Force quite and now time machine does not mount

I had to force quit Mac Book Pro and now the time machine sparse bundle will not mount. Disc Warrior says it is corrupt. Any other ways to get it sorted?

If Disk Warrior can't fix it, then wipe the drive and start over with Time Machine.

Similar Messages

I recovered my back up via a wired connection. now Time Machine does not recognise older back ups wirelessly and wants to do a first back up

I recovered a back up from my time machine via a wired connection after getting the 'white screen of death'. Now Time Machine does not recognise any back ups on the time machine when connected wirelessly and wants to do a first back up of the whole machine. How do I get my mac to recognise these older back ups? It connects to the wifi network the time machine creates fine, with the same name and password.

I recommend the following.
1. Reset the TC to factory.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Rename the TC to SMB standard.
That means short names.. 2-20 characters but less than 10 is excellent. eg TCGenx (use number for x that is actual generation of the TC)
No spaces.
Pure alphanumeric. No apostrophe.
3. Ensure IPv6 is set to link-local..
Do the same thing for ethernet if that is used.
4. Manually mount the TC disk in Finder.
Use Go in the top menu.. connect to server.
Type in
AFP://TCname.local (where TCname is your new short name for the TC and local is default domain .. it helps using the domain I found).
You will then find the computer either can or cannot find the network resource.. if it fails something else is wrong with the actual network and you will need to fix that.
It will request the password if it is found.. password is public by default unless you changed it.. type in the password and check to keep it in your keychain.
5. Delete current TM setup and redo it with the newly named TC.
See A4 here. http://pondini.org/TM/Troubleshooting.html
If your backups cannot be found, try B6 again, now that you actually know that the disk has been properly discovered.

HT201250 I disconnected My Passport by mistake, and now Time Machine can not find it. Although connected, it does not appear in the My Devices section of Finder. What do I do?

I disconnected My Passport by mistake, and now Time Machine can not recognise it. It no longer appears in the My Devices section of Finder. What do I do?

Hello rjhc49,
Thank you for the details of the issue you are experiencing with your external hard drive. I found an article with steps you can take when an external device is not being recognized.
I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thank you for using Apple Support Communities.
Best,
Sheila M.

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?

I also had problem accessing my WD MyBookLive after upgrading to Maverick.
To resolve the problem, I used Connect To Server (Cmd K) to specify the IP address.
Then I enter a user id and password I created in the MyBookLive.
You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
Just enter the MyBookLive IP address as the URL.

Update 10.5.6: external HD used for Time Machine does not MOUNT anymore

I've used this LaCie external Little Big Disk since November 2007 with Time Machine, without problems. Recently, after updating to OS 10.5.6, the disk does not mount anymore when connected by FireWire800. Same result when using FW400 and USB.
The disk shows up in the System Profiler under FireWire. When I run analysis with a program 'Data Rescue II', it also sees the disk.
Main issue: disk does not mount anymore. So no more TM backups possible.
Although the disk also shows up in Disk Utilities, I can't partition or reformat it. I ran the LaCie Update Tool 2.0.1 and it says firmware is up-to-date.
I also reinstalled the Combo Update 10.5.6 without result. Also did all the forum recommendations such as resetting PRAM and using Terminal to 'mount /dev/xxx'. Does not help.
I feel this is an Apple issue.

Yes, did it three times. Also already hooked up in daisy chain, and yes, also connected to another Mac (also 10.5.6). Same result. I think it's an OS 10.5.6 issue, because it happened after the update and I had never problems in the last year using this disk with TM (it's not full either). I hope it's not, however, but I am afraid it is. Also I've posted the issue at LaCie support and see what they answer.
Thank you for your reply.

Logic Board was replaced - Now Time Machine does not show previous backups

Hi
Bit desperate here.
My Apple store changed my hard disk and the logic board along with it.
I'm now aware that this means my MAC address has changed - which is what your Time Machine looks for when it tries to back up.
So now the backups are failing, and I KNOW there's a HINT offered on macosxhints.com
http://www.macosxhints.com/article.php?story=20080128003716101&query=Time%2Bmach ine%2Blogic
- but I have absolutely NO previous experience with TERMINAL and minute I try to re direct terminal to my Time Machine Volume : it tells me there is no such file or directory. It's all gobbledygook to me. I think the person that wrote it ASSUMED some previous knowledge of using terminal.
The things I DO know are: My MAC address number, and my TM Volume is called The BIG BACKUP (not Time Machine). It doesn't
Can anyone make this clearer for me, or indeed is there an easier way.
I know I could just tell TM to change disk and just star afresh - but I'm under the impression that it's very uneccessary for me to lose all my previous backups.
Hey, many, many thanks if you can help
Simon

Hello K.V.
(I'm having to come back to this when I get a minute at the moment)
Many thanks for your suggestions so far. Several things have occured:
Firstly I did what you instructed in your last post, that seem to let me go on without any further errors - so I then when back to my desktop - dismounted The BIG BACKUP and restarted the whole mac, remounting the The BIG BACKUP. I went to the 'Back Up Now' commend to test it and it failed, sayind it could not find the file or directory.
So this evening I started in terminal from scratch - when I got to the ls -al command I noticed that my old address was no longer in the list, it was on the line before the new address before (I also punched in the wrong mac address intially but spotted it and rectified my mistake .001f5beb34e5 being the correct one) as you can see from below it now says my old address is No such file or directory.
Here is a copy of what happened
Last login: Mon Jul 21 19:27:07 on ttys000
simon-evanss-imac:~ simonevans$ cd /Volumes/"The BIG BACKUP"/Backups.backupdb
simon-evanss-imac:Backups.backupdb simonevans$ xattr -p com.apple.backupd.BackupMachineAddress "simon-evanss-imac"
No such file: simon-evanss-imac
simon-evanss-imac:Backups.backupdb simonevans$ xattr -p com.apple.backupd.BackupMachineAddress"simon-evanss-imac"
simon-evanss-imac:Backups.backupdb simonevans$ cd ..
simon-evanss-imac:The BIG BACKUP simonevans$ ls -al
total 104
drwxr-xr-x@ 16 simonevans staff 612 20 Jul 22:44 .
drwxrwxrwt@ 6 root admin 204 21 Jul 21:13 ..
-r-------- 1 simonevans staff 16 24 Apr 23:56 .001f5beb34e5
-rw-r--r--@ 1 simonevans staff 6148 21 Jul 19:08 .DS_Store
drwx------ 3 simonevans staff 102 24 Apr 23:55 .Spotlight-V100
d-wx-wx-wt 3 simonevans staff 102 19 Jul 09:25 .Trashes
-rw-r--r-- 1 root staff 0 25 Apr 09:23 .com.apple.timemachine.supported
drwx------ 8 simonevans staff 272 21 Jul 19:32 .fseventsd
drwxr-xr-x@ 3 root staff 102 20 Jul 22:56 Backups.backupdb
-rw-r--r--@ 1 simonevans staff 1024 1 Jan 1970 Desktop DB
-rw-r--r--@ 1 simonevans staff 2 1 Jan 1970 Desktop DF
-rw-r--r--@ 1 simonevans staff 0 1 Jan 1970 Icon?
drwxr-xr-x 5 simonevans staff 170 24 Apr 23:55 MANUALS
drwxr-xr-x 5 simonevans staff 170 24 Apr 23:55 SOFTWARE
simon-evanss-imac:The BIG BACKUP simonevans$ sudo fsaclctl -p /Volumes/"The BIG BACKUP"
Password:
Access control lists are supported on /Volumes/The BIG BACKUP.
simon-evanss-imac:The BIG BACKUP simonevans$ sudo mv .001b639a9935 .001f5beb34e5mv: .001b639a9935: No such file or directory
simon-evanss-imac:The BIG BACKUP simonevans$ sudo mv .001b639a9935 .001cb37264bc
Password:
mv: rename .001b639a9935 to .001cb37264bc: No such file or directory
simon-evanss-imac:The BIG BACKUP simonevans$ sudo mv .001b639a9935 .001f5beb34e5
Password:
mv: .001b639a9935: No such file or directory
simon-evanss-imac:The BIG BACKUP simonevans$
Very confusing huh.
To be honest now, I guess my prime concern is if I've made any damaging changes to things I don't understand or not - and I think it may be best if I accept the Time Machine starting afresh from square one by clearing the external drive and re-directing TM to it. I could live with this I guess, so long as it worked.
What do you think?
Many thanks
Simon

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the o

MAC OSX 10.5.8 and 2TB Time Machine would not back up. Saw discussion that suggested you change name without apostrophes etc. Went into Time Machine and did a manula backup without a name and it appears to be backing up now. Does this remove delete the old backup's ?

Does this remove delete the old backup's ?
No, they are all just fine.

I have a 2013 macpro I upgraded to yosemite. Now I find time machine does not work, nor my old back up using a click free wireless back up. What is the status of time machine and yosemite?

What is the status of time machine not working with yosemite?
I upgraded mu mac pro to yosemite and since have found time machine does not work.
Also, my old backup via a clikfree wireless backup does not work any longer.
Is anyone working on this issue?
Is there anyway I can backup my information today and until time machine &
yosemite get fixed?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

HT3275 My time machine does not back up and giving me this error message: The backup disk image "/Volumes/Data-1/Amiel's MacBook Pro.sparsebundle" is already in use. Pls help.

My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.

Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category.

Since installing Lion, I have not been able to utilize Time Machine (does not recognize the back-up drive); my wireless mouse does not function properly; I have experienced unreasonable delays in the system. Is there a fix or upgrade coming?

Is there a fix or upgrade to deal with the many problems I am experiencing since I installed Lion? I can no longer utilize Time Machine (Does not see the back-up drive); my wireless mouse does not work properly; my iMac has slowed down considerably. I am reminded of having a PC machine again. Bummer!

Either downgrade to Snow Leopard or try reinstalling Lion.
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Time Machine does not backup all of my files

Hi,
If I compare my Dropbox folder to what Time Machine backups there are differences which means that Time Machine does not backup all files:
diff <(cd "/Users/phil/Dropbox" && ls -R | sort) <(cd "/Volumes/TimeMachineBackup/Backups.backupdb/Computername/Latest/Macintosh HD/Users/phil/Dropbox" && ls -R | sort)
There are also differences if I compare my user folder to the Time Machine Backup:
diff <(cd "/Users/phil/" && ls -R | sort) <(cd "/Volumes/TimeMachineBackup/Backups.backupdb/Computername/Latest/Macintosh HD/Users/phil/" && ls -R | sort)
I did not exclude the folders affected from the Time Machine backup.
I have verified this behaviour on other computers as well.
Does anybody else have this kind of problem?
Philipp

These commands solved the problem for now:
1) Stop the Dropbox desktop application (if needed)
- Click on the Dropbox icon.
- Choose Quit/Stop/Exit
2) Open your Terminal app (Located at /Applications/Utilities/Terminal)
3) Copy and paste the following lines into the Terminal, one at a time, and press RETURN after each one. PLEASE make sure you copy and paste these commands (don't type them by hand), as getting them wrong could cause some harm. You'll be prompted for your computer user's password (not your Dropbox password) after entering the first command. Keep in mind that the password field in the terminal will remain blank as you type your password. After you type it, just press ENTER.
sudo chflags -R nouchg ~/Dropbox ~/.dropbox ~/.dropbox-master
sudo chown "$USER" "$HOME"
sudo chown -R "$USER" ~/Dropbox ~/.dropbox ~/.dropbox-master
sudo chmod -RN ~/.dropbox ~/Dropbox ~/.dropbox-master
chmod -R u+rw ~/Dropbox ~/.dropbox ~/.dropbox-master

Time Machine does not see my external HD

I would like to setup TM but it does not see my external HD, but I can see it on desktop in and finder. I can browse it. But time machine does not see it and forces me to use airport time capsule but I don't have it. Help please.

What format is the external drive in?
If it's formatted for Windows (either using the MBR partition table or using FAT/NTFS volumes) then Time Machine cannot back up to this disk.
The disk needs to be formatted as Mac OS X Extended using either the APM or GPT partition tables.
Life is complicated somewhat by the fact that the OS, in general, can read MBR/FAT drives, but they're not suitable for Time Machine (limitations in the disk formats prevent some of Time Machine's features from working).
You can check the current partition map/disk format in Disk Utility.app - just select the disk on the left and the information will be displayed below. If the disk is using MBR and/or FAT then you'd need to reformat the drive in order to use it with Time Machine.

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?

This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl

Time machine does not back up iPhoto in mountain lion ?

My Time Machine does not back up my iPhoto library. When I open Time Machine I get Desktop display going back to installation date.
All other applications respond correctly including Mail, Contacts, etc. My Seagate drive is not involved in the present programme of repair I have been told by Apple. Any ideas?

I'm now fixed and done (update to latest software and learn how to use it)
Thanks again Ivan for the article, it alerted me to otherwise incomprehensible changes in iPhoto/Time Machine operation such as in my case would transfer 3.8GB of data to restore a single photo, while apparently loosing all photos added after that backup time.
However the article says:
When using iPhoto ’11 (version 9.2 or later) and Time Machine with OS X Lion 10.7.2 (or later), iPhoto no longer has the Browse Backups option. This means that instead of restoring specific photos within your iPhoto Library, you must restore your entire iPhoto Library.
This may be practically true but it is technically false.
To restore a single photo in iPhoto '11 with Time Machine it goes something like this:
Start with your Time Machine hard drive and navigate many steps (including showing package contents where necessary) all the way through to the photo/date you want. Drag it to your desktop. (Do not make any edits in Time Machine!) Import to iPhoto. Click on last import in iPhoto. Right click the photo and change the event name, then look for it at the right date in iphoto with the new event name.
Hopefully those with more time and patience can check this out and see what it can do. I had to do it twice with Apple suport senior tech to get it. What a pain compared to iPhoto' 09 but at least now I can restore iPhoto library or a photo if necessary.
David

Time machine does not appear in Disk Utility

Time machine does not show up in Disk Utilities, connected by ethernet. I need to erase the disk. How to solve?

I am sorry - I simply do not understand your instructions!
I have 2 Time Capsules and have been using both. However a few days ago they quit working. I have had to turn off Time Machine because I am getting hourly alerts that back-up failed because there is not enough space. It does not delete old backups to provide additional space. I am willing to erase both to try to get them working again but I cannot figure out how to erase and setup the drives. Hence I turned Time Machine off.
There is nothing wrong with the MBP internal hard drive. "Sparse bundle" is total Greek to me! My wifi network appears to be working properly. The internal HD is mounted in Disk Utilities and verified as working properly. I am a long time user of Apple but I am still a novice (Level 1)!
Perhaps I should start a new thread.

Force quite and now time machine does not mount

Similar Messages

Maybe you are looking for