Forcing iPad1 to full display on data projector

I read somewhere that there is possible to have full display of iPad 1 in data projector by about using some software "adaptation"... I´m not talking about jailbraking - I read it iSt absolutly legal... Anyway, I'm totaly rookie on this...
Could anyone please help me?
Thanks for you time and patience.

Most likely either there's a bad cable or adapter, or an adaptor or connection cable aren't firmly plugged in. If you have a VGA monitor available, test with that. If the problem persists there, one of the cables or possibly the port on the MacBook is bad.
Hope this helps.

Similar Messages

My Macbook Mavericks pro does connect well to a data projector, even after following the process recommended, what is the optimum display settings? Has anybody else had this problem, I'm close to going back to PC's

My Macbook pro Mavericks does not connect well to a data project even after following the recommended process, Has anybody else struck this problem, what is the optimum display setting? Im close to going back to PCs

You said " digital AV Adapter and thunderbolt". Do you mean Thunderbolt/min displayport to HDMI adapter?
It appears you are using the free version of the Display Menu app.
What does the Apple Display properties show? System Preferences>Displays>Display show?
Look at the projector/go to the manufacturer's support site and find the native resolution of the projector.
Googling for Sori data projector id not produce any hits

Can I connect an iPad in such a manner to a Windows based PC so that all that I write on the iPad, is immediately displayed on the Windows PC and on a screen by using a data projector?

Can I connect an iPad in such a manner to a Windows based PC so that all that I write on the iPad, is immediately displayed on the Windows PC and on a screen by using a data projector?

In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
iTunes does prompt when it is going to erase a device, and the message is clear.
She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
She marked this as a solution, so it worked for her.

How to display all dates of month in oracle forms..pl send full code

hai every one.
i have multiple rows of block.
i want to display all dates in that block.

Hello,
+1. Complete Forms Solution described in the Dynamic poplist in a multi-record item. thread.+
This solution is based on dynamic list population with appropriate predefined record group (the number of such predefined record groups could be rather big --> 1 Continents*Countries.+
Record Groups can be totally dynamic, so you don't need to have them pre-existing at runtime.
Francois

Display all dates between date range (Time Dimension left outer join Fact)

All,
I have done some searching around this issue but within all the posts regarding date variables, date prompts and date filtering I haven't seen one exactly answering my issue (maybe they are and I just dont have my head around it correctly yet).
My report requirement is to allow a user to select a start day and an end day. The report should show all activity between those two days - AND display 0/null on days where there is no activity. That second part is where I am getting hung up.
The tables in question are:
TimeDim
EventFact
CustomerDim
My BMM is setup as follows:
TimeDim left outer join EventFact
CustomerDim inner join EventFact
If I run a report selecting DAY from TimeDim and a measure1 from EventFact with day range 1/1/2010 - 12/31/2010 .. I get a record for every day and it looks perfect because of the left outer join between TimeDim and CustomerDim.
But .. if I add in a field from CustomerDim, select TimeDim.DAY, CustomerDim.CUSTNAME, EventFact.MEASURE1, OBIEE only returns records for the days that have EventFact records.
This is due to the fact that the TimeDim is still outer joined into EventFact but adding in CustomerDim makes OBIEE setup an inner join between those tables which then causes only data to be returned where EventFact data exists.
There is a way around this in this simple case and that is to define the relationship between CustomerDim and EventFact as an outer join as well. This will give the desired effect (but an outer join between these two tables is not the true relationship) and as I add additional dimensions and add additional logical sources to a single dimension in the BMM it gets complicated and messy.
Ive also messed with setting the driving table in the relationship, etc.. but it has not given the desired effect.
Has anyone ever encountered the need to force display all dates within a specfied range with a fact table that may not have an entry for every date?
Thanks in advance.
K
Edited by: user_K on Apr 27, 2010 11:32 AM

It worked!!!* Even my time drill downs and date based filtering still work!
That is awesome. Never would have thought of that intuitively.
Now, just need a little help understanding how it works. When I run my report and check the logs I can see that two queries are issued:
Query 1: Joins the fact table to all the associated dimensions. I even changed all the relationships to inner joins (which is what they truly are). And calculates the original measure. If I copy and paste this query into sql developer it runs fine but only returns those rows that joined to the time dimension - which is what was happening before. It is correct but I wanted a record for every time dimension record.
Query 2: Looks like the following:
select sum(0)
from timedim
where date between <dateprompt1> and <dateprompt2>
group by month *<--* this is the time dimension level specified in Query 1, so it knows to aggregate to the month level as was done in query 1
Final Question: So what is OBIEE doing ultimately, does it issue these two requests and then perform a full outer join or something to bring them together? I couldn't see anywhere in the log a complete query that I could just run to see a similar result that I was getting in Answers.
Thanks for all the help .. Id give more points if I could.
K

How to display dynamic datas and double datas (chart)

Hi all !
I would like to display dynamic datas and double datas by using charts.
However, it doesn't work and I don't understand why.
Can you help me to fix that ?
Best regards,
- John
Attachments:
double_dynamics_data.vi ‏54 KB

Hi John,
the sine looks like it should look with your VI!
You convert the DDT to a scalar DBL. That conversion will only use the first sample of the generated sine waveform - usually this is always the same (offset) value when you generate full periods… Or to put it in a mathematical expression: sin(0°)+4 = 4!
When you want to display waveform you should work with waveforms!
Actually, I have used Dynamic data type in order to simulate an signal.
Well, I also simulated a signal in my example VI. I didn't use any ExpressVI to do so…
In a few weeks, I will receive a sensor. I will use in LabView 'DAQ Assistant' whose the ouput is a Dynamic Data.
Nobody forces you to use the DAQAssistent ExpressVI. There are nice DAQmx functions available and LabVIEW comes with a lot of ready-to-use example VIs…
That's why, I used in first place, the 'Simulate signal'. So I think I should keep Dynamic Data Type
I do think you don't need to use the DDT. I think it's better to understand what is going on in your VI. And I think the DDT will be no help for you…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

DEFECT: (Serious!) Truncates display of data in multi-byte environment

I have an oracle 10g database set up with the following nls parameters:
NLS_CALENDAR      GREGORIAN
NLS_CHARACTERSET      AL32UTF8
NLS_COMP      LINGUISTIC
NLS_CURRENCY      $
NLS_DATE_FORMAT      DD-MON-YYYY
NLS_DATE_LANGUAGE      AMERICAN
NLS_DUAL_CURRENCY      $
NLS_ISO_CURRENCY      AMERICA
NLS_LANGUAGE      AMERICAN
NLS_LENGTH_SEMANTICS      CHAR
NLS_NCHAR_CHARACTERSET      UTF8
NLS_NCHAR_CONV_EXCP      TRUE
NLS_NUMERIC_CHARACTERS      .,
NLS_RDBMS_VERSION      10.2.0.3.0
NLS_SORT BINARY
NLS_TERRITORY      AMERICA
NLS_TIMESTAMP_FORMAT      DD-MON-RR HH.MI.SSXFF AM
NLS_TIMESTAMP_TZ_FORMAT      DD-MON-RR HH.MI.SSXFF AM TZR
NLS_TIME_FORMAT      HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT      HH.MI.SSXFF AM TZR
I am querying a view in sqlserver 2000 via an odbc database link.
When I query a 26 character wide column in the view in sql developer, it will only return up to 13 characters of the data.
When I query the exact same view in the exact same sql server database from the extact same oracle database using the exact same odbc database link using sql navigator, I get the full 26 characters worth of data.
It also works just fine from the sql command line tool from 10g express.
Apparently, sql developer is confused about how to handle multi-byte data. If you ask it the length of the data in the column, it will tell you 26, but it will only show you 13.
I have found a VERY PAINFUL work around, to do a cast(column_name as varchar2(26) when I query it. But I've got hundreds of views and queries...

In all other respects, the settings I have appear to be working correctly.
I can enter multi-byte characters into the sql worksheet to create a package, save it, and re-open the package with the multi-byte characters still visible.
I'm using a fallback directory for my jdk with the correct font installed, so I can see and edit multi-byte data in the data grids.
In this case, I noticed the problem on a column that only contains the standard ascii letters and digits.
Environment->Encoding = UTF-16
All the fonts are set to a font that properly displays western and ge'ez characters. The font has been in use for years, and is working correctly in all other circumstances.
The Database->NLS Parameters tab under sql developer preferences shows:
language: American
territory : American
sort: binary
comp: binary
length: char (I've also tried byte)
If there are other settings that you think might be relevant, please let me know.
I've done some more testing. I created an oracle table with a single column and did an insert into ... select from statement across the database link. The correct, full-length data appeared in the oracle table.
So, it's not a matter of whether the data is being returned or not, it is. It is simply not being displayed correctly. It appears that sql developer is making some unwarranted decisions about the datatable across the database link when it decides to display the data, because sql plus and sql navigator have no such issues.
This is really a very serious problem, because if I cannot trust the data the tool shows me, I cannot trust the tool.
It is also an invitation to make an error based upon the erroneous data display.

ECT List View Web Part displaying incorrect data when View Item

I have a External Content Type which pulls data from a stored procedure. The stored procedure has 1 parameter - the users logon id. The data retrieved is a list of meetings with start date time, end date time, location, subject, etc. From this ECT there
is an External List which displays all data correctly.
There is 2 pages within the site and its subsites that have list view web parts which display a subset of the info from the external list. When the user clicks a specific meeting to display the complete info on the meeting, the wrong information is displayed,
it always displays the info for the 1st meeting in the list. So, I displayed the BDC Identity field on the list and this field is identical for all the rows since the key for the ECT is the username and hence not unique.
I've spent all day trying to finding a way to resolve this and have come up empty. I've tried to find a way to make the BDC Identity field to be unique, using Business Data View web part, Data View web part, and nothing.
The user needs to be able to click the My Meetings url header on the above pages to see a full list of their meetings so I need the external list. Any ideas how to make the BDC Identity field unique or how to get the View Item on the List View web part to
work correctly?

Sorry, I do not understand what you mean.
I resolved the non unique BDC Identity problem by simply adding the row # to the Username in the stored procedure so the BDC Identity fields on the list records are now unique (although they're really long ie. __bk44003500070057003700560027000200140037003700f600360096001600470056003300,
__bk44003500070057003700560027000200140037003700f600360096001600470056004300 etc). Not sure how it generates the BDC Identity?
I still see the same behaviour when you select a meeting to display the details. It always displays the 1st record in the list.
I added code to the DispForm to display the ID when the page loads and the BDC Identity from the record and verfied that they do match.
I can add another parameter to the stored procedure and just return the row # in that field. What do you mean by make the identifire as Identity in operations?

Apple VGA Adapter, with iPad 1, OS 4.3 upgrade and Data Projector?

Hi,
Our school is testing a number of iPads, and I will be buying a iPad 2 on the 25th March. I would like to test my iPad 1 with the Apple VGA Adapter and my data projector in my classroom. (All Apps)
In the past the Apple VGA adapter did not mirror the apps, however the Apple site now has a link to mirror technology with the VGA Adapter.
I could buy the Apple Digital AV Adaptor (HDMI) but would then need to find a HDMI to VGA convertor to connect to my data projector.
I would love to show my students Garage Band on my projector, but need the correct cables.
Regards
Sean
Shalom College (www.shalomcollege.com)
QLD- Australia.
Overview: http://store.apple.com/au/product/IPADVGAADP?mco=MTc4MzkwOTA
Use the Apple VGA Adapter to mirror whatever’s on your iPad 2 screen — apps, presentations, websites, and more — on your VGA-equipped TV, display, projector or other compatible display in up to 1080p HD.
Watch slideshows and video on the big screen in up to 720p by connecting your iPad, iPhone 4, or iPod touch (4th generation) to a television, projector, or other VGA-compatible display.
The Apple VGA Adapter connects to your iPad, iPad 2, iPhone 4, iPod touch (4th generation), iPad Dock or Universal Dock via the dock connector and to your projector or display using the VGA adapter.
What's in the Box
Apple VGA Adapter
Message was edited by: seanudal

I know this thread isnt that recent but the answer can be found when you look at the VGA adapter product page mention in an earlier post:
"The Apple VGA Adapter mirrors exactly what you see on iPad 2 so that everyone in the room can enjoy it.
The Apple VGA Adapter supports video out (only) for iPad, iPhone 4, or iPod touch (4th generation)."
So there you have it - only video out is supported on the original iPad / iPhone 4 / iPad Touch.

How to fetch the data & display the data if fields got the same name in alv

hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028

Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal

Connecting to a data projector

I am going to be traveling and using a data projector to display things from my new macbook pro. I want to know if there is an additional cable I need to connect to a standard data projector that is typically connected to a computer by a cord with a rectangle head and two rows of prongs that tighten to the back of a windows computer.

I waded my way through all the options of connecting my Macbook Pro 2012 model to a data projector. Eventually I bought the following on Amazon. Simpe and effective.
Proxima Mini Displayport to VGA Adapter for Apple Macbook Pro Air - Top Quality - Thunderbolt Compatible
by Proxima Direct®
3.6 out of 5 stars See all reviews (20 customer reviews)
Price:
£16.98
Sale:
£1.95
You Save:
£15.03 (89%)
In stock.
Dispatched from and sold by Proxima Direct.
The Mini DisplayPort to VGA adapter lets you connect an advanced digital monitor, projector, or LCD that uses VGA connector or cable to a MacBook, MacBook Pro, or MacBook Air
Mini DisplayPort 1.1a compliant receiver offering 5.4 Gbps bandwidth over 2 lanes.
Tegrated triple 10-bit, 162 MHz video DAC for analog VGA signal output
Supports 1080p, 1920 x 1200 reduced blanking resolution. EDID pass-through from source to display.
Powered by Mini Displayport source - Approx Length 15cm *** LIFETIME WARRANTY ***
› See more product details
Curry's charged me £25.00 for the wrong cable and I struggled to return it so never supporting them again.

PB not deteting data projector

Hi,
My laptop is not detecting an external data projector. It sees the projector at the initial startup during the gray screen and apple icon. But as soon at the Mac OS X startup icon appears it drops the signal and the projector screen turns blue. The Apple Profile Graphic/Display information status is "No display connected". I tried multiple projectors and dvi-vga adaptors with the same results.
The laptop does work with a 15-inch external monitor and the information is displayed under Apple profile.
I see on your board that someone else had a similar problem, but didn't find an answer posted.
Any suggestions?
thanks, David

Hi, David. If your video processor is an ATI Mobility Radeon 9700, you have a 15" or 17" Aluminum Powerbook of recent vintage. This is the discussion area for the older Titanium Powerbooks. You will probably do better reposting in an appropriate Aluminum Powerbook forum, accessible from this page.

Purchasing mini data projector for MacBook Pro. What works together?

I want to purchase a mini data projector for my MacBook Pro. Does anyone have a recommendation of what I should look for in a projector or what would work with my MacBook? Is a MacBook a VGA display? I want a data projector that is very sharp. Any suggestions?

if you do not have a Mini DVI, that leaves only about 80 models of MacBooks.
Which one do you own?

Colour distortion when running Keynote through data projector

I regularly hook my MacBook up to a data projector, using (I think) a DVI to VGA connector, without any problems; have recently found some problems with colour distortion, though, to the point of everything on the data projector display appearing in shades of blue. Running the attached PC through the data projector, everything was absolutely fine, so it seems to be a problem with my MacBook display settings? Any suggestions for a quick fix?
Thanks!

When you bring up the monitors control panel, does it show on BOTH screens (internal and projector)? It should, and if you're not mirroring, ONLY change it on the projector. Make sure it matches the default for the projector. There no reason it shouldn't work, but that's the first place to check.

Connecting the ipad to a data projector when projector is on the ceiling

I am trying to connect the ipad to a data projector when projector is on the ceiling. I have the VGA cord but it is way to short ...is there another cord to connect the both?

It is my understanding that the dgital adapter will give you full video mirroring over HDMI from the iPad 2, although there are some reported models of TVs and projectors that have issues, but that analog signaling, such as VGA, is limited to apps specifically written to provide access to that type of video connection.

Forcing iPad1 to full display on data projector

Similar Messages

Maybe you are looking for