Forcing status to Blocked

Hi Gurus,
I have got following issue in Inquiry
We do credit check in inquiry, When credit is not Okey we dont apply credit block we will just give a warning message. This happens based on my inquiry Configuration. Now i want to force that header "Overall Blocked status" to "Blocked" when i get one particular value from Portal.
Can i force the "overall blocked status" and change the value?
My actual requirement is when i get some value from portal i should not be able to create quotation
Thank you
ANil

Hi Prasanth,
Thanks for your response.
Is there any other status that i can change to blocked or rejected so that i can block creating quotation.
No line items exist in Inquiry. Only Header info.
Thank you
ANil

Similar Messages

Can't accept BBM invitations and Invites sent show as "Pending for Authorization" but recipients are not receiving them either (PIN Message Status : Service Blocked)

I recenly changed device from BB Curve 8530 to BB Bold 9900 and ever since then can't accept BBM invitations and Invites sent shows only as "Pending for Authorization" but recipients are not receiving them either. Tried sending PIN messages but I got a red x next to the message and the status says: "Service Blocked" .
When my phone got lost, I was lucky that I just synchronized my device to my BB Desktop. Not only was I able to retrieve my contacts (phonebooks and BBM) but also ALL txt msgs and even call logs
Anway, that happening, I assumed I don't need to re-send all my BBM friends invites since some were able to communicate with me. But for those who have deleted my profile (knowing it got lost) and were still on my contact were the ones affected. I tried deleting them and sent an invite only to find out that: I can't accept BBM invitations and Invites sent shows as "Pending for Authorization" but recipients are not receiving any. (they also have the same pending for authorization notice on their end)
When I tried to send them a PIN message I get a red x next to the message nd get the service blocked message.
Help I do not know what else to do.
** FYI: new contacts added with my new PIN have no prob sending invites and me accepting them all.

Hello Lhea,
This issue is most likely Caused by the BlackBerry not being provisioned for BlackBerry Data Services.
Please have a look at the following article that covers "Service Blocked" when sending a PIN message:
http://btsc.webapps.blackberry.com/btsc/KB19244
I hope this helps.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Milestone billing is possible eventhough billing status is blocked.

Hi,
The scenario is like: I create a sales order for a configurable material which requires to create sales order BOM. Now when I save the sales order, delivery block status and billing block status are shown as 'blocked'. Its obvious as I haven't yet created sales order BOM and run the costing for the same.
But still I am able to do the milestone billing after removing billing block from the billing plan.
Is it the standard SAP functionality or defect in the system?

Hi
it is standard SAP functionality, based on the sales document type it will happen.
cheers

Delivery block status is Blocked

Hi all,
In a standard order(VA02), initially for item 10, we enter a material and then save it.
Then the same item 10 is changed into a different material.
However, the delivery block status in Item 10 for the first material is still 'Blocked', whereas for the newly entered material the delivery block status says 'Not Blocked'.
Please let me know the reason for this.
Thanks and regards,
Anishur

This is not standard (if i recall). This might have developed in one of your sales user exits. Check out all of your user exits in program SAPMV45A..... Specially in source determination and save document prepare user exits (may be in include MV45AFZB and MV45AFZZ)

USER STATUS BILLING BLOCKED

Good morning,
I am replicating a sales order frm CRM to ECC.
I have created a status profile (transaction CRMBS02). I have two status: accepted and cancelled.
When the status is cancelled I would like to block the billing, so the replicated sales order can't be billed. Do you know if i can add any transaction to block the billing??
I have seen the transaction CANC to add in the user status but it consists in delete the item, (so the price in ECC is 0).
Thank you very much
P.D I give points to the answers

Hi Robert,
I am also trying to replicate the user status from CRM to ECC.
As you said '
implement logic in method CRM_DATAEXCH_AFTER_BAPI_FILL of badi CRM_DATAEXCHG_BADI. Status is writen in IT_BUS_TRANS_MSG-STATUS_H. You must then fill appropriate structure for ERP side.'
Could you tell me which one would be the appropriate structure on ERP side. I dont find one in teh badi CRM_DATAEXCH_AFTER_BAPI_FILL
Thanks,
Oindrila

In Sales Order Overall Status is Blocked

Hi Gurus,
I got an issue with Sales Order. Here delivery is complete and billing is complete. In document flow it is showing it is complete.
If you check overall status of the order it is showing as blocked.
What could be the reason.
Thanks.
Regards,
Varada

Check the copy control routines which you are using between your sales document to delivery to billing.
Maybe the routine is not taking into account the blocks. You need to ensure that the logic is written by abaper to take billing/delivery blocks in account before subsequent processing.
Thanks

Gray out print button if status is blocked

Hello Experts,
I'm new to module pool programming.
I have one application developed by implementers, In that we need to gray out the print button when the status of the LC is blocked.How can i achive it.
Suggestions plz...
Thanks in advance.
Indra

Hi,
In the PBO of the screen in the status module write this
DATA FCODE TYPE TABLE OF SY-UCOMM.
if LC . -
wat ever ur condition
APPEND 'PRINT' TO FCODE.
endif
SET PF-STATUS '9013' EXCLUDING FCODE.
this will exclude the button wen ur condition will satisfy

Sales order status (credit blocked) using APO tables

Hello All,
I need to check if a sales order has a credit blocked status using APO tables.
Which table and field can I use for this issue?
Thank you in advance.
Bests regards.
Januario Faria

When using the API, are you trying to create the order as booked using the booked flag or the book action? I would recommend using the action if you are not. To troubleshoot, I would try the API without booking and then use the following article to determine the issue:
Unable To Setup A Credit Card Bank Account For The Customer. CC Information On The Order Is Not Valid (Doc ID 1450936.1)

Add " define blocking reasons" under "status mangement" block in CRM

Hello experts,
I would like to add "define blocking reasons under the "status management" in the "status" tab in BP (Business Partner) transaction in CRM. So far the only option is status profile.
If it is clear can someone help me find it?
Thank you!!

Hi Scaper.
if you want to block a BP for using in transaction, then use 'Transaction Block Reason' of 'Overall Block'.
if you want to block a BP centrally, throughout the CRM, then use 'Central Block' checkbox.
i hope i have answered your question, if you need more information, please get back to me.
Are you talking about blocking a BP in a single transaction?.. that means is this BP allowed to use in single transaction, if this is the case, i dont think Standard CRM supports it. But you can block a BP in all the transactions.
Regards,
Krishna

Payment Card Order completely invoiced but in the order is still showing Overall Status as Blocked

Payment Card Order completely invoiced but in the order is still showing Overall Status as Blocked

Share the screen shot of payment card tab from that sale order. Also what values are flowing in Status tab.
G. Lakshmipathi

Change title according status of block

I would like to keep user informed what's going on, and like to change title of window according to status of window, something like in pcode under:
If status = new or then title = "New"
elsIf Status = query then title = "Query"
else
title = "Id From record"
end if;
What triggers I have to write to get those actions done... Currently I have when-new-record-instance and key-entqry but latter doesn't seem to work well (It doesn't change title)...

There should be no particular triggers that you have to use. SET_WINDOW_PROPERTY is not a restricted built-in.
The logical place to put this code would be in the Key triggers for Enter Query execute Query and Exit as these are the paces the status would change.

Additional Conditions in Status of blocked conditions

Hi Experts,
I have to show two more conditions in the staus tab of the blocked document for transaction /SAPSLL/BL_DOCS_EXP. I want to know if it is possible because I was not able to find any userexit for this so how to do this?
Thanks
Manish

Hi,
We solved the problem by setting two additional conditions in GTS. And for this, we set up two additional partner functions in ECC and sent those partner functions in GTS. On certain conditions,we sent certain partner numbers in GTS and checked those partner functions in GTS through configuration.
Regards,
Manish

My safari is blocked if I force quit same blocked pages keep coming up

Please help my safari is blocked with most things greyed out . I have a pop up window from macibr -flavour.com wanting to update my video player . I have tried quit but same pages keep reappearing.

Hi Anne,
Try following the suggestions in this thread.
Hope it helps,
H

Listener has status of blocked on a database

The database is open. I can connect through secure shell on the server and run queries. I cannot connect remotely and when I do
lsnrctl services it says my database is blocked.
how do i diagnose this?

Try restarting your listener and the database in sequence (if possible).
If that does not help, setup local_listener to init.ora of that database.

Sales order blocked for credit with status "Payment Terms"

Hi Experts,
Sales order is blocked for credit, as when i refer the t.code vkm3 or vkm1, the status of blocking showing as "Payment Term". Geenrally the status of credit block would be 'Old item', Dynamic check', value etc.
My question here is how the sales order is blocked with status "Payment Terms", and what is the role of payment terms in credit management.
regards
Vivek.

Hi Vivek,
The Standard Cr. management ( Automatic credit check) of SAP has Critical Fields Check - payment terms is one of them,
If it is being changed in sales order (other than maintained in Customer master) the sales order will go for credit block
Thanks
Dilip S

Forcing status to Blocked

Similar Messages

Maybe you are looking for