Force copy/suppress error messages?

Hi all,
I'm trying to copy my extremely fragmented 40gb photo library from an extremely slow external HD to my mac HD. After it spends hours getting halfway there, I get an error saying it can't copy, and the operation fails. Is there any way I can copy to have it suppress error messages, skip the problematic files, and copy the whole batch without stopping?
Thanks!
Alec

Without a 3rd Party APP, I use Tri-Backup for this, you likely will just have to keep pluggibg away, or try smaller chunks, or perhaps Carbon Copy Cloner...
http://www.bombich.com/software/ccc.html

Similar Messages

Suppress error message in 10g

using
:system.message_level:=25;
commit;
:system.message_level:=0;
i can suppress error message in froms 9i but when i run that form in iAS10g
the message "no changes to save" does not suppress.

It's not a good idea to suppress error messages. If there is a problem, then you (or user) won't know.
If you are using the system.message_level only to try and suppress, the "no changes to save" message, then a better way is to check if there are changes before doing the commit. Like this:
IF :System.Form_Status = 'CHANGED' THEN
Commit_Form;
END IF;

Copying movie error message (-69)

i am trying to copy a movie tht i jus bought from itunes but it keeps sayin unknown error occurred error message (-69) cn someone help me out plz.

Do you by any chance use strong Antivirus like Kaspersky? Temporary disable it when transfering maybe?

Suppress error message in fm READ_TEXT

Hi
I have a smartform in which i am trying to display some longtext.My problem is that i have to draw some extra lines when the longtext does not exist.I tried to verify if the longtext exists using the fm READ_TEXT(and set a flag if exists or not ),but it returns error message "Longtext does not exist" and the whole form crashes when the longtext is not found.
I have to only check if the longtext exists and display it and if it does not exist i have to display another window.How can i suppress that error message that comes from within the FM when the longtext does not exist?
Is there any other method to see if the longtext exists?
thanks

Hi Seba,
In the driver program please call the read_text FM with exceptions . May be that will help you.
1. call to FM read_text with exceptions
if it_texts[] is initial.
v_flag = 'X'.
call FM 'write_form' with another text element.(there write another hardcode texts which you want)
endif.
2. If you only need to output the text, you don't need to used READ_TEXT like in an ABAP program,
just use the INCLUDE command in SAPScript.
It will read the text and output it to your form.
The Syntax is like this:
/: INCLUDE &T166K-TXNAM& OBJECT &T166K-TDOBJECT& ID &T166K-TDID& LANGUAGE &EKKO-SPRAS&
Thanks,
Suma.

Suppressing error messages

Hi experts,
In my report there is a receipt no field in output list which is made interactive.
When receipt is double clicked call transaction 'ZFRREV_VAR' is executed which is transaction variant for tcode 'ZFRREV'.
Now in ZFRREV_VAR if pay-in-slip is generated for receipt error message is given.
I dont want this message to be displayed.I dont want to make changes in report of tcode zfrrev.
Is there any way to suppress this error message.
Please suggest.
Regards,
Kaustubh Kabre.

i dont think there is a way for doing this ...some where you should write the coding ....

Suppressing Error Message

Hi all,
I have written some code in validation field, that compares two values. If these values doesn't match then it retuens an error message. Now the thing is that this error message is displayed as inline error as well as at the top of the page. Is it possible to suppress the error message at the top of the page?
One more thing, is there any idea on how can we make use of stylesheets in style attribute of the field.
Actually I have a form in which I have different EditForm. All are in even row. Now I want to create a border of this edit form. I have tried to edit the .formevenrow in style.css but it creates a border on Edit form as well as the even rows within that edit form.
Every suggestion is welcomed.
Thanks

Hi all,
The first problem has been resolved.
We only have to make the noTopFieldError as true.
If anyone has any idea for resolving the second one, please post.
Thanks

How do I suppress error messages from displaying in GPIB calls?

I use GPIB Read and GPIB Write to access instruments on the bus. Both vi's supply status on error out.
I sometimes call these routines in situations where I do NOT want to reap error status, so I leave the error out terminal unconnected.
Here's the problem: I get error popups that display the GPIB errors (when there are some) even though I don't connect the error out terminals to simple error or general error.
How can I suppress the error messages??? I do NOT want them to display...
As always, thanks in advance for the assist!!!

PROBLEM SOLVED.
Thanks gentlemen. But... now I have to defend myself!
1. I have both old non-488.2 and newer 488.2 instruments on the same bus. When I send *IDN? to the old instruments, they generate errors. When I send model-specific (non 488.2) commands to the newer stuff, they sometimes error. I have to 'search' the bus and identify specific instruments (by mfg/model) that I'm looking for; I don't know what address they're at. So I go thru a loop (the index is the GPIB address) and for each address I try the old-style probe; if it fails, the new style; if neither succeeds, no one is home at that address. The problem is that in cases where I try the wrong probe for the device first, it frequent gets 'trapped' in the input buffer of that device causing it to incorrectly respond to its correct probe when I finally get to it. So I have to clear the device before sending it the probe to make sure its listening. Can't use *CLR since many devices don't recognize it; and since I can't send a command (yet) because the device is screwed up. So.... I figured out what I have to do to get the devices listening. The NEAT-3xx controllers are happy *after* they receive a null command with a LF (EOS) character - but they generate errors while processing the digital enema just described. The HP spectrum analyzers I use work fine when they get *IDN?, but generate an error on the bus when they receive the probe designed to get the NEAT controller to respond. So what I do is always send an EOS character first to each address before each probe - and then issue a GPIB read. I ignore the errors generated, and the data returned. Then when I probe, I always get a good response (if the probe type matches the device!) instead of an artifact from the garbage the instrument had to listen to. It's like drinking a beer after your wife calls you and nags - it clears your head and makes you ready to move forward. So now you know why sometimes I wanna ignore errors, but thanks for asking.
2. Why don't I use VISA? Well, find me a VISA driver for the NEAT-3xx family of controllers, and I will... I use raw GPIB reads/writes (and nothing else) in my 'scan the bus and probe each address' loop described above. I use raw GPIB commands for the NEAT controllers, and VISA for the HP. You guys designed this stuff, not me... What I don't know (and what you might help me with) is whether there's a 'raw' interface that allows you to talk to instruments using VISA calls when there is NOT a VISA driver for the device... kinda like "I wanna use the GPIB read/write, but use the VISA interface so all my code looks the same" deal...
Thanks again!

Bash: Suppress Error Messages

Hi Community,
I'm making a script to run in SUM in Lion. Unfortunately, even if you run:
launchctl load /System/Library/LaunchDaemons/com.apple.opendirectoryd.plist
when you run dscl it will give you an error (even though it still does it's job!). Anyways, here's my dscl command (I am finding the Hash of a given account):
theHash=`dscl . -read /Users/$theUsername ShadowHashData | cut -f9-25 -d" " | cut -f3 -d ":" | tr -d ' '`
Anyways, i've tried adding 2>/dev/null to the end of the command so that it will look like this:
theHash=`dscl . -read /Users/$theUsername ShadowHashData | cut -f9-25 -d" " | cut -f3 -d ":" | tr -d ' ' 2>/dev/null`
but it will still echo the error in the shell! Any ideas on what I can do to suppress the message? Thanks.

theHash=`dscl . -read /Users/$theUsername ShadowHashData 2>/dev/null | cut -f9-25 -d" " | cut -f3 -d ":" | tr -d ' '`

Suppress error messages

Hi All,
Is there a way to suppress an error message generated by the framework?
My situation is I've to report required fields to the user all at one time but I dont want to show those many "messages".
I use reportContextAttributeMessage method of MessageManager to highlight the fields, but I dont want to show n number of error messages on the screen. Only one error for ALL the required fields.
If I use a MessageArea to display the errors and then hide it, the error messages are displayed in the view anyway.
If I set maxVisibleMessages of MessageArea to 1, a table is displayed with paginators which is not the way I need.
Any workaround is appreciated.
Regards,
Rajit Srinivas

Hi Srinivas,
I am also searching for the same solution. Have you find any solution for your problem.
Have you find any alternative? or have you find the solution. If so can u please share with me?
Thanks in advance,
VJR.

Suppressing error messages from stderr

I am using JNI to connect to some C++ code (which I did not write myself) that has been compiled into DLLs. The writers of the C++ code found it necessary to spam a lot of status messages to stderr (using fprintf(stderr, "spam message")) and I want to suppress that output so that it doesn't show up in the console when my Java application is running. I have tried the following but it hasn't worked:
PrintStream out = System.out;
PrintStream err = System.err;
System.setOut(new PrintStream(new OutputStream() {
public void write(int arg0) throws IOException {}
System.setErr(new PrintStream(new OutputStream() {
public void write(int arg0) throws IOException {}
// call native methods
System.setOut(out);
System.setErr(err);
Does anyone else know how I can suppress the messages? Thanks

redirect stderr to /dev/null ?

Suppress Error messages on Dashboard

Hi ,
Is there any work around or fix I can use to avoid any live office error pop up on Dashboard caused by Webi server and web server?
LO Errors pop up when servers are busy or tomcat(web server) down but after clicking ok on error pop up data refresh fine on dashboard.
Does somebody get around these annoying errors pop up?
Thanks In Advance
Kumar

It's not just you, I am seeing this behaviour too.
Where 10.4 clients would fail silently, 10.5 is throwing the "Connection Failed" error message as you described.
I agree it is confusing to end users and would like a way to supress it, the only thing that springs to mind is manually mounting the share via a login hook that first checks network availability rather than using a WGM configured mount. Trouble is, to mount an afp share with the users credentials via a script is a whole new problem in itself.

PS CS4 version 11.0.2, suppress error message.

Hi,
I use PS CS4 version 11.0.2, and C# to access Photoshop type library. Able to resize images when it is fine, but for corrupted images getting error/warning message "....truncated image continue or cance.." despite giving Application.NotifiersEnabled =
false;
Application.DisplayDialogs = Photoshop.PsDialogModes.psDisplayNoDialogs;
Can I avoid this error notification?
Is there any way using type library I can check the image given is truncated/bad?
Thanks in advance.
Mani

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
EOS 5D Mark II
CR2
5.2
2.2
EOS 5D Mark III
CR2
6.7, 7.1
4.1
Photoshop CS6
7.0
8.3
Photoshop CS5
6.0
6.7
Photoshop CS4
5.0
5.7
The 5D Mark II was first supported by Camera Raw 5.2 which is compatible with CS4+.
The 5D Mark III was first supported by Camera Raw 6.7 and 7.1 which is only compatible with CS5 and CS6.
So the CS4 will never be able to open Raw 5D Mark III files.
Why doesn’t my version of Photoshop or Lightroom support my camera?
Choices:
Purchase CS6 full version (CS4 is too old to qualify for an upgrade)
Join the Cloud
Free option: download the free Adobe DNG converter, convert all 5D Mark III Raw files to DNG format then edit the DNGs in CS4
Photoshop Help | Digital Negative (DNG)

System copy export - error message unable to extend temp segment PSAPTEMP

I am performing an export of ECC ABAP+java instance and during the export of the source system I get the following error during the ABAP export:
ORA-01652: unable to extend temp segment by 128 in tablespace PSAPTEMP
ORA-27072: File I/O error
What do I need to do with this error? I have extended the tablespace via brtools but still getting the error.
Is this because I did not select the shutdown instance during the export? or do I need to do something more via brtools to the PSAPTEMP tablesapce?
I am running on Oracle 10.2.0.2. unix
Thanks
Mikie

Hello Mike,
>> My PSAPTEMP is 8GB.
I would bet the table you try to export is bigger (if you export sorted.. you will need temp space)
>> You have said you increased it to 800GB, that is almost a terabyte. Is this correct?
>> If so, how did you arrive at this figure.
As i already said .. this was the temp space that i needed in a sorted exported with many parallel exports (splitted packages and splitted tables). The system that i have migrated was round about 3 TB and we need to do it very fast.. so i needed the temporary space for the many parallel actions... but this should not be the "normal" case if you have no specific values.
>> And if you could define how you extended PSAPTEMP. Did you use brtools?
I have extended it manually (over sqlplus) .. i have monitored it in my test cases with the view V$TEMPSEG_USAGE and increased it if necessary.
>> did you recreate PSAPTEMP via SQLPLUS size 800GB and then dropped it and recreated to normal size?
No, in my case i have exported and imported it at the same time (distribution monitor) so there was no need to drop it after the export, because i have build up a new target database. But under normal conditions you would only drop the tempfiles after your work has been done. This is possible with Oracle 10g (with some restrictions).
=> http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_3002.htm#i2093894
Restrictions on Dropping Files To drop a datafile or tempfile, the datafile or tempfile:
- Must be empty.
- Cannot be the first file that was created in the tablespace. In such cases, drop the tablespace instead.
- Cannot be in a read-only tablespace.
Regards
Stefan

I am getting this error message when i try to open FF "ug-in object: TypeError: Components.classes[cid] is undefined"

This is the error message I get when i click to open FF after i downloaded the newest version: "ug-in object: TypeError: Components.classes[cid] is undefined" . The message is in the top left corner and not fully visible. i sent a message a few min ago so i am sending this b/c i copied the error message to help diagnose the problem.

This issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

System Tray Status Error Message

HP CP1025nw. XP. with USB connection. Printer works fine, but gives error message on screen, "HP Systems Tray has encountered a problem and needs to close. We are sorry for the inconvienience." "Please tell Microsoft about this problem. (send or Don't send)"
I get 2 copies of this error message (one at a time) wnen the computer is booted up (even if the printer off and USB unplugged) and 2 copies in addition for each "print command" from all various application sources. The printer works fine and prints are fine and there no functional issues. If the driver is uninstalled, then there are no error messages at boot-up. Latest HP driver is installed, same problem as with driver on OEM disc.
(a screen copy of error message is avialable)
Ronpro

Hi Ronpro,
Welcome to the HP Forums.
I see that you are getting a message "HP Systems Tray has encountered a problem and needs to close. We are sorry for the inconvienience." "Please tell Microsoft about this problem".
I will be happy to help you.
I believe the error is for the HP Device Settings options for the printer maintenance located on the Windows system tray.
I would run a full uninstall and reinstall. Turn off any startup programs interfering and temporarily turn off the Antivirus Software to get the full software installed properly.
Disconnect the USB cable first.
Uninstalling the Printer Software.
I would disable all the start up programs to make sure something in the background isn't causing any issues.
Go to start, run, type in msconfig, click the Services tab.
Click to select the Hide All Microsoft Services check box.
Click Disable All, and then click OK.
Click on the start up tab across the top, select disable all, apply, OK and restart the computer.
Temporarily turn off the Antivirus software.
Then reinstall the printer software again.
Full Feature Software and Driver.
Test the printer.
Check to see if the Device Settings feature will now open.
Cleaning the Paper Path and Exterior.
Restart the computer to see if the error comes up again.
Then go back in and enable the startup programs and Microsoft services and turn the Anitivirus software back on.
If the issue comes back after turning on the startup programs, I would leave everything unchecked except the Antivirus Software.
Please let me know if you need further assistance.
Thank you for posting on the HP Forums.
Have a great day.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Force copy/suppress error messages?

Similar Messages

Maybe you are looking for