Force http uauth of every Blackberry connecting through BES

Greetings,
We have a BES on site that will allow port 80 access to the Internet for every attached Blackberry. We are using ACS version 3.3 for user authentication.
When a particular user connects to port 80 out over the single BES server - that user is authenticated via ACS. At that point, subsequent users are allowed access without the need to re-authenticate.
Is there anything I can do to force authentication for each Blackberry user access the Internet via the BES?
Thanks.

Http mode lets you enable port on firewall for http transport only. Anyway you have to open this port.
How to avoid using additional port:
1. I've read that configuring forms servlet (requires 9iAS with Apache) instead of forms CGI lets using a single port
2. If you configured Web server on one IP and Forms listener on another IP - both on ports 80. I think it should work but haven't tried it yet.
Both solutions are hard for me - first requires to buy and deploy 9iAS and second requires to have another IP and another certificate (if you want https).

Similar Messages

  • Every time I upload photos to Facebook it connects through an IOS folder and attaches to old comments etc, how do I stop this and just upload normally

    Every time I upload photos to Facebook it connects through an IOS folder and attaches to old comments etc, how do I stop this and just upload normally

    If you read the user tip you will see that you do not access your photos from the finder but from the upload window in your browser when you log into Facebook and go to upload - in the upload window the media browser in the lawer left hand corner - media ==> photos ==> iPhoto
    LN

  • Why is my iphone 4s slow connecting through wifi

    hi, i've just got my new iphone 4s, all set up ok but when i want to go on the internet through wifi, it is painfully slow.
    connecting through 3g is fine, but wifi is a no go. the phone does recognise my network, just doesn't connect to the internet. any help would be great.
    many thanx

    You're welcome.
    You tried every thing listed/provided including resetting your router and checking/changing the channels along with everything included with this link?
    http://support.apple.com/kb/HT4199
    Have you reset network settings on the iPhone?
    Have you tried connecting the iPhone to any other wireless network? Any problem there?

  • User cannot connect through VPN (Windows 2008 R2)

    Hello,
    TechNet has been a major help for some resent server and network problems our office has been having.
    There is one ongoing issue that no matter how much I try to fix, it wants to be stubborn and refuse to work properly.
    We have a user who has the necessary permissions to VPN using our router's IP address. Just recently, she found that she was unable to VPN. This was the beginning of our technical issues as after rebooting the router, our main server, and our QuickBooks
    server, we lost internet and access to the main server. Those issues have been resolved. However, the user is still unable to VPN.
    I have looked up every error code that has been presented when trying to connect to VPN (807 and 800 are the most frequent), and unfortunately, none of the solutions suggested worked. These errors occur when connecting through the WAN Miniport. I am trying
    to find out if I am overlooking something.
    What has been tried:
    Router rebooted
    Created new user in Active Directory
    Deleting VPN Users group and readding to user
    Changing tunneling protocol to L2TP instead of PPTP. Then, created a rule in Windows Advanced Firewall to allow UDP 1701.
    Creating new VPN connection.
    Confirmed with ISP that there are no issues with router
    I am not extremely familiar with Windows 2008 R2 and every fix I see online is extremely in depth with not much walkthrough information.
    I greatly appreciate any support anyone might be able to provide.
    Thank you!

    Hi ,
    According to your description, my understanding is that the client can’t access the VPN with error code 800 and 807.
    I have noticed that it failed to ping the VPN server form the client.  The VPN server should be connected from the client without VPN connection established. I suggest you to turn off firewall temporarily on both sides of client and VPN server, then
    try to ping the IP address of the VPN server’s interface which is connected to extranet network.
    If ping failed, there might be network connectivity problem. If ping successfully, check to see if the port is open for turning traffic. Detailed troubleshooting steps you may reference the link below:
    I received error 800, which says the VPN server is unreachable:
    http://technet.microsoft.com/en-us/library/cc772616(WS.10).aspx#BKMK_1
    Troubleshooting commom VPN related errors:
    http://blogs.technet.com/b/rrasblog/archive/2009/08/12/troubleshooting-common-vpn-related-errors.aspx
    If this problem still exits, does other user successfully access the VPN? Or just specified device can’t access? Would you simply describe the deployment of the VPN, such TCP/IP settings, VPN type.
    Best Regards,           
    Eve Wang

  • Help I purchase an Ipad yesterday I amusing internet connection through a netgear wired to my home computor since yesterday I am unable to open my emails or access my bank account ps I am not technical I am with orange broad band and have followed their i

    Help I purchased an ipad yesterday I am using internet connection through a wired up netgear router through my pc.Since then I cannot open my hotmail emails or access my online banking on wired pc and the navigator on ipad not working.
    I would appreciate help I followed all directions that Orange provided with netgear router

    Something here may help
    http://www.apple.com/uk/support/ipad/contact/
    pick a subject from left hand panel
    and this
    http://manuals.info.apple.com/en_US/ipad_user_guide.pdf

  • How can i airplay from my mac connected through ethernet to an aple tv 2 on wifi

    Hi everyone..
    im having troubles using Airplay on my mac.. i connect my mac to the internet and home network using an ethernet connection to my router (non apple branded router) .. my apple tv 2  is connected to my home wifi network from the same router.. when i first set up my apple tv.. i was able to see the Airplay icon on itunes and it would let me Airplay media from my mac to my apple tv.. however.. it disconnects after a little while.. same thing with viewing my itunes library from apple tv.. i was able to detect my shared library from the apple tv.. i was able to play some media but then it disconnected after some time.. but now.. the Airplay icon doesnt show up in itunes anymore.. and i cant see my shared library from my apple tv neither.. ive looked around for a solution and followed the tip to turn the ipv6 off.. it worked for some time but now the problem is back..
    i know the obvious solution is to connect my mac to the same wireless network as my apple tv.. but i would like to keep it connected through ethernet..
    Mac OS X Lion 10.7.4
    Apple TV 2 software version 4.4.4
    Thanks in advance

    thisguy. wrote:
    ......i know the obvious solution is to connect my mac to the same wireless network as my apple tv.. but i would like to keep it connected through ethernet.........
    I wouldn't say that was the obvious answer at all, my Mac is connected by ethernet and 6 of my 7 Apple TV's are connected by wifi, I haven't had any of your problems. The problem is most likely on your network.
    Intermittent problems
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    Consistent Problems
    A frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is the service being blocked on the network. Make sure your network isn't hidden, has a unique name, that MAC address authentication is disabled, security is set to use WPA 2 Personal and that there is only one router/device acting as a DHCP server and providing NAT services.
    Make sure your router/computer allows access over the following ports
    Port
    Type
    Protocol
    Used By
    80
    TCP
    HTTP
    AirPlay
    443
    TCP
    HTTPS
    AirPlay
    554
    TCP/UDP
    RTSP
    AirPlay
    3689
    TCP
    DAAP
    iTunes/AirPlay
    5297
    TCP
    Bonjour
    5289
    TCP/UDP
    Bonjour
    5353
    TCP/UDP
    MDNS
    Bonjour/AirPlay
    49159
    UDP
    MDNS (Win)
    Bonjour/AirPlay
    49163
    UDP
    MDNS (Win)
    Bonjour/AirPlay
    Refer to your router manual/manufacturer for any settings that are specific to that model.
    Another frequent cause of consistent failure to enable AirPlay or HomeSharing at all, is security software, in many cases configuring it correctly, disabling it or even uninstalling it can help, but in some cases the security software can cause problems that simply reconfiguring, disabling or uninstalling cannot reverse.
    If you are consistently unable to activate AirPlay, have tried all the steps in this article and have security software installed on your system, you might benefit from contacting its provider or participating in any online forums they run to discuss the matter with them.

  • Getting Creative Zen player to connect through amarok [SOLVED]

    Edited 12-27 to include new info
    I'm trying to get myCreative Zen player to connect through amarok but am having some problems. After some looking around I figured out the libmtp in the extra repository doesn't support this player, but the newest versions do. I made a new package for libmtp-0.2.4 and installed it since there's been some tweaks that affect this player since 0.2.2 which is in testing. I also had to recompile amarok since one of libs changed a name with the new libmtp. The instructions from libmtp mentioned udev rules needed to be defined, which was done by copying a file from the source code into /etc/udev/rules.d. That file (minus the parts relating to other players, which is pretty much the same as here):
    # UDEV-style hotplug map for libmtp
    # Put this file in /etc/udev/rules.d
    ACTION!="add", GOTO="libmtp_rules_end"
    ATTR{dev}!="?*", GOTO="libmtp_rules_end"
    SUBSYSTEM=="usb", GOTO="libmtp_usb_rules"
    # The following thing will be deprecated when older kernels are phased out.
    SUBSYSTEM=="usb_device", GOTO="libmtp_usb_device_rules"
    GOTO="libmtp_rules_end"
    LABEL="libmtp_usb_rules"
    # Creative ZEN 8GB
    ATTR{idVendor}=="041e", ATTR{idProduct}=="4157", SYMLINK+="libmtp-%k", MODE="666"
    GOTO="libmtp_rules_end"
    LABEL="libmtp_usb_device_rules"
    # Creative ZEN 8GB
    ATTRS{idVendor}=="041e", ATTRS{idProduct}=="4157", SYMLINK+="libmtp-%k", MODE="666"
    GOTO="libmtp_rules_end"
    LABEL="libmtp_rules_end"
    When I plug the player to my usb port dmesg gives
    usb 5-1: new high speed USB device using ehci_hcd and address 8
    usb 5-1: configuration #1 chosen from 1 choice
    As my normal user amarok doesn't seem to recognize anything, and mtp-detect gives:
    libmtp version: 0.2.4
    Attempting to connect device(s)
    usb_claim_interface(): Operation not permitted
    LIBMTP PANIC: Unable to initialize device 1
    LIBMTP PANIC: configure_usb_devices() error code: 7 on line 1561
    Detect: There has been an error connecting. Exiting
    As root mtp-detect gives me a bunch of output that seems like it's doing what it should, also while it's spitting this out the screen on the player changes to say it's docked, which wasn't happening as the normal user. This makes me think it's some permissions issue. I did find things from google telling me that sometimes the user needs to be added to a certain group to use libmtp, though it seemed somewhat distro dependent. My main user is in the following groups: dbus hal network audio optical storage scanner camera users thinkpad
    However I don't think my problems are solely permission related, since even as root amarok won't recognize the player. I can use gnomad2 as root, which mostly works, though it crashes when I try and close gnomad after adding music and the player thinks it's still docked even after unplugging it. I had to use a pin to reset it just to turn it off. When I ran it from a console I got the following output at the end after the crash
    PTP: Closing session
    ERROR: Could not close session!
    inep: usb_get_endpoint_status(): Protocol error
    outep: usb_get_endpoint_status(): No such device
    usb_clear_halt() on IN endpoint: No such device
    usb_clear_halt() on OUT endpoint: No such device
    usb_clear_halt() on INTERRUPT endpoint: No such device
    The application 'gnomad2' lost its connection to the display :0.0;
    most likely the X server was shut down or you killed/destroyed
    the application.
    Any suggestions for where to go from here?
    Last edited by mcmillan (2008-01-11 05:38:14)

    I tried uploading onto my school website, but it doesn't seem accessable from there. However I just modified the version number from the regular Pkgbuild file from abs. What I have is:
    # $Id: PKGBUILD,v 1.8 2007/05/20 19:11:05 travis Exp $
    # Maintainer: damir <[email protected]>
    #Contributor: Kevin Edmonds <[email protected]>
    pkgname=libmtp
    pkgver=0.2.4
    pkgrel=1
    pkgdesc="library implementation of the Media Transfer Protocol"
    arch=("i686" "x86_64")
    url="http://libmtp.sourceforge.net"
    license=("LGPL")
    depends=("libusb")
    source=(http://easynews.dl.sourceforge.net/sourceforge/libmtp/$pkgname-$pkgver.tar.gz)
    options=('!libtool')
    #md5sums=('597b62d994d9491531b9e67190f6cfe7')
    build() {
    cd $startdir/src/$pkgname-$pkgver
    ./configure --prefix=/usr
    make || return 1
    make DESTDIR=$startdir/pkg install
    If you still have trouble building it let me know some other way than that I can send you the package.
    I've been meaning to post an update about my issues. I've figured out that when I connect the player it creates device nodes with the root group.  Some have permissions set to 666, which seems to fit with the udev rules I posted. But some of them are only rw for owner and group, others only have read permissions. As a test I tried changing the permissions by hand to 666, and I can use gnomad as my regular user, though it's buggy and seems to crash randomly (not just when I transfer files like I originally thought). I haven't been able to test what amarok does, since for some reason it stopped working this weekend and I haven't had a chance to figure out what happened. It seems there some problem with the udev rules, but I don't know much about how that works to figure out what's going wrong.

  • Unable to access cisco asa via https or asdm!! connection interrupted message appears on the browser

    Hey guys,
    I am unable to access cisco asa device using https and cannot lunch asdm, after recent power failure at our location. I have asdm installed on my machine and whenever i try to access the asdm, receive Error: unable to lunch device manager from X.X.X.X The following is log from java console
    Trying for ASDM version file; url = https://x.x.x.x/admin/
    javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
    When i try to access it from the browser it show error message
    "The connection was interrupted"
    I am running CISCO ASA 8.3 (1)
    with asdm image as asdm 7.1.3
    JAVA version installed Java 7 update 71
    I have added the https:> to exception site list and set security level to medium,
    even ssh access is not working !!
    I would appreciate if anyone can help me out!!
    Thanks
    Fareed

    Hey lcaruso,
    thanks for information!!
    i was able to connection through console as suggested and regenerated the rsa key .. was able to connection through ssh, but the issue with the asdm or web access was not resolved. 
    I have tried few of the steps as suggested on 
    https://supportforums.cisco.com/document/49741/asa-pixfwsm-unable-manage-unit-sshtelnetasdm#collect_captures
    capture output 
    ZHHFP-FIREWALL1(config)# sh cap capin
    139 packets captured
       1: 18:50:17.654720 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
    443: S 2567327150:2567327150(0) win 8192 <mss 1260,nop,wscale 8,nop,nop,sackOK>
       2: 18:50:17.654812 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
    084: S 590825877:590825877(0) ack 2567327151 win 8192 <mss 1380>
       3: 18:50:17.655621 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
    443: . ack 590825878 win 65520
       4: 18:50:17.656078 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
    443: P 2567327151:2567327332(181) ack 590825878 win 65520
       5: 18:50:17.656139 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
    084: . ack 2567327332 win 8192
       6: 18:50:17.656475 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
    084: FP 590825878:590825878(0) ack 2567327332 win 8192
       7: 18:50:17.657696 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
    443: . ack 590825879 win 65520
       8: 18:50:17.657802 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
    443: F 2567327332:2567327332(0) ack 590825879 win 65520
       9: 18:50:17.657848 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
    084: . ack 2567327333 win 8192
      10: 18:50:17.658108 802.1Q vlan#1 P0 192.168.160.113.58085 > 192.168.160.126.8
    443: S 1351758892:1351758892(0) win 8192 <mss 1260,nop,wscale 8,nop,nop,sackOK>
    also i have downgraded the java to 1.6_45 but still not luck.
    error message i received on java console
    Trying for IDM. url=https://x.x.x.x/idm/idm.jnlp/
    javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
    at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
    at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
    at com.cisco.launcher.w.a(Unknown Source)
    at com.cisco.launcher.s.for(Unknown Source)
    at com.cisco.launcher.s.new(Unknown Source)
    at com.cisco.launcher.s.access$000(Unknown Source)
    at com.cisco.launcher.s$2.a(Unknown Source)
    at com.cisco.launcher.g$2.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Caused by: java.io.EOFException: SSL peer shut down incorrectly
    at sun.security.ssl.InputRecord.read(Unknown Source)
    ... 15 more
    Any help would be highly appreciated!!
    Thanks
    Fareed 

  • TNSPING failure and but surprising connecting through SQL*PLUS

    I have Oracle 9i and Oracle 10g express edition installed on my local machine.But since in the path i specified path of Oracle10g first so always tnsnames.ora got picked up from Oracl10g directory which is
         C:\softwares\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
    Following are the contents of my sqlnet.ora :--->
    SQLNET.AUTHENTICATION_SERVICES = (NTS)
    Following are the contents of my tnsnames.ora:-->
    CCTD91 =(DESCRIPTION =
    (ADDRESS_LIST =(ADDRESS = (PROTOCOL = TCP)(HOST = cctdev91.jankoc.com)(PORT = 1521)))(CONNECT_DATA =(SERVICE_NAME = CCTD91)))
    Now when i am doing tnsping to this i got the error as:
    C:\>tnsping cctd91
    TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-APR-2011 16:08:52
    Copyright (c) 1997, 2005, Oracle. All rights reserved.
    Used parameter files:
    C:\softwares\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
    TNS-03505: Failed to resolve name
    But when i connect through Oracle 9i client(SQL*Plus) like peter/devworks@CCTD91, then i am able to connect successfully to Oracle 11g.
    Could someone let me know why TNSPING is failing for this and then still why i am able to connect thru SQL*PLUS using the name defined in TNSNAMES.ORA. ?

    sqlnet.ora is having just one line:
    SQLNET.AUTHENTICATION_SERVICES = (NTS)
    I tried by adding another line: NAMES.DIRECTORY_PATH=(TNSNAMES) but did not make any difference so i removed.
    C:\>lsnrctl service
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 24-APR-2011 19:06:36
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    Service "XEXDB" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1002 state:ready
    DISPATCHER <machine: localhost, pid: 3288>
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost.XXX.XXX.COM)(PORT=1041))
    Service "XE_XPT" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    Service "xe" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    The command completed successfully
    C:\>lsnrctl status
    LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 24-APR-2011 19:08:48
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
    Start Date 23-APR-2011 16:05:49
    Uptime 1 days 3 hr. 2 min. 59 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Default Service XE
    Listener Parameter File C:\softwares\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
    Listener Log File C:\softwares\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.xxx.xxx.COM)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
    Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "XEXDB" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    Service "XE_XPT" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    Service "xe" has 1 instance(s).
    Instance "xe", status READY, has 1 handler(s) for this service...
    The command completed successfully
    C:\>
    Oracle 11g is installed remotely on our office LAN.
    Please note that i just removed company name with XXX from the above lsnrcts commands output, just for security reasons.

  • Installing an application (adium x 0.89/msn) + connecting through proxy

    hi all. most .dmg files will mount and tell u to drag the .app icon into 'applications folder'
    may i ask, what is the difference if u drag it into MACINTOSH HDD->APPLICATIONS folder, vs dragging it into /user/applications.
    apparently it had an observable effect on my installing of Adium X 0.89 (i use this for msn and i will elaborate why)
    previously when i dragged adium.app into macintosh hdd/applications, the default folder, i experienced several problems. i could not initiate messages to my contacts, it would display an error message of "Could not send; a connection error occurred." however when others msged me (if i get them, that is), i can reply to them, if im fast enough. if say i don't reply within 1/2min, then any msg i type to them will be so-called counted as a new msg, and i cant initiate it again! the same error msg surfaces.
    i checked my connection settings and it's ok. i uninstalled adium.app (search adium on spotlight and deleted everything that had adium), plus emptied trash. then i took a new move in installing in /user/applications folder and it worked fine!
    until now. it crashed all of a sudden for no reason. i uninstalled it again. installed it again in /user/applications folder, and it has the prev problem of not being able to initiate converesations again! (how frustrating!)
    why don't i just use microsoft messenger for mac 5.1 then? you might ask..
    very good question. i want to use that too. but i can't! see, i'm staying at halls, at Monash Uni, Australia. we connect through our uni's http proxy + port. for msn 5.0, i cant enter my username/password (as the textfields are grayed out). for adium, i can enter them. on contacting msn, they told me my msn is corrupt, i shd uninstall it completely and reinstall it with a version i get from them, not other sources. i did that, and still can't. i have a strong feeling it is a problem defunct, they have yet to make it compatible to mac users who want to connect through HTTP PROXY (not socks 5.0) and have to enter their username/password to enter this proxy.
    pls enlighten on the above issues, and hopefully provide a solution.

    oh come on im sure someone knows sth abt this...
    installing any program in /mactintosh hdd/applications
    vs /user/applications
    ........

  • HT1369 how to connect through itunes when activating?

    how to connect through itunes when activating?

    See if this helps
    http://store.apple.com/us/help/iphone#carrier_info
    Browse down to "Activate your iPhone"

  • Trouble joining an existing windows network when connected through airport

    Need help!
    I can connect fine to the internet and to my office's windows xp based network when i connect my Pbook directly ( with ethernet cable), but if i try connecting through my airport extreme the network connection just doesn't work, i mean the internet connection works fine but my network is gone. as soon as i go back to the cable it all works fine again.
    Can anybody give me a hand? im sure its possible, i just dont know how to overcome this problem. and it keeps my laptop glued to the desk.
    tks

    I think this might be the fix, even though the symptoms stated are a bit diff...
    http://docs.info.apple.com/article.html?artnum=304482

  • Os x isnt showing my iphone4s when i plug it in through usb and i can't connect through bluetooth.

    os x isnt showing my iphone4s when i plug it in through usb and i can't connect through bluetooth.help!

    Try the steps in this article: http://support.apple.com/kb/ts1591

  • Is there way to share Air-Port Wi-Fi connection through ethernet port?

    I was wondering if anyone could help me out with this, I have wireless network in the building, and is there way to configure Mac Mini to share Air-Port Wi-Fi connection through ethernet port (feed Vonage adapter)?

    Have you actually shared wi-fi to ethernet on a Mac? I ask because it is not usually that simple, it is a more complicated configuration. Most folks who do it the way you described get a self assigned IP and nothing connects.
    See my comment here;
    http://discussions.apple.com/thread.jspa?messageID=12585788&#12585788
    I have a Vonage phone adapter and Vonage does not provide the info that you need to hand configure these boxes, I have tried in the past with the one I have with a US phone number from here in Mexico.
    Dah•veed

  • Can't view a report connecting through ODBC(RDO)  to DB with InfoView (CMC)

    Environment :
    Crystal Reports machine :
    OS :
    Windows Server 2008 64-bit
    Crystal Reports Developer 2008 SP0
    Crystal Reports Server 2008
    DB Server:
    Windows Server 2003 32-bit
    SQL Server 2000 SP3
    What is going on:
    All the reports connecting through ODBC (RDO) to the database server work fine in the developer interface (I can preview them) but cannot be accessed if I try to view them in InfoView / CMC ("Please wait while the document is being processed" message box doesn't go away...).
    I have tried both the SQL Server driver 6.00.6001.1800 and SQL Server Native Client 10.0 2007.100.1600.22 with the same results.
    PS All the reports using OLE DB work just fine, I would prefer to have the ODBC option working through the web interface because I have a few hundreds report to change otherwise ...
    Virgil Rucsandescu

    Our solution is a php web application, but this is not relevant (in my opinion), and here it is why:
    The php code should show the reports by using the direct links given by InfoView
    (like http://dev-web:8080/CrystalReports/viewrpt.cwr?id=801&apsuser=user&apspassword=password).
    Actually in this moment these links are looking different because currently we're using C.R. 10 + C.R. Server 10, but we are planning to move to CR 2008 + CR Server 2008.
    So now I am testing how these direct links do work, they're actually working perfectly till now, but only if I connect through OLEDB to the DB server (SQL Server 2000). Any attempt to do it through the 2 ODBC drivers failed until now.
    And I don't want to think about changing the data source hundreds of reports (lot of them having subreports too) ...

Maybe you are looking for

  • I just bought my iPad air and I would like to know how to get the App Store on it

    I just bought my iPad air and I would like to know how to get the App Store on it?

  • Apex error when printing. doc format

    Hi everybody Please help me with this mistake. I'm doing an application in Apex. I have a button who call a procedure with which I print a documento in format .doc. This is the code of the procedure: create or replace PROCEDURE ARCHIVO(solicitud in n

  • HELP! I've installed, but I can't compile yet....why?

    I've already downloaded and installed the J2SDK files for my computer. I went into DOS and tried to compile a program. the reply was 'invalid command'. I'm not brand new to the language, but this is the first time downloading it on my own computer (I

  • .msi for Adobe Flash and Shockwave

    I need to get .msi files for Adobe Flash 10.0.32.18 and Shockwave 11.5.1.601.  i can't find them any where. We have a new DOD Security Directive stating that we have to be at this level. Does Adobe have a product like WSUS since its product are conti

  • 1099 MISC Form - IRS

    Hi All, I want to print 1099 Misc and send the E-file to IRS as per the guidelines. However i am not sure of the output as the state code, which is mandatory as per IRS guidelines, is not appearing in the file generated by T.Code using s_p00_07000134