Forcing output via VGA on a MBP

So I have four monitors hooked up via an active VGA splitter, only problem is that while my MBP recognizes the VGA adapter (screen fades blue for a second) it refuses to actually output any image to the VGA port.

I am having the same problem. It seems to be an apple hardware problem. I find it very fustrating that all the windows driven computers i have been using over the many years have NEVER had any problem with output on external vga device.
how on earth can you use this computer for presentation when it simply dont work? (using DVI works with out any problem at all, its only related to VGA)
I have searched the internett and found out that the seems to be some devices it works on and some it don't. Maybe it outputs too low power on the vga?? but apple, can you fix this problem?! its very fustrating and it seems to me that there are sevral people having this problem. if this problem still persist, i have to drop using MBP's in the company i work, and move back to hp or lenovo.

Similar Messages

  • Lost full hd resolution output via VGA to monitor

    Hello Everyone,
    I was happily recieving full hd output from my macbook to my monitor via a VGA cable. I then disconnected the VGA cable (and the connected mini-displayport to VGA adaptor) from my macbook. I then plugged them back in as before. However, this time I can no longer select 1920*1080 (Full Hd) from my macbook's display settings for my external monitor. What went wrong?
    Thank you

    Not sure; you may try and check all settings after a reset
    of the System Management Controller (SMC) to see if
    that makes a difference. Or spend some time with a whole
    pile of things, as some of us said in the early Mac OS X
    days, throw the kitchen sink at it.
    Boot into SafeBook mode, repair disk permissions, check
    or verify the hard drive, get a coffee. Check the wires to
    see if one of them went on permanent vacation, & so on.
    Looking at 1:14AM here, so not sticking around...
    Good luck with taming gremlins!

  • Video Output via VGA "not authorized"

    I have the VGA output cable for my iPad, but on my newer videos, it gives me an error message that the display is not authorized to view the content. Do you perhaps know how to authorize a display?

    Rental movies and maybe some other purchased videos will not display on video out because of licensing reasons. There is really nothing you can do.

  • Static electric shock when hooked up to TV via VGA

    I have a 2007 MacBook Pro and have been hooking it up to a new Samsung HDTV via the display output to VGA, as well as the audio out port. I have been streaming video off of Hulu or Netflix and after about 20 minutes of me sitting on the couch away from the computer and TV, I get up to cue the next TV show or change something with the computer and I get an electric shock when I touch the computer.
    Any thoughts on what may be causing this? Its not the biggest deal but I don't look forward to it every time that is for sure.
    Thanks in advance.

    C Rob 44 wrote:
    So is the solution just to wait till the seasons change?
    Not sure if either one of us would call that a solution, but if it is static, the problem should get less and less as winter wanes and humidity rises (depending on what climate you're in, of course). I can't recall seeing any in the recent past, but there used to be products available claiming to lower static in households. I've never looked into them. I do try to be careful and touch something else grounded before touching my MBP as electronics and stray electrical charges are not a particularly good combination.

  • ATV2 on SD Projector via VGA?

    I know VGA output cannot be adapted to HDMI without a converter box, but can it work the other way around? Obviously the picture wouldn't be 720p, but would I be able to display the ATV2 output with a HDMI to VGA adapter? And would the audio work? The projector can display 16:9 (4:3 native) if that matters. Thanks.

    VGA doesn't carry sound, so you would need separate sound connection........... I assume you use one now since there is no mention of HDMI. The picture will transmit via VGA.

  • T61p and 1920x1080 via VGA?

    I have Thinkpad T61p (6457-CT0) with NVIDIA Quadro FX 570M and internal LCD with 1680x1050 running on XP SP3, and now I bought Samsung SM2333HD 23” external LCD monitor with 1920x1080 (HDTV) resolution and I want to use dual view (int. 1680x1050 + ext.  1920x1080). The problem is when I connect ext. monitor via VGA with 1920x1080 - picture on ext. monitor is cropped from left, smaller and positioned beyond borders of visible area. Picture adjustments aren’t helping at all. When I lower resolution to 1680x1050 it is ok, but the image is blurry because it’s not native resolution of ext. monitor, so I don’t want to use it. When I try only ext. monitor with 1920x1080 with disabled internal LCD, there is still the same problem, and on 1680x1050 picture is ok, but blurry. Resolutions higher than 1920x1080 are not possible in Display Properties/Settings/Screen Resolution settings or in NVIDIA Control Panel.
    I have borrowed Thinkpad Advanced Mini Dock with VGA and DVI output, and when I use DVI to connect ext. monitor, everything works fine and picture is ok, but via VGA on docking there is the same problem.
    I have latest drivers for NVIDIA Quadro FX 570M from Lenovo 6.14.11.7715 (2009-01-08), and latest IBM Presentation Director 4.03 (2009-02-12), but I have also tried with older drivers and Presentation Director, but it’s all the same, only picture is differently cropped, smaller or wider. Also, strange thing is when I, , try to make a new Display Scheme in IBM Presentation Director on internal LCD + ext. monitor via VGA, it offers max. resolution of 1680x1050, which is not the case with DVI.
    Just to be sure, I connected T61p via VGA to LG 32” full HD LCD TV, the picture has identical problems, so it’s not up to monitor. I have also tried to connect HP 6710b laptop via VGA to same Samsung SM233HD monitor and there are no problems, it can produce 1920x1080 with clear picture. I have also connected T61p via VGA to Lenovo L220x monitor, and now Display Properties/Settings/Screen Resolution settings (other than 1680x1050) offer 1920x1080 and 1920x1200 resolutions. When I set 1920x1080 the problem is identical, but when I select 1920x1200, picture is ok.
    So my conclusion is that T61p is not capable of producing 1920x1080 via VGA correctly, although it can produce 1680x1050 and 1920x1200. The main difference is that 1680x1050 and 1920x1200 are 16:10, but 1920x1080 is 16:9, so I am guessing that VGA output on T61p has problems with 16:9? Or is there problem with sending analog signal via VGA when it exceeds internal LCD native resolution (1680x1050) only for some resolutions? I have tried searching Internet and forums, but there are no answers. Maybe it is the problem when internal LCD is 16:10 and external monitor via VGA is 16:9 and I use dual view? I think there should be no problems with Quadro FX 570M and I don’t want to buy Thinkpad Advanced Mini Dock just because 1920x1080 only works with my monitor via DVI which is present on casing of T61p (and because it’s firm’s laptop, not mine). Do you have any suggestions what is wrong with graphics adapter, drivers or VGA output or how can I solve it?
    Solved!
    Go to Solution.

    Through NVIDIA Control Panel, which you should have if you installed drivers.. You can get it via Display Properties -> Settings tab -> Advanced button -> Quadro FX 570M tab -> Start the NVIDIA Control Panel.
    In NVIDIA Control Panel on the left side in the tree select Display, Manage custom resolutions, select external display on the right and click Create...
    In the Custom Resolutions window click on Advanced >> and (in Back-end parameters section) in Timing Standard select Manual. You'll be able to enter (in Advance Refresh Rate Parameters) under Desired refresh rate value from 59.500 to 60.499. I have tried 59.500 and it worked... You can also try to change other settings, if you understand the meaning. There is a Test button in the upper right corner.
    Hope it helps...

  • X3100 and 1080p via VGA

    How can it be that the DELL Latitude D630 I got from work can output glorious 1080p on my Samsung FullHD LCD-TV via VGA, whereas my new Macbook 2.4 cannot? They both have the same video adapter (Intel GMA X3100)... Apple: can we still say "It just works" ?!?!

    In other posts people often talk about installing softwares like SwitchresX. I do not like that... Why should I buy an additional software to make something as basic as connecting a laptop to an external monitor?
    I have even read of people that have installed Vista on their Macbook and then got 1080p right away, while still not being able to get it in Mac OS with exactly the same equipment... I am a bit annoyed by this situation
    Any help will be much appreciated!

  • Sanyo 26" HD LCD DP26640 - digital via VGA?

    I own a Sanyo 26" DP26640 that I've used with a Mac Mini (HDMI to HDMI) for almost 2 years. One of the HDMI ports has become dislodged from the inside and I'm exploring using the VGA port.
    I've found several cables (HDMI to VGA and Thunderbolt to VGA), but they all indicate that they will only work if the TV supports digital output via the VGA port.
    Does anyone know if this TV supports digital output via the VGA port? Thanks in advance.
    Solved!
    Go to Solution.

    If the vga looks like this ( minus the blue of course )
    http://upload.wikimedia.org/wikipedia/commons/thumb/9/92/SVGA_port.jpg/220px-SVGA_port.jpg
    then it is analog
    I am not affiliated with Best Buy nor have I ever been employed by Best Buy. All of my thoughts and posts are of my own opinion and personal experience.
    I may not always know the right answer, but I will always tell you what I do know. I also do free computer analysis and consultation via private message.

  • DreamColor Monitor from PC via VGA: Color-Space & Settings?

    Context:
    Premiere CC on a WIndows 7 laptop with an external DreamColor monitor connected via VGA port (for convenience rather than bit depth).
    What color space is appropriate in the DreamColor settings, i.e. what is the VGA likely to be supplying?   DreamColor's config options are: [ Full | AdobeRGB | Rec.601 | sRGB | Rec.709 | DCI P3 Emulation ].  I'm guessing sRGB, but is that reasonable e.g. is it the Adobe kind?

    Several questions spring to mind ... first, are you calibrating this with an actual "real" calibration tool, such as the i1Display units, anything? Because ... if the answer is no ... well, the output isn't set to any particular "there" before you even start, is it?
    Next ... what are you going to be outputting for? B-cast TV? Critical web use? Your own YouTube/Vimeo channel for the heck of it? Family records? Whatever is going to be the "heaviest" output (meaning demands on color space) sets the minimum from what your choices can offer. Critical web work or such, you would either want the Adobe RGB or the Rec.709 I would think. For just fun stuff, the sRGB would work ok.
    Fwiw ... Adobe RGB is a wider color space than "standard" sRGB. Rec.601 & Rec.709 are "broadcast" standards that include specialized base/gain/gamma settings. Rec.709 is the newer and far more common one of the two ... and it sets "black" as at value (in 8-bit terms) of 16 and "white" at 235. Data outside those values are used for technical purposes within the "system". Some modern video cams record in Rec.709, btw.

  • User exit to change vendor e-mail address used for PO output via e-mail...

    We have two vendor e-mail addresses for a particular vendor. Ignoring output determination, it looks like I will need to control which of the two e-mail vendor addresses is used when the PO is output via e-mail.
    The default is the first one e-mail address, but for PO's I would like to force the second vendor e-mail address.
    There are tonnes of exits available for PO output by the looks of it so I am trying to discover which is relevant for what I am trying to achieve.
    Jas
    Edited by: Jason Stratham on Apr 30, 2009 5:53 PM

    Thanks Martin,
    I guess that's the same path that I took earlier when using SPRO and looking at the Purchasing->Messages. In my case it's ZMEDRUCK, but that does not help me in regards to controlling the vendors e-mail address being used. When sending the PO as an e-mail it uses (by default) the first e-mail address of the Vendor, whereas the vendor could have multiple ones. In my test case my vendor has two addresses but it always defaults to using the first. I know that I need to modify this behaviour somehow, but how I have no idea as I can find no Exit routine.
    Jas

  • I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

    I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

    Hall Palm Desert,
    if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

  • Outputting via SDI to DigiBeta thru Blackmagic Decklink Extreme

    I'm running Final Cut Pro 5.1.2 on MacOS 10.4.8. I've edited a 23.98FPS - DVCPro50 sequence. I can preview using the Decklink Extreme card fine. I can output via compenent out to a regular beta deck (UVW-1800) just fine, which is also the deck I use for monitoring while I am editing. I plug the SDI output from the decklink card into our digibeta deck (DVW-A500). I also send the audio over SDI. I see both the audio and video in my digibeta deck. If I just PLAY the sequence out, the digibeta sees and hears it fine. No problems.
    This is my problem. Whenever I try to 'edit to tape' it usually starts out fine... then I get A LOT of digital drop outs / squares / digital distortion on the digibeta. They come up randomly and it also digitally distorts the audio when you play the tape back.
    The digibeta deck is fine, as we use it to output via our Avid Media Composers every day...no dropouts or problems. It has to be with FCP / DeckLink Card when you try an 'edit to tape'. I've also tried a 'print to video' with the same results. Have you guys heard of this problem at all? Hopefully you have a fix for me...
    thanks.

    Awesome - the Out Ref fix did it!
    When I did the edit to tape I tried both insert editing and assemble editing - both ended up the same.
    On a side discussion - how do you sync the FCP machine with the black burst generator? I'm still a bit new to this - what exactly does the genlock do on the Decklink Extreme card? Is this where I sync with the black burst?
    I assume the digibeta deck will also get synced with the same black burst generator. Does this go into the reference input on the back?
    Thanks for your help,
    -Grant

  • Help with sound output via HDMI

    My sound output via HDMI suddenly stopped worked to my TV set. I've reset the PRAM and the SMC. When I go to sound control panel for sound output, the setting is on Headphones. When I try to change it to SV420XVT1A (the tv) it immediately jumps back to headphone. I also tried a different HDMI cable to a different HDMI port on the tv. This just started after the Mac Mini had been turned off for a week. I'm using Lion and it's an 8GB Intel Core 2 Duo. Any suggestions?

    I actually discovered this answer about 5 minutes after I posted the question. Thanks a lot for your help!! Funny thing is that it had worked all along with something plugged in the headphone jack but suddenly stopped working. Again, thanks!

  • Connection Help via VGA without apple's VGA adapter

    Hi, I just bought a brand new mini online today. I deglected to purchase a mini-dvi to vga adapter thinking i do not need it with my current setup.
    --Windows pc with a dual DVI out graphics card(1 dvi-vga adapter connected to a vga cable--->to the monitor)
    Can i simply take that DVI-VGA adapter off my pc and throw it on apple's DVI.. plug my monitor cable into that and get video? OR... do i need to run to microcenter when i get my mac just for a 30$ adapter to VGA?
    I planned on getting a TV within the next month or two using a DVI-HDMI cable anyway.. so i was trying to make due with what i already had.
    Thanks in advance,
    -Joe

    I understand that the mini comes with a mini-DVI adapter, and that would be put to use connecting it to a DVI-VGA adapter that comes with most graphics cards now-a-days. which then would essentially a VGA out port for the mac mini.... in turn being able to connect it to my monitor via VGA cable... correct?
    Here is an example of what im talking about: http://img.tomshardware.com/us/2005/11/23/pcinterfaces_101/vgadvi1.jpg
    If i connect that to the included mini-DVI to DVI adapter that comes with the mini TO that adapter in the picture TO a basic VGA cable.. technically it should work?
    A bit hillbilly rigged but its better than wasting 30$ on a brand new cable i'd never use again after like two weeks.
    I've got a day or two before the mac actually comes so I'm just trying to head off any problems ahead of time.
    Message was edited by: chimpezman

  • Sending report output via E-mail (excel pivoted format)

    Hi all,
    i have a written a report where i need to send the report output to somebody via
    E-mail.i am sending this report output via E-mail successfully.The receiver receives, my output in excel format.but this excel is not <b>pivoted</b>.
    i want , the receiver should get my output in pivoted excel format.i.e my output data should be exactly fit in the excel sheet.
    now the columns in excel sheet are overlapping.once i double clicked, the columns are getting separated.i do not want to double click.i want all the columns should come properly i.e excel field  length should be adjusted as per the output field length.
    i am giving my coding below.plz suggest how i can do the above thing .it's urgent.
    any idea will be highly appreaciated.
    Regards
    if not p_email1 is initial.
         perform fill_report_csv.
         perform f_send_internet_mail.
      endif.
    FORM fill_report_csv.
       data :   l_text(232) type c,
               v_matnr1(21) type c,
               v_matnr(21) type c,
               v_matkl(14) type c,
               v_maktx(45) type c,
               v_ttlstk(14) type c,
               v_verpr(14) type c,
               v_werks(14) type c,
               v_lgort(14) type c,
               v_char(10) type c,
               v_stks type p ,
               v_po(40) type c,
               v_qty(13) type c,
                v_qty1 type sy-datum,
               v_date(15) type c,
               v_date1(15) TYPE C,
               v_name(35) type c,
               v_eknam(18) type c,
               v_lifnr(15) type c,
            l_po(40) type c,
            v_matnr(20) type c,
             l_rate(11) type  p decimals 5,
             l_flag type c.
      concatenate c_equal c_colon 'PO no.' c_colon
                    into v_po.
      concatenate c_equal c_colon 'Material no.' c_colon
                    into v_matnr.
      concatenate c_equal c_colon 'Description.' c_colon
                    into v_maktx.
      concatenate c_equal c_colon 'Due Qty.' c_colon
                    into v_qty.
      concatenate c_equal c_colon 'Del Date.' c_colon
                    into v_date.
      concatenate c_equal c_colon 'Vendor.' c_colon
                    into v_name.
      concatenate c_equal c_colon 'Buyer.' c_colon
                    into v_eknam.
      concatenate c_equal c_colon 'Vendor Code.' c_colon
                    into v_lifnr.
    concatenate
             v_po v_matnr v_maktx v_qty
             v_date v_name v_eknam v_lifnr
             into i_download
             SEPARATED BY con_tab.
      append i_download .
    clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
    clear wa_output.
    loop at i_output into wa_output.
       on change of wa_output-ebeln.
         clear v_lines.
         loop at i_eket into wa_eket
                 where ebeln = wa_output-ebeln.
           v_lines = v_lines + 1.
           clear wa_eket.
         endloop.
    **-- Checking of page break
         v_lines = sy-linno + v_lines .
         if 55 < v_lines  .
           write:/0(161) sy-uline.
           new-page.
         endif.
      clear v_lines.
          loop at i_eket into wa_eket
                  where ebeln = wa_output-ebeln.
            v_lines = v_lines + 1.
            clear wa_eket.
          endloop.
    *-- Calculating the due qty.
        wa_output-dumng = wa_output-menge - wa_output-wemng.
    *-- Writing the Line items of the PO.
        read table i_ekpo into wa_ekpo
              with key ebeln = wa_output-ebeln
                       ebelp = wa_output-ebelp.
         l_rate = wa_ekpo-netpr / wa_ekpo-peinh.
    *-- Writing of PO detail
         if wa_output-dumng gt 0 .
         v_qty = wa_output-dumng.
        v_date1 = wa_output-eindt.
        v_maktx = wa_output-maktx.
         if wa_output-maktx+0(1) = '"' .
                concatenate  c_equal wa_output-maktx
                   into v_maktx  .
             else .
                concatenate  c_equal c_colon wa_output-maktx c_colon
                   into v_maktx  .
             endif .
       if wa_output-name1+0(1) = '"' .
                concatenate  c_equal wa_output-name1
                   into v_name  .
             else .
                concatenate  c_equal c_colon wa_output-name1 c_colon
                   into v_name  .
             endif .
        v_name = wa_output-name1.
        v_lifnr = wa_output-lifnr.
         write wa_output-eindt to v_date1 DD/MM/YYYY.
         concatenate '="' wa_output-ebeln '/'
                wa_output-ebelp '"' into v_po .
         concatenate '="' wa_output-matnr '"' into v_matnr .
             concatenate  c_equal c_colon wa_output-maktx c_colon
               into v_maktx  .
              concatenate  c_equal c_colon wa_output-dumng c_colon
               into v_qty1  .
               concatenate  c_equal c_colon wa_output-eindt c_colon
               into v_date1  .
              concatenate  c_equal c_colon wa_output-name1 c_colon
               into v_name  .
                concatenate  c_equal c_colon wa_output-eknam c_colon
                into v_eknam  .
              concatenate  c_equal c_colon wa_output-lifnr c_colon
               into v_lifnr  .
              concatenate  c_equal c_colon wa_mard-werks '/'
               wa_mard-lgort c_colon
               into v_lgort .
                 concatenate '="' wa_output-lifnr '"' into v_lifnr .
    condense:v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
         concatenate
             v_po v_matnr v_maktx v_qty
             v_date1 v_name v_eknam v_lifnr
             into i_download
             SEPARATED BY con_tab.
        concatenate con_cret i_download INTO i_download .
        append i_download .
      endif.
    clear : v_po,v_matnr, v_maktx, v_qty, v_date, v_name, v_eknam,v_lifnr .
    endloop.
    ENDFORM.                    " fill_report_csv
    *&      Form  f_send_internet_mail
          text
    -->  p1        text
    <--  p2        text
    FORM f_send_internet_mail.
    Variables
    data:   it_packing_list like sopcklsti1 occurs 0 with header line,
            it_contents like solisti1 occurs 0 with header line,
            it_receivers like somlreci1 occurs 0 with header line,
            it_attachment like solisti1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    data:   it_message type standard table of SOLISTI1 initial size 0
                    with header line.
    data : found_receiver type c,
           v_title(80) type c,
           l_text(180) type c.
    Fill the document data.
      gd_doc_data-doc_size = 1.
    Adds text to email text table
      append 'Pls see attached open purchase order report.' to it_message.
      append '' to it_message.
      concatenate 'Note: This is system generated report'
                  ', figures may subject to actual physical count.'
                  into l_text separated by space.
      append l_text to it_message.
    Populate the subject/generic message attributes
      CLEAR gd_doc_data.
      READ TABLE i_download INDEX w_cnt.
      gd_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( i_download ).
      gd_doc_data-obj_langu  = sy-langu.
      gd_doc_data-obj_name   = 'SAPRPT'.
    if p_asdate is initial .
         concatenate p_title ' '
                  sy-datum sy-uzeit into v_title separated by space.
    else .
        concatenate p_title ' '
                 p_bldat p_cputm into v_title separated by space.
    endif .
      gd_doc_data-obj_descr  = v_title .
      gd_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = i_download[].
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table it_message lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
    Create attachment notification
      it_packing_list-transf_bin = 'X'.
      it_packing_list-head_start = 1.
      it_packing_list-head_num   = 1.
      it_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES it_packing_list-body_num.
      it_packing_list-doc_type   =  'XLS'.
      it_packing_list-obj_descr  =  'OPEN PURCHASE ORDER' .
      it_packing_list-obj_name   =  'PO.XLS' .
      it_packing_list-doc_size   =  it_packing_list-body_num * 255.
      APPEND it_packing_list.
    assign SAP user smtp address from successful retrieval.
      loop at p_email.
    Add the recipients email address
         found_receiver = 'X' .
         it_receivers-receiver = p_email-low.
         it_receivers-rec_type = 'U'.
         it_receivers-com_type = 'INT'.
         it_receivers-notif_del = ''.
         it_receivers-notif_ndel = 'X'.
         append it_receivers .
      endloop .
    Add default recipient email when unable to locate purc group email
       if found_receiver is initial .
           it_receivers-receiver = p_email.
           it_receivers-rec_type = 'U'.
           it_receivers-com_type = 'INT'.
           it_receivers-notif_del = ''.
           it_receivers-notif_ndel = 'X'.
          append it_receivers.
       endif .
    Call the FM to post the message to SAPMAIL
      call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
                commit_work                = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    Store function module return code
      gd_error = sy-subrc.
    Get it_receivers return code
      loop at it_receivers.
      endloop.
    Instructs mail send program for SAPCONNECT to send email.
      wait up to 2 seconds.
      if gd_error eq 0.
          submit rsconn01 with mode = 'INT'
                        with output = ' '
                        and return.
      endif.
    ENDFORM.                    " f_send_internet_mail

    Hi,
    go through this link,
    http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm
    you have some sample programs.
    Regards,
    Raghavendra

Maybe you are looking for