Forcing iMac DV 400MHz (Early 2001) reflash the firmware

My firmware has somehow become corrupt. The machine still functions, but firmware related things such as the kernel panic image being corrupted and unreadable and some strange option-boot screen behaviors (including the Open Firmware screen coming up if booting from a linux operating system). Is there any way to force the firmware to bypass the version check and reflash anyway? Are there any other possible solutions to my problem? Thanks in advance.

Parry, Welcome to the discussion area!
...booting from a linux operating system...
Are there any other possible solutions to my problem?
If the firmware is actually corrupted you don't have many options. There is no way for a user to force a firmware update. The only solutions that I am aware of are (a) replace the motherboard or (b) take the iMac to an AASP (Apple Authorized Service Provider) where they will probably replace the motherboard.

Similar Messages

What are the detailed audio specs - Intel iMac 2.66ghz (early 2009)?

Hi, I am wondering what the detailed audio specs are for this system - Intel iMac 2.66ghz (early 2009).
The online description only provides the basics. I would like to know more, such as frequency response, sound to noise ratio, etc. Is this information available anywhere?
Thank you.

Apple hasn't posted detailed release notes for the 2009 iMacs yet, but I doubt that the audio specs are any different from those in the 2008 iMac which can be found here.
Regards.

IMac G5 Intel Early model 10.4.4 will not shut down

I have just replaced the internal HDD due to hardware failure in my iMac g5 (Intel early model) reinstalled the OS, applied all updates successfully. Problem is the machine WILL NOT SHUT DOWN. If I chose shut down, it will only restart! (As it does if I choose restart) Only way I can power it down, is to pull the plug or hold the power button in. It will go to sleep, after preset time on sys prefs. but will not shut down. HELP!!!!!!!!

iMac g5 (Intel early model)
There is no such Mac.
It is either an Intel Mac or a PPC Mac.
If yours is an Intel mac the correct forum is here:
http://discussions.apple.com/category.jspa?categoryID=189

Imac g3 Early 2001 - Indigo cd drive replace

hi,
i have a imac g3 early 2001. It's cd drive is broken is there a cd drive that will fit it and work without and drivers
you can read about it here http://everymac.com/systems/apple/imac/specs/imac_400_indigo.html
thanks DM1000

A 2001 G3 iMac has the slot-loading drive and I recall it being something of a different breed of cat. There is not room i teh case for full-size tray-loading drives as used in mini-tower computers. Here is an image from an iMac DV 2000 service manual; the 2001 uses the same drive form factor:
here is the connector side of that same drive:
The same manual shows three Apple part numbers for optical drives in the 2000 model:
I agree this could end up exceeding the cost of a couple of used G3 iMacs. A 2001 model does have FW400 ports, which gives a little more choice in externals. I have an older Sony external DVD-RW that has Firewire and has booted our iMac 2000 400DV.
Here is the proper Apple part at a reasonable price but it is a USA vendor:
http://www.powerbookmedic.com/iMac-G3-24x-CD-ROM-Drive-p-25121.html

My iMac is an early 2006 running Snow Leopard and cannot be upgraded to Lion or Mt Lion. Do I have to buy a new computer in order to use the iphone 5 which I have ordered ?? ?

My iMac is an early 2006 model running Snow Leopard 10.6.8 and cannot be up graded to Lion or Mountain Lion. I also am running iTunes 10.6.3 and cannot down load iTunes 7.
Hardware Overview:
Model Name:          iMac
Model Identifier:          iMac4,1
Processor Name:          Intel Core Duo
Processor Speed:          1.83 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          2 MB
Memory:          1.5 GB
Bus Speed:          667 MHz
Boot ROM Version:          IM41.0055.B08
SMC Version (system):          1.1f5
Serial Number (system):          W8******U2N
Hardware UUID:         ****
It is running through a cable modem and Wi-Fi Extreme and is lightning fast.
I cannot afford to buy nor do I need a faster and more powerful iMac. My G3 iPhone accidently went swimming the other day (and died) after I had already ordered a new iPhone 5 which hasn't arrived yet.
My bottom line question is ; Do I have to buy a new iMac to be able to use my new iPhone 5.    Thanks, Ted
<Edited By Host>

OSX 10.6.8 can run iTunes 10.7
iTunes system requirements - http://www.apple.com/itunes/download/

Put a music cd in my imac to download earlier in the day, came back later in the evening now it wont power up from going to sleep, can hear some movement in the cd drive area but no power or screen?

Does anyone have an idea what is up with my imac. I put a cd in it earlier in the day to download into itunes, left for work and came back to it later in the evening. When I tapped the keboard to to wake it up there was no power, no screen, only a light sound that came from near the cd drive area on the right. I've un plugged it and pluggged back in several times. After that I hit the power button, again I could hear a light sound comming from the area near the cd drive almost like it's the hard drive trying to power up or the cd spining in the drive. It will continue to do this over and over until I either unplug or hold down the power button.
Wookiemaca

Nothings happening, tried the mouse, tried the keyboard, nothing. I followed the instructions for resetting the SMC and the only thing I get is the light sound I describbed in my earlier message. The more i listen I don't think it's the cd drive, I feel like that would be a little louder than the sound I hear. What I'm hearing sounds like a light spinning sound almost like the hard drive when yo click the keyboard to wake it up, except it keeps doing it over and over again until I unplug the mac. When I plug it back in, it will not make the sound until I press the power button on the back.

Pages (5.2) won't quit on 27" iMac with OS 10.9.2. I need to force quit and then reopen. Fortunately the document is saved. Anyone else have this issue?

In summary I purchased a new 27" iMac with Mavrickes, OS 10.9.2. When I try to close a Pages (v5.2) document after saving the document the application freezes and I get the spinning rainbow ball. I then need to Force Quit Pages. When the Pages application is reopened the documents pop back up, with the data saved after the Force Quit, I am able to close the document. Any suggestions?
I deleted Pages and then reinstalled a new downloaded copy of the application and the issue persists.

If you migrated from an older Mac, Pages '08/'09 might still be in your Applications/iWork folder.
Peter

What is the max ram for a iMac DV 400mhz? (family M5521)

I've read several posts on this forum about the max memory for this iMac. Several people say it's 512 then usually someone comes back and says "Actually it's 1024". As per the Apple specs page (posted below) the Min is 64MB and the Max is 512MB. Is that overall system, or per slot? I'm guessing it's per slot, since it has two slots and the Ram Sizes states it can handle a 512 chip (2 slots @ 512 ea. = 1024) am I wrong in this?
Thanks,
-Matt
RAM Slots: 2, PC100 DIMM
Min - Max RAM: 64 MB - 512 MB
Min RAM Speed:
RAM Sizes: 64, 128, 256, 512 MB
iMac DV 400Mhz 512Mb Mac OS X (10.3.9)

First ensure that you have the correct firmware installed. See Announcement: iMac (Slot Loading): Install iMac Firmware 4.1.9 Before Mac OS X 10.2 or later.
You will need OS 9 installed on the hard drive to install that firmware update. If OS 9 is currently on the hard drive you can install the firmware update (if needed) before swapping the hard drive.
Yes you can install OS 10.3 directly without installing OS 9. If there is any possibility that you will want to boot from OS 9 in the future, ensure that you pick the option to install the OS 9 disk drivers.

HT4904 imac 24-inch, Early 2009 can use hardware test over the net?

My imac keeps freezing on me over the more trivial things like youtubing or running apps I got for my toddler son. It's frustrating and I don't know if my hardware si to blame.
Can I run hardware test ove rthe web since I'm using mountain lion now?
Also It seems like this is already addressed but the fix doesn't fix it because al alredy have it installed:
About iMac EFI Firmware Update 1.4
This update fixes intermittent system freeze issues for iMac computers with ATI Radeon HD 4850 graphics and fixes wake-from-sleep issues in Boot Camp.

Also I want to point that they had this problem before : https://discussions.apple.com/thread/1978213?tstart=0
It was fixed with the new firmware but since I updated to Lion the problem started for me. Does you knwo if they eill release a new firmware update that takes care of the problem now?

IMac 27 Inch Early 2009 freezes periodically

For the last couple of weeks my iMac has been freezing and requires a hard reset to fix. On at least one occasion the screen flashed before it froze.

I have the same problems with my iMac 24" Early 2009 with the Nvidia GeForce GT 120 256MB MXM graphics card. I've done the usual and finally decided that it's a faulty card that only a replacement will fix. Oddly, when I'm home it's more stable when connected via a Displayport DVI adapter to DVI cable to a 24" Dell display. When standalone (like when travelling with my iMac for long stints out of town) it's unusable. It won't run for longer than 30 minutes then I get screen artifacts and freezes and then have to fsck to repair the drive before running it again.
However, I believe that I found the solution. I installed a program which I downloaded after installing XCode called Quartz Debug which has apparently allowed me to disable Quartz Extreme, 2D Acceleration and Quartz GL. I'm not sure which one of these changes has allowed my shaky iMac to run stably now for three hours, including a half hour running a flash game and to play about the same amount of the iTunes download of the movie Avatar, so I'm relatively confident that what I did is working. Both Flash and Quicktime seem to work fine although there does seem to be a bit of screen redraw lag when moving objects on the screen or opening new windows. Other features seem to work fine such as Dock magnification and the Scale and Genie effects.
To disable Quartz Extreme:
Install XCode and then under the XCode menu (the one to the left of "File") click on Open Developer Tool/More Developer Tools...
That will take you to this web page:
https://developer.apple.com/downloads/index.action?name=for%20Xcode%20-
(I don't know if just downloading QD will work without installing XCode, it might)
Select and dowload the package of Applications/Tools called:
Graphics Tools for XCode
Drag the Quartz Debug program to your Applications or Utilities folder. StartQuartz Debug. If you don't get the default tools window open when you start it, look under:
Window/Quartz Debug Settings
. . . and a window will open. You can also hit command-1.
In that menu I made these changes:
Deselected Enable Quartz Extreme
Checked the Disable 2D Acceleration
Checked the Disable radio button under Quartz GL
I am not confident that the settings will persist if I close the program. One website suggested that by forcing quit they will persist, but I'm just not sure. I'll experiment with this later and post again if no one else does. So for now I'm leaving it running and with these settings and no other changes.
I also applied the following changes in Terminal although I'm not sure that it did anything:
http://hints.macworld.com/article.php?story=20120211025246804
So far it's working. I'll follow-up as I have time and once I'm back home.
JoeL
Atlanta, GA

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer.

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!

Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router

IMac G3 won't boot after updating the firmware and upgrading the OS!

Hi! Everyone,
I have an iMac G3 333MHz (five flavors) which comes with 192MB of RAM and 6GB of hard drive. Originally, it was OS 8.5.1 installed, later upgraded to OS 9.2.2. Of course, the firmware has been updated by the appropriate method provided by the on-screen instructions before the installation of 9.2.2. After successfully updating the firmware and installing Mac OS 9.2.2, the system booted up and worked fine. However, after shutting it down and powering it up a few days later, I have encountered a critical problem:
1. At first, the iMac would chime and displayed a smiley-mac finder face.
2. No question mark appeared and the system halted because it stayed at the same screen for about 5 minutes! Also, the keyboard wouldn't respond. For instance, the LED signal light wouldn't light on when Caps Lock was pressed.
3. I assumed that this is just a typical crash and rebooted the machine via the "reset" button on the right side of the machine.
4. After restarting, well, no luck, the same condition. Therefore, I rebooted it again by using the method mentioned above.
5. The condition of sticking at the smiley-mac finder face occurred again! However, this time the iMac wouldn't chime and just displayed the mac face.
6. Another restart, well, it was getting worse... no chime and no smiley-mac finder face but a white screen.
7. I was frustrated then and shut the machine down forcefully by rebooting it again and pressing on the power bottom quickly before the screen appears. Also, I unplugged the power cord.
---------- After a few hours later ----------
8. Okay, I then plugged the power cord in and booted it up again, this time, it would chime but stuck at the white screen. => No smiley-mac finder face appeared!
9. Rebooted it again, the result was as same as step 8.
10. Another restart, the smiley-mac face finally appeared but still... stuck here and this time, no chime.
11. I then shut the machine forcefully by using the method mentioned above and let the machine rest for about a day with the power cord unplugged.
---------- After resting for a day ----------
12. I booted it up and it would chime, but no screen (the power button was orange, not green). I then forcefully shut down the machine.
13. Waited for about a minute and powered it up. This time, I tried to clear the PRAM, but no chime and gave me a white screen. => No luck! As mentioned, the keyboard's LED signal light wouldn't light on even though the Caps Lock key has been pressed.
*Note: The keyboard has been tested on the other computers and it worked. Also, I tried different USB ports to plug the keyboard in. => The USB ports were all in working condition， as I can know from the last successful start up.
14. Forcefully shut the machine down and tried to enter the Open firmware, no luck. It didn't enter and gave my a white screen.
15. Conclusion:
1) After resting for a while, the iMac would chime.
2) Rebooting too much times would cause the machine not to chime and leaded the screen to become white instead of the smiley-mac finder face.
3) However, rebooted the machine when the screen became white, the smiley-mac finder face would appear again without chime.
By the way, I could hear the hard disk spinning up so that means the hard disk is working.
Can anyone help me solve this problem? Is it related to the firmware update? Any suggestions will be appreciated! Thanks!
Andy

OK, I will try replacing the PRAM battery. Also, the PowerMac G3 and the other iMac 233MHz had the dead batteries. They are still working though... Should I replace them along with the iMac 333MHz? In case of not replacing, will they malfunction in future times? There are some symptoms on this two machines: 1. iMac 233MHz - No chime and no sound when adjusting system volume (the bi sound is not available), but iTunes and other applications can still use the audio device and output the sound via internal speakers; 2. PowerMac G3 450MHz - Will chime but sometimes hard to boot: 1) Chime but no screen; 2) No respond after pressing the power button => the power signal light won't light on. Every time I experienced this, I would open its case, pressing a small button (not quite understand what it does... anyway, just works if system halted.) near the PRAM battery and wait for about a minute, then close the case, and it boots. However, I have to reset "Date & Time"...

Boot Failure iMac G3 400MHz, goes on firmware mode :S

Hello everyone,
I recently bought a second hand iMac G3, 400MHz processor and 128mb ram, 10gb harddrive. I've always wanted a Mac just for the fun of it, and i finally got it. I dont think this imac is dead, but i'm having trouble on boot. It is not booting the traditional way, it is going down to firmware boot.
It gives this info:
MacOS: Boot Failure! (0xF3C481F6)
Mac OS: parcel initialization failure - bad checksum
Then i have 2 choices from the firmware for booting or shutting down 1. mac-boot command and 2. shut-down command.
So, i give it the mac-boot command; in starts showing the mac face for a few seconds, then it displays this message below of it:
/pci@f2000000/mac-io@17/ata-4@1f000/disk@0:5,\\:tbxi
after maybe a minute it finally displays the face and ? symbol; typical of not finding the system. Problem is that, even starting the imac with the system disc on it and pressing "c" at bootime, it still goes to the firmware thing...
Is there a way to tell the imac "hey dont boot at firmware, boot at cd!!" ??
Oh, by the way...during the "/pci@f2000000/mac-io@17/ata-4@1f000/disk@0:5,\\:tbxi" message I can still press the "alt" key and it shows me the retry arrow, the system harddrive labeled "Lorelai's comp", the system CD and the straight right arrow.... i try clicking on the harddrive and also on the CD icons to try to boot, but it only refreshes the screen changing from the traditional blue/purple background to a red-ish background and arrow/drive's buttons get funny colors...
i dont know what is going on....i dont think the imac is dead....i guess it has to do with that firmware booting default thing...
please help....
thanks in advance.

Hi again Kenichi,
Question: I've done that procedure yesterday, but i pressed the button for only 1 second 1 TIME ....can i make the procedure again despite if i did it 1 time before? or doing it again will crash the iMac forever?
About the black screen i told you before, here's the thing...if i place a battery on it and reset the nvram via keyboard commands or firmware commands, at the restart then is when the imac goes on black....BUT if i remove the battery, leave it there for a minute or 2, and then power it on, it goes to the firmware state again, ofcourse with good video on it....i dont think it has a video problem...but i dont understand why when making the reset procedures with a battery on the iMac this black-non starting screen keeps going...
Thanks in advance.

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle

My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Since updating to Maverick, my imac has become extremely slow. I have ran an EtreCheck and posted it below. Any help will be greatly appreciated. Thank you! Hardware Information:      iMac (24-inch, Early 2008)      iMac - model: iMac8,1      1 2.8 GH

Hardware Information:
          iMac (24-inch, Early 2008)
          iMac - model: iMac8,1
          1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          ATI Radeon HD 2600 Pro - VRAM: 256 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 5 days 20:20:57
Disk Information:
          Hitachi HDP725032GLA380 disk0 : (320.07 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 319.21 GB (96.82 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          HP Officejet J6400 series
          Nike FuelBand
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
          G-TECH OEM ATA Device 00 800mbit - 800mbit max
                    EFI (disk1s1) <not mounted>: 209.7 MB
                    G-DRIVE (disk1s2) /Volumes/G-DRIVE: 499.76 GB (96.69 GB free)
Thunderbolt Information:
Startup Items:
          CiscoTUN: Path: /System/Library/StartupItems/CiscoTUN
          HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.adobe.versioncueCS4.plist 3rd-Party support link
          [System] com.cisco.anyconnect.vpnagentd.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
          [System] com.adobe.CS4ServiceManager.plist 3rd-Party support link
          [System] com.cisco.anyconnect.gui.plist 3rd-Party support link
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [System] com.hp.help.tocgenerator.plist 3rd-Party support link
          [System] com.nike.nikeplusconnect.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items:
          iTunesHelper
          HP Registration Assistant
          HP Scheduler
          HP Product Research
          HPEventHandler
Internet Plug-ins:
          Flip4Mac WMV Plugin: Version: 2.2.3.7 3rd-Party support link
          FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          iPhotoPhotocast: Version: 7.0
          Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
          AdobePDFViewer: Version: 9.5.5 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Adobe Version Cue CS4 3rd-Party support link
          Flash Player 3rd-Party support link
          Flip4Mac WMV 3rd-Party support link
Old Applications:
          /Library/Application Support/Microsoft/MERP2.0
                    Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                    Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
          Solver:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
          /Applications/Microsoft Office 2011/Office
                    Open XML for Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Setup Assistant:          Version: 14.3.6 - SDK 10.5 3rd-Party support link
                    Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    SyncServicesAgent:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Graph:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    My Day:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          /Applications/Microsoft Office 2011
                    Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Excel:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Outlook:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Word:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5 3rd-Party support link
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 297.29 GB Disk used: 207.12 GB
          Destinations:
                    G-DRIVE Q [Local] (Last used)
                    Total size: 465.44 GB
                    Total number of backups: 177
                    Oldest backup: 2009-01-25 04:24:35 +0000
                    Last backup: 2014-03-17 21:35:38 +0000
                    Size of backup disk: Too small
                              Backup size 465.44 GB < (Disk used 207.12 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               9%          Microsoft Word
               3%          Adobe Illustrator
               2%          Nike+ Connect
               2%          WindowServer
               1%          EtreCheck
Top Processes by Memory:
          274 MB          Adobe Illustrator
          115 MB          Mail
          76 MB          Google Chrome
          72 MB          WindowServer
          45 MB          com.apple.WebKit.WebContent
Virtual Memory Information:
          52 MB          Free RAM
          666 MB          Active RAM
          611 MB          Inactive RAM
          322 MB          Wired RAM
          7.11 GB          Page-ins
          161 MB          Page-outs

You are only running on 2GB of RAM. IMHO 4GB woud be the minimum to realistically run Mavericks on, although the more the better.
Pete

Forcing iMac DV 400MHz (Early 2001) reflash the firmware

Similar Messages

Maybe you are looking for