Force changing sales order status to completed

Dear Expert,
Is it possible to use a function module or execute a report to force change the status of a sales order to completed?
Setting reason for rejection is an option; however, I would like to know if it's possible via an FM or a report.
Sincerely,
Vitthavat A.

Lakshmipathi wrote:
Through MASS itself, you can select the Reason for Rejection and change the status of sale orders in bulk.
>
>
> G. Lakshmipathi
You meant I will need to change the status indirectly by changing reason for rejection, right?
Can I change the status directly in MASS without changing the reason for jection?
Vitthavat A.

Similar Messages

  • Sales order status showing Completed, after I do partial delivery

    Dear All, Good morning
    I'm Creating an order for 5 quantities and creating a delivery for 2 Qty',
    my problem here is the sales order status is showing complete and I'm unable to create a delivery for the remaining Qty.
    I've checked with the Copy controls for OR - LR(T.code: VTLA) , for your reference I'm showing it below,
    FOR HEADER
    Target delivery type    LF     Outbound Delivery
    From SalesDoc Type      OR     Standard Order
    Order requirements     001    Header
    Combination requirmt   051    Combination
    Header Data            001    Header
    Header Data Ext. Sys   0
    Handling Units         000
    Copy Item Number is not CHECKED
    FOR ITEM
    Target delivery type    LF     Outbound Delivery
    From SalesDoc Type      OR     Standard Order
    Order requirements     001    Header
    Combination requirmt   051    Combination
    Header Data            001    Header
    Header Data Ext. Sys   0
    Handling Units         000
    Update Document Flow is CHECKED & Positive/Negative Qty
    Please its urgent.
    Thanks & Regards

    hello, friend.
    in addition to what the others have said, please check your customer master, particularly in the Sales Area Data > Shipping tab.  look at the partial deliveries.  there may have been settings that tell the system if a delivery has been created with reference to the sales order, the order will be completed even if the quantity is only partially delivered.  if the entry in the 'partial delivery per item' field is 'B', then this will explain your situation.
    this can also be manually set in the sales order, so you have to take a look at the order as well, at item level.
    regards.

  • Manually change sales order status

    Hi All friends
    I have one requirement where i need to manually change the sales order overall process status "completely process"  VBUK-GBTSK.
    Please suggest me how can i achieve this.
    Regards
    Shambhu

    Dear Shanmbhuda ,
    you have to Configure the Rejection reasons in the IMG:
    T-code: OVAG
    Rejection reason for the Item Level in Sapro
    Assign the following Tick to
    NRP: Not Relavent fro Printing
    OLI :Cost Line Item Open Again
    BIC not relavent for billing
    Statistical Valus :
    Assign the Tick in the OLI and Statistical Values BIC
    your overall staus will be completed.
    regards,
    Amlan Sarkar

  • Middleware: Change sales order status

    Hi,
    I am trying to change the status of a sales order within the middleware.
    For manupulation of the data I use a custom implementation
    of 'CRM_DATAEXCHG_BADI' and there the interface 'CRM_DATAEXCH_R3D_MBDOC_FILL'.
    Is interface is called after the MBDOC is filled.
    So now I like to change the status of the sales order in that BDOC. I use the table 'STATUS' within the structure ct_bus_trans_msg. This is working fine as long as there is just one action on side of R3, e.g. created delivery for order.
    However, when I create a delivery and PGI in R3, I am not able to set the status for my sales order. Worst I do not even see where the status is set by the R3.
    Thanks for any help on this topic,
    Tim

    Tim, I am wondering what is the origin of the sales order? I assume the order was created in CRM and PGI'd in ECC. If so which version of CRM are you running since tthere can be an issue with the changebility of the order in a different system. Tiest.

  • User exit to change sales order status once a delivery is created

    Hello Experts,
    I want to update the Overall status(VBSTT-GBSTA_BEZ) of a sales order to completed once a delivery is created for that order.Please guide me how can i do this and also the user exit or badi where i can write the code for this.
    Thanks in advance.
    Regards,
    Koustubh

    Got the complet guidance in new thread.
    User Exit to update Sales order text (Terms of delivery) on saving it
    Thanks

  • Sales order status shows complete

    Hi Experts,
    I found a issue in Sales Cycle that is..
    Sales order overall status shows complete but actually only some material has been delivered and so many materials are pending. Can any one help Why it is happening?

    Hi,
    check, if there are allready delivery for the "pending material".
    The sales order is only checking if there are deliveries - not it the PGI is done.
    Regards
    Manuel

  • Changing sales order status in ECC and CRM simultaneously

    I am creating a sales order in CRM 2007 system, at the same time i am creating a trading contract for the same order in ECC system. My requirement is, when i change the status of order in ECC, it should reflect back in the CRM system. Please give some help in this issue. Is there any BAPI/BADI which can be helpfull to solve this.

    hi,
    If u found out the bapi/badi for ur requirement,please do reply bcoz i got the same requirement.
    Thanks in advance,
    Srinivas.
    Edited by: srinivasa reddy mallidi on Feb 3, 2009 3:04 PM
    Edited by: srinivasa reddy mallidi on Feb 3, 2009 3:04 PM

  • Changing Sales order Status (Z-Status Profile) without manual intervention

    Hi All,
    I have a  Z-Status Profile created for Sales Order. There are about 6 statuses in this profile. An enhancement requires change of particularly two statuses only by the user exit after certain calcualtions and not manually by any user in any case.
    Can anyone suggest a way to handle this case? If authorization object should be created then based on which fields should this authorization object be created? If not, this there any other way to handle this.
    Thanks,
    Sophia Xavier

    Hi Pete,
    Thanks for your reply. The usage of the User Exit and the Function Module is quite clear. My question is how do we control the change of two statuses only by the User Exit without any manual intervention, i.e., no user should be able to change these two statuses manually,only the program should be able to do this..How do we handle this scenario?
    Thanks,
    Sophia Xavier

  • Set sales order status is complete after Billing document created

    Hi experts:
    Current
    Complete rule of item category 'TAN' is space.
    The Status will be set complete after Delivery  document is created.
    I want to change the rule to
    the status will be set complete after billing document is created.
    Han can I do it ??

    Go to VOV7, select the item category and execute.  There maintain "B" against the field "Completion Rule"
    thanks
    G. Lakshmipathi

  • Sales Order Status "Being Processed"  after completion for Free Goods Sales

    Hello All,
    This problem is related to Free Goods Sales which is as follows.
    The process-flow for free goods sales is first we raise a sales order, then we do outbound delivery for the sales order and then finally PGI of the goods.We don't raise any invoice and the Free Goods Challan is issued to the customers by running a report.
    The document flow at the end always show the Sales Order  status as " Being Processed" and Outbound Delivery & PGI as "Completed".I want the system to show the Sales Order status as " Completed" and not " Being Processed".How to do that?
    Please suggest some solutions.
    Thanks & Regards
    Priyanka Mitra

    Hi Raja,
    Thanks a lot for your prompt reply and suggestion.
    Now we are able to get the Completed status in Document Flow.
    Thanks & Regards
    Priyanka Mitra
    P.S. -  I would request you to go through another problem which we are facing in Shipment , please go through this and suggest some solution regarding it if possible.
    I have already posted this problem in a separate thread few days back but am yet to receive any fruitful suggestion.
    The problem is regarding Shipment Cost Calculation while doing STO which is as follows -
    In our scenario the Shipment cost calculation is done on two basis -
    1) Absolute Rate / Flat Rate Wise - For example for transporting of goods from Kolkata Depot to Delhi Depot is Rs. 20,000 fixed.
    2)) Gross Weight Wise - where the weight unit is kg and rate for example is Rs. 4 / Kg. So for 10 Kg the shipment cost will be Rs. 40.
    Now I want the system to calculate the shipment cost on Rate / Carton Wise i.e. How will I be able to calculate the shipment cost of 100 cartons if the rate is Rs. 100/ Carton.
    How to configure this ? Please help in this regard.

  • How to convert open sales order status to close

    Hi Guru,
    There are lot of sales order in Open status and Overall status is Being processed, i have given the reasoning on Header and Line items and checked the Complete status. I also blocked the billing & delivery by using t-code VA02. when I see the open sales order in VA05 then these sales order exists in VA05 with staus A - Open.
    Please guide / help me that what i have to do to close these order or convert open sales order status in complete or short close.
    Best Regards,

    Thanx Experts,
    It is working, But it is not working in those sales order which order qty, delivery qty, confirm qty = 0, kindly let me know what is the way out to remove such sales order from the open sales order list. I try to delete but SAP says "This document cannot be deleted" Pl. help...
    Thanx for solutions.
    Regards,
    Edited by: VijayAngrish on May 18, 2010 7:48 AM

  • Sales order status with down payment requests.

    Due to our requeriments, all the invoices created from a sales order has down payment request as billing category.
    The problem is that the sales order status continues as "Being processed" instead of completed.
    Is there any customising that makes the sales order status as completed when the down payment request is created for all the sales order value?
    Thanks in advance.

    Hello,
      this is the correct behaviour of the system: you have an item of 100; in the billing plan if you want to manage downpayment you will have, let's say two items:
    10 for the downpayment 
    100 for the final invoice.
    The system proposes the amount you defined for the downpayment and the total amount for the final invoice.
    Then you will have to bill the downpayment invoice, release it into accounting and clear it. If you will do this steps correctly, when you create the final invoice the system will show you:
    invoice amount 100
    advance payment -10
    net value = 90.
    Hope to be useful..
    Best regards,
    Andrea

  • Sale Order Status Change after delivery of materials from projects

    have ETO sccenario which consists of all modules such as SD,PS.PP etc. Materials will be procured from external vendors & manufactured inhouse through project systems. After delivery of materials from project systems, billing & invoicing will be done at sales level.
    On delivery of materials from projects, sale order status remain open. Request you to look into the matter & suggest about status change of sale order after delivery / billing.
    Regards,
    Ranjan

    Hi,
    In sale order, WBSE is assigned. Delivery of materials are through cns0. then subsequently picking / packing / billing will happen at sales level. Billing is of delivery related. Please suggest to fix the issue.
    Thanks & Regards,
    Biplab Ranjan

  • Sale order status not getting completed

    Hi Friends,
    I had sales order with milestone billing for which I completed billing, even though sale order status is showing as being processed. The same way with periodic billing also.
    Kindly suggest.
    Kumar

    Dear all,
    I have cleared my actual issue. But the below doubt was regarding the standard SAP.
    Hi All,
    Thank you for your answers. First point is that I hope completion rule is only for quotation and contracts but not for normal sales orders. Second point is that I am using TAO item category which tells order related billing with billing plan. This means there was no delivery, then why schedule line CP (MRP) was assigned to TAO in standard? This is the problem for me. As the schedule line is MRP the system is not completing the status of the sale order even I have completed total quantity and value also. Can anyone tell me why this was assigned like this in statandard?
    Kumar

  • Sales order status to show as Complete only after PGI

    Hello
    I have one requirement. Now currently in sales order status of the order is showing complete once the item being delivered.
    But our requirement is that, the status of the order should be shown complete only when PGI is done not after delivery.
    I would like to know if any exit or any other program will help us in finding this solution
    Thanks in advance
    Naveen

    Dear Naveen,
    Sales order status depend on Item Category completion rule, please check on VOV7 for your sales order item category. In standard SAP, below rule can we define with item category:
    Not relevant for completion
    A
    Item is completed with the first reference
    B
    Item is completed after full quantity has been referenced
    C
    Item is completed after the target qty is fully referenced
    D
    Item is referenced via contract release
    E
    Item is completed after full target value is referenced
    Hope it will helpful for you.
    Regards,
    Shatrughan Singh

Maybe you are looking for

  • Error while creating a Solaris Resource

    I got the following error while creating the following solaris resource: Test connection failed for resource(s): Solaris: Script failed waiting for "ASSWORD:" in response "_,)#+(:" ==> com.waveset.util.WavesetException: Script processor timed out wit

  • IPhone no longer recognized by PC, won't show up in itunes

    I've had my iPhone for months and it always worked and synced perfectly with my HP computer running XP. Last night out of the blue when I plugged it into the usb 2.0 port I always use, it stopped recognizing it. It gives me a message that there's an

  • CS 1 upgrade question

    Hello I have the original CS1 (not CS2) and will be buying a new macbook pro. I have read a lot of threads on this but I can't seem to get a definitive answer to my questions. 1. Will CS1 install on my new macbook pro? 2. If it does install will it w

  • How to attach report in oracle apps AR module

    i m new in Oracle Apps 12. please any body tell me how to attact new customised report in EBS 12.

  • 2 h:messages tags in a page

    Hi All, How can i set or show a message only to a particular <h:messages> tag in a page that has 2 <h:messages> tags? Is this possible? Thanks, Eson.