Force client update from adobe server

Hi all,
I just created ad Update server with "Adobe Update Server Setup Tool" on 2008 R2 and it works perfectly.
I want to know if there is a way to force the installation of the updates on clients (mac/pc) and if there is a way to install updates by non-admin users..
thanks in advance for your support!
raffo

Similar Messages

How do you configure a client to update from the server

I found the information on how to point clients to a software update server but the problem I have is the URL.
The example is http://su.example.com:8088/index.sucatalog
I don't have a URL as far as I know and if I did, is the default port 8088 or where can I change or check that?
And where is a list of the catalog file for the specific versions of OS X?
Basically I have 8 Macs all running Yosemite except for one running 10.8.5. Instead of all the machines hitting the internet for updates, I'd like just my server to down the updates and then all clients update from the server.
If there is better instructions on how to do this, please point the way.
TIA
Chris

John Lockwood wrote:
This does mean you need to buy a DNS load balancer to do this. The Mac itself cannot.
FWIW, OS X Server is capable of performing round-robin access with the inbound traffic using multiple IP addresses for a single host name. The addresses are each of the software update servers in your server pool.
This'll toss errors for some translations when one of the servers is down — you can tweak the definition if one of the servers is going to be offline for a while — but some of the updates will get through.
Set the DNS TTL fairly short — probably somewhere between a few minutes and an hour — to allow the DNS translations to be changed fairly quickly, if your software update servers are prone to outages.

My workstation won't see Software Updates from my server

Hi guys,
I'm toying around with Software Update Services. I've setup the Software Update service on my Xserve, and I've downloaded the update packages & made them available for clients to download.
The trouble is, when I run Software Update on my workstation, it still seems to connect to Apple for updates; instead of the workgroup server. How do I troubleshoot this? If I look on the Xserve, there is nothing in the Server Admin logs for Software Update that relate to my workstation failing to connect. In Workgroup Manager, I have the Preferences set for my workstation where "Software Update server to use" is set to "http://bugs:8088". With Safari on my workstation, I can open http://bugs:8088 and see the directories where the packages are stored... yet Software Update ignores them!
The Xserve is running OS X Server 10.4.2 and my workstation runs OS X 10.4.5. Any suggestions? Thanks!
Mac OS X (10.4.5)

I to am having the problem with my test client not getting updates from the server. I am the lone IT man in this company so I've had to work slowly to get my Mac server online. I am following the System Imaging and Software Update Administration guide. It said to enable the service, enable and mirror the updates I wanted. For an unmanaged client (like this one) do:
defaults write com.apple.SoftwareUpdate CatalogURL http://ifire.local:8088/. Each time software update runs I get no new software available. I used terminal with softwareupdate -l and followed the process. I get 'Unable to use product xxx' on everything and the line that followes is 'Failed to load distribution file xxx.' I know there is one update for me, Quicktime.
!!HELP!!
G5 Mac OS X (10.4.7)

How to install html5 and css3 in my DW cs6 i cant download updates from adobe :/

how to install html5 and css3 in my DW cs6 i cant download updates from adobe :/

What do you mean you can't write HTML5 code? Are you working within an HTML5 doc type?
To make HTML5 your default doc type, go to Edit > Preferences > New Document. Click on screenshots below.
To create a new page, go to File > New > Blank page > HTML. Select none from the 3rd column. Select HTML5 doc type. Hit Create button.
Nancy O.

I can not install the update from adobe media encoder

I can not install the update from adobe media encoder for MPeg 2 DVD, it will not install error code U44M2P28

Would you have any screenshots, filename and the exact URL that you used to download Flash Player. Can you also, please provide your system configuration to help us identify the issue.
Thanks,
Anamika
Adobe Team

How do I update from adobe XI standrad to XI Pro?

how do I update from adobe XI standrad to XI Pro?

Hi ianp94190900,
In order to update from Adobe Acrobat XI Standard to Adobe Acrobat XI Pro you will have to purchase the upgrade.
You can download Adobe Acrobat XI Pro. directly using this link Download Acrobat products | Standard, Pro | DC, XI, X & then serialize it using your Adobe ID.
In case if you experience any issue please let us know, we will be happy to help you.
Regards,
Aadesh

Clients cannot update from WSUS server - error 8024400E

Alright, so I'm troubleshooting our WSUS server and seem to be stuck. I am running WSUS 3.2.7600.226 on Server 2003. The client I have been using for testing is Windows 7 x64, but we have this issue on all clients (XP, 7 x86, and 7 x64). I started
with an error of 800B0001 and after googling installed KB2720211 to fix it. Now I am getting error 8024400E on clients when I attempt to update. I followed a technet walkthrough and verified that my WSUS settings are all correct (at least regarding iis,
registry, gpo settings, and file system permissions). I am able to download CAB files from the WSUS server by going to the proper address in a browser. Here is a snippet from my WindowsUpdate log on my client:
2013-12-20 10:27:29:784 972 23ac AU #############
2013-12-20 10:27:29:784 972 23ac AU ## START ## AU: Search for updates
2013-12-20 10:27:29:784 972 23ac AU #########
2013-12-20 10:27:29:785 972 23ac AU <<## SUBMITTED ## AU: Search for updates [CallId = {749E5CD5-F4DE-48FC-A691-3610EF622CE3}]
2013-12-20 10:27:29:785 972 2bcc Agent *************
2013-12-20 10:27:29:785 972 2bcc Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-12-20 10:27:29:785 972 2bcc Agent *********
2013-12-20 10:27:29:785 972 2bcc Agent * Online = Yes; Ignore download priority = No
2013-12-20 10:27:29:785 972 2bcc Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation'
and RebootRequired=1"
2013-12-20 10:27:29:785 972 2bcc Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-12-20 10:27:29:785 972 2bcc Agent * Search Scope = {Machine}
2013-12-20 10:27:29:785 972 2bcc Setup Checking for agent SelfUpdate
2013-12-20 10:27:29:785 972 2bcc Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2013-12-20 10:27:29:785 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-12-20 10:27:29:789 972 2bcc Misc Microsoft signed: Yes
2013-12-20 10:27:29:794 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-12-20 10:27:29:797 972 2bcc Misc Microsoft signed: Yes
2013-12-20 10:27:29:799 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-12-20 10:27:29:803 972 2bcc Misc Microsoft signed: Yes
2013-12-20 10:27:29:808 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-12-20 10:27:29:812 972 2bcc Misc Microsoft signed: Yes
2013-12-20 10:27:29:821 972 2bcc Setup Determining whether a new setup handler needs to be downloaded
2013-12-20 10:27:29:821 972 2bcc Setup SelfUpdate handler is not found. It will be downloaded
2013-12-20 10:27:29:821 972 2bcc Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-12-20 10:27:29:823 972 2bcc Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-12-20 10:27:29:823 972 2bcc Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-12-20 10:27:29:835 972 2bcc Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-12-20 10:27:29:835 972 2bcc Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-12-20 10:27:29:852 972 2bcc Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-12-20 10:27:29:852 972 2bcc Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-12-20 10:27:29:884 972 2bcc PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-12-20 10:27:29:884 972 2bcc PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsusservername/ClientWebService/client.asmx
2013-12-20 10:27:29:896 972 2bcc PT WARNING: Cached cookie has expired or new PID is available
2013-12-20 10:27:29:896 972 2bcc PT Initializing simple targeting cookie, clientId = 488f3922-1a4e-4921-b015-25957eeb6500, target group = http://wsusservername, DNS name = mycomputer.domain.local
2013-12-20 10:27:29:896 972 2bcc PT Server URL = http://wsusservername/SimpleAuthWebService/SimpleAuth.asmx
2013-12-20 10:27:29:902 972 2bcc PT WARNING: GetAuthorizationCookie failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200
2013-12-20 10:27:29:902 972 2bcc PT WARNING: SOAP Fault: 0x000190
2013-12-20 10:27:29:902 972 2bcc PT WARNING: faultstring:Fault occurred
2013-12-20 10:27:29:902 972 2bcc PT WARNING: ErrorCode:InternalServerError(5)
2013-12-20 10:27:29:902 972 2bcc PT WARNING: Message:(null)
2013-12-20 10:27:29:902 972 2bcc PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/SimpleAuthWebService/GetAuthorizationCookie";
2013-12-20 10:27:29:902 972 2bcc PT WARNING: ID:9d989bf6-04e3-44a9-8ffd-f20bb997b3f0
2013-12-20 10:27:29:902 972 2bcc PT WARNING: Failed to initialize Simple Targeting Cookie: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc PT WARNING: PopulateAuthCookies failed: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc PT WARNING: RefreshCookie failed: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc PT WARNING: RefreshPTState failed: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc PT WARNING: Sync of Updates: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc PT WARNING: SyncServerUpdatesInternal failed: 0x8024400e
2013-12-20 10:27:29:902 972 2bcc Agent * WARNING: Failed to synchronize, error = 0x8024400E
2013-12-20 10:27:29:902 972 2bcc Agent * WARNING: Exit code = 0x8024400E
2013-12-20 10:27:29:902 972 2bcc Agent *********
2013-12-20 10:27:29:902 972 2bcc Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-12-20 10:27:29:902 972 2bcc Agent *************
2013-12-20 10:27:29:902 972 2bcc Agent WARNING: WU client failed Searching for update with error 0x8024400e
2013-12-20 10:27:29:902 972 1bc8 AU >>## RESUMED ## AU: Search for updates [CallId = {749E5CD5-F4DE-48FC-A691-3610EF622CE3}]
2013-12-20 10:27:29:902 972 1bc8 AU # WARNING: Search callback failed, result = 0x8024400E
2013-12-20 10:27:29:902 972 1bc8 AU # WARNING: Failed to find updates with error code 8024400E
2013-12-20 10:27:29:902 972 1bc8 AU #########
2013-12-20 10:27:29:902 972 1bc8 AU ## END ## AU: Search for updates [CallId = {749E5CD5-F4DE-48FC-A691-3610EF622CE3}]
2013-12-20 10:27:29:902 972 1bc8 AU #############
2013-12-20 10:27:29:903 972 1bc8 AU Successfully wrote event for AU health state:0
2013-12-20 10:27:29:903 972 1bc8 AU AU setting next detection timeout to 2013-12-20 21:27:29
2013-12-20 10:27:29:903 972 1bc8 AU Setting AU scheduled install time to 2013-12-21 10:00:00
2013-12-20 10:27:29:903 972 1bc8 AU Successfully wrote event for AU health state:0
2013-12-20 10:27:29:904 972 1bc8 AU Successfully wrote event for AU health state:0
2013-12-20 10:27:34:498 972 2bcc Report REPORT EVENT: {2519DC64-E7F9-499B-A2F8-B58DA4A0C08A} 2013-12-20 10:27:29:902-0600 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed
to detect with error 0x8024400e.
2013-12-20 10:27:34:502 972 2bcc Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2013-12-20 10:27:34:502 972 2bcc Report WER Report sent: 7.6.7600.256 0x8024400e 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2013-12-20 10:27:34:502 972 2bcc Report CWERReporter finishing event handling. (00000000)
I focused in on "GetAuthorizationCookie failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200" and did some googling which all points at Microsoft Office 2003 SP1 update as being the culprit, and I followed
the instructions on a technet site to disable the update and am still getting the same error. I'm stumped at this point, and I thought I would post here in the hope that someone can help me before I end up just wiping it out and reinstalling (which I'm worried
won't even solve it).

I focused in on "GetAuthorizationCookie failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200" and did some googling which all points at Microsoft Office 2003 SP1 update as being the culprit, and I followed
the instructions on a technet site to disable the update and am still getting the same error.
While you're definitely on the right track, the Office2003SP1 update really has not been an issue since WSUS Service Pack 2 was released in October 2009 (and really, the Office2003SP1 update that was the cause of this was replaced long before that even,
so you probably don't even have the defective update on your server).
However, the error is generally associated with the presence of defective update(s) on the WSUS server, so the first thing to do is address any potential issues caused by a failed install of KB2720211.
If the error still persists after verifying that all other aspects of the server are fully operational, review the list of not-Declined updates on your WSUS server and make sure that:
All Expired updates are Declined (and then run the Server Cleanup Wizard and let it delete the expired updates).
All approvals for older revisions have been removed (and then run the Server Cleanup Wizard and let it delete the older revisions).
All approvals for superseded updates have been removed. (And then, when they report as 100% Not Applicable, decline them, and then run the Server Cleanup Wizard so that it can delete the files associated with those updates).
Once all of the potentially problematic updates have been removed from the view of the Windows Update Agent, and if this error then persists, we can evaluate it from a more focused perspective.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Issue in material master update from presentation server using BAPI....

Hi Guru's...
i am trying to change the material master from presentation server (desktop flat file)
using BAPI(BAPI_MATERIAL_SAVEDATA) ....
while executing my program i am getting the message like material had changed...
but while in mm02 i am un able to fine the updates...
please find below program logic and correct me if any mistakes....
thanks in advance...
*& Report ZAREPAS36
REPORT zarepas36.
DATA : gs_bapimathead             TYPE bapimathead,
       gs_clientdata              TYPE bapi_mara,
       gs_clientdatax             TYPE bapi_marax.
TYPES : BEGIN OF gty_itab1,
        matnr(18),
        matkl(9),
        spart(2),
        ntgew(13),
        gewei(3),
        meins(3),
        END OF gty_itab1.
DATA : gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
       gwa_itab1 TYPE gty_itab1.
TYPES: BEGIN OF gty_itab2,
       abc(132),
       END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
      gwa_itab2 TYPE gty_itab2.
flat file at selection screen
PARAMETERS: p_files TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = p_files
    filetype = 'ASC'
CHANGING
    data_tab = gt_itab2
EXCEPTIONS
    OTHERS   = 8.
LOOP AT gt_itab2 INTO gwa_itab2.
IF gwa_itab2-abc(1) = 'S'.
    gwa_itab1 = gwa_itab2-abc(132).
    APPEND gwa_itab1 TO gt_itab1.
ENDIF.
ENDLOOP.
loop at gt_itab1 into gwa_itab1.
*Material
gs_bapimathead-material    = gwa_itab1-matnr.
*Material details at client data
*material group.
gs_clientdata-matl_group = gwa_itab1-matkl.
gs_clientdatax-matl_group = 'X'.
*Division
gs_clientdata-division = gwa_itab1-spart.
gs_clientdatax-division = 'X'.
*Net Weight
gs_clientdata-net_weight = gwa_itab1-ntgew.
gs_clientdatax-net_weight = 'X'.
*Unit of Weight
gs_clientdata-unit_of_wt = gwa_itab1-gewei.
gs_clientdatax-unit_of_wt = 'X'.
*Base Unit of Measure
gs_clientdata-base_uom = gwa_itab1-meins.
gs_clientdatax-base_uom = 'X'.
endloop.
*calling BAPI for making changes in material and saving thru BAPI.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    headdata    = gs_bapimathead
    clientdata = gs_clientdata
    clientdatax = gs_clientdatax.
IF sy-subrc NE 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error occured while changing material'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'material',gs_bapimathead-material,'changed'.
ENDIF.

hi hello Guru's
i resolved the issuee..
pleaso go thru the below proram logic for your reference..........
*& Report ZAREPAS36
REPORT zarepas36.
DATA : gs_bapimathead             TYPE bapimathead,
       gs_clientdata              TYPE bapi_mara,
       gs_clientdatax             TYPE bapi_marax.
TYPES : BEGIN OF gty_itab1,
        matnr(18),
        matkl(9),
        spart(2),
        ntgew(13),
        gewei(3),
        meins(3),
        END OF gty_itab1.
DATA : gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
       gwa_itab1 TYPE gty_itab1.
TYPES: BEGIN OF gty_itab2,
       abc(132),
       END OF gty_itab2.
DATA: gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
      gwa_itab2 TYPE gty_itab2.
DATA:ls_return         TYPE bapiret2,
     lt_bapiret2       TYPE standard table of bapiret2.
flat file at selection screen
PARAMETERS: p_files TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
    filename = p_files
    filetype = 'ASC'
CHANGING
    data_tab = gt_itab2
EXCEPTIONS
    OTHERS   = 8.
LOOP AT gt_itab2 INTO gwa_itab2.
IF gwa_itab2-abc(1) = 'S'.
    gwa_itab1 = gwa_itab2-abc(132).
    APPEND gwa_itab1 TO gt_itab1.
ENDIF.
ENDLOOP.
LOOP AT gt_itab1 INTO gwa_itab1.
*Material
gs_bapimathead-material    = gwa_itab1-matnr.
*Material details at client data
*material group.
gs_clientdata-matl_group = gwa_itab1-matkl.
gs_clientdatax-matl_group = 'X'.
*Division
gs_clientdata-division = gwa_itab1-spart.
gs_clientdatax-division = 'X'.
*Net Weight
gs_clientdata-net_weight = gwa_itab1-ntgew.
gs_clientdatax-net_weight = 'X'.
*Unit of Weight
gs_clientdata-unit_of_wt = gwa_itab1-gewei.
gs_clientdatax-unit_of_wt = 'X'.
*Base Unit of Measure
gs_clientdata-base_uom = gwa_itab1-meins.
gs_clientdatax-base_uom = 'X'.
ENDLOOP.
*calling BAPI for making changes in material and saving thru BAPI.
CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
EXPORTING
    headdata    = gs_bapimathead
    clientdata = gs_clientdata
    clientdatax = gs_clientdatax
IMPORTING
    return      = ls_return.
LOOP AT lt_bapiret2 INTO ls_return.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
WRITE: / 'Error occured while changing material'.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'material',gs_bapimathead-material,'changed'.
ENDIF.

Windows 8.1 will not get Forefront Client Updates from WSUS

Recently I noticed that my Windows 8.1 clients were not getting updates from WSUS 3.2. After some searching I found it was an issue with HTTPS and the solution was to disable HTTPS or enable TLS. So I enabled TLS on the Server 2008 R2 WSUS server
and that fixed the issue with my 8.1 clients not getting updates except for Forefront Endpoint Protection 2010. My SCCM server deploys the client fine but it is version 2.1 and normally the client and definition updates come from WSUS with the
latest client version being 4.5. However, my Windows 8.1 machines will not get the client updates even though they are automatically approved for all machines.
I am just wondering what else I can check or change to make sure my Windows 8.1 clients get the Forefront client updates as they should?? I am wondering if I manually install the 4.1 client update if it will take the client updates after that.
I only have about eight Windows 8.1 machines so if I have to do that by hand for now then I will and I think my organization will be moving to Server 2012 and SCCM 2012 this summer sometime.

I reread your post and have another suggestion. If your SCCM 2007 server is still deploying the old 2.1 FEP client version, then you should install the latest anti-malware platform update for the SCCM server so you can deploy it from there instead of WSUS:
http://support.microsoft.com/kb/2952678
http://blogs.msdn.com/b/minfangl/archive/2013/08/15/guidance-on-install-anti-malware-platform-updates-for-fep-2010-su1-and-scep-2012-sp1.aspx
Also, you may be affected by this:
"Anti-malware platform updates on MU will use special detection logic and applicability rules to make the anti-malware platform updates available only on computers with previous N-2 anti-malware platforms installed. For example, on April 8<sup>th</sup>,
anti-malware platform of version 4.5.x will be released on MU, and it will only be offered to computers where anti-malware platform version 4.3.x or 4.4.x is available. If a computer has FEP or SCEP client with version 4.1.x, it has to be upgraded to version
4.3.x first, then to the latest version (4.5.x). If a computer has FEP or SCEP client with version older than 4.1.x, because of the same N-2 rule, it has to be upgraded to 4.1.x first, then to 4.3.x, and then to the latest version (4.5.x). Required updates
will be kept on MU to ensure that this upgrade process is available for computers running older versions of the Microsoft anti-malware platform."
http://blogs.technet.com/b/configmgrteam/archive/2014/03/27/anti-malware-platform-updates-for-endpoint-protection-will-be-released-to-mu.aspx

Server behind TMG to grab updates from WSUS server

Hey Guys,
The last topic I created about grab superseeded updates from WSUS, is what this is stil about cause I can't accept this installing updates manually as a answer. So I went ahead an did even more research on this.
To keep it simple I went ahead and adjusted the Local Group Policy / Computer Conf / Admin Templates / Windows Comp / Windows Update / Specify an intranet Microsoft update server (http://172.16.3.3:8530)
Allowed a Rule through TMG to allow by directional traffic of TCP 8530 between the server lan (172.16.8.x <-> 172.16.3.3)
When I click check for updates its good I can see the established connection using netstat on port 8530.
As soon as I click download updates, it tries to grab from internet based Servers... i can see the SYN_SENT right away and I can see the blocked http traffic on the TMG.
So I went ahead and set the GPO setting and removed the port allocation behind it (http://172.16.3.3) Doing a netstat after clicking check for updates showed connection attempt to 172.16.3.3 via http, So I added the protocol to the allow rule between the
servers, and sure enough it changed to established, and I see the allow through the TMG. However this now gives an error when i click on check for updates...
There has to be a way for me to get this dang server to get updates from our WSUS server on the other side of the TMG firewall.. but how?! what am I doing wrong?!
*NOTE* with the port specified in the local GPO of 8530, I can access http://wsus/selfupdate/wuident.cab perfectly fine. I ran wuauclt /detectnow and no errors reported in the WindowsUpdate.log file
*NOTE* The Wsus server is setup to cache all update to a local dir, attempted to see the files in there but all contained random string .cab files, wish they would just contain just the KBnumber and the msu files for easier verification of updates available
in the cache.

The last topic I created about grab superseeded updates from WSUS, is what this is stil
A LINK to that post would be most helpful as I am absolutely clueless about what this post is about.
Allowed a Rule through TMG to allow by directional traffic of TCP 8530 between the server lan (172.16.8.x <-> 172.16.3.3)
The correct implementation for TMG is to create a Web Publishing Rule for the WSUS Server and ALLOW passthru of the client identity.
When I click check for updates its good I can see the established connection using netstat on port 8530.
As soon as I click download updates, it tries to grab from internet based Servers... i can see the SYN_SENT right away and I can see the blocked http traffic on the TMG.
So I went ahead and set the GPO setting and removed the port allocation behind it (http://172.16.3.3) Doing a netstat after clicking check for updates showed connection attempt to 172.16.3.3 via http, So I added the protocol to the allow rule between the
servers, and sure enough it changed to established, and I see the allow through the TMG. However this now gives an error when i click on check for updates...
I see that you've specified a PRIVATE IP Address as the target of the WSUS server (172.16.3.3), so the first set of questions revolves around why there's a TMG server involved in the first place, where this "WSUS Client" is located with respect to the
TMG interfaces, and where the WSUS Server is located with respect to the TMG interfaces. Maybe all of this is in the original post... wherever that might be. I'm going to assume that you're *routing* traffic through the TMG from one private network to another
private network, most likely from the DMZ to the WSUS server in the Internal LAN. (Just an educated guess.)
The second set of questions... is 172.16.3.3 the IP Address of the WSUS Server on the Internal LAN, or is that the address of the DMZ Interface on the TMG. Configured correctly, it should be the former.
Third set of questions.... always a question I ask because it invariably sheds amazing insights into other network issues.... Why are you configuring the policy with an IP Address, rather than the hostname of the WSUS server?
There has to be a way for me to get this dang server to get updates from our WSUS server on the other side of the TMG firewall.. but how?!
Properly configure a Web Publishing Rule. It's that simple. I have a WSUS server "published" to the DMZ so I can patch my DMZ servers and it works perfectly.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Can I set an OU to have 2 GPO's one to pull updates from local server and another from replica server

I'm looking for a solution where I don't change our current AD groups, (avoid using a local group and a field group), also trying to avoid using a server in a DMZ to handle field people (will need to buy a new server).
At the end i'm looking to use a replica server to push updates from the internet to the field group (or OU with a GPO pointing to such replica server) and use the local server to host the updates locally and push to the office people.
Probably this is the question that needs to be answered, can an OU group have 2 different GPO's pointing to 2 different WSUS servers (local and replica) (local updates vs updates from internet) and if an user of such group is in the office they get updates
from the local server and if he is in the field get the updates from the replica server? I know GPO's can have precedence set to the OU, but do they work like a trigger or something that tells them to go to the next GPO.
Thanks in advance

can an OU group have 2 different GPO's pointing to 2 different WSUS servers (local and replica) (local updates vs updates from internet)
No.
and if an user of such group is in the office they get updates from the local server and if he is in the field get the updates from the replica server?
There are two ways to achieve this. Typically we talk about this scenario when the mobile systems are going to use AU/WU to get Security Updates. Taking advantage of the fact that GROUP policy cannot refresh on a machine which is not "in the office", you
define a Registry Script to run in the user's STARTUP folder, which will set the registry values to configure that client to use the alternate source.
But, in the case where you have an Internet-facing WSUS server in the DMZ, and a Corporate-facing WSUS server on the LAN, you use the SAME URL, but use DNS to direct the client to the correct IP Address. When the client is on the LAN, the LAN DNS gives the
IP Address of the Corporate server; when the client is on the Internet, the Internet DNS gives the IP Address of the DMZ server.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Microsoft Security Essentials not taking definition updates from WSUS Server.

Hi Experts,
I have a WSUS server installed on network on which MSE definition updates are installed, but the MSE on the client computer is not getting updates from it.
When I click the update button it gives me error "Virus and spyware definitions couldn't be updated".
The error code i am getting is 0x80244018. The definition updates couldn't be installed please try again later.
I also have TMG on my network as a default gateway, I want to update MSE from WSUS not from microsoft update.
Do I have to change rules....??? or any suggesstions that how MSE can be automatically updated from WSUS, the WSUS setting is saved into a GROUP Policy and applied....
Please advice......

The error code i am getting is 0x80244018.
This is an HTTP 403 error, which is generally (but not always) indicative of a proxy server interfering with the download. Assuming this is happening when the client is trying to get Definition Updates from Microsoft during the daily scan, this error will
likely go away once you properly set up WSUS to provide the definition updates.
I want to update MSE from WSUS not from microsoft update.
To do this, you need the following:
The Definition Updates classification must be configured for synchronization.
An Automatic Approval rule that approves the Definition Updates classification for the appropriate target group(s) must be configured and enabled.
The policy setting Allow Automatic Updates immediate installation must be ENABLED.
Your WSUS server should be configured to synchronize multiple times per day (at least 2).
Your clients should be configured with a shorter Detection Frequency (8 hours is ideal).
With the above configured, the clients will check the WSUS server 3x-4x per day, find the latest available Definition Update, download it and install it immediately.
Note, however, that if the client fails to download and install Definition Updates, MSE will continue to do a check, and attempt to update the Definition Updates during the daily scan. If your TMG blocks the client's Internet access, then they
will continue to log HTTP 403 errors when this definition update attempt is executed. (This is why you configure multiple syncs and scans per day -- so the client *never* has to go to Microsoft to get the current definition updates.)
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Are form responses removed from Adobe server when deleted by user?

This is a server security question; when form responses are exported to excel, and then deleted from the workspace, do they remain on the Adobe server or are they gone? I need to know this to know the level of security that is applied to the server to determine if we can use Adobe with sensitive information. I understand forms are encrypted when responses are returned, but what happens to the information that is on the server?
Thanks

Hi,
Please refer to this page for more information: http://forums.adobe.com/docs/DOC-1384
If you still have questions please write back.
Thanks,
Lucia

RMI call back - How to refer to the client project from the server project?

Hi, I am working on an RMI assignment which basically needs me to use the RMI call back for the server to notify the clients.
I have 2 projects , one for the client and another for the server.
In the client project, I have a client interface and the main client class implements this interface.
In the server project, I have a server interface and a class that implements this interface.
I can use the server interface in the client project's code by adding the server project in the path of the client project. it lets me use the server interface in the code if I put "import.." statement.
But the issue is I can not do the same to access the client interface from within the server project's code. Since that will be a circular reference, the compiler does not let me use the client interface from within the server's code. This is putting me in a great difficulty and I am stuck here. What should I do so that I can use the client interface and the compiler won't complain?
Thanks for any help..
Regards.. js

Let me explain what I tried: I manually generated stub class of the client using the Eclipse IDE as mentioned in my previous message. The StockMSClient_Stub.class got created in my client project.
The common project has the 2 interfaces - one from the client and one from the server.
I have added reference to the common project from the client and server projects to use the interfaces.
With the above mentioned in place, when I run the server project, the registry binding of the server objects is very fine. But I am getting error in the applet at the line where I am passing the client object to the method provided by the server interface. The following is the code snippet in the applet where I am getting the error.
specifically the line: String response = objs.login(userId, password, smsClient);     ====================
public void login() {
            Registry reg = null;
            String userId = "test";
            String password = "test";
            this.smsClient = new StockMSClient();
            try {
     reg = LocateRegistry.getRegistry(rmiHost,rmiPort);
                      UserInterface obj = (UserInterface) reg.lookup(rmiStrings
                                                                                                                    [1]);
     User u = obj.find(userId);
     if (u == null) {
          System.out.println("This user is not valid");
     } else {
                     UnicastRemoteObject.exportObject(smsClient);
     reg = LocateRegistry.getRegistry(rmiHost, rmiPort);
     LoginLogoutInterface objs = (LoginLogoutInterface) reg
                             .lookup(rmiStrings[0]);
                    //getting error at the following line.
                    String response = objs.login(userId, password, smsClient);
                     System.out.println("response :" + response);
           } catch (AccessException ae) {
                   System.out.println(ae);
           } catch (NotBoundException nbe) {
                  System.out.println(nbe);
           } catch (RemoteException re) {
                  System.out.println(re);
} //end login()====================
Error is:
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
     java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
     java.lang.ClassNotFoundException: sms.rmi.graphics.StockMSClient_Stub (no security manager: RMI class loader disabled)================
I don't know why this is happening..Please help.
thanks & regards, js
Message was edited by:
jsitaraman

The new version of firefox, which installed WITHOUT my approval, FORCED an update to Adobe Flash. This new Flash plugin crashes over and over and over - to the point that I cannot use firefox anymore. This is one very angry customer. Argh.

firefox installed update without approval. big NO NO.
firefox forced update of adobe flash. I hate this crap.
firefox + new flash = totally unstable.
crash after crash after crash - cannot use.
customer angry.
very angry.
argh.

'''I fixed mine by removing the Ask.com extension.'''
Tools
Add-ons
Settings icon
View Recent Updates
Ask.com '''DISABLE'''
Running FF 8.0 on Windows 7 (64-bit)

Force client update from adobe server

Similar Messages

Maybe you are looking for