Force ExtractMetadataProcess to change namespace

Hi,
I wanted the 'ExtractMetadataProcess' in the 'DAM update asset workflow' to use 'dc:' namespace on all uploaded assets.so that uploaded assets have properties with 'dc:' namespace in crx in metadata.Is there any way I can force ExtractMetadataProcess to use specific a namespace for the metadata it extracts,instead of application specific namespaces (like xmp: or photoshop: ) etc.
Can I pass any arguments to the process that might help me do this?
Thanks in advance,
Chaitu

The only way to interrupt a build in progress is to invoke the slide switcher (by pressing + for the next slide) and then press Return (to select the slide in the switcher). This is an admittedly cumbersome method, but is currently the only alternative.

Similar Messages

I accidentally clicked "do not ask me this again" about forcing an extension change when downloading. How do i get firefox to ask me this again?

I was using download helper and a box usually pops up that asks me if i want to force an extension change. I clicked the wrong box and then clicked "do not ask me this again". I would like to get the box back so i can change the setting.

This could be a setting in the add-on. In some cases, you can access an add-on's setting from its icon on the Add-on Bar. In other cases, you can access it from here:
orange Firefox button ''or'' Tools menu > Add-ons > Extensions category
Look for the add-on's "Options" button
Any luck?

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

Force keynote to change slides

Hey All,
Is there anyway to force keynote to change slides? I have an action that takes a while to run but sometimes I want to skip it but it won't let me do it until the action has finished.

The only way to interrupt a build in progress is to invoke the slide switcher (by pressing + for the next slide) and then press Return (to select the slide in the switcher). This is an admittedly cumbersome method, but is currently the only alternative.

I had to set up a new email ID, because I no longer had access to my old email address and Adobe was forcing me to change password, but I could not access the verification email. Now I cannot read my books under my new ID, even though I got Adobe support

I had to set up a new email ID, because I no longer had access to my old email address and Adobe was forcing me to change password, but I could not access the verification email. Now I cannot read my books under my new ID, even though I got Adobe support to set up my new ID.

If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

HT5621 apple forced me to change my Apple ID to my email address and some of those original purchases are gone

I recently upgraded to Windows 8 and 8.1 and now i cant get certain music from my devices to show up in itunes.
I have music on my ipod that is plugged in to my car from my original acct that is not showing up in itunes on my PC. Its like its invisible. the only thing that i can think of is that my original Apple ID is different than my current Apple ID. Apple forced me to change in maybe 2009 to a new ID to my email address.
Windows 8 seems to have issues with DRM or something..its like my different iTunes accts (user id...to email address) has hosed the music i originally purchased from Apple. Which is really not cool.
What do i need to do to resolve this?
thank you!

Apple did not force the user to do anything.
What really happened? Was the Apple ID updated to a new email address or was a new Apple ID created?
If the former, simply sign out of iTunes on the computer and devices, then sign in with the new credentials.
If the later, stop using the new Apple ID and continue using the original Apple ID.
Content acquired via iTunes is permanently tied to the Apple ID it was acquired with.

Migration Planning: What will happen with clients when changing namespace?

Hello,
We are planning to upgrade our EX2010 enviroment to EX2013.
Sadly our namespace in EX2010 is right now owa2.domain.com. The name owa2 is coming from last migration between ex2003 and ex2010. I'd like to remove this minor flaw if possible.
But what will happen with all the clients and mobile devices which are right now bound to owa2.domain.com? Is it possible to change the name back to owa.domain.com without manual interaction with the clients?
Kind Regards

Hi ,
Based on my knowledge for services like pop,imap and active sync we need to have the manual interaction.Without manual intercation we cannot achieve this.
Same time we need to have the new name on the SAN certificate .
For owa users you can simply communicate the new url via email and then for internal outlook and external outlook connectivity we need to repair the profiles to force the autodiscover service to fetch up the new name.On my experience most of the times repair
will not help.So again your only hope would be reconfiguring the existing profiles.
Note : Most importantly before renaming the host A record on the external and internal dns all you need is to reduce the TTL value for the existing host A record on the name owa2.domain.com.So
that external and internal clients will not have the dns cache for a long period.
Anyhow we will wait for some expert inputs on this case.Because their ideas might be good and different than me.
Thanks & Regards S.Nithyanandham

Change namespace in generated WebService

Hello experts,
i have to provide a webservice with three methods for an external Client.
So i created three functions in a function group. From the function group i autocreated my webservice with the wizzard. I changed the external/internal mapping properly, activate the webservice and create with soamanager a service and an endpoint and so on...
When i create a client with the autogenerated WSDL from the WebService, i can call and reach the autogenerated Webservice from this client.
The problem is: The external client cant reach our webservice. We have solved all problems with firewalls and certificates. The remaining problem is the namespace. The external clients request (we cant change it and have to provide a suitable webservice) with the namespace "urn:extnamespace" cant reach our servicepoint (error "service >extnamespace:Connect< not supported") :
<SOAP-ENV:Envelope
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:extnamespace="urn:extnamespace">
<SOAP-ENV:Body>
<extnamespace:Connect>
    <token>123456</token>
</extnamespace:Connect>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
From our test- client we use successfully this with the namespace "urn:sap-com:document:sap:rfc:functions"::
<SOAP-ENV:Envelope
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:extnamespace="urn:sap-com:document:sap:rfc:functions">
<SOAP-ENV:Body>
<extnamespace:Connect>
    <token>123456</token>
</extnamespace:Connect>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The wizzard have automaticaly generated the namespace "urn:sap-com:document:sap:rfc:functions". The external Client use another namespace. We have no option to change the external client or request of it. We need to provide a suitable WebService which use the same namespace.
We found no possibility to say the generation wizzard to use another namespace. Also we found no possibility with soamanager to change it. When we change the namespace in XSLT-Transformation with STRANS and call the WebService from our test client, we get allways the error "service >extnamespace:Connect< not supported".
The following links seems to be good on first sight, but dont help us:
[Changing SOAP Namespace for Web Service;
[service.sap.com/notes]   sap note 853824
If there is no way to change the namespace, we have to create the webservice manually. Is there a suitable example for this job available?
Greetings & thank you very much for your help!
Edited by: JosipI on Dec 17, 2010 3:16 PM

We have created a server interface in XI with the wsdl excepted by the external client. Then created a server proxy with this interface in our sap system. Then we have implemented the generated methodes by calling existing functions. It works fine.
Thanks a lot!
Edited by: JosipI on Dec 23, 2010 1:24 PM
Edited by: JosipI on Dec 23, 2010 1:25 PM

How to change namespace in outbound file

Hi,
When I creates a outbound file using file adapter, BPEL or jDeveloper creates a file with its own namwspace like ns1: or ns15: or so on... But if I want to change it to my own tag say like tns: or its:, is it possible?
example:
the usual creation in BPEL:
<?xml version="1.0" ?><ProvisionsInterface xmlns:ns1="http://www.mycomapny.com/ns/company/payments" xmlns="http://www.mycomapny.com/ns/company/payments">
<ns1:Provider>
<ns1:Id>1909909</ns1:Id>
<ns1:Name>BASSETTS</ns1:Name>
<ns1:Addr1>1 High Street</ns1:Addr1>
I want to change it to:
<?xml version="1.0" ?><ProvisionsInterface xmlns:tns="http://www.mycomapny.com/ns/company/payments" xmlns="http://www.mycomapny.com/ns/company/payments">
<tns:Provider>
<tns:Id>1909909</tns:Id>
<tns:Name>BASSETTS</tns:Name>
<tns:Addr1>1 High Street</tns:Addr1>
Any idea, plase advice.
Regards,
Sreejit

Hi,
Thanks for reply.
Actullay the requirement is that the target system doesn't want any namespace tag in front of the elements.
I have got the answer and created a wrapper xsd, by which you can change or remove the namespace from the output file.
example:
<?xml version="1.0" encoding="utf-8" ?>
<schema xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://www.mycompany.com/ns/suppliers" 
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd" nxsd:version="DTD">
<include schemaLocation="NameOfActualSchema.xsd"/>
</schema>
Regards,
Sreejit

Force user to change resolution

Is there a way to force the user to change resolution size?
because my interface is sized 1024x768. I also want it to reset
back to the resolution size that they set to when they exit
director

Kiryuu wrote:
> Do Xtras need to be burnt on CD too? or is it already
embeded
Hi Kiryuu,
Xtras do need to be bundled with your application on the CD.
They can be
either embedded into the projector or kept external in a
folder called
Xtras at the same level as the projector.
I have info on this in my Stub projector tutorial at:
http://www.fbe.unsw.edu.au/learning/director/publishing/projector.asp
Whether using Third party Xtras (Commercial Xtras) or the
ones that come
with Director, the same rules apply about packaging them with
your
projector.
regards
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.fbe.unsw.edu.au/learning/director
http://www.multimediacreative.com.au
email: [email protected]

Change namespace for development objects

hi at all,
i have to transport a lot of customer development objects (reports, tables, programs, WebDynpro-components...) from one system to another development system. in the source system all customer-objects are named like Y* or Z* (e.g. Z_CM_COURSDETAILS).
After that in the target system i have to change this names into our own company namespace (like /ABCD/CM_COURSDETAILS).
How can i do this? The company namespace is activated an part of the view V_TRNSPACE.
So, do i have to change every object by myself? Or is there a report or another automaticly help?
Thanks for your information and help,
regards
Hendrik

You can probably write a small BDC in the target system which accepts one type of objects, rename the object and activate it.

REG : Can we change namespace using any adapter module.

Hi All,
           I was working on the XMLAnonymizerBean adapter module. his module provides us the functinality of changing the prefix of namespace and selecting sprecified modules in the output XML. Now i am stuck with a question ie is there any module that can change the namespace in the output xml. for example :
xmnls : namespace1 to
xmnls : namespace 2.

Hi,
You can use a simple XSLT mapping in Receiver adapter . check this blog
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=%28J2EE3417100%29ID0975923150DB01234155231841994144End?blog=/pub/wlg/2620
Provide the actual namespace in the bleow code
<?xml version='1.0' ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:p2="provideyournamespace">
     <xsl:template match="/">
                   <xsl:copy-of select="*"/>
     </xsl:template>
</xsl:stylesheet>
Regards
Suraj

Change namespace of DCs

Hello gurus,
I have a question for you
I have created into my JDI a SC with a set of DCs.
Now I would like to change the value of the namespace prefix of my DCs.
Do you know a way of doing that ?
To try something, I have created a new product / SC / track into my JDI, with the new namespace prefix. I have tried to follow the note 888969 to move the DCs, but the only target SC I see is the "active" workspace from the same track, whereas I would like to get the "inactive" workspace from my new track.
Any idea on that ?
Thanks a lot for you help, ideas, ...
Best Regards,
Nicolas

Did you import the Development Configuration for the new track? If so, are you looking in the Inactive DCs view?

Forcing Save when changing Tab Pages

Hi,
I have a form with four different tab pages
and a common "Save" button (that performs
the Form commit).
The problem is that I would like to force
the user to commit any changes they have
made in one tab pages before allowing them
to change tabs.
Sort of a PRE-TAB-CHANGE trigger.
Any ideas on how to solve this ?
Thanks in advance.
Regards,
Klas Malmstrom

Hi
You may use trigger When-Tab-Page-Changed, asking for commit and if user answers 'NO' return him to previous Tab.
Andrew.

Force user to change cost center master data with validity date

Dear All!
we do have customer fields in table for cost centers (CSKS) and would like to force the user to do changes for these customer fields in combination with the change of the validity from/to date. I did not find any possibility to add this functionality with the customizing transaction OKEG or any other transaction. We now would need some good ideas from you as SAP experts!
Regards,

Hi,
You can use COOMKS02 enhancement.
Regards,
Eli

Force ExtractMetadataProcess to change namespace

Similar Messages

Maybe you are looking for