to the BW system, but I see the HTTP 500 - Internal Server Error.
What is causing this? All services are appearing as Active (grayed out). I am basically trying to put the XML file into the BW delta queue. The BW data source have been created and ther is a green entry in RSA7.
Thanks in advance.

Dinesh,
My question was more reagrding one of the steps that is not working i.e. testing for webservice. I am aware of the datasource etc.
Hence, still looking for help on what could be the causes of my error as described in the original message above.
Thanks!

Error when testing INTEGRATION_DIRECTORY_HMI rfc port

hi friends,
I have created a RFC port of type HTTP INTEGRATION_DIRECTORY_HMI it was working fine tillyesterday..
All of a sudden 2day when i am executing the proxy i got error. when i check the rfc is not working.. and giving this error ..
ICM_HTTP_CONNECTION_FAILED
Please suggest me what can i do for that..
Regards
Vijay

hi
In my case all the four rfcs
INTEGRATION_DIRECTORY_HMI
2.        SAPISU_XID
3.        LCRSAPRFC
4.        SAPSLDAPI
are working fine..
and now sproxy is not working now ..
Repository Version   UNKNOWN
when i check =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
i am geeting this error.
Regards
Vijay

Error while Testing Soap To RFC

Hi All,
While doing Soap To RFC I got the following error in testing part :
The SOAP response indicates that an error occurred:
Server Error
<detail>
        <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
com.sap.aii.af.lib.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xpi.adapters/NW07_04_REL/src/_soap_application_web_module/webm/api/com/sap/aii/adapter/soap/web/MessageServlet.java#1 $)
     at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:428)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
     at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
     at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
     at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
     at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
     at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
     at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
     at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
          ]]></text>
        </s:SystemError>
      </detail>
Please help me out to solve this.
Regards,
Nutan

1 Check your seder soap url.
2 check your host in RFC destination
use these links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79 - how to use soap adapter
RFC -> XI -> WebService - A Complete Walkthrough (Part 1) - rfc to xi to webservice(soap)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2) part-2
Invoke Webservices using SAPXI - invoke the web service
The specified item was not found. - sender rfc adapter steps
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131- [original link is broken] [original link is broken] [original link is broken] Looking for replacing SAP.NET connectors with SAP XI

Error"SYSTEM Failure" while testing the RFC in SE37 : RFC to JDBC Scenario

Hi All,
I am doing RFC to JDBC scenario. When I am testing the RFC in SE37 using the RFC destination created in SM59, I get an error "SYSTEM FAILURE".
Please suggest.
Thanks,
Shyam
Edited by: Shyam Sreepada on Dec 18, 2007 5:46 PM

Hi,
You must run RFC with RFC destination in background mode, I suggest to read following post in order to understand it better.
Syntax would be:
CALL FUNCTION func IN BACKGROUND TASK
[DESTINATION <your RFC destination>]
parameter list
http://help.sap.com/saphelp_nw04/helpdata/en/8f/53b67ad30be445b0ccc968d69bc6ff/frameset.htm
If you read it you will find that you can't test it directly from SE37, for this either you need to create dummy ABAP program or another RFC where you will call this RFC with background syntax.
Regards,
Gourav
Reward points if it helps you
Edited by: Gourav Khare on Dec 18, 2007 6:07 PM

How to duplicate return of RFC.Exception Application error to test fix

I am calling a RFC using a sync step in an BPM process. I am checking for system error and have an exception branch. However we got the below error (probably due to the ECC system not being available at that precise moment or something) which was not trapped by the exception alert handling because this comes in as an Application error and not a System error. My questions are :
1) How to handle this return of .Exception message so that the BPM raises the alert in the exception branch? I have read in other threads that we need to assign the below message structure as the Fault Message and set this under the Exceptions property of the Synchronous send step. If this is true, I am mostly interested in the below question so I can test this.
2) How to duplicate this issue? I am not sure when exactly the .Exception message is returned on a RFC call, this is not configured anywhere on the ABAP side.
<rfc:ZRFC_GET_DATA.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
        <Name>RFC_ERROR_COMMUNICATION</Name>
        <Text>CPIC-CALL: CMRCV on convId: 01667803
               LOCATION    CPIC (TCP/IP) on local host with Unicode
               ERROR       connection to partner broken
               TIME        Mon Mar 16 11:21:51 2009
               RELEASE     640
               COMPONENT   NI (network interface)
               VERSION     37
               RC          -6
               MODULE      niuxi_mt.c
               LINE        905
               DETAIL      NiPRead (xx.xx.xx.xx/yyyy, hdl 64)
               SYSTEM CALL recv
               COUNTER     2
        </Text>
        <Message>
               <ID>RFC_ERROR_COMMUNICATION</ID>
               <Number>null</Number>
        </Message>
</rfc:ZRFC_GET_DATA.Exception>

Is the error resolved means that the RFC is working fine?
I think this error due to the RFC destination set to Non-unicode which is expecting unicode option
Check the R/3 machine whether it is unicode or not try to set the RFC destination option of unicode in other way and check the error getting replicated or not
Rajesh

Test conn. SAPOSS error when opening an RFC connection SNC processing fail

Dear all,
   I configured a Saprouter in DMZ with SNC connection type to establish connection from my company to SAP and vice-versa. Also I accept connection from external company to our SAP systems. During the test in SM59 SAPOSS connection I receive the following error:
Logon     Errore di colleg.
Dettagli err.     Error when opening an RFC connection
Dettagli err.     ERROR: SNC processing failed: SncSessionInitiatorAK
Dettagli err.     LOCAZ.: SAProuter 39.1 (SP3) on 'srvsaprouter1'
Dettagli err.     DETT.: NiSncIInitHdlSecurity: sncrc=-4;0x9d9350
Dettagli err.     COMPONENT: NI (network interface)
Dettagli err.     CONTAT.: 209
Dettagli err.     MODULE: nisnc.c
Dettagli err.     RIGA: 1091
Dettagli err.     VALORE RIT.: -104
Dettagli err.     SUBRC: 0
Dettagli err.     RELEASE: 710
Dettagli err.     ORA: Fri Jul 17 11:01:22 2009
Dettagli err.     VERS.: 39
My saprouttab for SAP AG connection is the following:
#SNC-connection from and to SAP
#KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.229 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.229 3201
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.211 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.211 3600
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.209 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.210 3201
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.231 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.231 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0s.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0sc.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.242 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.242 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0t.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0tc.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.215 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.215 50100
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0p.calpeda.priv 50100
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0pc.calpeda.priv 50100
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
#P <IP-addess of a local PC> 194.39.131.34 3299
P * * *
P * 194.39.131.34 3299
D * * *
Any suggestions?
Thanks in advance.

SNC processing failed could mean lots of things... did you installed the SAPcrypto library?.. did you created the certificates correctly?...
Read SAP notes 812386 and 33135.
Regards
Juan

JCOProxy error while calling a RFC

Hi,
When i tr to call a RFC "CBIF_GLM1_BATCH_READ", i get a fatal error.The error message is:
"JCOProxy error: Problem retrieving JCO.Function object."
When i checked if i was able to connect to any of the functions other than BAPI's i got the same error.
Is there something that i need to turn on in SAP?
I am using SAP xMII 11.5.3 SR03 and SAP 4.7 Enterprise.
Any help appreciated.
Thanks,
Ram

Ram,
I tried loading this RFC, CBIF_GLM1_BATCH_READ, using my version of xMII 11.5.3 and it worked without a problem. Are you sure that this RFC was not modified in your system that causes it to not work properly? Also, when you tested the RFC in se37 did you try to run it without setting any parameters? What about using the Web DynPro interface to see if it generates the XML properly? Just a couple of things to look into, but I know it's not xMII. If you did modify the RFC you will have to restart the ServletExec service to clear the xMII JCO API cache. Hope this helps.
-Sam

403 Forbidden Error on directory but not on index page.

I can't seem to find the source of the 403 Forbidden error. Index page works as expected but accessing the owncoud directory throws this error. Configs below.
httpd.conf
condensed:
ServerRoot "/etc/httpd"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_core_module modules/mod_authz_core.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule mime_module modules/mod_mime.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule headers_module modules/mod_headers.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
LoadModule ssl_module modules/mod_ssl.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule php5_module modules/libphp5.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
<IfModule unixd_module>
User http
Group http
</IfModule>
ServerAdmin [email protected]
<Directory />
AllowOverride none
Require all denied
</Directory>
DocumentRoot "/srv/http"
<Directory "/srv/http">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<Directory "/srv/http/owncloud">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
<Files ".ht*">
Require all denied
</Files>
ErrorLog "/var/log/httpd/error_log"
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
CustomLog "/var/log/httpd/access_log" common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
</IfModule>
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
</IfModule>
Include conf/extra/httpd-mpm.conf
Include conf/extra/httpd-multilang-errordoc.conf
Include conf/extra/httpd-autoindex.conf
Include conf/extra/httpd-languages.conf
Include conf/extra/httpd-userdir.conf
Include conf/extra/httpd-default.conf
Include conf/vhosts/itiest.com
Include conf/extra/php5_module.conf
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
Include conf/extra/httpd-ssl.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
Include conf/extra/owncloud.conf
With Comments:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
#LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule php5_module modules/libphp5.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
<Directory "/srv/http/owncloud">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
## vhosts
Include conf/vhosts/itiest.com
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Include conf/extra/owncloud.conf
##open_basedir=/srv/http/:/home/:/tmp/:/usr/share/pear/:/path/to/documentroot
$ ls -al /srv/http/
total 16876
drwxr-xr-x 4 root http 4096 Mar 6 17:51 .
drwxr-xr-x 4 root root 4096 Feb 15 13:57 ..
-rwxrwxrwx 1 root http 295 Mar 6 11:51 index.html
drwxrwxr-x 11 http http 4096 Feb 6 18:33 owncloud
-rw-r--r-- 1 root root 17200380 Feb 6 18:41 owncloud-8.0.0.tar.bz2
-rw-r--r-- 1 root root 52966 Mar 6 11:49 smallpizza.jpg
-rw-r--r-- 1 root root 20 Mar 6 16:24 test.php
# groups http
wheel http
Last edited by johan1391 (2015-03-07 04:11:12)

/var/log/httpd/owncloud-error.log
192.168.1.1 - - [06/Mar/2015:17:52:02 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
192.168.1.1 - - [06/Mar/2015:17:52:51 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
192.168.1.1 - - [06/Mar/2015:17:52:53 -0800] "GET /owncloud/ HTTP/1.1" 403 1002
$ ls -al /usr/share/webapps/
drwxr-xr-x 5 root root 4096 Mar 6 17:12 .
drwxr-xr-x 165 root root 4096 Mar 6 21:22 ..
drwxr-xr-x 4 http http 4096 Mar 6 17:49 owncloud
drwxr-xr-x 10 root root 4096 Mar 5 02:11 phpMyAdmin
drwxr-xr-x 6 root root 4096 Sep 18 09:08 php-xcache
Also keep in mind that I've installed owncloud using the source downloaded from the website. I previously installed using the pacman, but wanted to configure it to be under a sub directory and not as my web root.
Last edited by johan1391 (2015-03-07 19:03:19)

"RABAX" occurs on server side error while testing asynchoronous web service

I got error while testing asynchronous web service in WS navigator. I have created asynchronouse web service using RFC. Then I configured it in SOAMANAGER. When I tested it, got error "RABAX occurs on server side". Also I got dump in ST22. It is 'UNCHAUGHT_EXCEPTION - CX_SOAP_SEQ_SCD_ERROR'.
I have tested for synchronous web service it works fine. I found a difference in both web service WSDL file for below parameters value -
commit
blocking
transaction
wsrm
I tried different way .. but no solution .. Plz suggest if someone have any idea.....Its very helpfull....

your problem:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more)

Error while testing the webservice through SOAMANAGER

Hi All,
I have created a webservice from a Function module ( RFC enabled). I am getting an error while testing the webservice from the SOAMANAGER but the function module is working fine giving proper output.
The error is
REQUEST:
POST /sap/bc/srt/rfc/sap/zws_test_cms_bp_fac/600/zws_test_cms_bp_fac/zws_test_cms_bp_fac HTTP/1.1
Host: ed1app.corp.fcc.ca:49000
Content-Type: text/xml; charset=UTF-8
Connection: close
Authorization: <value is hidden>
Content-Length: 654
SOAPAction: ""
<?xml version="1.0" encoding="UTF-8" ?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Header><sapsess:Session xmlns:sapsess="http://www.sap.com/webas/630/soap/features/session/"><enableSession>true</enableSession></sapsess:Session></SOAP-ENV:Header><SOAP-ENV:Body><ns1:ZSRAV_TEST_CMS_BP_FAC xmlns:ns1='urn:sap-com:document:sap:rfc:functions'><IT_BP_LIST><item><BP_NUMBER>9999990013</BP_NUMBER></item></IT_BP_LIST><IV_COMPANY_CODE>FCC</IV_COMPANY_CODE></ns1:ZSRAV_TEST_CMS_BP_FAC></SOAP-ENV:Body></SOAP-ENV:Envelope>
RESPONSE:
HTTP/1.1 500 CX_ST_REF_ACCESS:XSLT exception.An error occurred during serialization in the simple transformation program /1BCDWB/WSSE2B50F3FDFC9C2A94B7.Access to the table ref. node 'ZSCMS_FAC_CAG_DETAILS' outside a loop
Set-Cookie: <value is hidden>
content-type: text/xml; charset=utf-8
content-length: 0
accept: text/xml
sap-srt_id: 20100202/041112/v1.00_final_6.40/4B67E41A4BC41B7CE10000000A013104
server: SAP Web Application Server (1.0;700)
please do the needful.
Thanks in advance

Hi,
Here is a very smart tool for webservice test:
[soapUI|http://www.soapui.org/]
It works fine for me!
bg,
attila

403 forbidden error received at Trade Partner side while sending data to XI

Hi XI Experts,
We have a B2B scenario from TP1 to another TP2 via XI in our production system. The interface is working fine and messages are flowing successfully. However, the Trade Partner HUB has decided to implement a new eCommerce Business Platform at their end. That's why they have provided AS2 ID of sender and Receiver to us to make the changes in Quality environment. I have done the same in our Quality system.
Flow: We are able to send the data successfully to the AS2 ID provided by Hubgroup. Where as we are not able to receive any data from HUB.
Last Friday, Hubgroup has received the error while sending data to XI. And in our Sender AS2 channel, we also received the following error.
a) HUB Side error:
                          Here is a copy of the MDN Message send to HUB:
                         The message you sent on "Thu, 14 Oct 2010 07:14:51 GMT" from "XXXXXXXX" to
                        "XXXXXXXXX" with subject "Integrator Message" has been received on 14 Oct
                         2010 19:14:52 GMT, but cannot be processed because message authentication
                         failed.
b) XI AS2 channel error:
                         Error type: PANIC >> Error date: 10/14/10 11:48 AM >> Description: Initiate
                         Error:com.seeburger.util.configuration.ConfigurationException: Failed to lookup report channel for failed inbound
                         message. Reason : com.seeburger.xi.config.ConfigException: No matching inbound binding (report) found for
                         FromParty: ToParty: subject:Integrator Message [10/14/10 11:48 AM]
                  I have done the following things: 1) Cache refreshed 2) Recreated the 1st part from HUB to XI. 3) Checked the Agreements and Receiver Determination and also the AS2 ID's 4) Also checked the URL in communication channel. I have created the scenario with out any mapping. I want to receive the data from HUBGROUP with out any changes. For that, I will be using a dummy interface and dummy namespace in configuration.
When we test last night, HUB side they have received 403 forbidden error message and we didn;t receive any message to XI.
Note: XI3.0 version we are using currently. We are upgrading to PI 7.11 in the next month.
Please help me on this.
Thanks & Regards,
Abdullah Shaik.
Edited by: Abdullah Shaik on Oct 20, 2010 9:06 AM

Hi Abdullah ,
here are a few things that you can check:
1) Message authentication failed
- Check the authentication certificate settings.
- Disable the u201Cauthentication requiredu201D flag, if messages without authentication are to be received.
2) Partner received HTTP Error 403 u201Cforbiddenu201D.
This error may have different reasons:
a) You or your partner has entered an incorrect AS2 ID for one of the involved parties.
b) A valid sender agreement is missing.
c) There are more then one AS2 sender agreements with the same sender AND receiver party.
d) The corresponding inbound channel is set to inactive.
regards,
Daniel

Error while testing ECC and Portal-Connect to SAP gateway failed

Dear Experts,
While testing ABAP connection in Portal i am getting below error.

Dear All,
My error is rectified with below thread.
SLDCHECK: Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMIT'...
Hi,
You need to create an RFC to the SLDCHECK:
1. In your web browser, enter the URL of SAP NetWeaver Administrator using the following pattern:
http://<host>:<port>/nwa
2. Choose Configuration Management u2192 Infrastructure u2192 Jco RFC Provider.
3. Choose Create.
4. Enter the connection and transport parameters as required.
Field
Description
Program ID
We recommend that you use the following pattern: SLDAPI_<SAPSID>, where SAPSID is the system identifier of the AS Java system.
Gateway host
Gateway service
If your AS Java is an add-on installation to an ABAP system, use the gateway of the ABAP system. You can look up the gateway parameters of an ABAP system using transaction SMGW.
If your AS Java is a standalone installation, we recommend using a gateway on the Central Services Instance host. As of SAP NetWeaver 7.1, usage type AS Java that comprises SLD also contains an SAP RFC Gateway.
Server Count (1..20)
Enter 3.
5. Choose Next.
6. Enter logon data to the ABAP repository. You can either use an existing RFC destination from SAP NetWeaver Administrator u2192 Configuration Management u2192 Security u2192 Destinations or you specify the ABAP repository explicitly. The destination should point preferably to an AS ABAP close to SLD. If SLD is running on an AS Java standalone installation, the calling AS ABAP can be used instead. We recommend to create and use an RFC destination instead of explicitly specifying the connect parameters here. In both cases, the following parameters are required
Field
Description
System Landscape Directory 15
User Manual 03.04.2008
Application Server Host
System Number
Client
Language
User
Password
Enter the logon data for the AS ABAP system. You must specify an existing user with appropriate authorizations for RFC.
If you are running a system with both usage types AS ABAP and AS Java, use the logon data for this system.
If your AS Java is a standalone installation, use the logon data for the calling ABAP system.
7. Choose Next.
8. Leave the default values in the next steps.
9. Create the Jco RFC destination by choosing Finish.
Result
The Jco RFC destination creates a number of u201CServer Countu201D RFC server threads on your AS Java. These RFC servers register at the RFC Gateway specified. You may configure multiple ABAP systems to connect to these RFC servers. In this case, the Server Count should be increased when TIME_OUT exceptions are observed.
Creating an RFC Destination for the SLD ABAP API on the AS ABAP Side
Use
If you want to configure an ABAP application to access data in the SLD through the SLD ABAP API, you have to create an RFC destination on the ABAP system side.
Prerequisites
An RFC destination for the SLD ABAP API is created on the AS Java side.
Procedure
1. Call transaction SM59.
2. Select TCP/IP connections and choose Create.
3. In the RFC Destination field, enter SAPSLDAPI.
4. On the Technical Settings tab page, select the Registered Server Program indicator.
5. In the Program ID field, enter the same program ID as the one you entered when you created an RFC destination for the SLD ABAP API on the AS Java side. We recommend that you use the following pattern: SLDAPI_<SAPSID>, where SAPSID is the system identifier of the AS Java system.
6. Choose MDMP & Unicode and select the Unicode indicator.
7. Choose Save.
8. Test the RFC destination by choosing Connection Test.
If the display shows the response times, you have configured the RFC destination correctly.

Error while testing Data Service

Hi Experts,
               I got error while testing the Data service of <b>Salesorder Createfromdat2</b>, in this when iam entering the Doc_Type as ZORD it is showing " This Doc type is not defined, what to do with this. Where as when i tried with WebDynPro its not showing any error with that perticular field.
Plz help me out wether to change some configurations....
Thanks @ points,
Kishore
Message was edited by:
        kishore kumar

HI kishore
   This is the problem with ur RFC/data inside table. in webdynpro we r using adaptive RFC model, if RFC is giving output while executing, webdynpro will also do the same. but in VC it will parse each field according to the meta data definition, If it is not matching it will give error.
Regards
Pradeep P N

Forbidden error on Testing HTP RFC : INTEGRATION_DIRECTORY_HMI

Similar Messages

Maybe you are looking for