Forcing 44.1kHz PCM output through SPDIF on XtremeGamer
7Forcing 44.kHz PCM output through SPDIF on XtremeGamerTHi,
My system should be in my sig. ?My PC is only for gaming.
I have a QED Digit Opto DAC that only accepts 44.kHz PCM input over TOSlink. ?However, I can only choose 48kHz or 96kHz in Game Mode from the Control Panel. ?Is there any way to force a 44.kHz output for this card in Game Mode?
If not, given that all I need the card for is the EAX capabilities, which card would I have to buy to gain 44.kHz PCM SPDIF outputCost is most certainly a consideration?this refurbed XtremeGamer only set me back ?28 a month ago.
EDIT: I just updated to Creative Console Launcher 2.6.0.0 from the Control Panel software supplied on the CD, and have managed to get 44.kHz output working successfully in Audio Creation Mode?however, though EAX is enabled in the Console Launcher, games (such as Doom 3) refuse to recognise EAX as being available. ?So, I'm no further forward, except now I now my card is capable of 44.kHz PCM over SPDIF?I just have to force it to output it in Game Mode.
Many thanks,
S.
Thanks for the reply, I was getting very frustrated as you can tell.
But I have fixed the issue!! And it is really strange.
The exact option is on AC3 Filter on the main tab. It is called SPDIF (disabled). Checking the box seems to let dolby work. I have confirmed the correct sound output through the correct speakers through a AC-3 test file. AVIs are now outputting a dolby digital sound track through Media player classic.
I do apologise as I've used AC3 Filter many times and assumed it was a 64-bit/X-Fi issue, but really just a bug with AC3 Filter.
Edit: It now seems to work with SPDIF (disabled) ticked or not..... strange.
Message Edited by luckyknight on <SPAN class=date_text>2-24-2005 <SPAN class=time_text>02:57 AM
Message Edited by luckyknight on 2-24-2005 03:0 AM
Similar Messages
-
Can x-fi output 44100Hz PCM sound over spdif connectio
Can the x-fi platinum output 4400Hz PCM sound over the optical/coaxial connections? Or can it only do 48kHz and 96kHz?
Because if i play a flac file that is 4400Hz my yamaha rx-v700 receiver says its getting 48kHz.
When I play 48kHz my receiver says its getting 48kHz.
When I play 96kHz my receiver says its getting 96kHz.
So im wondering if the x-fi is limited to outputting only 48 or 96kHz over spdif connections.
Because I can see other sound cards like auzentech says this regarding spdif output for their cards: Supports 44. kHz / 48kHz / 96kHz S/PDIF Output through both Coaxial RCA and Optical ToslinkHSE wrote:
In Bit-matched mode, samplerate is set by the audio source automatically.
WMP and CMSP don't change the master clock (at least in my case), the sampling rate is auto-detected only when I use KS or ASIO output plugins with foobar2000.
Maybe the bit-matched mode works only when kmixer is bypassed (though, I've seen same problems mentioned w/ X-Fi + asio4all drivers in foobar)?
Here is the description for bit-matched mode.
jutapa -
Soundproblems with X-Fi and DD through SPDIF
,Soundproblems with X-Fi and DD through SPDIF? Hi,
this is my first post so greetings everyone.
I have a X-Fi Elite Pro and serious problems with Dolby Digital 5., if it comes from konsoles like XBOX 360 and PS3. As speakers I use the Gigaworks S750.
I will give my best to describe it, but I'm not an expert in the english language:
Whenever loud soundeffects come from a game, than the sound rumbles with a very high tone in one of the speakers. For example crashing into a wall in a racing-game. This happens only with Dolby Digital in 5.. Not with DD Stereo or DTS and for some reason not DD 5., if it's from a movie.
What I have tried:
Replacing the Elite Pro card with a X-Fi Extreme Music (my old one)
Replacing the entire kit with a new Elite Pro (now I have two)
Replacing cables
Other drivers
Other OS (WinXP SP3 32Bit, Win7 64Bit)
Nothing works. Both the PS3 and the XBOX 360 have that, except games that have DTS. So on the XBOX 360, the problem is there with every game.
I don't know what to do. I have thought about an external decoder like the DDTS-00. But my original idea was to use the PC for everything.
Please help me!I do not mean a digital in jag, but there is a SPDIF digital in "connector" (followed is?pasted from?Audigy4 User's guide - hw specifications):
]8.
]CD_SPDIF connector (CD_SPDIF)]Connects to the digital output from a CD/DVD-ROM dri've. In case of my audigy?DD 5. will not pass through?a PCI. I wold like to know if the dd 5. will pass through a PCI in case of X-fi or Audigy4. I have not found a detailed help to sw and in your tutorials and in?<!-- StartFragment -->
Multispeaker Connectivity Guide?there is not specified }in digital connection section) if a signal is PCM stereo or DD 5. stream? -
5.1 through SPDIF on Conexant high def soundcard
have an HP Pavillion DV6810em with Vista 32. My problem is with the Conexant High Definition SPDIF interface. My first question is clarification as to whether my laptop has a front optical jack (that doubles up as a standard 3.5mm jack which is already there and working). The specs online seem to state it doesn't, but in the sound properties it says that the SPDIF interface is front optical jack. I have tried with a mini tos connection from the laptop to an AV receiver, but nothing worked.
My second and main question again relates to the SPDIF interface. I have recently purchased an HD TV and have connected an HDMI 1.3 lead from the laptop to the tv. Picture is fine, my problem is the sound. I manage to get 2 channel PCM sound through the lead (on all my software), however I really would like 5.1 sound. My tv accepts dolby and dts through HDMI and I have an optical lead running from the tv to an AV reciever which also accepts dolby and dts. I have checked my tv manual and it states that if dolby or dts is received by the tv, then it will pass it through the optical lead to the AV receiver.
I seem to have tried every potential solution from looking around the net, but I’ll outline what I have tried. I only have 2 options in sound properties – Speakers or SPDIF interface. I select the SPDIF interface as default device and within its properties, it shows that the conexant soundcard is capable of both dts and dolby. Those boxes are both checked, as are the all the other check boxes in the window. I have tried AC3 filter with numerous options, I have changed settings on my tv and av receiver and have installed all the latest drivers.
Again, 5.1 is the issue – for example, quickplay has 2 internal settings. The first, ‘analogue’ plays the 2 channel PCM. The other ‘SPDIF’ (which I assume will enable dolby or dts) when selected plays no sound at all. I have tried other programmes such as media player classic, media center and media player with the same results. I just want to know what the problem is, even if there is no solution!
To confirm, 2 channel PCM works with all software on my laptop on the SPDIF interface (and when analogue is selected quickplay), just not 5.1 dolby or dts with a dvd (like when SPDIF is selected in quickplay). Just incase you need to know, in sound properties the laptop speakers work fine, as does the headphone jack with it (which are obviously stereo analogue sound only).
Thanks for your help.Hey Man,
I ran into the same problem. There ARE solutions out there, you need to google them and they involve different sound cards then you can find here. I didnt know the audigy could do Dolby Digital, or DTS encoding, but thats what you need if you want games to work on the home theatre.
The X-FI can only output 2 channel stereo over its digital outputs... most sound cards on the market do however have DTS Encoding and Dolby Digital encoding, so any of these other options is the way to go. [For example. I switched to my onboard sound on my asus p5kc motherboard which can do dolby encoding with a software patch, so I've lost EAX 5, but I have dolby digital surroudn in games on my home theatre which rocks. ]
Creative does sell a DTS encoder seperately, but it is very very expensi've.
There is NO way to have a game output 5. on a home theatre using X-Fi Fatalty sound cards and a digital connection.
There is also no way to get the X-FI Fatalty sound card to work with Unreal Tournament 3. [openAl crash. No fix planned]
Basically its a finished card with no support and no real reason to hold on to it.
Message Edited by odawg on 04-05-2008 06:9 AMMessage Edited by odawg on 04-05-2008 06:20 AM -
Am getting PCM output error message when trying to play a video from iPad2 on my TV
The movie was purchased on iTunes store. I connected the iPad2 through the adapter via HDMI straight to the TV and I have a Bose Lifestyle system for surround 5.1 sound. After a few minutes and every few minutes after that the movie would blur and blackout then it would come back. Eventually I got a PCM OUTPUT error message onscreen. How do I resolve this problem?
I have been able to open a few items in iTunes, but have not been able to play even those videos from my Apple TV. I can airplay them from the computer, but cannot access them directly from Apple TV. This is a bit frustrating.
-
Sound Output Through miniHDMI port
I am trying to link my 13 inch MacBook Pro to my tv so I can watch videos I have on my computer on my TV. I have the mini HDMI cable converter hooked up. I am getting video from the computer to the TV but no sound. I tried a headphone to RCA converter to get sound to the TV and this works if I have the TV source set to AV. However this only sends sound to the TV and not video. And the way the TV source works I cannot select HDMI video input and av sound input. Is there a way I can force sound output through the miniHDMI cable so I can get sound and video through one cable? I would greatly appreciate any information and help anyone can provide.
See,
iMac (Late 2009), MacBook Pro (Mid 2010), MacBook (13-inch, Mid 2010)- HDMI audio doesn't work with some adapters
Mac computers- About HDMI adapters
Mac mini (Mid 2010)- Frequently asked questions about HDMI -
Gaps while playing AC3 Sound through SPDIF on KT6-Delta FISR
Hi everybody,
I'm one of those lucky guys with a KT6-Delta FISR Board :D equipped with the C-Media 9739A OnBoard Soundchip and a S-Bracket from my old K7T266 Pro2 ( MS-6380 ) mainboard.
It works great. The only problem is, when I try to play
AC3-encoded Sound directly through SPDIF there are irregular gaps ( length = about half a second ) where no signal reaches my hifi system. Playing normal PCM-encoded Sound works fine, just AC3 is the problem.
I have the latest driver, the latest bios, the latest chipset driver from via & the latest Windows XP Prof. updates. :]
I also tried different AC3 Filters ( from WinFast DVD, PowerDVD and the free ac3filter ) and a fresh WinXP Prof. installation. But nothing worked.
Always these stupid gaps. ;(
The mysterious thing is: With my old MB and an extra pci soundcard with C-Media CMI8378 Chipset and optical SPDIF it works great.
Yeah, I know I could use the old one, but the KT6 OnBoard chip has some benefits :]
Some information about my system:
- Athlon XP1800@1800(133x11,5) ( Palomino Core )
- Cooling: Copper Silent 2 TC by Arctic Cooling
- Enermax power supply ( +3,3V/35A, +5V/44A, +12V/15A)
- NVidia GeForce TI4600 from Leadtek ( i forgot: latest driver )
- Western Digital WD1200JB HDD (120GB,7200 RPM,8MB Cache )
- RAM: 256 MB PC2100, CL2 by Apacer
- Home-theatre system: Sony STR-KSL5 ( dts,dolby digital/pro logic II, digital cinema sound, 2x optical digital input, 1x coaxial digital input )
- Connection between PC and hifi system: optical
Has anyone the same problem or maybe a solution or a suggestion ? Would be nice then, when he or she posts it here )A little mistake: The S-Bracket is from the KT4 Ultra FISR - Board ( MS-6590 ), sorry for that
@osnavi:
I don't know whether it's okay or not. I just thought, the S-Bracket is just a cable extension of the onboard pin-connector ( means: there are no necessary parts in it - except the current-optical coverter for optical out - and the whole functionality is on the board ).
Have you any idea, whether there's another S-Bracket for the KT6 series ?
@maesus:
I've tested all latest available drivers ( both from www.cmedia.com.tw and from MSI via LiveUpdate3 ). All of them produced this gap.
Both drivers where tested with Coax out and Optical out.
I also tried to increase the PCI Latency in BIOS to give the sound chip more time for using the bus and therefore more time to transfer data. It didn't work, too.
I will now try the following:
- decreasing the FSB to 100 MHz ( just an idea , maybe it helps )
- installing a generic ac'97 audio driver (in case something like this exists )
- well, bang my head on my hifi system
Any suggestions are still welcomed ) -
Printing ALV Report output through Function Modules
Hi All,
I want to print my ALV Grid output through function modules/statement (not through print option in menu).
This is because, i am generating a PDF from spool when user clicks on a button. If any changes happened in the ALV output layout, they will be captured in spool through printing it.
So can you please tell me how to print the ALV Output through FMs or sending the ALV output to spool.
Thanks & Regards,
Senthil.
Edited by: senthil nathan on May 17, 2010 2:49 PMHi Dev,
Thanks for the reply.
I want to print the ALV when the user clicks on a button in toolbar. Lets say the user has made some changes to the layout, (E.g hiding a field) and when i print that output it should use the changed layout, If i use the FM suggested by you, i cant acheive this.
If you try to print this manually, the system uses the changed layout and not the original. Thats why i want to know FMs/statement to print.
Regards,
Senthil. -
Error while sending PO output through mail in PDF format - Urgent
Dear friends,
Developed program to send sapscript output through mail in pdf format, the program running properly, even function module SO_NEW_DOCUMENT_ATT_SEND_API1 returning sy-subrc 0. But the external mail is not going to user lying in SAP outbox with message <b>"Wait for communications service"</b> . SCOT is properly configured, tested mails sending through SAP office.
Find below the source code:
REPORT zmm_porder_gm
NO STANDARD PAGE HEADING.
TABLES: ekko, ekpa, t161t, t052, komv, j_1imocomp, t001, esll.
Internal Tables
DATA : txt LIKE tline-tdline, "HEADER LINE
your_ref LIKE ekko-ihrez, "your ref
our_ref LIKE ekko-unsez, "our ref
mcompname LIKE t001-butxt,
itemname LIKE ekpo-txz01,
del_text LIKE tline-tdline, "delivery text
mat_po_text LIKE tline-tdline. "material po text
DATA: g_ind TYPE i.
DATA: it_esll LIKE esll OCCURS 0 WITH HEADER LINE.
DATA: sub_packno LIKE esll-sub_packno.
DATA : po_flag(1) TYPE c.
DATA : it_erev LIKE erev OCCURS 0 WITH HEADER LINE.
DATA : nmebeln LIKE thead-tdname,
obj LIKE thead-tdname.
DATA : tline LIKE tline OCCURS 0 WITH HEADER LINE. "HEADER TEXT
DATA : it_ekko LIKE ekko OCCURS 0 WITH HEADER LINE.
DATA : it_ekpo LIKE ekpo OCCURS 0 WITH HEADER LINE.
DATA : it_zmm_porder LIKE zmm_porder OCCURS 0 WITH HEADER LINE.
DATA : it_konv LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_konv_ftr LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_konv_rate LIKE konv OCCURS 0 WITH HEADER LINE.
DATA : it_komv_tax LIKE komv OCCURS 0 WITH HEADER LINE. " For Tax Calculation
DATA : it_zmm_house_bank LIKE zmm_house_bank OCCURS 0 WITH HEADER LINE.
*DATA : mrate TYPE konv-kbetr VALUE 0, mrate1(15). rmoved by ganes and added following logic
DATA : mrate TYPE p VALUE 0 DECIMALS 2, mrate1(15).
DATA : mrate_gm TYPE p DECIMALS 2.
DATA : BEGIN OF it_konv1 OCCURS 0,
knumv LIKE konv-knumv,
kschl LIKE konv-kschl,
END OF it_konv1.
DATA : BEGIN OF it_t052u OCCURS 0.
INCLUDE STRUCTURE t052u.
DATA : END OF it_t052u.
DATA : mpay_terms LIKE t052u-text1.
DATA : mwaers LIKE konv-waers.
DATA : BEGIN OF xt052 OCCURS 0.
INCLUDE STRUCTURE t052.
DATA : END OF xt052.
DATA : it_t16ct LIKE t16ct OCCURS 0 WITH HEADER LINE.
DATA : BEGIN OF ztext OCCURS 0.
INCLUDE STRUCTURE ttext.
DATA : END OF ztext.
DATA : it_t001 LIKE t001 OCCURS 0 WITH HEADER LINE.
DATA : mtext(15) TYPE c.
DATA : it_adrc LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_adrc_ven LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_adrc_plt LIKE adrc OCCURS 0 WITH HEADER LINE.
DATA : it_makt LIKE makt OCCURS 0 WITH HEADER LINE.
DATA : it_eket LIKE eket OCCURS 0 WITH HEADER LINE. " Schedulling
DATA : it_eikp LIKE eikp OCCURS 0 WITH HEADER LINE. " Export
DATA : it_t001w LIKE t001w OCCURS 0 WITH HEADER LINE.
DATA : it_t685t LIKE t685t OCCURS 0 WITH HEADER LINE.
DATA : it_t618t LIKE t618t OCCURS 0 WITH HEADER LINE.
DATA : it_t685t_ftr LIKE t685t OCCURS 0 WITH HEADER LINE.
DATA : it_lfa1 LIKE lfa1 OCCURS 0 WITH HEADER LINE.
DATA : it_bapi_mltx_ga LIKE bapi_mltx_ga OCCURS 0 WITH HEADER LINE. "Material long text
DATA : mfirst TYPE i VALUE 0,
mpay_flag(1) TYPE c VALUE 'X',
mwerks LIKE t001w-werks,
msr TYPE i VALUE 0,
l_rate TYPE p DECIMALS 2 VALUE 0,
l_amt TYPE p DECIMALS 2 VALUE 0,
mflag(1) TYPE c,
mlctr TYPE i VALUE 0,
mfamt TYPE p DECIMALS 2 VALUE 0,
mcfamt(15) TYPE c,
mfword(100) TYPE c,
mkschl LIKE konv-kschl,
mchgamt TYPE p DECIMALS 2 VALUE 0,
mkbetr TYPE p DECIMALS 2 VALUE 0,
mkwert TYPE p DECIMALS 2 VALUE 0.
DATA : j_1iexcd TYPE j_1imocomp-j_1iexcd,
j_1icstno TYPE j_1imocomp-j_1icstno,
j_1ilstno TYPE j_1imocomp-j_1ilstno.
DATA : mjmop_r TYPE p DECIMALS 2 VALUE 0,
mjmoq_r TYPE p DECIMALS 2 VALUE 0,
mjecs_r TYPE p DECIMALS 2 VALUE 0,
mjvcs_r TYPE p DECIMALS 2 VALUE 0,
mjvrd_r TYPE p DECIMALS 2 VALUE 0,
mjsep_r TYPE p DECIMALS 2 VALUE 0.
DATA : mjmop_a TYPE p DECIMALS 2 VALUE 0,
mjmoq_a TYPE p DECIMALS 2 VALUE 0,
mjecs_a TYPE p DECIMALS 2 VALUE 0,
mjvcs_a TYPE p DECIMALS 2 VALUE 0,
mjvrd_a TYPE p DECIMALS 2 VALUE 0,
mjsep_a TYPE p DECIMALS 2 VALUE 0.
DATA : mtitle LIKE t161t-batxt.
DATA : no_ammend(10),request_by(50),ver_txt(100),ver_reason(100),stext(200).
begin of Email data declarations**************
DATA: BEGIN OF otf OCCURS 0.
INCLUDE STRUCTURE itcoo .
DATA: END OF otf.
DATA: itcpo LIKE itcpo.
DATA: itcpp LIKE itcpp.
DATA: it_docs TYPE STANDARD TABLE OF docs,
v_bin_filesize TYPE i,
it_lines TYPE STANDARD TABLE OF tline,
wa_lines TYPE tline.
DATA : i_pdf LIKE tline OCCURS 1000 WITH HEADER LINE,
v_pdf_bytecount TYPE i,
v_pdf_spoolid TYPE tsp01-rqident,
v_otf_pagecount TYPE i,
v_btc_jobname TYPE tbtcjob-jobname,
v_btc_jobcount TYPE tbtcjob-jobcount.
DATA: objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE.
DATA: objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE.
DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE.
DATA: reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
DATA: doc_chng LIKE sodocchgi1.
DATA: tab_lines LIKE sy-tabix.
DATA: vafilename(100) VALUE 'po_output.pdf'.
DATA: jobdata TYPE sxjobdata.
DATA arc_params TYPE arc_params.
DATA print_params TYPE pri_params.
DATA g_send_prog TYPE syrepid VALUE 'ZVF03_TEST_PROG'.
DATA immediate TYPE btcchar1.
DATA: i_jobname TYPE tbtcp-jobname,
i_jobcount TYPE tbtcp-jobcount,
i_jobstepcount TYPE tbtcp-stepcount.
DATA recipient_obj LIKE swotobjid.
CONSTANTS: sx_true TYPE sx_boolean VALUE 'X'.
TABLES: tbtcp.
end of Email data declarations**************
SELECTION-SCREEN : BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : mebeln FOR ekko-ebeln OBLIGATORY . " 75
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION 12.
SELECTION-SCREEN COMMENT (20) text-b01.
PARAMETERS: b1 AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN : END OF BLOCK block1.
SELECTION-SCREEN: BEGIN OF SCREEN 200 TITLE text-001 AS WINDOW.
PARAMETERS : p_email TYPE ad_smtpadr. "E-Mail Address
SELECTION-SCREEN: END OF SCREEN 200.
INITIALIZATION.
SET PF-STATUS 'ZMMPORD_STAT'.
AT SELECTION-SCREEN.
CASE sy-ucomm.
WHEN 'EMAIL'.
PERFORM zemail.
WHEN '&IC1'.
PERFORM load_data.
PERFORM process.
IF NOT p_email IS INITIAL.
PERFORM send_mail.
ENDIF.
ENDCASE.
*START-OF-SELECTION.
PERFORM load_data.
PERFORM process.
FORM load_data .
DATA : gindex LIKE sy-tabix.
SELECT * FROM t16ct INTO TABLE it_t16ct WHERE spras = 'EN'.
SELECT * FROM ekko INTO TABLE it_ekko WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SELECT * FROM erev INTO CORRESPONDING FIELDS OF TABLE it_erev FOR ALL ENTRIES IN it_ekko
WHERE edokn = it_ekko-ebeln AND rscod <> '' .
SORT it_erev BY edokn revno DESCENDING.
LOOP AT it_ekko.
IF NOT ( it_ekko-frgke EQ 'O' OR it_ekko-frgke EQ '0' ) .
MESSAGE e000(zsd) WITH 'Purchase Order is not Realeased'.
ENDIF.
ENDLOOP.
SELECT * FROM ekpo INTO TABLE it_ekpo WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SELECT * INTO TABLE it_makt
FROM makt
FOR ALL ENTRIES IN it_ekpo
WHERE matnr EQ it_ekpo-matnr.
SELECT * INTO TABLE it_lfa1
FROM lfa1
FOR ALL ENTRIES IN it_ekko
WHERE lifnr EQ it_ekko-lifnr.
ENDIF.
SELECT *
INTO TABLE it_t052u
FROM t052u
FOR ALL ENTRIES IN it_ekko
WHERE zterm EQ it_ekko-zterm
AND spras EQ 'EN'.
IF sy-subrc EQ 0.
SORT it_t052u BY zterm.
ENDIF.
SELECT * FROM eket INTO TABLE it_eket WHERE ebeln IN mebeln.
IF sy-subrc EQ 0.
SORT it_eket BY ebeln ebelp.
ENDIF.
SELECT *
INTO TABLE it_eikp
FROM eikp
FOR ALL ENTRIES IN it_ekko
WHERE exnum EQ it_ekko-exnum.
IF sy-subrc EQ 0.
SORT it_eikp BY exnum.
SELECT *
INTO TABLE it_t618t
FROM t618t
FOR ALL ENTRIES IN it_eikp
WHERE expvz EQ it_eikp-expvz
AND spras EQ 'E'
AND land1 EQ 'IN'.
IF sy-subrc EQ 0.
SORT it_t618t BY expvz.
ENDIF.
ENDIF.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'L'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
SELECT * FROM konv INTO TABLE it_konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0.
LOOP AT it_konv.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv INDEX gindex.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_konv BY knumv kherk kschl.
ENDIF.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'F'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
SELECT * INTO TABLE IT_KONV_FTR FROM KONV
FOR ALL ENTRIES IN IT_EKKO
WHERE KNUMV = IT_EKKO-KNUMV
AND ( KSCHL = 'ZIN1'
OR KSCHL = 'ZIN2'
OR KSCHL = 'ZINS'
OR KSCHL = 'ZPF1'
OR KSCHL = 'ZPF2'
OR KSCHL = 'ZPF3'
OR KSCHL = 'ZPKG'
OR KSCHL = 'ZPKF'
OR KSCHL = 'FRA1'
OR KSCHL = 'FRB1'
OR KSCHL = 'FRC1'
OR KSCHL = 'FRD1'
OR KSCHL = 'FRD2'
OR KSCHL = 'FRD3'
OR KSCHL = 'FRD4'
OR KSCHL = 'FRD5'
*****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
OR KSCHL = 'ZFBC' )
AND KWERT NE 0
AND KPOSN GT '000000'.
AND ( KRECH = 'B' " RTDK906167
OR KRECH = 'A' ).
SELECT * INTO TABLE it_konv_ftr FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0
AND kposn GT '000000'.
LOOP AT it_konv_ftr.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv_ftr-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv_ftr INDEX gindex.
ENDIF.
ENDLOOP.
IF it_konv_ftr[] IS NOT INITIAL.
SORT it_konv_ftr BY knumv kschl.
ENDIF.
SELECT KNUMV KSCHL INTO CORRESPONDING FIELDS OF TABLE IT_KONV1 FROM KONV
FOR ALL ENTRIES IN IT_EKKO
WHERE KNUMV = IT_EKKO-KNUMV
and kherk = 'D'
AND ( KSCHL = 'ZIN1'
OR KSCHL = 'ZIN2'
OR KSCHL = 'ZINS'
OR KSCHL = 'ZPF1'
OR KSCHL = 'ZPF2'
OR KSCHL = 'ZPF3'
OR KSCHL = 'ZPKG'
OR KSCHL = 'ZPKF'
OR KSCHL = 'FRA1'
OR KSCHL = 'FRB1'
OR KSCHL = 'FRC1'
OR KSCHL = 'FRD1'
OR KSCHL = 'FRD2'
OR KSCHL = 'FRD3'
OR KSCHL = 'FRD4'
OR KSCHL = 'FRD5'
*****Added one condition type below ZFBC as on 05.06.2007 :Rajiv as per mail of Sadiq via mathew sir(RTDK906646)
OR KSCHL = 'ZFBC' )
AND KWERT NE 0.
AND ( KRECH = 'B' RTDK906167
OR KRECH = 'A' ).
SELECT knumv kschl INTO CORRESPONDING FIELDS OF TABLE it_konv1 FROM konv
FOR ALL ENTRIES IN it_ekko
WHERE knumv = it_ekko-knumv
AND kwert NE 0.
DELETE ADJACENT DUPLICATES FROM it_konv1 COMPARING knumv kschl.
LOOP AT it_konv1.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_konv1-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_konv1 INDEX gindex.
ENDIF.
ENDLOOP.
IF sy-subrc EQ 0.
SORT it_konv1 BY knumv kschl.
ENDIF.
SELECT * INTO TABLE it_t685t
FROM t685t
FOR ALL ENTRIES IN it_konv
WHERE kschl EQ it_konv-kschl
AND kappl EQ it_konv-kappl
AND spras EQ 'E'.
SELECT * INTO TABLE it_t685t_ftr
FROM t685t
FOR ALL ENTRIES IN it_konv_ftr
WHERE kschl EQ it_konv_ftr-kschl
AND kappl EQ it_konv_ftr-kappl
AND spras EQ 'E'.
it_t685t_ftr-kschl = 'JVCS'.
it_t685t_ftr-vtext = 'IN CST in vat'.
APPEND it_t685t_ftr.
SELECT * INTO TABLE it_zmm_house_bank
FROM zmm_house_bank
WHERE ebeln IN mebeln.
ELSE.
MESSAGE e899(mm) WITH 'Data not found for selection criteria...'.
ENDIF.
ENDFORM. " Load_data
FORM process .
DATA : mctr TYPE i VALUE 1.
DATA : gindex LIKE sy-tabix.
DATA : mline(75) TYPE c.
DATA : mlifn2 LIKE ekpa-lifn2.
DATA : mv_name LIKE lfa1-name1,
madrnr LIKE lfa1-adrnr.
CLEAR itcpo.
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
form = 'ZMM_PORDER'
language = sy-langu
OPTIONS = itcpo
dialog = ' '
EXCEPTIONS
OTHERS = 1.
LOOP AT it_ekko.
CALL FUNCTION 'START_FORM'
EXPORTING
form = 'ZMM_PORDER'.
SELECT SINGLE *
FROM t001
INTO it_t001
WHERE bukrs EQ it_ekko-bukrs.
mcompname = it_t001-butxt.
TRANSLATE mcompname TO UPPER CASE.
Document Type
SELECT SINGLE batxt
INTO mtitle
FROM t161t
WHERE bstyp EQ 'F'
AND spras EQ 'E'
AND bsart EQ it_ekko-bsart.
REFRESH it_adrc.
SELECT SINGLE werks
INTO mwerks
FROM ekpo
WHERE ebeln EQ it_ekko-ebeln.
SELECT SINGLE *
INTO it_t001w
FROM t001w
WHERE werks EQ mwerks.
REFRESH it_adrc.
SELECT SINGLE *
INTO it_adrc_plt
FROM adrc
WHERE addrnumber EQ it_t001w-adrnr.
REFRESH : xt052.
mfamt = 0.
msr = 0.
in 500c this statement failed.
SELECT SINGLE * FROM T052 INTO XT052 WHERE ZTERM = IT_EKKO-ZTERM.
CALL FUNCTION 'FI_TEXT_ZTERM'
EXPORTING
I_T052 = XT052
TABLES
T_ZTEXT = ZTEXT.
As per Preeti... Shipment address should be shown on top as purchase order company address. 27.04.
PERFORM writeform USING 'PLANT' 'PLANT'.
SELECT SINGLE name1 adrnr
INTO (mv_name,madrnr)
FROM lfa1
WHERE lifnr EQ it_ekko-lifnr.
REFRESH it_adrc[].
CLEAR it_adrc[].
FREE it_adrc[].
SELECT SINGLE *
INTO it_adrc_ven
FROM adrc
WHERE addrnumber EQ madrnr.
READ TABLE it_lfa1 WITH KEY lifnr = it_ekko-lifnr.
PERFORM writeform USING 'VENDOR' 'VENDOR'.
Shipment
SELECT SINGLE werks
INTO mwerks
FROM ekpo
WHERE ebeln EQ it_ekko-ebeln.
up to 1 rows.
SELECT SINGLE *
INTO it_t001w
FROM t001w
WHERE werks EQ mwerks.
SELECT SINGLE j_1iexcd j_1icstno j_1ilstno
INTO (j_1iexcd,j_1icstno,j_1ilstno)
FROM j_1imocomp
WHERE werks = mwerks.
REFRESH it_adrc.
SELECT SINGLE *
INTO it_adrc
FROM adrc
WHERE addrnumber EQ it_t001w-adrnr.
PERFORM writeform USING 'SHIPMNT' 'SHIPMNT'.
READ TABLE it_eikp WITH KEY exnum = it_ekko-exnum.
IF sy-subrc EQ 0.
READ TABLE it_t618t WITH KEY expvz = it_eikp-expvz.
ENDIF.
your_ref = it_ekko-ihrez.
our_ref = it_ekko-unsez.
READ TABLE it_erev WITH KEY edokn = it_ekko-ebeln.
IF sy-subrc = 0.
no_ammend = it_erev-revno.
request_by = it_erev-crnam.
ver_txt = it_erev-txz01.
READ TABLE it_t16ct WITH KEY rscod = it_erev-rscod.
IF sy-subrc = 0.
ver_reason = it_t16ct-rstxt.
ELSE.
ver_reason = ''.
ENDIF.
ELSE.
no_ammend = ''.
request_by = ''.
ver_txt = ''.
ver_reason = ''.
ENDIF.
PERFORM writeform USING 'PO_INFO' 'PO_INFO'.
IF it_zmm_house_bank[] IS NOT INITIAL.
READ TABLE it_zmm_house_bank INDEX 1.
PERFORM writeform USING 'BANKDTL' 'BANKDTL'.
ENDIF.
PERFORM writeform USING 'HDR_INFO' 'HDR_INFO'.
PERFORM writeform USING 'BRK_TTL' 'MAIN'.
msr = 1.
mlctr = 1.
*added by ganesh to prevent deleted items to appear in print out
LOOP AT IT_EKPO WHERE EBELN EQ IT_EKKO-EBELN.
LOOP AT it_ekpo WHERE ebeln EQ it_ekko-ebeln AND loekz NE 'L'.
*end of change
CLEAR: mrate, mrate1.
SELECT * FROM konv INTO TABLE it_konv_rate
WHERE knumv EQ it_ekko-knumv
AND kposn EQ it_ekpo-ebelp
AND ( kschl EQ 'PBXX' OR kschl EQ 'PB00' OR kschl EQ 'P001' ).
LOOP AT it_konv_rate.
IF it_konv_rate-kpein > 0. " added by ganesh as per sudhir 12.10.2007
mrate_gm = it_konv_rate-kbetr / it_konv_rate-kpein.
mrate = mrate + mrate_gm. " added by ganesh as per sudhir 12.10.2007
ELSE.
mrate = mrate + it_konv_rate-kbetr.
ENDIF.
IF it_konv_rate-waers IS NOT INITIAL.
mwaers = it_konv_rate-waers.
ENDIF.
ENDLOOP.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mrate = mrate * 100.
ENDIF.
End for japanies Yen
mrate1 = mrate.
End rate
mfirst = 0.
MFAMT = MFAMT + ( IT_EKPO-NETPR * IT_EKPO-MENGE ).
mfamt = mfamt + ( mrate * it_ekpo-menge ).
PERFORM get_mat_long_text.
DATA: lt_ctr TYPE i VALUE 0,lt_ctr1 TYPE i, lt_count TYPE i VALUE 0. " Long text counter
DESCRIBE TABLE it_bapi_mltx_ga LINES lt_count.
CLEAR it_bapi_mltx_ga.
*Added by Rajiv 10.05.2007 Read and if condition RTDK906165
READ TABLE it_konv WITH KEY knumv = it_ekko-knumv
kposn = it_ekpo-ebelp.
mkbetr = 0.
mkwert = 0.
IF sy-subrc EQ 0.
LOOP AT it_konv WHERE knumv EQ it_ekko-knumv
AND kposn EQ it_ekpo-ebelp.
IF it_konv-krech EQ 'A'.
mkbetr = it_konv-kbetr / 10.
ELSE.
mkbetr = it_konv-kbetr.
ENDIF.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mkbetr = mkbetr * 100.
ENDIF.
End for japaies Yen
IF mkbetr LT '0'.
mkbetr = mkbetr * ( -1 ).
ENDIF.
mkwert = it_konv-kwert.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mkwert = mkwert * 100.
ENDIF.
End for japaies Yen
mfamt = mfamt + mkwert.
IF mkwert LT '0'.
mkwert = mkwert * ( -1 ).
ENDIF.
IF it_ekpo-matnr IS INITIAL.
itemname = it_ekpo-txz01.
ELSE.
READ TABLE it_makt WITH KEY matnr = it_ekpo-matnr.
itemname = it_makt-maktx.
ENDIF.
READ TABLE it_t685t WITH KEY kschl = it_konv-kschl BINARY SEARCH.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
IF mfirst EQ 0.
PERFORM writeform USING 'BRK_INFO' 'MAIN'.
mfirst = 1.
ELSE.
ADD 1 TO lt_ctr.
CLEAR it_bapi_mltx_ga.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
IF sy-subrc NE 0.
CLEAR it_bapi_mltx_ga.
ENDIF.
PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
ENDIF.
mlctr = mlctr + 1.
ENDLOOP. " it_konv.
ELSE.
IF it_ekpo-matnr IS INITIAL.
itemname = it_ekpo-txz01.
ELSE.
READ TABLE it_makt WITH KEY matnr = it_ekpo-matnr.
itemname = it_makt-maktx.
ENDIF.
READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
mfirst = 0.
IF mfirst EQ 0.
PERFORM writeform USING 'BRK_INFO' 'MAIN'.
mfirst = 1.
ELSE.
ADD 1 TO lt_ctr.
CLEAR it_bapi_mltx_ga.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr. "For long text
IF sy-subrc NE 0.CLEAR it_bapi_mltx_ga.ENDIF.
PERFORM writeform USING 'BRK_INFO1' 'MAIN'.
ENDIF.
ENDIF.
*Commented by rajiv 10.05.2007 used this code in above condition.
added by ganesh on 260407 to print record
if it_konv is initial.
READ TABLE IT_MAKT WITH KEY MATNR = IT_EKPO-MATNR.
READ TABLE IT_T685T WITH KEY KSCHL = IT_KONV-KSCHL BINARY SEARCH.
READ TABLE IT_EKET WITH KEY EBELN = IT_EKPO-EBELN
EBELP = IT_EKPO-EBELP BINARY SEARCH.
mFirst = 0.
if mFirst eq 0.
PERFORM WRITEFORM USING 'BRK_INFO' 'MAIN'.
mFirst = 1.
else.
add 1 to lt_ctr.
clear it_bapi_mltx_ga.
read table IT_BAPI_MLTX_GA index lt_ctr. "For long text
if sy-subrc ne 0.clear it_bapi_mltx_ga.endif.
PERFORM WRITEFORM USING 'BRK_INFO1' 'MAIN'.
Endif.
endif.
end of change
REFRESH it_komv_tax.
PERFORM get_tax_cal USING it_ekpo-ebeln
it_ekpo-ebelp.
Changing it_komv_tax.
REFRESH : it_zmm_porder.
CLEAR : it_zmm_porder.
SELECT * INTO TABLE it_zmm_porder
FROM zmm_porder
WHERE flag EQ 'T'.
IF sy-subrc EQ 0.
SORT it_zmm_porder BY kschl.
ENDIF.
LOOP AT it_komv_tax.
gindex = sy-tabix.
READ TABLE it_zmm_porder WITH KEY kschl = it_komv_tax-kschl BINARY SEARCH.
IF sy-subrc NE 0.
DELETE it_komv_tax INDEX gindex.
ENDIF.
ENDLOOP.
LOOP AT it_komv_tax WHERE kwert IS NOT INITIAL.
IF ( IT_KOMV_TAX-KSCHL EQ 'JMOP' OR
IT_KOMV_TAX-KSCHL EQ 'JECS' OR
IT_KOMV_TAX-KSCHL EQ 'JSEP' OR
IT_KOMV_TAX-KSCHL EQ 'JMOQ' OR
IT_KOMV_TAX-KSCHL EQ 'JVCS' OR
IT_KOMV_TAX-KSCHL EQ 'JVRD' OR
IT_KOMV_TAX-KSCHL EQ 'JMIP' OR
* IT_KOMV_TAX-KSCHL EQ 'JEIP' OR
IT_KOMV_TAX-KSCHL EQ 'JSEI' OR
IT_KOMV_TAX-KSCHL EQ 'JSRT' OR
IT_KOMV_TAX-KSCHL EQ 'JEC3' OR
IT_KOMV_TAX-KSCHL EQ 'JVRN' )
AND IT_KOMV_TAX-KWERT IS NOT INITIAL.
SELECT SINGLE vtext
INTO mtext
FROM t685t
WHERE kschl EQ it_komv_tax-kschl
AND spras EQ 'E'.
l_rate = it_komv_tax-kbetr / 10.
l_amt = it_komv_tax-kwert.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
l_amt = l_amt * 100.
ENDIF.
End for japaies Yen
ADD l_amt TO mfamt.
IF lt_ctr LT lt_count. "Long text
ADD 1 TO lt_ctr.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
ELSE.
CLEAR it_bapi_mltx_ga.
ENDIF.
IF l_rate EQ 0 OR l_amt EQ 0.
l_rate = ''.
l_amt = ''.
ENDIF.
PERFORM writeform USING 'TAX_LINE_ITEM' 'MAIN'.
ENDIF.
ENDLOOP.
IF lt_ctr LT lt_count.
DATA mbal_line TYPE i.
mbal_line = ( lt_count - lt_ctr ).
DO mbal_line TIMES.
ADD 1 TO lt_ctr.
READ TABLE it_bapi_mltx_ga INDEX lt_ctr.
IF sy-subrc = 0.
PERFORM writeform USING 'LTEXT' 'MAIN'.
ENDIF.
ENDDO.
ENDIF.
CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F04'
language = sy-langu
name = nmebeln
object = 'EKPO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
del_text = tline-tdline.
ENDIF.
CONDENSE del_text.
ENDLOOP.
CONCATENATE it_ekko-ebeln it_ekpo-ebelp INTO nmebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F03'
language = sy-langu
name = nmebeln
object = 'EKPO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
refresh.
CLEAR : po_flag, mat_po_text.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
MOVE tline-tdline TO mat_po_text.
CONDENSE mat_po_text.
PERFORM writeform USING 'MTRL_PO_TEXT' 'MAIN'.
po_flag = 'X'.
CLEAR : mat_po_text.
ENDIF.
ENDLOOP.
*Added lines below for Schedule delivery for line item on 09.05.2007:Rajiv
CLEAR g_ind.
READ TABLE it_eket WITH KEY ebeln = it_ekpo-ebeln
ebelp = it_ekpo-ebelp BINARY SEARCH.
g_ind = sy-tabix.
LOOP AT it_eket FROM g_ind.
IF it_eket-ebeln EQ it_ekpo-ebeln AND it_eket-ebelp = it_ekpo-ebelp.
PERFORM writeform USING 'SCHEDULE' 'MAIN'.
ELSE.
EXIT.
ENDIF.
ENDLOOP.
*End Addition:Rajiv
PERFORM writeform USING 'REQSLP' 'MAIN'.
mlctr = mlctr + 1.
msr = msr + 1.
CLEAR: lt_ctr, lt_ctr1.
following lines added by ganesh to add service po details as per Mr. sadiq 21.08.2007
IF it_ekpo-packno IS NOT INITIAL.
CLEAR sub_packno.
SELECT SINGLE sub_packno INTO sub_packno FROM esll WHERE packno = it_ekpo-packno.
IF sub_packno IS NOT INITIAL.
CLEAR it_esll.
REFRESH it_esll.
SELECT * FROM esll INTO CORRESPONDING FIELDS OF TABLE it_esll
WHERE packno = sub_packno.
IF sy-subrc = 0.
PERFORM writeform USING 'SERVICE_PO_TEXT' 'MAIN'.
ENDIF.
LOOP AT it_esll.
CONCATENATE sub_packno it_esll-introw INTO obj.
CALL FUNCTION 'READ_TEXT' "4500002446 C300
EXPORTING
id = 'LTXT'
language = sy-langu
name = obj
object = 'ESLL'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
CLEAR stext.
LOOP AT tline.
CONCATENATE stext tline-tdline INTO stext SEPARATED BY space.
ENDLOOP.
FREE tline.
CLEAR tline.
REFRESH tline.
PERFORM writeform USING 'SERVICE_PO' 'MAIN'.
PERFORM writeform USING 'SERVICE_TEXT' 'MAIN'.
ENDLOOP.
ENDIF.
ENDIF.
end of change
ENDLOOP. " it_ekpo.
IF mlctr < 15.
DO 5 TIMES.
PERFORM writeform USING 'LINEFEED' 'MAIN'.
ENDDO.
ENDIF.
added by ganesh for allding line before ECC No.
IF it_ekko-bsart NE 'ZIM'. " IF EXPORT NO NEED TO PRINT ECC.
PERFORM writeform USING 'LIN' 'MAIN'.
PERFORM writeform USING 'WERKS_TAX_DETAIL' 'MAIN'.
ENDIF.
end of change
MFLAG = 'Y'.
PERFORM writeform USING 'TERMS_VAL' 'MAIN'.
LOOP AT it_konv1 WHERE knumv EQ it_ekko-knumv.
mkschl = it_konv1-kschl.
mchgamt = 0.
LOOP AT it_konv_ftr WHERE knumv EQ it_konv1-knumv
AND kschl EQ mkschl.
mchgamt = mchgamt + it_konv_ftr-kwert.
ENDLOOP.
For Japanies Yen "RTDK906759
IF it_ekko-waers = 'JPY'.
mchgamt = mchgamt * 100.
ENDIF.
End for japaies Yen
mfamt = mfamt + mchgamt.
IF mchgamt LT '0'.
mchgamt = mchgamt * ( -1 ).
ENDIF.
READ TABLE it_t685t_ftr WITH KEY kschl = mkschl.
PERFORM writeform USING 'TERMS_FTR_VAL' 'MAIN'.
mlctr = mlctr + 1.
ENDLOOP.
mflag = 'T'.
CALL FUNCTION 'HR_IN_CHG_INR_WRDS'
EXPORTING
amt_in_num = mfamt
IMPORTING
amt_in_words = mfword
EXCEPTIONS
data_type_mismatch = 1
OTHERS = 2.
CONDENSE mebeln.
nmebeln = it_ekko-ebeln.
REFRESH tline.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = 'F01'
language = sy-langu
name = nmebeln
object = 'EKKO'
TABLES
lines = tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
ENDIF.
*---- CHANGED BY MATHEW BECAUSE THIS STATMENT WORKING FINE IN 300 BUT NOT IN 500C.
LOOP AT ZTEXT.
IF ZTEXT-TEXT1 IS NOT INITIAL.
PERFORM WRITEFORM USING 'TERMS_COND_VAL_PAY' 'MAIN'.
ENDIF.
MPAY_FLAG = 'Y'.
ENDLOOP.
READ TABLE it_t052u WITH KEY zterm = it_ekko-zterm.
LOOP AT it_t052u WHERE zterm EQ it_ekko-zterm.
IF it_t052u-text1 IS NOT INITIAL.
PERFORM writeform USING 'TERMS_COND_VAL_PAY' 'MAIN'.
ENDIF.
mpay_flag = 'Y'.
ENDLOOP.
PERFORM writeform USING 'TERMS_COND_VAL' 'MAIN'.
LOOP AT tline.
IF tline-tdline IS NOT INITIAL.
PERFORM writeform USING 'TERMS_COND_VAL_HDR' 'MAIN'.
ENDIF.
CONDENSE txt.
ENDLOOP.
PERFORM writeform USING 'FTR' 'FTR_LIN3'.
PERFORM writeform USING 'FTR_LIN1' 'FTR_LIN1'.
CALL FUNCTION 'END_FORM'.
ENDLOOP. " It_ekko.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT = itcpp
RDI_RESULT =
TABLES
otfdata = otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " Process
*& Form WRITEFORM
text
-->P_0150 text
-->P_0151 text
FORM writeform USING value(p_0150)
value(p_0151).
CALL FUNCTION 'WRITE_FORM'Hi
I think some basis related configuartions to be done
Try like this and inform me
A cyclic job runs, which processes the messages seen in the SOST queue.
Are you sure it's not the frequency of the cyclic job, rather than the
number of messages in the queue, that you are observing? In messages
that are queued and before the cyclic job runs, "wait for comm. service"
is the normal status.
If you mean that there are always 4 items queued in SOST regardless of
the cyclic send job, then I have no ideas. I would have thought there
was no way to do that.
when the send job runs it just never
picks them up & sends them, while it picks up many others. The send job
is somehow blind to these; no error message occurs. In this case, I
'delete' them from the queue (in SOST) and then 'undelete' (drop down
menu -> /Go to /Deleted Items) them and then re-queue them. THEN they
actually get picked up & sent when the next cyclic send job executes.
Regards
Pavan -
How do I get digital audio to output through my Audigy 2?, What hardware do I ne
I play my 360 on my computer monitor and I have an Audigy 2 ZS sound card w/ Inspire p7800 7. speaker setup.
My question is, if I have Dolby Digital 5. and DTS output through those speakers, what kind of hardware would I need to run the optical output from my 360 into the computer and get a digital signal through my speakers in 5. Is it possible? Thanks in advance.Message Edited by Reeg on -29-20072:0 PMyou need to buy their i/o dri've that's mean for the audigy 2zs
-
Output Through FAX and Email for Order Confirmation
We are yet to have this in our system and in requirements gather phase for my FS. I request you to help me in finishing this .
so far i considered the following
The following information is required :
1. To all SD documents ? ( For eg : Order Confirmation,Delivery Note ,
Legal invoice )
2.Need to have a fax number/Email maintained for a customer
3. Frequency of the ouput?
4. Is duplication of output through email/Fax is required ?
5. If sent by mail, in simple mail/ an attachment in pdf required and
what shall the subject line contain?
Please guide if i am Missed any requirement gathering . pls write me or send some kindaa FSHi Yuvraj
Kindly check the links for the output configuration and other inputs also
[https://wiki.sdn.sap.com/wiki/display/ERPLO/OutputDeterminationOverview]
[https://wiki.sdn.sap.com/wiki/display/ABAP/SendSpoollistofbackgroundjobtoSAPinbox]
[https://wiki.sdn.sap.com/wiki/display/ABAP/PDFDownlaodByCreatingSpool+Request]
Regards
Srinath -
Is it available crystal output through printer in peoplesoft(web/PIA).
Post Author: rajaumareddy
CA Forum: Crystal Reports
Crystal output(through printer) to a Window when running via PIA (Web). Is it available in peoplesoft.Addendum: later versions of Premiere Elements now have the SmartSound Sonicfire Pro Express Tracks version (not the Scoring Edition) included, rather than the older QuickTracks module. This allows one to use the newer SmartSound Multi-Track discs, where the older QuickTracks module will only work with some of the older Multi-Track discs. The version of SmartSound Sonicfire Pro Express Tracks included is limited, vs the Scoring Edition (available for purchase), but allows for a lot of editing of SmartSound material. The installation is separate from the installation of the Premiere Elements installation, and involves a download of the Sonicfire Pro Express Tracks installer. It is also necessary to then apply the update to the Sonicfire Pro Express Tracks program.
I feel, however, that the Sonicfire Pro Scoring Edition, when used with the Multi-Track discs, is so very useful, that I recommend anyone, who is serious about creating custom soundtracks for their Videos, look closely at it, and also that they see the SmartSound tutorials (on the SmartSound Web site), to discover the power that it provides - it is like having a million variations for each Multi-Track song.
Hunt -
I'm really at a brick wall with this. All I want to do is record the PCM output to an MP3. In XP I could use All Sound Recorder but in Arch I'm trying Audacity and VLC. In audacity I can only manage to get little blurbs recorded or I'll get a recording with a ton of hiss on top of the microphone input (I don't get any hiss on the default sound recorder). There are 5 different "mic" option, i've tried them all and they all either do nothing or record the built-in mics. I got completely lost with VLC.
Are there any solutions to my problem?
Here's a screenshot of my setup if it helps any: frankly it's looking like my sound card doesn't support this under Linux
Last edited by dr/owned (2009-01-09 11:14:26)It's the int mic that seems to be muted... Just in case you can mute/unmute with key "m" under alsamixer, it's turning green when unmuted and the "MM" becomes "00".
I'm really not expert , so I might be wrong with this anyway
Last edited by skualito (2009-01-09 12:11:38) -
Quotation output through email,
HI All,
How can I send quotation output through email, Can some one provide me a step by step configuration guide for Output determination via email.Hi,
I hope your using SAP Standard Output type for Quotation. That is "AN00".
This is how you configure that.
Go to Tx: NACE
Highlight "V1 - Sales" line & click on "Output types" button. Then click on "Display/Change" button to come to Change mode.
Then highlight "AN00 - Quotation" line & click on "Details" Icon. (Magnifying Glass)
Check whether your using correct Access Sequence for your client in the "General" tab. If not change it to correct one. This will determine whch out out you want to select during processing. You can create you own access sequence using "Access sequences" Option in the NACE Tx.
Go to "Default Values' tab and select "Dispatch time" as "4 - Send immediately when Saving" - this is to send the email as soon as you save the quotation. If you don't want that, select appropriate one.
Then double click on "Processing routines" node. there you have to add Medium as "7 - Simple Mail". Check whether the "Form" & "Program" are correct. This will determine the layout of the output. Else get a ABAP's help to customize that.
Go to "Partner Functions" node & add relevant "Medium" as 7 & enter relevant Partner function that you want to send the output.
Now configuration is over.
Go to Tx: VV11 to create master data. Enter "AN00" as output type & press Enter.
Based on the access sequence, enter relevant data.
Save.
Now check with a new quotation.
Best regards,
Anupa -
Hi,
Can i send my script output through Idoc?
Thanks,
SreenivasHi,
If u check in NACE selecting appl and output types tab
and processing routines u can find these
medium
1 --- printoutput
2 --- fax
6 --- EDI
A --- Distribution(ALE) what does these last two mean for
i think it can be possible?
Please check this and make me clear.....
Also give rply how to justify that we cant send....
Thanks & Regards
Sreenivas
Maybe you are looking for
-
Issues after updating ios 7.1.1 on my iPad Air
I just updated my iPad Air (32GB) this morning to ios 7.1.1 from 7.1. After updating, my iPad Air just went into recovery mode... I have more than 26GB data in my iPad Air... I tried several ways to reboot the iPad. But I still cannot turn my iPad no
-
How to replace my calendars via iTunes?- not working correctly
iCal has been working great for me unitl a few months ago when I had major duplicating events problems.... I've thought about swictching to something else, but I really do like ical and would like to fix this final problem..... For the moment, my onl
-
I have an ipad that was issued from my company. I would like to add a second itunes account for just media with my personal credit card. I have another itunes account on my mac air. Can I download it to my ipad without disturbing my work appicatio
-
OK, I can make a "playlist" for "The Shield, season 7" or "Prison Break, season 4" but the list gets filed under PLAYLISTS. I want to file them under LIBRARY - TV Shows. Can I do that? How? I don't want the seasons of "Lost" mixed up with my Music Li
-
First time executing BSP program in local system
Hi, I am executing simple BSP application at first time in my new system, but i need to provide host address and systems IP address in Drivers. Please let me know the exact procedure to provide this information Drivers-->ETC folder. Thanks, Subramany