Force Update to MBAM Server

After the Installation of the MBAM Agent on new Clients I would like to force an update to the Database. With Agent Version 2.0.5301.1 I could create a Dword Reg key called "NoStartupDelay" with the value 1 under HKLM\Software\Microsoft\MBAM.
After restarting the Service the Agent would send the encryption information to the MBAM Server.
With Agent Version 2.1.0117.0 this doesn't seem to work anymore. Is this a known error or is there a different way to do it?
Additional Information:
I follwed the description in this link http://technet.microsoft.com/en-us/library/dn505770.aspx
Modify MBAM Client Service Startup Delay
In addition to the MBAM Client wakeup and status reporting frequencies, there is a random delay of up to 90 minutes when the MBAM Client agent service starts on client computers. If you do not want the random delay, create a
DWORD value of NoStartupDelay under
HKLM\Software\Microsoft\MBAM, set its value to
1, and then restart BitLocker Management Client Service.
It always worked with the old Agent but doesn't anymore

Hi JackAB,
The specific paragraph you quoted is to delay the Client Service startup. Not the time to check in with the database. In the TechNet article "Evaluation MBAM 2.0", in the paragraph above
the one you quoted states:
Modify MBAM Client Status Reporting Frequency Settings
The MBAM Client wakeup and status reporting frequencies have a minimum value of 90 minutes when they are set using Group Policy. You can use the Windows registry to change these frequencies to a lower value on MBAM client computers to help speed up testing.
To modify the MBAM Client status reporting frequency settings:
1. Use a registry editor to navigate to HKLM\Software\Policies\Microsoft\FVE\MDOPBitLockerManagement.
2. Change the values for ClientWakeupFrequency and StatusReportingFrequency to 1 as the minimum client-supported value. This change causes the MBAM Client to report every minute.
3. Restart BitLocker Management Client Service.
Hope this helps,
David

Similar Messages

  • [svn:bz-4.0.0_fixes] 16148: Update config testsuite on 4.0. 0_fixes branch to force kill the app server before running any tests when the app server is Tomcat .

    Revision: 16148
    Revision: 16148
    Author:   [email protected]
    Date:     2010-05-17 06:40:40 -0700 (Mon, 17 May 2010)
    Log Message:
    Update config testsuite on 4.0.0_fixes branch to force kill the app server before running any tests when the app server is Tomcat. The regression runs were hanging on this branch when going to run the config suite because the Tomcat server isn't shutting down cleanly at the end of the MXUnit run. I believe this is an issue with the version of ActiveMQ we are using. Since I don't think we want to update ActiveMQ on this branch force killing the Tomcat server will workaround the problem.
    Modified Paths:
        blazeds/branches/4.0.0_fixes/qa/apps/qa-regress/testsuites/config/build.xml

    Hi,
    Thanks for the reply. I have tried this on another machine running the same version of Blackboard. It works fine.
    Only difference is that the machine that has the JVM crash is running on Fujitsu PrimePower and the OS is Solaris 9 (but twigged for PrimePower).
    The one where it runs and starts up successfully is running on SunFire (OS is Solaris 10).
    I am wondering if there is a problem with the JVM loading required libraries because of the OS being different versions.
    Any leads on this is welcomed. Thank you.
    Regards,
    Hon Peng
    ===================
    On Fujitsu Primepower
    SunOS 5.9 Generic_118558-33 sun4us sparc FJSV,GPUS
    the Dependencies for libjvm.so are as follows:
    ===================
    bash-2.05$ ldd -r libjvm.so
    libsocket.so.1 => /usr/lib/libsocket.so.1
    libsched.so.1 => /usr/lib/libsched.so.1
    libdl.so.1 => /usr/lib/libdl.so.1
    libCrun.so.1 => /usr/lib/libCrun.so.1
    libm.so.1 => /usr/lib/libm.so.1
    libthread.so.1 => /usr/lib/libthread.so.1
    libc.so.1 => /usr/lib/libc.so.1
    libnsl.so.1 => /usr/lib/libnsl.so.1
    libmp.so.2 => /usr/lib/libmp.so.2
    /usr/platform/FJSV,GPUS/lib/libc_psr.so.1
    =====================================
    On SunFire, Sun machine
    SunOS 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-280R
    the dependencies are different for the libjvm.so:
    =====================================
    bash-2.05$ ldd -r libjvm.so
    libsocket.so.1 => /lib/libsocket.so.1
    libsched.so.1 => /usr/lib/libsched.so.1
    libdl.so.1 => /lib/libdl.so.1
    libCrun.so.1 => /usr/lib/libCrun.so.1
    libm.so.1 => /lib/libm.so.1
    libthread.so.1 => /lib/libthread.so.1
    libc.so.1 => /lib/libc.so.1
    libnsl.so.1 => /lib/libnsl.so.1
    libmp.so.2 => /lib/libmp.so.2
    libmd5.so.1 => /lib/libmd5.so.1
    libscf.so.1 => /lib/libscf.so.1
    libdoor.so.1 => /lib/libdoor.so.1
    libuutil.so.1 => /lib/libuutil.so.1
    /platform/SUNW,Sun-Fire-280R/lib/libc_psr.so.1
    libm.so.2 => /lib/libm.so.2
    /platform/SUNW,Sun-Fire-280R/lib/libmd5_psr.so.1

  • How to force DMAgent to query server immediately

    We'd like to have possibility to invoke DMAgent's processing of OL commands programatically - is there any way how to do this? Our users use OL on PDAs and connect to mobile server using mobile phone. That means there's connection to server only during the synchronization and so the commands are frequently waiting for device processing for few days, even though I set the dmc frequency parameter to 30 seconds. Is there any command line argument which would force DMAgent to process server commands on demand?

    I have been using autosync. Withe selected publication items (10.3) It works ok. But i have some issues in publication level sync parameters and platform sync parameters. In the publication i have mentioned when 50 update records to sync and on platform i have mentioned when ac power is detected. Only when ac power detected triggers(On win32) doing as an experiments.
    Your problem should solve with auto sync. (But i have not seen any option to start modem connection within oracle lite. If it is available we can getrid of many issues. Because to use api i do not know java. im using .net)
    Another issue is that when autosync introduces the frequency of device read write error increased(WM5 PDA)im using a kingston 2gb micro sd. I raised this question earlier. But found little information. Then tried with FLUSH_AFTER_WRITE=true in polite but still the issue is there. I think for autosync we might need a reliable sd card. Otherthan that it works fine and client data is uploaded when ac 50 updated records in WM5 and when ac power detected in WIN32.

  • Can not make force-update="true" in orion-ejb-jar.xml

    if you make force-update="true" in the orion-ejb-jar.xml, even a simple entity bean can not be deploy to oc4j 9.0.3.
    can anybody tell me if it is a bug?
    Auto-deploying file:/D:/testdir/fromdbms/Project1/classes/ (No previous deployment found)... Country_EntityBeanWrapper2.java:1567: unclosed string literal
    if(com.evermind.server.ApplicationServer.DEBUG) debug("update COUNTRY set CODE = ?, NAME = ? where UNIQUEID = ?
    ^
    Country_EntityBeanWrapper2.java:1568: ')' expected
    PreparedStatement statement = connection.getCustomStatement("update COUNTRY set CODE = ?, NAME = ? where UNIQUEID = ?");
    ^

    I use jdeveloper 903 version to create only one entity bean, and set the force-update=true in the orion-ejb-jar.xml, when verify it, it is ok, when deploy it to the oc4j 903 version, it throws error message.
    you may try it using jdeveloper 9.0.3 version.

  • Intune is forcing updates and force restarting machines linked to it

    as of recently Intune has started forcing updates out overour onsite WSUS server and force restarting out machines we use a mixture of Windows 8 and windows 8.1 machines.  From looking at both group policy's and windows intune it does not look like
    any settings have changed. 
    are there any reason for this and can we control when our machines restart this is happening across all of our intune machines. 

    You can control when your machines receive updates and the reboot policy in the Agent Settings policy.  Please take a look at that.  If you still are encountering issues please contact support.  
    Thanks,
    Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

  • Create a new web application, how shall I update the file server.xml

    Hi,
    I will create a new web application, i.e named newApp. Then I create a file structure as follows:
    - <server-root>/newApp
    - <server-root>/newApp/WEB-INF
    - <server-root>/newApp/WEB-INF/classes
    Then I must tell the server that I have created a new web application. Then I must update my file server.xml, How shall I do this and where in the file shall I type in the new information?
    I use windows XP Pro, and Tomcat 4.1.27.
    My server.xml file looks like below:
    <!-- Example Server Configuration File -->
    <!-- Note that component elements are nested corresponding to their
    parent-child relationships with each other -->
    <!-- A "Server" is a singleton element that represents the entire JVM,
    which may contain one or more "Service" instances. The Server
    listens for a shutdown command on the indicated port.
    Note: A "Server" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <Server port="8005" shutdown="SHUTDOWN" debug="0">
    <!-- Comment these entries out to disable JMX MBeans support -->
    <!-- You may also configure custom components (e.g. Valves/Realms) by
    including your own mbean-descriptor file(s), and setting the
    "descriptors" attribute to point to a ';' seperated list of paths
    (in the ClassLoader sense) of files to add to the default list.
    e.g. descriptors="/com/myfirm/mypackage/mbean-descriptor.xml"
    -->
    <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
    debug="0"/>
    <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
    debug="0"/>
    <!-- Global JNDI resources -->
    <GlobalNamingResources>
    <!-- Test entry for demonstration purposes -->
    <Environment name="simpleValue" type="java.lang.Integer" value="30"/>
    <!-- Editable user database that can also be used by
    UserDatabaseRealm to authenticate users -->
    <Resource name="UserDatabase" auth="Container"
    type="org.apache.catalina.UserDatabase"
    description="User database that can be updated and saved">
    </Resource>
    <ResourceParams name="UserDatabase">
    <parameter>
    <name>factory</name>
    <value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
    </parameter>
    <parameter>
    <name>pathname</name>
    <value>conf/tomcat-users.xml</value>
    </parameter>
    </ResourceParams>
    </GlobalNamingResources>
    <!-- A "Service" is a collection of one or more "Connectors" that share
    a single "Container" (and therefore the web applications visible
    within that Container). Normally, that Container is an "Engine",
    but this is not required.
    Note: A "Service" is not itself a "Container", so you may not
    define subcomponents such as "Valves" or "Loggers" at this level.
    -->
    <!-- Define the Tomcat Stand-Alone Service -->
    <Service name="Tomcat-Standalone">
    <!-- A "Connector" represents an endpoint by which requests are received
    and responses are returned. Each Connector passes requests on to the
    associated "Container" (normally an Engine) for processing.
    By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
    You can also enable an SSL HTTP/1.1 Connector on port 8443 by
    following the instructions below and uncommenting the second Connector
    entry. SSL support requires the following steps (see the SSL Config
    HOWTO in the Tomcat 4.0 documentation bundle for more detailed
    instructions):
    * Download and install JSSE 1.0.2 or later, and put the JAR files
    into "$JAVA_HOME/jre/lib/ext".
    * Execute:
    %JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
    $JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
    with a password value of "changeit" for both the certificate and
    the keystore itself.
    By default, DNS lookups are enabled when a web application calls
    request.getRemoteHost(). This can have an adverse impact on
    performance, so you can disable it by setting the
    "enableLookups" attribute to "false". When DNS lookups are disabled,
    request.getRemoteHost() will return the String version of the
    IP address of the remote client.
    -->
    <!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8080 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8080" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="100" debug="0" connectionTimeout="20000"
    useURIValidationHack="false" disableUploadTimeout="true" />
    <!-- Note : To disable connection timeouts, set connectionTimeout value
    to -1 -->
    <!-- Define a SSL Coyote HTTP/1.1 Connector on port 8443 -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8443" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" scheme="https" secure="true"
    useURIValidationHack="false" disableUploadTimeout="true">
    <Factory className="org.apache.coyote.tomcat4.CoyoteServerSocketFactory"
    clientAuth="false" protocol="TLS" />
    </Connector>
    -->
    <!-- Define a Coyote/JK2 AJP 1.3 Connector on port 8009 -->
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8009" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" connectionTimeout="0"
    useURIValidationHack="false"
    protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
    <!-- Define an AJP 1.3 Connector on port 8009 -->
    <!--
    <Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
    port="8009" minProcessors="5" maxProcessors="75"
    acceptCount="10" debug="0"/>
    -->
    <!-- Define a Proxied HTTP/1.1 Connector on port 8082 -->
    <!-- See proxy documentation for more information about using this. -->
    <!--
    <Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
    port="8082" minProcessors="5" maxProcessors="75"
    enableLookups="true"
    acceptCount="100" debug="0" connectionTimeout="20000"
    proxyPort="80" useURIValidationHack="false"
    disableUploadTimeout="true" />
    -->
    <!-- Define a non-SSL legacy HTTP/1.1 Test Connector on port 8083 -->
    <!--
    <Connector className="org.apache.catalina.connector.http.HttpConnector"
    port="8083" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" />
    -->
    <!-- Define a non-SSL HTTP/1.0 Test Connector on port 8084 -->
    <!--
    <Connector className="org.apache.catalina.connector.http10.HttpConnector"
    port="8084" minProcessors="5" maxProcessors="75"
    enableLookups="true" redirectPort="8443"
    acceptCount="10" debug="0" />
    -->
    <!-- An Engine represents the entry point (within Catalina) that processes
    every request. The Engine implementation for Tomcat stand alone
    analyzes the HTTP headers included with the request, and passes them
    on to the appropriate Host (virtual host). -->
    <!-- You should set jvmRoute to support load-balancing via JK/JK2 ie :
    <Engine name="Standalone" defaultHost="localhost" debug="0" jmvRoute="jvm1">
    -->
    <!-- Define the top level container in our container hierarchy -->
    <Engine name="Standalone" defaultHost="localhost" debug="0">
    <!-- The request dumper valve dumps useful debugging information about
    the request headers and cookies that were received, and the response
    headers and cookies that were sent, for all requests received by
    this instance of Tomcat. If you care only about requests to a
    particular virtual host, or a particular application, nest this
    element inside the corresponding <Host> or <Context> entry instead.
    For a similar mechanism that is portable to all Servlet 2.3
    containers, check out the "RequestDumperFilter" Filter in the
    example application (the source for this filter may be found in
    "$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
    Request dumping is disabled by default. Uncomment the following
    element to enable it. -->
    <!--
    <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
    -->
    <!-- Global logger unless overridden at lower levels -->
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="catalina_log." suffix=".txt"
    timestamp="true"/>
    <!-- Because this Realm is here, an instance will be shared globally -->
    <!-- This Realm uses the UserDatabase configured in the global JNDI
    resources under the key "UserDatabase". Any edits
    that are performed against this UserDatabase are immediately
    available for use by the Realm. -->
    <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
    debug="0" resourceName="UserDatabase"/>
    <!-- Comment out the old realm but leave here for now in case we
    need to go back quickly -->
    <!--
    <Realm className="org.apache.catalina.realm.MemoryRealm" />
    -->
    <!-- Replace the above Realm with one of the following to get a Realm
    stored in a database and accessed via JDBC -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="org.gjt.mm.mysql.Driver"
    connectionURL="jdbc:mysql://localhost/authority"
    connectionName="test" connectionPassword="test"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="oracle.jdbc.driver.OracleDriver"
    connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL"
    connectionName="scott" connectionPassword="tiger"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!--
    <Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
    driverName="sun.jdbc.odbc.JdbcOdbcDriver"
    connectionURL="jdbc:odbc:CATALINA"
    userTable="users" userNameCol="user_name" userCredCol="user_pass"
    userRoleTable="user_roles" roleNameCol="role_name" />
    -->
    <!-- Define the default virtual host -->
    <Host name="localhost" debug="0" appBase="webapps"
    unpackWARs="true" autoDeploy="true">
    <!-- Normally, users must authenticate themselves to each web app
    individually. Uncomment the following entry if you would like
    a user to be authenticated the first time they encounter a
    resource protected by a security constraint, and then have that
    user identity maintained across all web applications contained
    in this virtual host. -->
    <!--
    <Valve className="org.apache.catalina.authenticator.SingleSignOn"
    debug="0"/>
    -->
    <!-- Access log processes all requests for this virtual host. By
    default, log files are created in the "logs" directory relative to
    $CATALINA_HOME. If you wish, you can specify a different
    directory with the "directory" attribute. Specify either a relative
    (to $CATALINA_HOME) or absolute path to the desired directory.
    -->
    <!--
    <Valve className="org.apache.catalina.valves.AccessLogValve"
    directory="logs" prefix="localhost_access_log." suffix=".txt"
    pattern="common" resolveHosts="false"/>
    -->
    <!-- Logger shared by all Contexts related to this virtual host. By
    default (when using FileLogger), log files are created in the "logs"
    directory relative to $CATALINA_HOME. If you wish, you can specify
    a different directory with the "directory" attribute. Specify either a
    relative (to $CATALINA_HOME) or absolute path to the desired
    directory.-->
    <Logger className="org.apache.catalina.logger.FileLogger"
    directory="logs" prefix="localhost_log." suffix=".txt"
    timestamp="true"/>
    <!-- Define properties for each web application. This is only needed
    if you want to set non-default properties, or have web application
    document roots in places other than the virtual host's appBase
    directory. -->
         <DefaultContext reloadable="true"/>
    <!-- Tomcat Root Context -->
    <Context path="" docBase="ROOT" debug="0"/>
    <!-- Tomcat Examples Context -->
    <Context path="/examples" docBase="examples" debug="0"
    reloadable="true" crossContext="true">
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="localhost_examples_log." suffix=".txt"
    timestamp="true"/>
    <Ejb name="ejb/EmplRecord" type="Entity"
    home="com.wombat.empl.EmployeeRecordHome"
    remote="com.wombat.empl.EmployeeRecord"/>
    <!-- If you wanted the examples app to be able to edit the
    user database, you would uncomment the following entry.
    Of course, you would want to enable security on the
    application as well, so this is not done by default!
    The database object could be accessed like this:
    Context initCtx = new InitialContext();
    Context envCtx = (Context) initCtx.lookup("java:comp/env");
    UserDatabase database =
    (UserDatabase) envCtx.lookup("userDatabase");
    -->
    <!--
    <ResourceLink name="userDatabase" global="UserDatabase"
    type="org.apache.catalina.UserDatabase"/>
    -->
    <!-- PersistentManager: Uncomment the section below to test Persistent
    Sessions.
    saveOnRestart: If true, all active sessions will be saved
    to the Store when Catalina is shutdown, regardless of
    other settings. All Sessions found in the Store will be
    loaded on startup. Sessions past their expiration are
    ignored in both cases.
    maxActiveSessions: If 0 or greater, having too many active
    sessions will result in some being swapped out. minIdleSwap
    limits this. -1 or 0 means unlimited sessions are allowed.
    If it is not possible to swap sessions new sessions will
    be rejected.
    This avoids thrashing when the site is highly active.
    minIdleSwap: Sessions must be idle for at least this long
    (in seconds) before they will be swapped out due to
    activity.
    0 means sessions will almost always be swapped out after
    use - this will be noticeably slow for your users.
    maxIdleSwap: Sessions will be swapped out if idle for this
    long (in seconds). If minIdleSwap is higher, then it will
    override this. This isn't exact: it is checked periodically.
    -1 means sessions won't be swapped out for this reason,
    although they may be swapped out for maxActiveSessions.
    If set to >= 0, guarantees that all sessions found in the
    Store will be loaded on startup.
    maxIdleBackup: Sessions will be backed up (saved to the Store,
    but left in active memory) if idle for this long (in seconds),
    and all sessions found in the Store will be loaded on startup.
    If set to -1 sessions will not be backed up, 0 means they
    should be backed up shortly after being used.
    To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
    and minIdleBackup all to -1, saveOnRestart to false, then restart
    Catalina.
    -->
    <!--
    <Manager className="org.apache.catalina.session.PersistentManager"
    debug="0"
    saveOnRestart="true"
    maxActiveSessions="-1"
    minIdleSwap="-1"
    maxIdleSwap="-1"
    maxIdleBackup="-1">
    <Store className="org.apache.catalina.session.FileStore"/>
    </Manager>
    -->
    <Environment name="maxExemptions" type="java.lang.Integer"
    value="15"/>
    <Parameter name="context.param.name" value="context.param.value"
    override="false"/>
    <Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
    type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/EmployeeAppDb">
    <parameter><name>username</name><value>sa</value></parameter>
    <parameter><name>password</name><value></value></parameter>
    <parameter><name>driverClassName</name>
    <value>org.hsql.jdbcDriver</value></parameter>
    <parameter><name>url</name>
    <value>jdbc:HypersonicSQL:database</value></parameter>
    </ResourceParams>
    <Resource name="mail/Session" auth="Container"
    type="javax.mail.Session"/>
    <ResourceParams name="mail/Session">
    <parameter>
    <name>mail.smtp.host</name>
    <value>localhost</value>
    </parameter>
    </ResourceParams>
    <ResourceLink name="linkToGlobalResource"
    global="simpleValue"
    type="java.lang.Integer"/>
    </Context>
    </Host>
    </Engine>
    </Service>
    </Server>

    To use servlets u have indeed to update your web.xml...Well I'm not sure this is relevant to your case anyway.
    You have to add a <servlet> element to this file.
    Something like this:
    <servlet>
    <servlet-name>blabla</servlet-name>
    <servlet-class>blablapackage.Blablaclass</servlet-class>
    <init-param>...</init-param>
    </servlet>
    Now this may not solve your problem. Make sure you refer to your servlets using their full qualified names.btw, just to be sure, what is your definition of "servlet"? (i mean: any java class or only javax.servlet.Servlet)

  • Webi scheduling error in BO 4.0 SP04 after security patch updates in windows server 2008 R2

    We are getting  below error in BO 4.0 SP04 Web Intelligence report scheduling after security patch updates in windows server 2008 R2
    while trying to invoke the method com.businessobjects.sdk.core.server.IServer.getServerContext() of an object returned from com.businessobjects.rebean.wi.impl.services.DocumentInstanceManagementServiceImpl.getServer(com.businessobjects.sdk.core.context.IContext, com.businessobjects.rebean.wi.model.engine.IDocumentInstance)
    We have reverted back security patch but still giving above scheduling problem in  BO 4.0 SP04 WebI and we can view and refresh report.
    Is there any way to fix the scheduling problem in BO 4.0 SP04 WebI?

    HI,
    Check SAP notes if they will help you.
    1934855 - Scheduled Web Intelligence documents fail with com.businessobjects.sdk.core.server Error
    1916443 - Scheduling Web Intellignce reports which are having long names to excel and pdf fails.
    1792921 - Unable to schedule Webi documents in Excel or PDF format

  • MBAM server issues connecting to SQL database

    Hi,
    I've recently setup and configured MBAM, however the Application Log on the MBAM server shows lots of the following errors:
    Event code: 100002
    Event message: SQL error occured
    Event time: 05/10/2011 3:55:55 PM
    Event time (UTC): 05/10/2011 7:55:55 AM
    Event ID: 85c2614c7ff44f91b511b228aa6063a4
    Event sequence: 16
    Event occurrence: 15
    Event detail code: 0
    Application information:
    Application domain: /LM/W3SVC/2/ROOT/MBAMComplianceStatusService-1-129622739405401050
    Trust level: Full
    Application Virtual Path: /MBAMComplianceStatusService
    Application Path: C:\inetpub\Malta BitLocker Management Solution\MBAM Compliance Status Service\
    Machine name: HZL-MAN-016
    Process information:
    Process ID: 780
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
    Exception information:
    Exception type: SqlException
    Exception message: Login failed for user 'DOMAIN\HZL-MAN-016$'.
    Request information:
    Request URL: 
    Request path: 
    User host address: 
    User: 
    Is authenticated: False
    Authentication Type: 
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Thread information:
    Thread ID: 3
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
    at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
    at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
    at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
    at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
    at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
    at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
    at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
    at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
    at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
    at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
    at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
    at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
    at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
    at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
    at System.Data.SqlClient.SqlConnection.Open()
    at Microsoft.MBAM.ReportingService.DataProcessor.ProcessStatusReportInfo(StatusInfoType reportInfo)
    Custom event details:
    Application: MBAMComplianceStatusService
    Sql Server: HZLSQL05
    Database: MBAM Compliance Status
    Sql ErrorCode: 18456
    Error Message: Login failed for user 'DOMAIN\HZL-MAN-016$'.
    Can anyone help ? The SQL server that hosts the MBAM databases shows the following logs:
             Login failed for user 'DOMAIN\HZL-MAN-016$'. [CLIENT: xxx.xxx.xxx.64]
    Thanks

    just noticed in the Details view of the Event 18456 on the SQL server that it references the master database, do I need to do anything to the master database to make this work ? Error below:
    +
    System
    Provider
    [ Name]
    MSSQLSERVER
    EventID
    18456
    [ Qualifiers]
    49152
    Level
    0
    Task
    4
    Keywords
    0x90000000000000
    TimeCreated
    [ SystemTime]
    2011-10-18T01:12:37.000000000Z
    EventRecordID
    1515127
    Channel
    Application
    Computer
    HZLSQL05.int.bgc-contracting.com.au
    Security
    [ UserID]
    S-1-5-21-1183060287-1205496975-829235722-104624
    EventData
    BGCCP\HZL-MAN-016$
    [CLIENT: 172.xxx.xxx.xxx]
    184800000E0000000900000048005A004C00530051004C00300035000000070000006D00610073007400650072000000
    Binary data:
    In Words
    0000: 00004818 0000000E 00000009 005A0048
    0008: 0053004C 004C0051 00350030 00070000
    0010: 006D0000 00730061 00650074 00000072
    In Bytes
    0000: 18 48 00 00 0E 00 00 00 .H......
    0008: 09 00 00 00 48 00 5A 00 ....H.Z.
    0010: 4C 00 53 00 51 00 4C 00 L.S.Q.L.
    0018: 30 00 35 00 00 00 07 00 0.5.....
    0020: 00 00 6D 00 61 00 73 00 ..m.a.s.
    0028: 74 00 65 00 72 00 00 00 t.e.r...

  • ORA-02070: Error when updating a SQL Server table thru an Oracle View

    I have a SQL Server table TIMESHEET which contains a number of VARCHAR and NUMERIC columns plus a DATETIME column.
    Only the DATETIME column is giving me trouble.
    On the ORACLE side I have a view which selects from the SQL Server table but in order to get the SELECT to work, I had to either put a CAST or TO_DATE function call around the DATETIME field
    Below is the relevant part of the 2 view definitions I have tried
    create view TIMESHEET as
    SELECT
    "TsKeySeq" as TS_KEY_SEQ,
    "EmployeeNo" as EMPLOYEE_NO,
    CAST("PeriodEnding" AS DATE) as PERIOD_ENDING,
    . . . (more columns - not relevant)
    FROM [email protected];
    An update to the view generates this message
    ORA-02070: database OLEMSQLPSANTDAS6 does not support CAST in this context
    create view TIMESHEET as
    SELECT
    "TsKeySeq" as TS_KEY_SEQ,
    "EmployeeNo" as EMPLOYEE_NO,
    TO_DATE("PeriodEnding") as PERIOD_ENDING,
    . . . (more columns - not relevant)
    FROM [email protected];
    An update to the view generates this message
    ORA-02070: database OLEMSQLPSANTDAS6 does not support TO_DATE in this context
    If I don't include either the TO_DATE() or CAST() then I get
    Select Error: ORA-28527: Heterogeneous Services datatype mapping error
    ORA-02063:preceding line from OLEMSQLSANTDAS6
    Does anyone have any idea how to update a SQL Server DATETIME column thru an ORACLE view?

    You can't cast accross heterogenious databases and there is no need to. HSODBC treats SQL Server DATETIME column as DATE. For example, I have SQL Server table:
    CREATE TABLE [Ops].[T_JobType](
         [JobType] [varchar](50) NOT NULL,
         [JobDesc] [varchar](200) NULL,
         [InsertDt] [datetime] NOT NULL CONSTRAINT [InsertDt_00000006]  DEFAULT (getdate()),
         [InsertBy] [varchar](128) NOT NULL CONSTRAINT [InsertBy_00000006]  DEFAULT (user_name()),
         [LastUpdated] [datetime] NOT NULL CONSTRAINT [LastUpdated_00000006]  DEFAULT (getdate()),
         [LastUpdatedBy] [varchar](128) NOT NULL CONSTRAINT [LastUpdatedBy_00000006]  DEFAULT (user_name()),
    CONSTRAINT [T_JobType_PK] PRIMARY KEY CLUSTERED
         [JobType] ASC
    )WITH (PAD_INDEX  = OFF, STATISTICS_NORECOMPUTE  = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS  = ON, ALLOW_PAGE_LOCKS  = ON, FILLFACTOR = 100) ON [DATA01FG]
    ) ON [DATA01FG]Now on Oracle side I do:
    SQL> desc "Ops"."T_JobType"@pbods
    Name                                      Null?    Type
    JobType                                   NOT NULL VARCHAR2(50)
    JobDesc                                            VARCHAR2(200)
    InsertDt                                  NOT NULL DATE
    InsertBy                                  NOT NULL VARCHAR2(128)
    LastUpdated                               NOT NULL DATE
    LastUpdatedBy                             NOT NULL VARCHAR2(128)
    SQL> select "InsertDt" from "Ops"."T_JobType"@pbods;
    InsertDt
    18-AUG-08
    09-OCT-08
    22-OCT-09
    18-AUG-08
    19-NOV-08
    SQL> SY.

  • Clients cannot update from WSUS server - error 8024400E

    Alright, so I'm troubleshooting our WSUS server and seem to be stuck. I am running WSUS 3.2.7600.226 on Server 2003.  The client I have been using for testing is Windows 7 x64, but we have this issue on all clients (XP, 7 x86, and 7 x64).  I started
    with an error of 800B0001 and after googling installed KB2720211 to fix it. Now I am getting error 8024400E on clients when I attempt to update. I followed a technet walkthrough and verified that my WSUS settings are all correct (at least regarding iis,
    registry, gpo settings, and file system permissions). I am able to download CAB files from the WSUS server by going to the proper address in a browser. Here is a snippet from my WindowsUpdate log on my client:
    2013-12-20 10:27:29:784 972 23ac AU #############
    2013-12-20 10:27:29:784 972 23ac AU ## START ## AU: Search for updates
    2013-12-20 10:27:29:784 972 23ac AU #########
    2013-12-20 10:27:29:785 972 23ac AU <<## SUBMITTED ## AU: Search for updates [CallId = {749E5CD5-F4DE-48FC-A691-3610EF622CE3}]
    2013-12-20 10:27:29:785 972 2bcc Agent *************
    2013-12-20 10:27:29:785 972 2bcc Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2013-12-20 10:27:29:785 972 2bcc Agent *********
    2013-12-20 10:27:29:785 972 2bcc Agent * Online = Yes; Ignore download priority = No
    2013-12-20 10:27:29:785 972 2bcc Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation'
    and RebootRequired=1"
    2013-12-20 10:27:29:785 972 2bcc Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2013-12-20 10:27:29:785 972 2bcc Agent * Search Scope = {Machine}
    2013-12-20 10:27:29:785 972 2bcc Setup Checking for agent SelfUpdate
    2013-12-20 10:27:29:785 972 2bcc Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
    2013-12-20 10:27:29:785 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2013-12-20 10:27:29:789 972 2bcc Misc Microsoft signed: Yes
    2013-12-20 10:27:29:794 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2013-12-20 10:27:29:797 972 2bcc Misc Microsoft signed: Yes
    2013-12-20 10:27:29:799 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2013-12-20 10:27:29:803 972 2bcc Misc Microsoft signed: Yes
    2013-12-20 10:27:29:808 972 2bcc Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2013-12-20 10:27:29:812 972 2bcc Misc Microsoft signed: Yes
    2013-12-20 10:27:29:821 972 2bcc Setup Determining whether a new setup handler needs to be downloaded
    2013-12-20 10:27:29:821 972 2bcc Setup SelfUpdate handler is not found. It will be downloaded
    2013-12-20 10:27:29:821 972 2bcc Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
    2013-12-20 10:27:29:823 972 2bcc Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
    2013-12-20 10:27:29:823 972 2bcc Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
    2013-12-20 10:27:29:835 972 2bcc Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
    2013-12-20 10:27:29:835 972 2bcc Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
    2013-12-20 10:27:29:852 972 2bcc Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
    2013-12-20 10:27:29:852 972 2bcc Setup SelfUpdate check completed. SelfUpdate is NOT required.
    2013-12-20 10:27:29:884 972 2bcc PT +++++++++++ PT: Synchronizing server updates +++++++++++
    2013-12-20 10:27:29:884 972 2bcc PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://wsusservername/ClientWebService/client.asmx
    2013-12-20 10:27:29:896 972 2bcc PT WARNING: Cached cookie has expired or new PID is available
    2013-12-20 10:27:29:896 972 2bcc PT Initializing simple targeting cookie, clientId = 488f3922-1a4e-4921-b015-25957eeb6500, target group = http://wsusservername, DNS name = mycomputer.domain.local
    2013-12-20 10:27:29:896 972 2bcc PT Server URL = http://wsusservername/SimpleAuthWebService/SimpleAuth.asmx
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: GetAuthorizationCookie failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: SOAP Fault: 0x000190
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: faultstring:Fault occurred
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: ErrorCode:InternalServerError(5)
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: Message:(null)
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/SimpleAuthWebService/GetAuthorizationCookie";
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: ID:9d989bf6-04e3-44a9-8ffd-f20bb997b3f0
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: Failed to initialize Simple Targeting Cookie: 0x8024400e
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: PopulateAuthCookies failed: 0x8024400e
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: RefreshCookie failed: 0x8024400e
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: RefreshPTState failed: 0x8024400e
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: Sync of Updates: 0x8024400e
    2013-12-20 10:27:29:902 972 2bcc PT WARNING: SyncServerUpdatesInternal failed: 0x8024400e
    2013-12-20 10:27:29:902 972 2bcc Agent * WARNING: Failed to synchronize, error = 0x8024400E
    2013-12-20 10:27:29:902 972 2bcc Agent * WARNING: Exit code = 0x8024400E
    2013-12-20 10:27:29:902 972 2bcc Agent *********
    2013-12-20 10:27:29:902 972 2bcc Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2013-12-20 10:27:29:902 972 2bcc Agent *************
    2013-12-20 10:27:29:902 972 2bcc Agent WARNING: WU client failed Searching for update with error 0x8024400e
    2013-12-20 10:27:29:902 972 1bc8 AU >>## RESUMED ## AU: Search for updates [CallId = {749E5CD5-F4DE-48FC-A691-3610EF622CE3}]
    2013-12-20 10:27:29:902 972 1bc8 AU # WARNING: Search callback failed, result = 0x8024400E
    2013-12-20 10:27:29:902 972 1bc8 AU # WARNING: Failed to find updates with error code 8024400E
    2013-12-20 10:27:29:902 972 1bc8 AU #########
    2013-12-20 10:27:29:902 972 1bc8 AU ## END ## AU: Search for updates [CallId = {749E5CD5-F4DE-48FC-A691-3610EF622CE3}]
    2013-12-20 10:27:29:902 972 1bc8 AU #############
    2013-12-20 10:27:29:903 972 1bc8 AU Successfully wrote event for AU health state:0
    2013-12-20 10:27:29:903 972 1bc8 AU AU setting next detection timeout to 2013-12-20 21:27:29
    2013-12-20 10:27:29:903 972 1bc8 AU Setting AU scheduled install time to 2013-12-21 10:00:00
    2013-12-20 10:27:29:903 972 1bc8 AU Successfully wrote event for AU health state:0
    2013-12-20 10:27:29:904 972 1bc8 AU Successfully wrote event for AU health state:0
    2013-12-20 10:27:34:498 972 2bcc Report REPORT EVENT: {2519DC64-E7F9-499B-A2F8-B58DA4A0C08A} 2013-12-20 10:27:29:902-0600 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed
    to detect with error 0x8024400e.
    2013-12-20 10:27:34:502 972 2bcc Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2013-12-20 10:27:34:502 972 2bcc Report WER Report sent: 7.6.7600.256 0x8024400e 00000000-0000-0000-0000-000000000000 Scan 101 Managed
    2013-12-20 10:27:34:502 972 2bcc Report CWERReporter finishing event handling. (00000000)
    I focused in on "GetAuthorizationCookie failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200" and did some googling which all points at Microsoft Office 2003 SP1 update as being the culprit, and I followed
    the instructions on a technet site to disable the update and am still getting the same error. I'm stumped at this point, and I thought I would post here in the hope that someone can help me before I end up just wiping it out and reinstalling (which I'm worried
    won't even solve it).

    I focused in on "GetAuthorizationCookie failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200" and did some googling which all points at Microsoft Office 2003 SP1 update as being the culprit, and I followed
    the instructions on a technet site to disable the update and am still getting the same error.
    While you're definitely on the right track, the Office2003SP1 update really has not been an issue since WSUS Service Pack 2 was released in October 2009 (and really, the Office2003SP1 update that was the cause of this was replaced long before that even,
    so you probably don't even have the defective update on your server).
    However, the error is generally associated with the presence of defective update(s) on the WSUS server, so the first thing to do is address any potential issues caused by a failed install of KB2720211.
    If the error still persists after verifying that all other aspects of the server are fully operational, review the list of not-Declined updates on your WSUS server and make sure that:
    All Expired updates are Declined (and then run the Server Cleanup Wizard and let it delete the expired updates).
    All approvals for older revisions have been removed (and then run the Server Cleanup Wizard and let it delete the older revisions).
    All approvals for superseded updates have been removed. (And then, when they report as 100% Not Applicable, decline them, and then run the Server Cleanup Wizard so that it can delete the files associated with those updates).
    Once all of the potentially problematic updates have been removed from the view of the Windows Update Agent, and if this error then persists, we can evaluate it from a more focused perspective.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

    When trying to install last update, receiving next errors:
    Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB3003057).
    Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978127).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2982998).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2993958).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3002885).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3010788).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2978121).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3006226).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3005607).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB2975331).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB3008627).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3011780).
    Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3003743).
    This problem reproduced on all my web-servers (Windows Server 2012 Std). How can I fix these problems

    Hi,
    Windows update error 0x80070020 can occur if a program is interfering with the automatic update process.
    Restart your computer or restart your computer in safe mode with network, then try to install the updates. Detailed information you may reference the link below(this applies also to Windows Server 2012 ):
    You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
    http://support.microsoft.com/kb/883825/en-us
    If the problem still exits, open Run, type %windir% and hit
    Enter, find a text file named WindowsUpdate, uploaded the log file.
    Best Regards,           
    Eve Wang

  • I can not update a Windows Server 2008 R2 with Software Update Group in SCCM2012

    Hi all,
    I got some problems with update deployments these days.
    I try to configure SCCM2012 to update 1 Windows Server 2008 R2 (with Hyper-V / This server is in a cluster)
    Actually i've 4 other Hyper-V servers and i would like to add one more in the cluster called Hyper-V5. To do that i need that all Hyper-V servers use the same Windows Updates.
    I created a collection for my Hyper-V servers and then a Software Update Group with all needed updates (checked the list of another HV-Server).
    I did a deployment on this collection using this new Software Update Group.
    I checked the Sofwtare Center's logs on the Hyper-V5 server and i saw that synchronization has a successfull state.
    But there is no updates installed or displayed in Sofwtare Center.
    Here is some screenshots : Oh no i can't post image because ... "Body text cannot contain images or links until we are able to verify your account." waiting to be verified since months.
    Thanks for your help.

    Hi,
    Have you try to run Software Updates Scan Cycle and Software Updates Deployment Evaluation Cycle Actions on the client? Please check ScanAgent.log and PolicyAgent.log to see whether the client received the updates deployment policy.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Email changes on iPad via IMAP are not updating on Exchange Server

    I have set up IMAP access to my company email from the iPad. Reason being so that I can manage emails (delete, move to folders etc) whilst working off-line.
    Seemed to work fine for a day or so but now any changes made via the iPad are not syncing and updating the Exchange Server once back on-line.
    Any hints?

    I see. okay, well, on my iphone with iOS 3.x I always saw similar issues. I had email on 2 Exchange servers, so one of the accounts had to be IMAP, and it never worked properly.
    Yes, it would mark emails as being read, etc, but anytime I moved or deleted an email, it would do so, but would also keep a copy on the original mailbox it was in. Basically the IMAP "Expunge" command wasn't properly being sent by the iPhone
    I submitted this as a bug to Apple via bugreporter.apple.com and they confirmed it. Whether it's fixed or not in iOS 4 I don't know as iOS 4 has the ability to use multiple Exchange accounts so I no longer need the IMAP.

  • TS3276 Yahoo! sent mail not updated in the server.

    I have an issue with Yahoo! Mail. When I'd sent email from my Mail from my mac book air, it can be sent but a copy is not updated in the server, thus when I view from the web or other device I can't see it as it is not updated. I've checked the "store sent msg in server" in the mail preference.
    I don't this issue with exchange and gmail.
    Thanks

    Right that is how the  POP email protocol works. If you want all mail sent and received to always be on the Mail Server then you have to use a mail provider that allows, uses, either IMAP or MS Exchange.

  • Stop pre from trying to force update to 1.3.1?

    So like most other posts after 1.3.1 was dumped on the unsuspecting populace, I updated, saw none of my major bugs fixed, introduced only worse ones, and I flattened my phone back to restore back to 1.2.1 until palm gets their act together (hopefully).  I spared my wife the woes of upgrade after she saw how bad it made my phone react, but almost immediately hers began trying to force her to update, and a few days later me too. Even worse we couldn't get it to stop trying.
    I need to know how to stop this incessant nagging until I actually see some positive result from attempts to upgrade to non-buggy software - I'm afraid im going to accidentally let it upgrade and have my phone paralyzed/unuseable again on 1.3.1.  What can we do to stop the forced upgrade other than keep telling it "upgrade me later" at every charge?
    Post relates to: Pre p100eww (Sprint)

    Ok, now I'm pretty much p*ssed at palm...  So at some point over night it decided to auto-update itself without asking prior to me removing patches and everything else, so in essence now my phone is completely hozed - again.  So now not only are all my patches gone that actually made the phone usable, I get the joy of 1.3.1 freezing up my phone every 2 seconds, yahoo/msn/communicator are all broken, and I need to flatten the phone yet again (and this time doing the recommended killing of UpdateManager).
    This is really disappointing that the community takes up Palm's shortcommings in fixing problems and adding functionality they're lacking, only to have Palm come along and completely screw them up.  Palm is well aware of the community fixing their inability/inactions through homebrew, but still choose to force updates that can cripple the software automagically. They need to learn to co-exist, and not hard-handedly update when homebrew is present!  This will just continue to fracture their community as they've been doing already.
    No matter how good linux itself has become, vendors like Palm can still screw it up with buggy java stacks and poor overall software implementation.

Maybe you are looking for

  • Pre - Low battery alarm and battery status don't match.....

    I am a Volunteer here, not employed by HP. You too can become an HP Expert! Details HERE! If my post has helped you, click the Kudos Thumbs up! If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you

  • How many different ways of dynamically displaying a text?

    Hi folks, I've been assigned to work on the following: The SapScript form on which I am supposed to work, currently has hard coded text with some variables such as name of the customer, order number, special info, etc, coming from the driver program.

  • Tree Render/Editor problem

    Hi, I have a JTree with a special renderer and editor that allows me to display a JCheckBox in the tree nodes (leaf nodes only). I'm having a problem where if the user clicks/unclicks the checkbox in the tree node, the treenode becomes unselected (Th

  • IPod Photo Transfer Error

    I have the iPod Photo and the newest version of iTunes and iLife 05'. I have more Photos in iPhoto than i have music in iTunes so transfering Photos to my iPod Photo is nothing new. But for some reason I imported a new batch of photos in to iPhoto as

  • Actual Profitablity of an article

    Dear experts, Please go through the problem mentioned below PROBLEM FOR ACHIEVING ACTUAL PROFITABILITY Background In case of Purchase Orders made for articles to be imported, at the time of receipt of the import documents the following operations are