Force Shutdown Yosemite OS X Bug
Hello,
I installed Yosemite OS X 4 days ago. Since then the system shuts down every couple of hours. Does anybody know how to fix this bug?
Thank you
Contact HP. Or try using Image Capture. You will need the most recently updated drivers for the device.
OS X- Printer and scanner software available for download
Similar Messages
-
I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise? During installation emptied cache, etc. Backed up using time machine, fortunately.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
IPAD: Forced Shutdown During Update. iPad No Longer Working! Help?
I did a force shutdown during the latest ios6 bug fix update and now my ipad will not work at all. iTunes does not reckognise the device when I connect it to my pc via usb. I have tried everything I can think of to have it start but with no success. It just keeps displaying the Apple logo, then flickering, then showing some text data in white, then goes to a blank black screen, then the logo and all over again. It does shutdown but cannot do a startup to the swipe lock page.
It would be hard to believe one could fully kill an ipad so quickly and easily. Please tell me that this is a fixable problem! Any way to get it to start again?
Thanks!
ManahenYou will need to restore your iPad to factory from recovery mode and connecting to your computer. Connect your iPad to your computer and hold the home and power button down for 15 to 30 seconds until you see the silver apple. Once you see the silver apple let go of the power button but keep holdng the home button until you see the itunes logo and white usb cord. At this point you should be able to restore in itunes.
-
Mini has had two forced shutdowns
Mini has had two forced shutdowns in as many weeks.
This is where you have the transparent falling curtain on your screen saying that an error has a occurred and the mini needs to be shutdown.
On both I sent the error report to Apple and of course don't expect any response from them.
On the second incident I copied the report to text edit so that I could post it here and hopefully get an idea from someone a whole lot smarter than me as to what might be happening.
One other piece of info, on restart I opened iStat to see what the cpu temperature was thinking that overheating might be the issue. It reported 130 deg F. It currently reports 126 deg F.
Here is the error report. Hope someone can scan it and give me a clue.
Thank you.
Interval Since Last Panic Report: 7772391 sec
Panics Since Last Report: 3
Anonymous UUID: 38F4C41B-8F12-4441-AE52-4B858F3A9CB0
Fri Jul 11 10:25:45 2014
panic(cpu 0 caller 0xffffff8000584a70): "soclose: NOFDREF"@/SourceCache/xnu/xnu-1699.32.7/bsd/kern/uipc_socket.c:1048
Backtrace (CPU 0), Frame : Return Address
0xffffff80f0bc3e80 : 0xffffff8000220792
0xffffff80f0bc3f00 : 0xffffff8000584a70
0xffffff80f0bc3f50 : 0xffffff800059899f
0xffffff80f0bc3f70 : 0xffffff800023dbbc
0xffffff80f0bc3fb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: Macmini5,1 (Mac-8ED6AF5B48C039E1)
System uptime in nanoseconds: 11797604467292
last loaded kext at 5076207744386: com.apple.filesystems.afpfs 9.8.1 (addr 0xffffff7f81145000, size 356352)
last unloaded kext at 110352933328: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80b82000, size 65536)
loaded kexts:
com.mingjie.driver.AudioCapture 1
com.Logitech.Control Center.HID Driver 3.6.0
com.apple.filesystems.afpfs 9.8.1
com.apple.nke.asp_tcp 6.0.1
com.apple.filesystems.smbfs 1.7.2
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleUSBDisplays 323.3
com.apple.driver.ApplePlatformEnabler 2.0.5d3
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.filesystems.autofs 3.0
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.security.SecureRemotePassword 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.driver.IOBluetoothHIDDriver 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: Macmini5,1, BootROM MM51.0077.B10, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, SMC 1.76f0
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364B54463531323634485A2D3147344B31
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364B54463531323634485A2D3147344B31
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE4), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc50c, 0xfa130000 / 4
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8281, 0xfa113000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: hub_device, 0x0451 (Texas Instruments), 0x2046, 0xfd130000 / 4
USB Device: hub_device, apple_vendor_id, 0x9121, 0xfd131000 / 5
USB Device: Apple Cinema Display, apple_vendor_id, 0x921d, 0xfd131200 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3I had another shut down:
Here is the console log - following that is the report sent to Apple.
8/4/14 7:07:44.000 AM bootlog: BOOT_TIME 1407161264 0
8/4/14 7:07:59.313 AM fseventsd: event logs in /.fseventsd out of sync with volume. destroying old logs. (88240 14 309654)
8/4/14 7:08:01.000 AM kernel: PMAP: PCID enabled
8/4/14 7:08:01.000 AM kernel: Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
8/4/14 7:08:01.000 AM kernel: vm_page_bootstrap: 2009908 free pages and 70860 wired pages
8/4/14 7:08:01.000 AM kernel: kext submap [0xffffff7f80736000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000736000]
8/4/14 7:08:01.000 AM kernel: zone leak detection enabled
8/4/14 7:08:01.000 AM kernel: standard timeslicing quantum is 10000 us
8/4/14 7:08:01.000 AM kernel: mig_table_max_displ = 73
8/4/14 7:08:01.000 AM kernel: TSC Deadline Timer supported and enabled
8/4/14 7:08:01.000 AM kernel: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
8/4/14 7:08:01.000 AM kernel: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
8/4/14 7:08:01.000 AM kernel: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
8/4/14 7:08:01.000 AM kernel: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
8/4/14 7:08:01.000 AM kernel: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
8/4/14 7:08:01.000 AM kernel: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
8/4/14 7:08:01.000 AM kernel: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
8/4/14 7:08:01.000 AM kernel: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
8/4/14 7:08:01.000 AM kernel: calling mpo_policy_init for TMSafetyNet
8/4/14 7:08:01.000 AM kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
8/4/14 7:08:01.000 AM kernel: calling mpo_policy_init for Sandbox
8/4/14 7:08:01.000 AM kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
8/4/14 7:08:01.000 AM kernel: calling mpo_policy_init for Quarantine
8/4/14 7:08:01.000 AM kernel: Security policy loaded: Quarantine policy (Quarantine)
8/4/14 7:08:01.000 AM kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
8/4/14 7:08:01.000 AM kernel: The Regents of the University of California. All rights reserved.
8/4/14 7:08:01.000 AM kernel: MAC Framework successfully initialized
8/4/14 7:08:01.000 AM kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
8/4/14 7:08:01.000 AM kernel: IOAPIC: Version 0x20 Vectors 64:87
8/4/14 7:08:01.000 AM kernel: ACPI: System State [S0 S3 S4 S5]
8/4/14 7:08:01.000 AM kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
8/4/14 7:08:01.000 AM kernel: [ PCI configuration begin ]
8/4/14 7:08:01.000 AM kernel: AppleIntelCPUPowerManagement: Turbo Ratios 0046
8/4/14 7:08:01.000 AM kernel: AppleIntelCPUPowerManagement: (built 16:32:09 Aug 23 2012) initialization complete
8/4/14 7:08:01.000 AM kernel: console relocated to 0xf11000000
8/4/14 7:08:01.000 AM kernel: PCI configuration changed (bridge=16 device=4 cardbus=0)
8/4/14 7:08:01.000 AM kernel: [ PCI configuration end, bridges 13 devices 16 ]
8/4/14 7:08:01.000 AM kernel: FireWire (OHCI) TI ID 823f built-in now active, GUID a4b197fffeb860cc; max speed s800.
8/4/14 7:08:01.000 AM kernel: mbinit: done [96 MB total pool size, (64/32) split]
8/4/14 7:08:01.000 AM kernel: Pthread support ABORTS when sync kernel primitives misused
8/4/14 7:08:01.000 AM kernel: com.apple.AppleFSCompressionTypeZlib kmod start
8/4/14 7:08:01.000 AM kernel: com.apple.AppleFSCompressionTypeDataless kmod start
8/4/14 7:08:01.000 AM kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
8/4/14 7:08:01.000 AM kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
8/4/14 7:08:01.000 AM kernel: AppleIntelCPUPowerManagementClient: ready
8/4/14 7:08:01.000 AM kernel: BTCOEXIST off
8/4/14 7:08:01.000 AM kernel: wl0: Broadcom BCM4331 802.11 Wireless Controller
8/4/14 7:08:01.000 AM kernel: 5.106.198.19
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: No interval found for . Using 8000000
8/4/14 7:08:01.000 AM kernel: [IOBluetoothHCIController::setConfigState] calling registerService
8/4/14 7:08:01.000 AM kernel: rooting via boot-uuid from /chosen: C7847E6B-BACC-30CE-A0FF-373B28CD30DE
8/4/14 7:08:01.000 AM kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
8/4/14 7:08:01.000 AM kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK5065GSXF Media/IOGUIDPartitionScheme/Customer@2
8/4/14 7:08:01.000 AM kernel: BSD root: disk0s2, major 14, minor 2
8/4/14 7:08:01.000 AM kernel: Kernel is LP64
8/4/14 7:07:46.440 AM com.apple.launchd: *** launchd[1] has started up. ***
8/4/14 7:07:59.259 AM com.apple.launchd: (com.apple.powerd) Unknown value for key POSIXSpawnType: Interactive
8/4/14 7:07:59.259 AM com.apple.launchd: (com.apple.sandboxd) Unknown value for key POSIXSpawnType: Interactive
8/4/14 7:07:59.260 AM com.apple.launchd: (com.apple.usbmuxd) Unknown value for key POSIXSpawnType: Interactive
8/4/14 7:08:09.350 AM fseventsd: implementation_register_rpc: implementation_added_client() => 22
8/4/14 7:08:10.183 AM com.apple.UserEventAgent-System: 2014-08-04 07:08 UserEventAgent[11] (CarbonCore.framework) FSEventStreamStart: register_with_server: ERROR: f2d_register_rpc() => (null) (-21)
8/4/14 7:08:10.252 AM com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
8/4/14 7:08:10.252 AM com.apple.pfctl: No ALTQ support in kernel
8/4/14 7:08:10.252 AM com.apple.pfctl: ALTQ related functions disabled
8/4/14 7:08:10.270 AM UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
8/4/14 7:08:10.275 AM com.apple.launchd: (com.dcomplex.nvr[57]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:08:10.291 AM com.apple.launchd: (com.dcomplex.nvr[57]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:08:10.298 AM com.apple.launchd: (com.dcomplex.nvr[57]) posix_spawn("/com.dcomplex.nvr/DCNVR", ...): No such file or directory
8/4/14 7:08:10.299 AM com.apple.launchd: (com.dcomplex.nvr[57]) Exited with code: 1
8/4/14 7:08:10.299 AM com.apple.launchd: (com.dcomplex.nvr) Throttling respawn: Will start in 10 seconds
8/4/14 7:08:10.639 AM UserEventAgent: CertsKeychainMonitor: configuring
8/4/14 7:08:11.000 AM kernel: Waiting for DSMOS...
8/4/14 7:08:12.687 AM UserEventAgent: WirelessAirPortDeviceNameCopy(): no BSD interface name found for object 13571
8/4/14 7:08:12.687 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCCopyWiFiDevices:388 WiFi Device Name == NULL
8/4/14 7:08:13.000 AM kernel: macx_swapon SUCCESS
8/4/14 7:08:14.574 AM mDNSResponder: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
8/4/14 7:08:14.831 AM com.apple.launchd: (com.dcomplex.nvr) Throttling respawn: Will start in 6 seconds
8/4/14 7:08:15.000 AM kernel: Previous Shutdown Cause: 5
8/4/14 7:08:15.000 AM kernel: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
8/4/14 7:08:15.000 AM kernel: BCM5701Enet: Ethernet address 3c:07:54:52:01:80
8/4/14 7:08:15.000 AM kernel: AirPort_Brcm4331: Ethernet address 60:c5:47:22:d5:b7
8/4/14 7:08:15.000 AM kernel: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
8/4/14 7:08:15.000 AM kernel: IO80211Interface::efiNVRAMPublished():
8/4/14 7:08:15.550 AM com.apple.kextd: Can't load /System/Library/Extensions/MonitorControl_drv.kext - no code for running kernel's architecture.
8/4/14 7:08:15.587 AM com.apple.kextd: Load MonitorControl.drv failed; removing personalities from kernel.
8/4/14 7:08:16.000 AM kernel: DSMOS has arrived
8/4/14 7:08:18.705 AM com.apple.usbmuxd: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
8/4/14 7:08:19.589 AM mds: (Normal) FMW: FMW 0 0
8/4/14 7:08:19.644 AM com.apple.SecurityServer: Session 100000 created
8/4/14 7:08:20.833 AM com.apple.launchd: (com.dcomplex.nvr[80]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:08:20.833 AM com.apple.launchd: (com.dcomplex.nvr[80]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:08:21.003 AM WSDaemon: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
8/4/14 7:08:21.003 AM WSDaemon: kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
8/4/14 7:08:21.003 AM WSDaemon: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
8/4/14 7:08:21.003 AM WSDaemon: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/4/14 7:08:21.003 AM WSDaemon: kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
8/4/14 7:08:21.003 AM WSDaemon: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
8/4/14 7:08:24.140 AM fseventsd: implementation_register_rpc: implementation_added_client() => 22
8/4/14 7:08:24.140 AM com.apple.xpchelper.00000000-0000-0000-0000-000000000000: 2014-08-04 07:08 xpchelper[61] (CarbonCore.framework) FSEventStreamStart: register_with_server: ERROR: f2d_register_rpc() => (null) (-21)
8/4/14 7:08:28.000 AM kernel: Panic UI memory freed (0xd000)
8/4/14 7:08:30.836 AM com.apple.launchd: (com.dcomplex.nvr[82]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:08:30.836 AM com.apple.launchd: (com.dcomplex.nvr[82]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:08:31.416 AM com.apple.SecurityServer: Entering service
8/4/14 7:08:31.451 AM systemkeychain: done file: /var/run/systemkeychaincheck.done
8/4/14 7:08:31.498 AM mDNSResponder: D2D_IPC: Loaded
8/4/14 7:08:31.498 AM mDNSResponder: D2DInitialize succeeded
8/4/14 7:08:31.526 AM launchdadd: FAILURE: Could not send MIG reply: 0x10000003
8/4/14 7:08:32.262 AM UserEventAgent: ServermgrdRegistration cannot load config data
8/4/14 7:08:34.269 AM crsud: Error encountered - scheduling retry: Error Domain=CUErrorDomain Code=-1199 "The Internet connection appears to be offline." UserInfo=0x1003107b0 {NSLocalizedDescription=The Internet connection appears to be offline.}
8/4/14 7:08:34.458 AM airportd: _processDLILEvent: en1 attached (down)
8/4/14 7:08:34.000 AM kernel: in func createVirtualInterface ifRole = 1
8/4/14 7:08:34.000 AM kernel: Created virtif 0xffffff8012039000 p2p0
8/4/14 7:08:34.000 AM kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
8/4/14 7:08:34.500 AM UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
8/4/14 7:08:34.500 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
8/4/14 7:08:34.500 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
8/4/14 7:08:34.500 AM UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
8/4/14 7:08:34.500 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
8/4/14 7:08:34.510 AM UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
8/4/14 7:08:34.831 AM fseventsd: log dir: /.fseventsd getting new uuid: F4EF6F7F-23D4-4780-AC80-758253812626
8/4/14 7:08:35.023 AM UserEventAgent: get_backup_share_points no AFP
8/4/14 7:08:35.477 AM rpcsvchost: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
8/4/14 7:08:36.173 AM Firewall: cupsd is listening from :::631 proto=6
8/4/14 7:08:36.174 AM Firewall: cupsd is listening from 0.0.0.0:631 proto=6
8/4/14 7:08:36.278 AM loginwindow: Login Window Application Started
8/4/14 7:08:36.644 AM configd: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
8/4/14 7:08:36.644 AM configd: DHCP en1: INIT transmit failed
8/4/14 7:08:36.652 AM configd: network configuration changed.
8/4/14 7:08:36.670 AM configd: setting hostname to "OSXs-Mac-mini.local"
8/4/14 7:08:37.681 AM com.apple.SystemStarter: Starting ProTec6b Daemon
8/4/14 7:08:37.695 AM com.apple.SystemStarter: Starting HP IO Monitor
8/4/14 7:08:38.461 AM Nalpeirond6b: /Library/StartupItems/ProTec6b/Nalpeirond6b: daemon has successfully started
8/4/14 7:08:39.335 AM loginwindow: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
8/4/14 7:08:39.419 AM com.apple.launchctl.LoginWindow: com.apple.findmymacmessenger: Already loaded
8/4/14 7:08:39.419 AM com.apple.launchctl.LoginWindow: com.apple.store_helper: Already loaded
8/4/14 7:08:39.419 AM com.apple.launchctl.LoginWindow: com.apple.storeagent: Already loaded
8/4/14 7:08:39.545 AM com.apple.SecurityServer: Session 100003 created
8/4/14 7:08:39.547 AM loginwindow: Login Window Started Security Agent
8/4/14 7:08:39.612 AM SecurityAgent: Echo enabled
8/4/14 7:08:39.612 AM SecurityAgent: Echo enabled
8/4/14 7:08:40.000 AM kernel: EDID CEA Extensions not valid for audio [Revision ID]: 1 (minimum value: 3)
8/4/14 7:08:40.154 AM WindowServer: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
8/4/14 7:08:40.000 AM kernel: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,cde1,3c00]
8/4/14 7:08:40.923 AM com.apple.launchd: (com.dcomplex.nvr[139]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:08:40.923 AM com.apple.launchd: (com.dcomplex.nvr[139]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:08:41.075 AM netbiosd: Unable to start NetBIOS name service:
8/4/14 7:08:41.095 AM UserEventAgent: [11] error in getAndLockContext: open returned -1 (errno=2) file was /private/var/servermgrd//servermgr_certs.lock
8/4/14 7:08:41.098 AM UserEventAgent: [11] error in getAndLockContext: open returned -1 (errno=2) file was /private/var/servermgrd//servermgr_certs.lock
8/4/14 7:08:41.098 AM UserEventAgent: CertsKeychainMonitor: ready to process keychain & timer events
8/4/14 7:08:44.048 AM configd: network configuration changed.
8/4/14 7:08:44.075 AM root: sntp sendpkt: sendto error: No route to host. Couldn't send packet!
8/4/14 7:08:44.075 AM root: on_wire failed for server 0.0.0.17!
8/4/14 7:08:44.087 AM ntpd: proto: precision = 1.000 usec
8/4/14 7:08:45.426 AM com.apple.launchd: (com.apple.xprotectupdater[20]) Exited with code: 252
8/4/14 7:08:53.666 AM com.apple.launchd: (com.dcomplex.nvr[148]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:08:53.666 AM com.apple.launchd: (com.dcomplex.nvr[148]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:09:03.694 AM com.apple.launchd: (com.dcomplex.nvr[162]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:09:03.694 AM com.apple.launchd: (com.dcomplex.nvr[162]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:09:13.702 AM com.apple.launchd: (com.dcomplex.nvr[164]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:09:13.702 AM com.apple.launchd: (com.dcomplex.nvr[164]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:09:23.708 AM com.apple.launchd: (com.dcomplex.nvr[166]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:09:23.708 AM com.apple.launchd: (com.dcomplex.nvr[166]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:09:30.256 AM SecurityAgent: User info context values set for OSX
8/4/14 7:09:30.256 AM SecurityAgent: User info context values set for OSX
8/4/14 7:09:30.833 AM authorizationhost: Failed to authenticate user <OSX> (error: 9).
8/4/14 7:09:33.715 AM com.apple.launchd: (com.dcomplex.nvr[169]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:09:33.715 AM com.apple.launchd: (com.dcomplex.nvr[169]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:09:34.393 AM SecurityAgent: User info context values set for OSX
8/4/14 7:09:34.393 AM SecurityAgent: User info context values set for OSX
8/4/14 7:09:35.782 AM SecurityAgent: Login Window login proceeding
8/4/14 7:09:35.782 AM SecurityAgent: Login Window login proceeding
8/4/14 7:09:36.289 AM loginwindow: Login Window - Returned from Security Agent
8/4/14 7:09:36.325 AM loginwindow: USER_PROCESS: 39 console
8/4/14 7:09:36.551 AM com.apple.launchd.peruser.501: (com.apple.AirPortBaseStationAgent) Unknown value for key POSIXSpawnType: Background
8/4/14 7:09:36.552 AM com.apple.launchd.peruser.501: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
8/4/14 7:09:36.569 AM com.apple.launchctl.Aqua: load: option requires an argument -- D
8/4/14 7:09:36.569 AM com.apple.launchctl.Aqua: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
8/4/14 7:09:36.783 AM com.apple.launchd.peruser.501: (com.apple.launchctl.Aqua[171]) Exited with code: 1
8/4/14 7:09:37.270 AM UserEventAgent: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 16143
8/4/14 7:09:39.957 AM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
8/4/14 7:09:39.957 AM com.apple.dock.extra: 2014-08-04 07:09:39.956 com.apple.dock.extra[190:1a07] Could not connect the action buttonPressed: to target of class NSApplication
8/4/14 7:09:39.958 AM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
8/4/14 7:09:39.958 AM com.apple.dock.extra: 2014-08-04 07:09:39.957 com.apple.dock.extra[190:1a07] Could not connect the action buttonPressed: to target of class NSApplication
8/4/14 7:09:39.958 AM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
8/4/14 7:09:39.958 AM com.apple.dock.extra: 2014-08-04 07:09:39.957 com.apple.dock.extra[190:1a07] Could not connect the action buttonPressed: to target of class NSApplication
8/4/14 7:09:39.959 AM com.apple.dock.extra: Could not connect the action buttonPressed: to target of class NSApplication
8/4/14 7:09:39.959 AM com.apple.dock.extra: 2014-08-04 07:09:39.958 com.apple.dock.extra[190:1a07] Could not connect the action buttonPressed: to target of class NSApplication
8/4/14 7:09:43.774 AM com.apple.launchd: (com.dcomplex.nvr[200]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:09:43.925 AM com.apple.launchd: (com.dcomplex.nvr[200]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:09:46.936 AM com.apple.launchd.peruser.501: (com.akamai.single-user-client[218]) Bug: launchd_core_logic.c:4745 (26200):13
8/4/14 7:09:47.000 AM kernel: CODE SIGNING: cs_invalid_page(0x1000): p=217[GoogleSoftwareUp] clearing CS_VALID
8/4/14 7:09:49.903 AM com.apple.launchd.peruser.501: (com.apple.mrt.uiagent[207]) Exited with code: 255
8/4/14 7:09:49.907 AM com.akamai.single-user-client: netsession_mac(218,0xb038d000) malloc: *** auto malloc[218]: error: GC operation on unregistered thread. Thread registered implicitly. Break on auto_zone_thread_registration_error() to debug.
8/4/14 7:09:51.127 AM Nikon Message Center 2: [i] LaunchType changed: (Unknown) to User
8/4/14 7:09:51.137 AM Nikon Message Center 2: [i] LaunchType changed: User to LoginItems
8/4/14 7:09:53.596 AM [0x0-0x1e01e].LUTLoader: QPixmap::fromMimeSource: Cannot find pixmap "loading.png" in the mime source factory
8/4/14 7:09:53.698 AM DragThing: kCGErrorInvalidConnection: CGSGetWindowTags: Invalid connection
8/4/14 7:09:53.698 AM DragThing: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
8/4/14 7:09:53.934 AM MagicMenuHotKeyDaemon: Started
8/4/14 7:09:53.937 AM [0x0-0x1d01d].com.stuffit.MagicMenu: 2014-08-04 07:09:53.908 MagicMenuHotKeyDaemon[239:707] Started
8/4/14 7:09:54.000 AM com.apple.launchd: (com.dcomplex.nvr[248]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:09:54.043 AM [0x0-0x1e01e].LUTLoader: Reloading Profile...
8/4/14 7:09:54.043 AM [0x0-0x1e01e].LUTLoader: /Library/ColorSync/Profiles/Displays/Cinema Display-00000610-0000-921D-02FE-043100000000.icc
8/4/14 7:09:54.044 AM [0x0-0x1e01e].LUTLoader: Reloading Profile...
8/4/14 7:09:54.044 AM [0x0-0x1e01e].LUTLoader: /Library/ColorSync/Profiles/Displays/Cinema Display-00000610-0000-921D-02FE-043100000000.icc
8/4/14 7:09:54.070 AM Firewall: netsession_mac is listening from 127.0.0.1:9421 proto=6
8/4/14 7:09:54.073 AM Firewall: netsession_mac is listening from 0.0.0.0:49166 proto=6
8/4/14 7:09:54.074 AM com.apple.launchd: (com.dcomplex.nvr[248]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:09:54.109 AM com.apple.launchd.peruser.501: ([0x0-0x1e01e].LUTLoader[234]) Exited with code: 9
8/4/14 7:09:54.150 AM com.apple.launchd: (com.dcomplex.nvr[248]) posix_spawn("/com.dcomplex.nvr/DCNVR", ...): No such file or directory
8/4/14 7:09:54.152 AM com.apple.launchd: (com.dcomplex.nvr[248]) Exited with code: 1
8/4/14 7:09:54.152 AM com.apple.launchd: (com.dcomplex.nvr) Throttling respawn: Will start in 10 seconds
8/4/14 7:09:54.273 AM Nikon Message Center 2: [i] launching
8/4/14 7:09:54.347 AM Nikon Message Center 2: [i] activated with launch type[LoginItems]
8/4/14 7:09:54.349 AM Nikon Message Center 2: [i] infomation timer scheduled to date[2014-08-04 14:39:54 +0000]
8/4/14 7:09:55.210 AM ClamXavSentry: clamd not running. Now trying to launch it...
8/4/14 7:09:58.015 AM storeagent: ISSoftwareMap: <TIMEOUT> Returning NULL for updateRequestBodyData
8/4/14 7:10:04.184 AM com.apple.launchd: (com.dcomplex.nvr[256]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:10:04.202 AM com.apple.launchd: (com.dcomplex.nvr[256]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:10:09.256 AM DragThing: kCGErrorInvalidConnection: CGSGetWindowTags: Invalid connection
8/4/14 7:10:14.290 AM com.apple.launchd: (com.dcomplex.nvr[258]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:10:14.290 AM com.apple.launchd: (com.dcomplex.nvr[258]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:10:14.534 AM ClamXavSentry: clamd launched successfully. Continuing...
8/4/14 7:10:14.638 AM ClamXavSentry: scan email files
8/4/14 7:10:14.638 AM ClamXavSentry: I will quarantine infected files
8/4/14 7:10:14.640 AM ClamXavSentry: clamdconfEncoding: 4
8/4/14 7:10:14.961 AM sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/local/clamXav/bin/freshclam --log=/usr/local/clamXav/share/clamav/freshclam.log --on-update-execute=EXIT_1
8/4/14 7:10:24.297 AM com.apple.launchd: (com.dcomplex.nvr[272]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:10:24.297 AM com.apple.launchd: (com.dcomplex.nvr[272]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:10:27.991 AM Mail: Using V2 Layout
8/4/14 7:10:33.305 AM sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/sbin/chown -R clamav:clamav /usr/local/clamXav/share/clamav
8/4/14 7:10:33.616 AM sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 0775 /usr/local/clamXav/share/clamav
8/4/14 7:10:33.890 AM sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 0664 /usr/local/clamXav/share/clamav/bytecode.cld /usr/local/clamXav/share/clamav/clamav-1231aca56b0e7dd6019dfa30cc041de3 /usr/local/clamXav/share/clamav/daily.cld /usr/local/clamXav/share/clamav/freshclam.log /usr/local/clamXav/share/clamav/main.cld /usr/local/clamXav/share/clamav/mirrors.dat
8/4/14 7:10:33.905 AM sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/touch /usr/local/clamXav/share/clamav/freshclam.log
8/4/14 7:10:34.134 AM sudo: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod a+rw /usr/local/clamXav/share/clamav/freshclam.log
8/4/14 7:10:34.304 AM com.apple.launchd: (com.dcomplex.nvr[287]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:10:34.304 AM com.apple.launchd: (com.dcomplex.nvr[287]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:10:44.344 AM com.apple.launchd: (com.dcomplex.nvr[294]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:10:44.345 AM com.apple.launchd: (com.dcomplex.nvr[294]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:10:54.378 AM com.apple.launchd: (com.dcomplex.nvr[297]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:10:54.378 AM com.apple.launchd: (com.dcomplex.nvr[297]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:11:04.395 AM com.apple.launchd: (com.dcomplex.nvr[303]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:11:04.395 AM com.apple.launchd: (com.dcomplex.nvr[303]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:11:08.552 AM com.akamai.single-user-client: netsession_mac(218,0xb040f000) malloc: *** auto malloc[218]: error: GC operation on unregistered thread. Thread registered implicitly. Break on auto_zone_thread_registration_error() to debug.
8/4/14 7:11:14.402 AM com.apple.launchd: (com.dcomplex.nvr[304]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:11:14.402 AM com.apple.launchd: (com.dcomplex.nvr[304]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:11:15.000 AM kernel: AppleBCM5701Ethernet: 0 1 BCM5701Enet::replaceOrCopyPacket worked after N tries
8/4/14 7:11:24.409 AM com.apple.launchd: (com.dcomplex.nvr[305]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:11:24.409 AM com.apple.launchd: (com.dcomplex.nvr[305]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:11:34.417 AM com.apple.launchd: (com.dcomplex.nvr[306]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:11:34.417 AM com.apple.launchd: (com.dcomplex.nvr[306]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:11:34.417 AM com.apple.launchd: (com.dcomplex.nvr[306]) posix_spawn("/com.dcomplex.nvr/DCNVR", ...): No such file or directory
8/4/14 7:11:34.417 AM com.apple.launchd: (com.dcomplex.nvr[306]) Exited with code: 1
8/4/14 7:11:34.417 AM com.apple.launchd: (com.dcomplex.nvr) Throttling respawn: Will start in 10 seconds
8/4/14 7:11:44.423 AM com.apple.launchd: (com.dcomplex.nvr[311]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:11:44.423 AM com.apple.launchd: (com.dcomplex.nvr[311]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:11:54.445 AM com.apple.launchd: (com.dcomplex.nvr[312]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:11:54.445 AM com.apple.launchd: (com.dcomplex.nvr[312]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:12:04.453 AM com.apple.launchd: (com.dcomplex.nvr[315]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:12:04.453 AM com.apple.launchd: (com.dcomplex.nvr[315]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:12:14.459 AM com.apple.launchd: (com.dcomplex.nvr[316]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:12:14.459 AM com.apple.launchd: (com.dcomplex.nvr[316]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:12:24.466 AM com.apple.launchd: (com.dcomplex.nvr[322]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:12:24.466 AM com.apple.launchd: (com.dcomplex.nvr[322]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:12:34.472 AM com.apple.launchd: (com.dcomplex.nvr[332]) open("/com.dcomplex.nvr/out.log", ...): No such file or directory
8/4/14 7:12:34.472 AM com.apple.launchd: (com.dcomplex.nvr[332]) open("/com.dcomplex.nvr/error.log", ...): No such file or directory
8/4/14 7:13:58.447 AM fseventsd: event logs in /.fseventsd out of sync with volume. destroying old logs. (247 41 324)
8/4/14 7:13:58.447 AM fseventsd: log dir: /.fseventsd getting new uuid: 761E04A7-CFB5-4BFC-B213-309E40A5D809
8/4/14 7:13:16.000 AM bootlog: BOOT_TIME 1407161596 0
Why is the new boot time showing earlier than the line above?
Here is the report sent to Apple
Interval Since Last Panic Report: 7926297 sec
Panics Since Last Report: 4
Anonymous UUID: 38F4C41B-8F12-4441-AE52-4B858F3A9CB0
Mon Aug 4 07:14:18 2014
panic(cpu 2 caller 0xffffff8000584a70): "soclose: NOFDREF"@/SourceCache/xnu/xnu-1699.32.7/bsd/kern/uipc_socket.c:1048
Backtrace (CPU 2), Frame : Return Address
0xffffff80ef8b3e80 : 0xffffff8000220792
0xffffff80ef8b3f00 : 0xffffff8000584a70
0xffffff80ef8b3f50 : 0xffffff800059899f
0xffffff80ef8b3f70 : 0xffffff800023dbbc
0xffffff80ef8b3fb0 : 0xffffff8000820057
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: Macmini5,1 (Mac-8ED6AF5B48C039E1)
System uptime in nanoseconds: 295880553244
last loaded kext at 55243072417: com.apple.driver.AppleHWSensor 1.9.5d0 (addr 0xffffff7f8182b000, size 28672)
last unloaded kext at 248743176732: com.apple.driver.AppleUSBUHCI 5.1.0 (addr 0xffffff7f80b82000, size 65536)
loaded kexts:
com.mingjie.driver.AudioCapture 1
com.Logitech.Control Center.HID Driver 3.6.0
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AudioAUUC 1.59
com.apple.driver.ApplePlatformEnabler 2.0.5d3
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleUSBDisplays 323.3
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.filesystems.autofs 3.0
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.driver.IOBluetoothHIDDriver 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: Macmini5,1, BootROM MM51.0077.B10, 2 processors, Intel Core i5, 2.3 GHz, 8 GB, SMC 1.76f0
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364B54463531323634485A2D3147344B31
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364B54463531323634485A2D3147344B31
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE4), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: TOSHIBA MK5065GSXF, 500.11 GB
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8281, 0xfa113000 / 6
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc50c, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: hub_device, 0x0451 (Texas Instruments), 0x2046, 0xfd130000 / 4
USB Device: hub_device, apple_vendor_id, 0x9121, 0xfd131000 / 5
USB Device: Apple Cinema Display, apple_vendor_id, 0x921d, 0xfd131200 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd110000 / 3 -
I force shutdown my MacBook Pro and when I reopened my laptop, my files and apps are all gone.
I force shutdown my MacBook Pro by pressing the shutdown button for a long time and when I reopened my laptop, my files and apps are all gone.
When I reopened my laptop, it said that some files have been deleted or hidden (I don't know if it said hidden, I don't remember). my dock and wallpaper were set back to default.
This isn't my first time force shutting my MacbookPro.
How can I restore/recover back my stuff?
i heard time machine restores your stuff back.
And please don't tell me to go to apple because I have made an appointment with them but I'm still worried.
Please if you know anything about this please tell me anything you know.
Please help me.Given that you sound a nervous wreck and a neophyte in matters Mac, it would be safest that you put the Mac away, go take a chill pill, grab a bite, get some rest. Then take the Mac to its scheduled appointment with Destiny, er, the Apple Genius.
There's a good possibility of data loss and munging around unknowing, following instructions that will probably be hard to grasp will only increase the amount of damage. -
Hi
My Mac book pro is behaving strangely. I am not able to enter the Password and can't open any application/folder. To log-in I have to give forced shutdown. When ever I try to open any application the screen turns grey (some times) and the window pop up " --------- quit unexpectedly".
I updated the OS too from the available updates but the problem persists. I have reasonable amont of data in it, which definitely I do not want to loose.
Kindly let me know how can I come out of the above scenario?Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya -
Hi guys and gals
Have not used my macbook pro for couple of months and now she is frozen - opens to wallpaper on desktop of snow leopard but absolutely no response with mouse or track pad . Screen goes blank after 5 mins then the only response is from the power button . When pressed the screen lights up with window asking if i want to shut down or.....enter has no response . Only option is to force shutdown and restart yet this does not resolve issue.....back to square one!!!!
Help???If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
My macbook pro (10.6.8 version) the screen turns blue, can not operate, forced shutdown, I installed the windows 7 Home Basic version.
To fix your issue is too complicated and lengthy to go into all of it here, it will require the services of person very familiar and experienced with Mac's to first recover your data and then restore OS X back to a functional state, then hopefully achieve the goals you were attempting.
I advise you hire the services of a local Mac computer support technician experienced in these matters.
Have them look at your Wifi and computer backup proceedures in the process.
Good Luck. -
I keep getting a forced shutdown and then my mac sends a panic report
my Macbook pro has the lion OS. I have Kaspersky internet security. My mac book pro started acting slow a couple of months ago. Thats why I loaded the Kaspersky to it. It keeps doing a forced shutdown when I am online. I can be just reading news on Yahoo and go to shut down Safari and a screen comes down like someone was pulling a curtain down over the viewing screen. It tells me to hold the power button down until the computer shuts down. I can't do anything else until I shut it down. everything freezes up. When I power back up, it says that a kext releasing a surface root has corrupted the registry.
This only seems to happen when I am online.
What can I do to make this stop? I have contacted apple 3 times on this and they have tried to help by deleting files and emptying trash and it still continues. Ofcorse, it doesn't happen when I am on the phone with the Apple Tech. Just like my old car. Lol!I want to give an update on my issue.
I deleted my internet security from my Mac Pro and it started acting normal again. It seems that it was the Kaspersky internet security that was causing the problem. After contacting Kaspersky, The agent told me that they were having issues with their older software and he had me download the newest updated security. I'm not quite sure about their answer because updates were installed on a regular basis. Anyway, I will see if this works any better and if not, I won't hesitate to delete the software from my computer. I hope that this will help someone elce. "Thank You Melophage for your help." -
PiCked up a virus/malware please help me get rid of it. While browsing with Safari got pop up saying I won a prize. Click OK to find out what I won. Did not click Ok, but cannot close Safari without using forced shutdown. Powering down computer and restarting then selecting Safari brings up same prize window. Just installed Trend Microsoftware for Mac. It's scanning now. Don't think it will work.
If I open another on same iMac everything seems ok.
Any help would be greatly appreciated.
ThanksI am also running Lion and had the same problem: a persistent popup on top of a half-opened Safari window saying that I had won a prize and should click OK to claim it. If I forced Safari to quit, the same pages and popup menu would appear when I then reopened Safari. From what I can tell, the problem results simply from the fact that Safari in Lion defaults to auto-reopening web pages that were open when Safari last quit, including those suspicious pages that may have prompted the user to force-quit Safari in the first place. I solved the problem this way:
(1) After force-quitting Safari, I went to my user Library folder and found the Saved Application State folder within. I then found the folder for Safari (com.apple.Safari.savedState), opened it and deleted its contents. Now the next time I open Safari, there will be no pages to auto-reopen.
(2) Since this problem could happen again, I decided to disable the auto-reopen feature in Safari. I did this by highlighting the "com.apple.Safari.savedState" file and choosing the File-->Get Info command, and then in the Get Info box, I turned on the Locked checkbox. This prevents Safari from adding any files to this folder.
This solution has worked well for me, and it has the advantage of not requiring the user to reset Safari. It also preserves Lion's auto-reopen feature for all other applications.
I need to give credit to David Pogue for the information I used to solve this problem. He describes this procedure on page 169 of his book, Mac OSX Lion, the missing manual.
Steve -
Can I upgrade my version of Mavericks without being forced into Yosemite
Can I upgrade my version of Mavericks without being forced into Yosemite ?
Apparently, Yosemite breaks iMovie HD (a.k.a. iMovie 06). I am considering a new Macintosh with 10.9.1 I would like to go to 10.9.5.
ThanksYes. You can run the Mac OS X 10.9.5 combo updater manually.
(114891) -
Can't start weblogic Server -The server will force shutdown now
Hello Community ; ) , I hope i post this on the right topic if not pls advise me.
I'm working as a trainee by a company which wants to establish OIBEE.
I'm really new to this topic and hope i can get some help with my problems . Cause i stuck in many ways .
I installed Oracle OBIEE 11g and the latest Patch 11.1.1.7.1.
After changing the Oracle Logo in Oracle Home I restarted the Services, using Oracle WebLogic Server Administration Console.But it cant restart and stuck!
So i stopped all manual using commands like "./stopWebLogic.sh ". As I wanted to start it again i get some error messages. Can somebody advise me how to handle this problem ? I would be very grateful.
<Oct 29, 2013 12:09:31 PM CET> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in /app/oracle/product/OBIEE11.1.1.7/oracle_common/atgpf/modules/oracle.applcore.model_11.1.1/oracle.applcore.model.stub.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Oct 29, 2013 12:09:32 PM CET> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
<Oct 29, 2013 12:09:35 PM CET> <Warning> <Connector> <BEA-190155> <Compliance checking/validation of the resource adapter /app/oracle/product/OBIEE11.1.1.7/user_projects/domains/bifoundation_domain/servers/AdminServer/tmp/_WL_user/ESSAPP/z68zjr/stub-ess-ra.rar resulted in the following warnings:
The ra.xml <resourceadapter-class> class 'oracle.as.scheduler.adapter.ra.RAImpl' should implement java.io.Serializable but does not.>
<Oct 29, 2013 12:24:25 PM CET> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
<Oct 29, 2013 12:24:25 PM CET> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
<Oct 29, 2013 12:24:25 PM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>Hi VG,
thank u a lot for ur answer. But there are no files at the Admin Server boot.properties path.
and at the BI Server boot.properties path there is no security folder. Do u have any idea why i cant found anything at this directions ? Also I tried again the command "./startWeblogic.sh " and get a new error message which I post below. I am rlly worry about this. Is there maybe a way to reset the OBIEE and undo all changes ?
<Oct 30, 2013 10:00:47 AM CET> <Warning> <EJB> <BEA-010001> <While deploying EJB 'AsyncAdminService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Oct 30, 2013 10:00:47 AM CET> <Warning> <EJB> <BEA-010001> <While deploying EJB 'AsyncAdminService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Oct 30, 2013 10:00:48 AM CET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application em is not versioned.>
^C<Oct 30, 2013 10:39:50 AM CET> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
<Oct 30, 2013 10:39:50 AM CET> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
<Oct 30, 2013 10:39:50 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN> -
Web logic server is force shutdown Hyperion 11.1.2.3 instillation.
Hi All,
I installed and configured Hyperion 11.1.2.3 successfully(In Os Windows server 2008 R2, DB is Sql server 2005). After the Configuration of the all the products successfully i tested all the components are working fine.But after the system restart the web logic server is force shutdown.
I am trying to reconfigure the Hyperion products All the Application servers failed. Then i identified that the web logic server is shutdown. I am trying to start Web logic server but it auto aromatically force shut down state.
Can any one help me how to resolve this issue step by step.
I am waiting your Valuable Replay.
Regards
EPMA HyperionDocumentation - Introduction
Cheers
John
http://john-goodwin.blogspot.com/ -
I keep getting the following message on my phone "Sorry! The application Email (processcom.andriod.email) has stopped unexpectedly. Please try again" and there is a force shutdown button, which I push but keep getting the message. Any ideas how to make it go away so I can get my emails?
Have you installed any applications recently? A task killer maybe? You can try rebooting the phone and see if that helps.
-
I tried to reset my iphone5, the reset loading was okay, but after that there is other loading(the one that come everytime after shutting down), so its about 6-7 hours that my phone is stuck on this page. force shutdown didnt work.
There are many ways to do a reset on an iPhone so which one have you been trying that has got you to where you are now?
Maybe you are looking for
-
All of the sudden with an upgrade to Acrobat Reader 8, I'm getting an action cancelled error when opening PDFs or Docs with getURL from Flash. I've seen this topic posted in the forum, but didn't see where there was ever a fix addressed. I realize th
-
Stop/start of BW 7.0 system-- how to deal with deltas when moving instance?
Dear BW guru's, we are moving a BW 7.0 system to a new datacenter, where the R3 source systems remain the same. What should we consider when we want to stop the system, move it, and restart the next day, when the source systems cannot be stopped? Spe
-
Updating username and password via JDBC
Hello, Curious has anyone developed sample code that would do the following. 1. Using getConnection one passes in a username and passsword. 2. Let's say the the DB password passed is wrong but I want to update the users old password with the new pass
-
Save as archive disabled 3.04.
I'm running GarageBand and the Save As Archive option is disabled. I read the long thread about it, but it's still not working for me. I don't know what's meant by adding loops (the blue one), so maybe that's what's wrong. Anyway, I'd appreciate some
-
Hey, How to know number of rows and columns in alv grid are used.