Forcing me to activate again

I upgraded to an iPhone 4S. When I reveived the phone, I activated it through Verizon.com, did *228 on it then hooked my old device back up. NOW, when I try to switch from my old device and try to activate the phone I purchased full retail from eBay, the activation page is forcing me to activate the iPhone 4S when I've already done so. It is NOT allowing me to bypass the page nor enter the serial # on my new phone. What do I need to do? I already sold the iPhone and it has been mailed..
Also note, I did live chat with a Verizon employee and was told I was 100% able to do as I please with the phone if I activated then deactivated it. I did so, and now I'm having problems.

It's forcing me to verify that I've received the phone.
I was told by a Verizon rep via live chat that I have 30 days to activate the phone from order date, or I have to activate and deactivate to get by the 30 day rule, which I did... Order and ship date was 11/11, I activated BOTH upgraded iPhone 4S's ~10 to 12 days after that date. I then deactivated them and, without any problems, hooked my old devices back up and am now being forced to verify and activate them again. Pic link here http://farm8.staticflickr.com/7008/6409067551_54a138d978_b.jpg

Similar Messages

  • I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note.  I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds.  I can't get rid of it.  I have

    I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note.  I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds.  I can't get rid of it.  I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch.  But, Notes will not stop.  It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.

    Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.

  • HT4113 iOS: Forgotten passcode or device disabled after entering wrong passcode and I don't have the computer where i sync first time my iphone how can I activate again

    After entering wrong passcode and I don't have the computer where I sync first time my iphone
    How can I activate again in other computer?
    Thank you
    Have a great day

    itzcoatlcarrillo wrote:
    After entering wrong passcode and I don't have the computer where I sync first time my iphone
    See here  >  http://support.apple.com/kb/HT1212
    In particular... here... If you have never synced your device with iTunes

  • Was forced to install Adobe again (maybe just update it) and can't get past step 3/3 because its forcing me to buy it. now its half installed and i need to agree to terms and conditions..

    was forced to install Adobe again (maybe just update it) and can't get past step 3/3 because its forcing me to buy it. now its half installed and i need to agree to terms and conditions..

    Let's start with what you are trying to install. Adobe Reader is free, so it won't be forcing you to buy anything. So
    - What are you trying to install (full name, please, Adobe make lots of things)
    - What system (e.g. Windows 7, Mac OS Lion, iPad...)
    - Where do you go (what web address) to start off?
    - Why were you "forced" to do this?

  • I tray to updet my iphone 3gp but i lost all i canot activate again how can i activate ?

    i tray to updete my iphone 3gs, but i lost all application i canot activate again how can i activate again?

    All this ' lost  ' information should be on the computer you have regularily been Syncing and Backing up to...
    See Restore from Backup here  >  http://support.apple.com/kb/ht1766

  • HT5622 helo sir i have apple iphone 5 nd my icloud id is lost .nw my phn is deactivate.  i try to manytimes activate without icloud a/c but its nt working ,so bad for me. can you tell me how can i reset my iphn or .activate again without apole id nd iclou

    helo sir i have apple iphone 5 nd my icloud id is lost .nw my phn is deactivate.  i try to manytimes activate without icloud a/c but its nt working ,so bad for me. can you tell me how can i reset my iphn or .activate again without apole id nd icloud a/c

    helo sir i have apple iphone 5 nd my icloud id is lost .nw my phn is deactivate.  i try to manytimes activate without icloud a/c but its nt working ,so bad for me. can you tell me how can i reset my iphn or .activate again without apole id nd icloud a/c

  • Table can not activate again after changing

    Hi, everybody
    For some reason that we create one more field call EKORG(Purchasing organisation) in table LFA1 and made choice for both Key and Initial value. Now, we are going to delete this field and activate table again, system show the following message, please kindly give us a hand and let me know how to solve this issue in more detail. We  use T-code: se14 and try to Activate and adjust database that system show the same message as below.
    Thanks you All.
    <b>Primary key change not permitted for value table LFA1
    Message no. AD300
    Diagnosis
    This table is defined as a check table. For reasons of consistency, changes to the primary key of the table are not allowed.
    Procedure
    If it is essential that you change the primary key, you must delete the relevant foreign keys. Refer to the where-used list to find all tables containing a field that is checked against this table. Delete the foreign keys for these fields.
    If necessary, maintain the deleted foreign keys again.</b>
    Message was edited by:
            Alfred

    Alfred,
    If you can't figure this out you should stop what you are doing and get help from someone who knows how to fix this mess.  I'll give you a hint, it isn't Programs...  And it might be something to do with tables...  Once you've got a list of all tables where LFA1 is used you will have to check them 1 by 1 to see if they use LFA1 as a check table.
    I'd still love to know what posessed you to mess around with the primary key of a standard SAP table?  And I'd also love to know why everyone is giving you help and suggestions on how to activate the table whilst no-one seems to care that you are changing a standard SAP primary key.  I can't believe you managed to get an access key to change the table in this way and no-one in your company/client questioned what and why you were doing it!
    LFA1 is a pretty important table in the SAP system (Vendor Master table) so to mess around with its primary key is utterly ridiculous.
    The only thing you should learn here is that changing SAP standard objects is usually a no-no.  Trying to change the primary key on a standard SAP table is a complete no-no.  There must have been an alternative to whatever it is you are trying to achieve.
    Gareth.

  • Why won't my iMessage activate again?

    My Imessage has been acting up so I turned it off and back on again to see if it would help but now it will not activate again

    See this support document for activation issues. iOS: Troubleshooting FaceTime and iMessage activation

  • HT1212 I CHANGED MY PASSWORD WHEN I HAD RESET MY IPHONE NOW I CANT ACTIVATE AGAIN AS IT SHOWS "' CANNOT BE USED TO UNLOCK THIS IPHONE"'

    hello sir
    i recently changed my password and when i had reset my iphone now cant activate my iphone again
    please help me on this issue
    I CHANGED MY APPLE ID PASSWORD

    You need to contact the seller. If they are the original owner of the phone, they need to remove the device from their iCloud. You cannot get past Activation Lock. Only the original Apple ID and password used to activate the device can be used. If you cannot get the original owner, then return the phone for a refund. It will be useless to you.
    This explains Activation Lock to you http://support.apple.com/kb/HT5818 and this http://support.apple.com/kb/TS4515 explains what it is that you have to try and do. Either way, it requires the original Apple ID and password.
    Message was edited by: ChrisJ4203

  • 10 months after activation, iPhone is asking me to activate again?

    Today, I was using my phone when all of a sudden, it restarted and asked me to activate my phone again. When I try to do so, it states that the activation servers are busy and it is unable to activate at this time. I've tried restoring the phone, but it just goes back to the activation screen again.
    Has anyone had the same problem?

    Thank you

  • HT4623 My phone won't activate again and I don't know what to do.

    It keeps saying "Your iPhone could not be activated because the activation server cannot be reached. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes." It's connected to iTunes right now but it's still not going and I kind of need my phone to work again...

    Im not suprised. Millions of people are doing the update and activation so the servers are probably over loaded.
    I would restart the phone and try activating it again periodically.  I kept getting that error message and just kept trying every few minutes, and eventually it worked.
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    http://support.apple.com/kb/ht1430

  • After typing master password in session can I force typing master password again without ending current session and starting new session?

    Sometimes after using the master password to access an account during a given firefox session I would like to "revoke" this ability for automatic access (i.e. require typing the master password again) without having to end the current session and restart firefox.
    While it is nice to only have to type the master password once per session, there are times when after starting some action I would like to leave the browser unattended for a short time but prevent others from accessing sensitive information at other sites if they do not know my master password. Note this is not the same as "locking the browser." Presently the only way I know to force this is to kill the current session and restart the browser but this is not very satisfactory if I actually want to stay connected (authorized) at a particular site. I would hope that adding a button on the security tab to "require master password for current session" would be a simple fix to implement? Thank you for your attention.

    While waiting for a response to this question, I stumbled upon a partial (good workaround) answer to my question in the form of a Firefox addon, Master Password Timeout [https://addons.mozilla.org/en-US/firefox/addon/master-password-timeout/ ]. Among other things it adds "Logout Master Password" as an option under the Firefox "Tools" menu which then gives the functionality I was looking for.
    It seems to me though that this is a basic security option that would be good for a general Firefox user to be aware of since leaving a browser open unattended with no master password required could easily lead to trouble. Before finding this addon I was not aware that Firefox 4 had a 30 minute default timeout for the master password. At least in my case I have left Firefox going overnight on home computers and have not had to retype the master password the next morning... so somehow I missed having this "default" set when I upgraded to Firefox 4.

  • How do I get my 3G s to try and activate (again)

    I sync at home but tried to activate here at work. iTunes found my number but said it might take up to 48 hours. OK, fine. I tried plugging it back in and no screen came up saying it was trying to activate. Called 1-800-MY-IPHONE and was told they never have been asked that question. Any ideas, anyone.

    Call AT&T, they have an Apple Activation tech. Mine was hanging on the notice to wait...activating This could take a while. I waited, and got worried when some people posted that they thought it would be 48 hours. I called AT&T and they put me through to one of the activation techs who helped me, and now my phone is activated. Give it a try. They seemed to be very helpful.

  • Why am I forced to by apps again once new versions are released?

    I own an iPhone 4s and just upgraded to a 6. Obviously, I want and expect to use the apps I have purchased. Now that everything is stored in the cloud with my id I figured, no problem. Not with two apps. Not only can I not transfer them with my Mac using iTunes but when I go to the app store I am asked to buy them again! What kind of scam is this? There is no reason why I should have to pay to download apps I already own just because I upgraded my phone. This is extortion at its finest! Very disappointing from a company that prides itself on customer service.

    Make a list of the affected apps, it would help to know what they are.
    I suspect you are finding apps that updated to iOS 6 version via paid updates. I suspect the previous copies are too old to be able to run on iOS 6, what iOS did they come from?
    Sadly Apples lousy app store rules prohibit upgrade pricing, so you have no choice to pay again if you want these apps. You also can't go back to an earlier iOS.
    Welcome to the walled garden.

  • Programs won't open, uninstalled, reinstalled, can't activate again???

    Original problem:  I have been using my programs with no problem on my primary laptop for over 2 years. Last month, my laptop needed to be repaired, so we did not have it for 1 month. During that time, I needed to finish a project for a wedding, so I installed the CS2 package on my second laptop . I did not activate it, as I knew I would not leave the programs on that computer, and I uninstalled the programs before the 30 days period was up - thinking this would cause no problems. I have gotten my primary laptop back and I can not open any of my Adobe programs now. A couple of them will "think" for a few seconds, then give me a message saying the program has stopped working. A couple of them will go through the whole process to open, then immediately close. I tried to uninstall the programs to see if a reinstall would help. Initially I could not uninstall them (I could select CS2 in Control Panel and click uninstall - it would spin the cursor for a few seconds and then do nothing), but I had to delete all of the files in Program Files before my computer would uninstall the package. I was able to uninstall and then reinstall the CS2 package. Indesign opened up for me after that one time that night. The next morning, it was back to the same initial not-opening problem. Is this an activation problem? What is going on?
    NOW:  I was advised by the Adobe people when I submitted the question that (1) they can't help me anymore since I'm using CS2 and that's out of the support cycle.  but (2) I should uninstall the Suite, delete all the folders from some specified locations, reinstall, and he was sure it would work for me.  I did all that and now, when I get to the activation screen and I click on Activate Now, it immediately tells me whatever program I was trying to open has stopped working.  I try to Activate by phone, it closes immediately then too.
    Please somebody help!!  I have no idea what to do and am so frustrated with not being able to find any help because we're "out of the cycle."  I'm feeling stranded with a very expensive program I cannot use and a lot of stuff I need to use it for!
    Operating System: Windows Vista
    Computer = HP Compaq nx9420 bought in 2006
    What else do you need to know?!
    - Diane

    Try this page
    http://kb2.adobe.com/cps/405/kb405970.html

Maybe you are looking for