Forced to use Clear Text Passwords for OD binding

Running a Tiger Server 10.4.11 as OD master with one Replica. When binding clients to server in Directory Access/LDAPv3, If I "disable Clear Text Passwords," the users can not login. Uncheck this option, everything works fine. Non "Clear Text" passwords used to work, stopped about two weeks ago. If I bind to the Replica, I can disable clear text. Not sure where to look to see what broke.

Did your SSL cert expire ?
Any 10.5 clients ? If so, see
http://www.afp548.com/article.php?story=20071203011158936

Similar Messages

  • I've been using a master password for years. Today I noticed that it had been cleared. What could cause this?

    I've been using a master password for years. I also use Sync. Today I wanted to look up one of my saved passwords. When I went to do this I noticed that Firefox was no longer set to use a master password. I'm afraid that I may have been hacked, or that something else happened (recent Firefox update?) that caused the use of the master password to be disabled.
    I have not yet checked my other Synced computers to see if their master passwords have also been turned off.
    I have re-enabled the master password feature on this computer.
    On this particular computer, I've had a long-standing issue where Firefox "Help>About Firefox" always shows that I need to "Restart to Update". This means that I cannot use "Help>About Firefox" to check for and install the latest version. I need to download Firefox manually and update by running the installer.

    Hi,
    You can try to '''Clear Now''' the '''Active Logins''' with '''Time range to clear''' set to '''Everything''' via '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History Clear Recent History]. Alternatively via '''Tools''' ('''Alt''' + '''T''') > '''Options''' > [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Advanced] > '''Encryption''' > '''Security Devices''', select '''Software Security Device''' and choose '''Log Out'''. You can then restart Firefox and check.
    If the problem persists you can reset Firefox and start afresh.
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    If you would like to take a listing of the add-ons, changed preferences/settings etc. to quickly replicate the previous profile, please '''Copy all to clipboard''' (on the left of the reset button), and paste it into MS Office Excel, or OpenOffice/LibreOffice Calc, or notepad. However, it would be a good idea to check for the existence of the issue immediately after the reset.
    For the update error, please try searching for all instances of '''updates.xml''', open the containing folder to make sure it belongs to Firefox/Mozilla (path) and delete all instances of the file along with the '''updates''' folder.

  • Options to avoid Clear-Text Password in Business Objects 4.1 deployed Webi and CR 2013 reports

    We would like to avoid bundling clear-text passwords into each Webi and CR 2013 report in BOE 4.1 .   Could you recommend some alternatives to not embedding clear-text passwords in Webi and CR 2013 reports?  Thanks!

    Hello Kenneth,
    I have few options for you:
    Option 1:
    For BO XI 3.1, the Schedule Manager is a tool to help you manage the database logon information of Crystal Report documents in a BusinessObject Enterprise system. You can use the tool to update the logon information for a particular Crystal Report document, as well as looking for other Crystal Report documents that use the same database and update them in batch.
    As per my knowledge, there is no such tool exists for BI 4.0/4.1. Still I'd suggest you to test it in your TEST environment. I am sure it will work for BI 4.0 as well.
    You can download it on below portal.
    BusinessObjects Enterprise XI Schedule Managerhttp://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80af7965-8bdf-2b10-fa94-bb21833f3db8
    Option 2:
    When doing migration, from one environment to the next, you can setup overrides, within the Promotion Management portion of CMC, that will automatically make changes to the various reports for you, without needing to utilize the external tool to do that.
    Here's a nice list of KBA's for the BI 4.0 UMT (Upgrade Management Tool) & Promotion Management:
    http://wiki.sdn.sap.com/wiki/display/BOBJ/BI4+Upgrade+and+Promotion+Management+KBAs
    Hope this helps!!!
    Regards,
    Maheh

  • Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

    We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
    We have also reproduced the issue on the following stacks:
    Oracle SE One 11.2.0.3 (with Spatial enabled)
    Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
    11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
    Microsoft Windows Server 2003R2 Standard x64 Edition
    However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
    Any help or advice would be much appreciated.
    Kindest Regards,
    Kevin

    In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
    BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

  • Do I use the same password for apple ID and for iCloud?

    I am not getting mail on my iphone or my ipad air!
    When I put the password for my apple ID into icloud- it keeps reverting to another password. i.e. doesn't hold the apple ID password.
    Is this a problem keeping the mail from getting to my phone and ipad?
    DO I USE THE SAME PASSWORD FOR APPLE ID AND ICLOUD?
    Help. and MERRY CHRISTMAS

    What are you trying to do when you say "When I put the password for my apple ID into icloud- it keeps reverting to another password"?
    Where are you doing when you try to enter your password?

  • Why is my user id/pw not accepted by ICloud on my iPad but it is accepted by iCloud on my computer?  I am using the same password for both.

    Why is my user id/pw not accepted by ICloud on my iPad but it is accepted by iCloud on my computer?  I am using the same password for both.

    Rebooting your iDevice
    Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The device should begin to start up.
    Now try entering the information again. See if it works now.

  • Java Mapping Using JAXB [Java Arch for XML Binding]

    Hi All,
    Anyone tried using JAXB  [Java Architecture for XML Binding API available with Java WebServices Pack] technique for XML processing in Java Mapping??
    I am facing the following problems..
    1. I am not able to generate namespace while marshalling target XML [In standalone mode and not tried in XI].
    2. What are the jar files we need to import?
       I tried importing the following jar files in XI.
    jaxb-api.jar,jaxb-impl.jar,jaxb-libs.jar,jax-qname.jar,namespace.jar,relaxngDatatype.jar
      and getting some errors while importing these files in XI.
    3. It throws error at runtime [Interface Mapping-Test Tab]
       like Resource not found:javax/xml/bind/Messages_en.properties,javax/xml/bind/Messages_en_US.properties
    4. Even after creating a copy of available file Messages.Properties with name: Messages_en.properties and Messages_en_US.properties.. it is not generating any messages in Target message tab
    Thanks in Advance,
    Ananth Chinnaraj

    Sravya ,
    I have searched wide and far for this, but no success.
    A lot on JAXB XI and Webdynpro, but nothing on JAXB, XI and mappings.
    Could you please post the url here ?
    Thanks and kind regards,
    Jan

  • ACS 5.3 Showing Clear Text Password in Authorization reports

    Hello,
    When a tacacs user is changing the local password on the router (for local user), the acs 5.3 is showing the new password in clear text in authorization reports/logs.
    This behaviour is seen on acs 5.x, whereas acs 4.2 is showing encrypted password in the reports.
    I have checked debugs on Router and it is sending password in clear text in Tacacs Authorization packet but encrypted password in Tacacs Accounting logs.
    Debug tacacs accounting
    debug aaa accounting
    4w3d: TPLUS: Received accounting response with status PASS
    4w3d: TPLUS: Queuing AAA Accounting request 208 for processing
    4w3d: TPLUS: processing accounting request id 208
    4w3d: TPLUS: Sending AV task_id=459
    4w3d: TPLUS: Sending AV timezone=UTC
    4w3d: TPLUS: Sending AV service=shell
    4w3d: TPLUS: Sending AV priv-lvl=15
    4w3d: TPLUS: Sending AV cmd=username sansehga privilege 15 password *****
    4w3d: TPLUS: Accounting request created for 208(sanjay)
    debug tacas authorization
    debug aaa authorization
    4w3d: AAA/MEMORY: create_user (0x851611DC) user='sanjay' ruser='R1' ds0=0
    port='tty7' rem_addr='10.76.212.159' authen_type=ASCII service=NONE priv=15
    initial_task_id='0', vrf= (id=0)
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): Port='tty7' list='' service=CMD
    4w3d: AAA/AUTHOR/CMD: tty7(1390711548) user='sanjay'
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV service=shell
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd=username
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=sansehga
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=privilege
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=15
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=password
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=sehgal
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): send AV cmd-arg=<cr>
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): found list "default"
    4w3d: tty7 AAA/AUTHOR/CMD(1390711548): Method=tacacs+ (tacacs+)
    4w3d: AAA/AUTHOR/TAC+: (1390711548): user=sanjay
    4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV service=shell
    4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd=username
    4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=sansehga
    4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=privilege
    4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=15
    4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=password
    4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=sehgal
    4w3d: AAA/AUTHOR/TAC+: (1390711548): send AV cmd-arg=<cr>
    4w3d: AAA/AUTHOR (1390711548): Post authorization status = PASS_ADD
    Please share if someone has found the fix to this problem.
    Regards,
    Akhtar

    Thanks Tarik,
    But it seems it did not help overall
    Akhtar: Cisco needs long time to fix bugs unless it is P1 or P2 bug. Otherwise they'll do it at their leisure.
    If you are not on latest patch already then upgrade. If you are already on the latest patch then wait for the next one. If your bug is not mentioned to be fixed on the resolved caveats don't panic. I've seen many bugs fixed but not mentioned in the release notes. What you need to do is to contact TAC so they contact the BU for your behalf to confirm if the bug is resolved or not.
    Regards,
    Amjad

  • Allowing clear-text logins for multiple users

    I'm not sure if this is the correct section to place this question in, so Mods, please move if needed.
    As many know, Apple changed the AFP Client defaults in 10.5.x so that clear-text logins to servers are disallowed by default. You can edit the afpcleartextallow option in ~/Library/Preferences/com.apple.AppleShareClient.plist to enable it on a per user basis.
    What I wish to know is wether it's possible to allow clear-text logins on a global basis. I've looked at /Library/Preferences/com.apple.AppleShareClient.plist and it does not contain the afpcleartextallow option, and adding the option and setting it to "yes" (without editing the file in the user's preference folder) does not allow clear-text logins.
    Is there some global preference file that this option could be added to that would preclude me from having to edit the preference file for every user? Part of the reason it's a problem is if you have multiple user accounts on multiple machines, or network based home folders stored on an AFP server that only supports clear text, for example, a Netware 6.5 server running NFA for Mac.
    One problem I've seen is that until the user is actually at the desktop (well I think it's specifically when the Finder loads and reads the per-user preferences) the OS will prevent clear-text logins, regardless of the setting in the pref file, thus you cannot automatically mount volumes at login if the server only supports clear-text.
    Any suggestions or advice greatly welcomed.

    If you are familiar with the exchange man shell, use the new-mailboxsearch powershell cmdlet in your code.  You can pass it a list of -SourceMailboxes(use get-content to pass your .txt to a variable, you'll want to place each name on a new line) to
    search on/set the in place hold.. Here is the technet material on new-mailboxsearch. 
    http://technet.microsoft.com/en-us/library/dd298064(v=exchg.150).aspx

  • I used the wrong password for my belkin wifi. Now that I know the correct password I can not get pass the unable to connect or join message. I have turned off all the options such as wifi and join and also put my touch to sleep.. but nothing seems to work

    I used the wrong password to join my new belkin wifi. Now that I have the correct password, I can not get the to the join screen with the space to type in the password. I continue to get the unable to join message.  I have put the touch to sleep and I have turned on and off the wifi and join options on the Network screen page.  Does anyone know how to get pass this block of the wrong password to a new page that will allow me to type in the correct password.  I see there is a option that asks if I want to reset the network settings.. is that what I should do? and what does it erase when I do that?  Thanks for any input anyone has.

    Yes.  Reset network settings. Head to Settings -> General -> Reset and tap Reset Network Settings.
    B-rock

  • Find My Phone - can I use same user + password for 2 phones?

    Just loaded the "Find My Phone" App on my new iPhone 4 and set it up. What a great tool for locating a lost iPhone. The only problem is that my wife and I have a joint mail and apple ID account.
    So, my question is can I use Same user name (mail account) and password for TWO iPhone 4's (mine and wifes)? I assume that would work since each phone has a different serial number, and it seems to be ok when connected to my computer to sync each phone separately.
    Any help would be appreciated, thanks.

    My phone was stolen a few days ago. It must be flat by now, I have had it locked by my service provider, Find my Phone still works but says it's in Sydney, I live in Melbourne. Is this accurate? How can it still find the phone if it's not on?

  • Can you use a text field for email sender with E-mail button

    basically i would like to use input information from the user when someone sends an email instead of the default which is to look for a third party e-mail program like outlook. I want to bypass that and possibly use a text field that has the user input their email. some people don't use outlook so it would be nice to bypass that somehow. Is there a way to send email without the whole outlook thing, like not needing a "sender" and instead require them to input email address. I just want to receive the pdf. I am using LIVECYCLE by the way.

    You must enable POP forwarding for the account preferences via webmail access for the account.
    http://mail.google.com/support/bin/answer.py?answer=13273
    http://www.macosxhints.com/article.php?story=20041110192454841
    The instructions for enabling POP forwarding and creating the account as a POP account with an email client such as the Mail.app are available at Gmail's website.

  • Should I use one (1) password for all my password requirements or vary them?

    Hello.  At present, I have many different passwords for various password requirements on my iMac.  Would it be possible to use only
    one strong password instead for ALL my needs?  Thanks for any input on this.

    Thanks very much everyone--sorry I can only give 'this helped me' points to the first couple of answers, doesn't look like I can give out any more.  Also I will put a 'this solved my question' on after I wait for a few more replies, if they should come in.
    I have been using MANY passwords, actually about 3 pages of them I keep written down, but thought I was being paranoid!  By the sounds of it I should keep up with what I am doing even though it is a bit cumbersome.
    There is a program called 1Password but the cost is a bit prohibitive and I have found in the past that I pay and download some of these programs and then find I cant understand completely how to use them, so for the time being I will continue with what I am doing, thanks to your input.
    I did read somewhere that a strong password would be a series of statements that meant something to you--for example 'Ilovetopasstimeonmymac' (I love to pass time on my mac).  I have also read that putting a # sign in with the characters and numbers has merit.
    Again thanks for your input, I appreciate your time and expertise.  Cheers.

  • Seem to have multiple apple ids one on computer one on iPod cannot use iTunes because password for old id not recognized cannot update user name for ipod

    cannot update username on ipod for itunes
    why are they all different. Why don't I have just one id?
    I cannot update apps.
    password for username not recognized
    I want one apple id for everything
    one password for everything
    I cannot retrieve or reset anything for itunes to update apps

    It appears that you have apps on the iPod that wer purchased with more than one iTunes account.  If one from more than one iTunes account need updating, you need to update them one at a time (not update all) until all the remianing apps were purchased from one account.  You may need to change the accont the iPId is signed into by go to Settings>Store and signing out and in.
    Accounts can't be merged.

  • Clear text passwords have been disabled for this protocol error...

    I'm trying to access a email server running Windows server 2003 and keep getting this error. I can send but not receive. Now I can set up thunderbird (Firefox client) to work but no luck with Mail.app I've tried every security setting, any ideas?
    Thanks!!

    it means that we are not going to print it using printer
    btw
    i have checked the note, and the Symptoms are different
    here, this is the complete error output
    Inventory: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    INCTCW module: Inventory transaction worker
    Current system time is 06-DEC-2011 08:45:11
    No completion options were requested.
    Output file size:
    0
    Output is not being printed because:
    The print option has been disabled for this report.
    Concurrent request completed
    Current system time is 06-DEC-2011 08:45:13
    ---------------------------------------------------------------------------

Maybe you are looking for