Forced Authorization Code CCME

I'd like to know How May I apply some kind of authorization code in cisco callmanager express. Thanks

If I read CCME guide correctly, it does not support authorization code. You can use COR to do basic call restriction.

Similar Messages

  • Compile all "in use" Forced Authorization Codes

    Good morning. I'd like to compile a report of all in use Forced authorization codes. We'd like to compare our current available codes to that of which is in use. I've gone into call manager and looked around for a default function to export as csv all accounts, but there is nothing available. Does this require a sql query? If so, does anybody have the code to do so? Thanks to all in advance.

    Try this link for more information
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00803f3af7

  • Forced Authorization Code For Cisco SIP Phone 3905

    Hi Team,
    Can i configure  Cisco SIP Phone 3905 to use Forced Authorization Code ? I am using Call Manager 9.X.
    Regards,
    Praful Sartape

    Hi Praful,
    Yes you right for CME but for CUCM some sip phones supports FAC , as far as 3905 is concerned it supports FAC .
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/3905/8_6/english/admin_guide/IP05_BK_CDEEDD7F_00_admin-guide-3905_chapter_0101.html#IP05_RF_A5029279_00
    I didnt find link for CUCM 9.x but that above link will help.
    And also check this thread- https://supportforums.cisco.com/thread/2125452
    Rate all the helpful post.
    Thanks
    Manish

  • Forced Authorization Codes and Annunciator?

    Hello everybody.  This is my first community question so hopefully it is not redundant,  I have searched high and low for an answer to this but was unable to find anything definitive.
    We are currently in the process of implementing FAC codes to account for long distance charges in some of our departments.  If possible, my boss would like the there to be a spoken announcement that directs the caller to input their authorization code instead of the 3 beeps that you usually hear.  
    Is it possible to do this with CUCM?
    Thanks!

    Thank You.  My assumption is that FAC codes are the only built-in way to authenticate and account for users placing LD and INTL calls within CUCM without relying on 3rd party software?
    We previously had the accounting taken care of for us by our SP (at&t) but once we move our outbound calls to their SIP trunk (IPFlex) they will not provide this for us any longer and will only account for INTL of off-net calls.

  • Client matter code and forced authorization code.

    what's the difference between these two? It seems they are same. Call the number and enter the code, otherwise you can not complete the call. Thanks

    CMC and FAC serves two diff functions. Its true that you enter the wrong code, you cannot complete the call. CMC's purpose is to generate a billing record for every call placed to a particular client, mostly used by businesses who bill back to their clients, based on the number of calls made. FAC on the other hand (even though generates records in CDR) is to block access to a particular calling pattern. The same CMC may be entered for any of the route patterns that are enabled with CMC. The same FAC may be entered for those route patterns whose authorization level is = or < the authorization level of the FAC itself.
    So if i have two FACs with auth levels 20 and 30, and if i have FAC enabled on long distance (min auth level 20) and international route patterns (min auth level 30) , i can enter the FAC with auth level 30 for both long distance and international patterns for the call to go through.
    With FACs, IPT admin usually have to allocate the code on a per user basis. User 1 doesnt know User2's FAC. With CMC, its usually used by a group of agents who possibly makes a lot of outbound calls to their clients and the code is distributed among users. Each code represents a particular client, so billing reports (CDR) can be pulled at the end of the month based on code and bill that back to client.
    HTH
    Sankar
    PS: please remember to rate posts!

  • Is FAC(force authorization codes) supported on BE3000 ?

    i am currently working with a customer who has this system installed and they requested that they have pin codes for outbound calling .
    is there anyway i can have this pin feature set up either on the be3000 or the voicegateway cisco 2911 which is configured as a cube router and is handling all the call routing for  dial-peers .
    any information or assistance will be greatly appreciated . thanks

    Jzhang ,
    Here are the configs for configuring FAC on sip trunk router
    aaa new-model
    aaa authentication login default local
    aaa authentication login sdm_vpn_xauth_ml_1 local
    aaa authentication login h323 local
    aaa authorization exec default local
    aaa authorization exec h323 local
    aaa authorization network sdm_vpn_group_ml_1 local
    aaa authorization network h323 local
    application
    service clid_authen_collect
    param uid-len 4
    param pin-len 4
    create the username and password
    upload the WAV FILES
    enter_account.au
    enter_pin.au
    dial-peer voice 11 voip
    service clid_authen_collect
    destination-pattern .T
    session protocol sipv2
    session target ipv4:( call manager ip )
    session transport udp
    incoming called-number .T
    dtmf-relay rtp-nte cisco-rtp sip-notify sip-kpml
    codec g711ulaw
    no vad
    dial-peer voice 10 pots
    destination-pattern 9.T
    no digit-strip
    port 0/2/0
    forward-digits 7

  • UC560 Forced Authorization Codes (FAC)

    Hi All,
    Has anyone gotten FAC to work with the UC560? The box only crashing when the voip is enabled. When i shutdown the voip it makes the calls successfully.
    can help is greatly appreciated
    here is the configuration
    Place the files in flash enter_account.au and enter_pin.au
    aaa authentication login default local
    aaa authentication login sdm_vpn_xauth_ml_1 local
    aaa authentication login h323 local
    aaa authorization exec default local
    aaa authorization exec h323 local
    aaa authorization network sdm_vpn_group_ml_1 local
    aaa authorization network h323 local
    application
    service clid_authen_collect
      param uid-len 3
      param pin-len 6
    dial-peer voice 50 voip
    service clid_authen_collect
    destination-pattern 9[2-8]......
    session target ipv4:192.168.20.1
    incoming called-number 9[2-8]......
    dtmf-relay h245-alphanumeric
    codec g711ulaw
    no vad
    dial-peer voice 100 pots
    destination-pattern 9[2-8]......
    preference 1
    port 0/1/0
    forward-digits 7

    Hello Andrian,
    There are a few things I noticed, not sure if they are just left out, or not configured.
    Your config does not have any usernames/passwords configured, and the dial-peer is pointing to the CME address.  Here is the info I found, with the steps to configure FAC.
    https://supportforums.cisco.com/docs/DOC-9795/
    application
    service clid_authen_collect
      param uid-len 3
      param pin-len 3
    aaa new-model
    aaa authentication login h323 local
    aaa authorization exec h323 local
    aaa authorization network h323 local
    username 201 password 123
    username 201 autocommand exit
    username 202 password 321
    username 202 autocommand exit
    dial-peer voice 5500 voip
    description International Calls
    service clid_authen_collect
    destination-pattern 9011.T
    session target ipv4:10.1.1.1
    incoming called-number 9011.T
    dtmf-relay h245-alphanumeric
    codec g711ulaw
    no vad
    Thank you,
    Darren

  • Mobile 8.1 on iphone will not work with Force Authorization Code

    Hi All,
    not sure if you guys encounter this, my environment is using FAC to control IDD calls. It works perfectly on my desk phone, but on my mobile 8.1, it's not working.
    when i try to dial to overseas number, it wouldnt prompt me for the FAC code and it will just "call failed" after a while. May i know if there are any solution to this?

    Hi Mike,
    In my opinion you have a routing problem. Please check if a VPN client knows the route to the other VPN client. Print route on a VPN laptop. Check gateway for the given IP range (default or static route).
    Then on your internal routing equipment you must have route for your VPN ip range configured.
    If I'm not wrong you cannot ask your VPN box to route traffic directly between 2 established tunnels. It must first go outside first tunnel and then revert back to VPN concentrator and enter second tunnel.
    Signaling differs from RTP because it goes through the SIP proxy and not p2p, so that's why it rings.

  • Forced Authorization Codes in CME

    Hi,
    My company is migrating our telephony system from Mitel to CME and one of the features that we need to have in CME is FAC. Making some research I have found a workaround to use FAC  with UC500. My question is:
    can I use this same configuration with CME? I already have the audio files, but I don't have the script.
    the link where I found the workaround is this :  https://supportforums.cisco.com/docs/DOC-9795/#Can_UC500CME_be_configured_to_prompt_a_caller_for_a_PIN_before_placing_a_call
    Does anybody know of a method to enforce FAC with CME?
    Thanks

    I think I found the script. It seems that the script is compiled into the image. It authenticates using (ani, dnis) for (account, password). If that fails, it collects account and pin number, then authenticates using (account, pin). The script's name is Clid_authen_collect.tcl.
    The last thing  to know now, is where can I configure each user's PIN number.
    The link to see the script is: http://www.cisco.com/en/US/docs/routers/access/as5350/software/feature/guide/pull_ivr.html#wp1021162
    Any help will be much appreciated.

  • Assigning authorization code to a directory number

    Hello,
    I have a challenge and i will like your assistance.
    I have been aske to assign the individual force authorization code to the users' directory number, how possible is it? If possible how can it be done. I have a the CUCM version 7.1.5.....
    Thanks and regards

    FACs are forced on route patterns and not DNs. FACs are the build individually and not assigned to specific user and anyone who knows them can use them. What is the purpose for assigning them to DNs?
    Sent from Cisco Technical Support iPhone App

  • If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes?

    I have two questions...
    1) If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes? (because I don't have them)
    2) Has anyone ever seen anything like this before on their computers?
    The Apple Genius' were stumped by my laptop issues and said they'd never seen anything like it before and recommended I did a clean install. Below you can see my trash bin, and if you look at the "Empty" button it reads "N201" and then there's the "N39" to the left of it. You can also see these numbers over by the folder area--"SD5, SD6, SD7." But that's not all...
    When I right click on items I see the numbers again. Instead of "Open with" I get "N152" and there's an "N35" and "LB1" towards the bottom.
    I have no idea what's going on so I'm just going to do a clean install on my machine but I don't want to lose my apps. I don't have the original install DVDs for them anymore. If you have any suggestions please let me know. Thanks!

    You don't lose them.  You can always redownload them from the app store after you log back in with your Apple ID.
    "Buy, download, and even redownload.
    You can install apps on every Mac you use and even download them again. This is especially convenient when you buy a new Mac and want to load it with apps you already own."

  • How do I install SC2 on my Mac without authorization code?

    I purchased a full version SC2 for my Mac, but as I understand it Adobe no longer supports this product so how can I install it without the authorization code?

    Acquire the installation files and serial number from the page linked below:
    CS2: Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • Please help-I was just informed I cant activate my CS software through Adobe?!!! What a pisser-I lost my desktop to a virus, I got a new one and refuse to ever go online with it. I put Photoshop in, it wants an authorization code that Adobe says "CS is to

    Please help-I was just informed I cant activate my CS software through Adobe?!!! What a pisser-I lost my desktop to a virus, I got a new one and refuse to ever go online with it. I put @Photoshop in, it wants an authorization code that Adobe says "CS is too old so please go to our forum for help"... So I am here Ladies and Gentlemen. I really need help on how to reactivate my software and without the use of the internet (last time I tried online, ended up doing over the phone which is no longer offered...) that cost me several hundred to begin with-I am upset @Adobe won't activate it-why? I don't know. But please, if someone out there knows what I can do to overcome this, I would be very grateful. Thank you for all help and taking the time to reply.
    Peace, John Shea

    it's your lucky day.  you can upgrade to ps cs2 free.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • How do I get an Authorization Code for CS2?

    I just did a clean install of Windows 7 Professional from XP. Went to install Creative Suite 2 Premium, all 4 disks install fine, but no way to register it... and it will run for 30 days without and Authorization Code. I chated with Adobe and they sent me here! So how do I now get an Authorization Code or bypass this, this was an expensive software to just scrap... I have the Serial # and the activation # !!!

    Error: Activation Server Unavailable | CS2 or older products, Acrobat 7
    Mylenium

  • I need help getting new authorization codes for digital copies

    I need help getting new authorization codes for digital copies of movies. Can someone help me out?

    There's a lot of results in Google when you search for this but unfortunately refreshing the page doesn't seem to generate a different code anymore. Mine also says already redeemed

Maybe you are looking for

  • Help needed for translation of custom objects

    Hi All, We are currently in the process of upgrading from 11i to R12.1.3. We have a lot of custom reports and forms which needs to be translated based on language preference set at user level. The approach we have taken is as follows: 1. Created one

  • DVI question - not recognizing monitor

    I just bought a new lG L203WT monitor and I get nothing when I hook it up to my MPB. When I hook it up the following way it works fine: Apple DVI to VGA adaptor -- provided VGA to DVI cable -- DVI in on monitor -- RGB input selection on monitor. Its

  • How do I write a macro that would look for a string in an entire column

    how do I write a macro that would look for a string in an entire column. If the string is found, it will copy that entire row to a new sheet in that same file? I want to look in an entire column lets say "C" for different strings of numbers like 246,

  • Facebook icon wont go

    I have a curve 8520 and have this facebook icon at the top of my scrEen that won't go away, I checked and re-checked my fb account, did a battery pull and its still there, any suggestions? Solved! Go to Solution.

  • Made new html page, I cannot find an pactual font size

    Doing DW in a book, Lesson 1 made a html page "two col fixed header footer" There is a text size, an h1, h2 & <p> text size and it is 100% in the body, and 100% in the header, and after lesson #1, it is 90% in the main content, however of what?  I we