Ford Sync and my Iphone4s are having issues. When I receive a call, it goes into privacy mode. I have searched ford's site. But still no answers. Any suggestions?

Ford Sync and my iphone4s are having one major issue. When I receive a call, it goes into privacy mode. I have been on Ford's web site and no one knows the answer. It is just when I receive calls. What to do? I have used a Blackberry Storm 2 in this same vehicle and no problems.

Thanks for the quick resonse Kilted Tim. Are you from Scotland? My wife is.
I decided to try to do two things this morning to resolve this privacy problem. The first is, I restored my wife;s phone from itunes--in spite of the fact that the Apple tech at the Genius Bar in Tampa said that reloading the firmware is not the problem and it must be Ford. This took about 15 minutes to download, restore and verify. One must resist the temptation to disconnect the phone because I had a popup by the system tray ( I'm using Win7) that said I can now use the phone but itunes was still doing stuff so I just let it do it's thing until it (itunes) told me to use the phone. Went down to the car and my privacy issue is resolved.
I also went to syncmyride to download the version checker. A word of advice this does not work well if at all on google Chrome. I went to Explorer and it worked fine. I was on a chat line about a week ago and was told that google Chrome will work with syncmyride.com. So much for their knowledge.

Similar Messages

Delivery Notes and CofAs we are having issues.

Hi , one of our users has the following problem:
==================================
I have recently had a printer put on the network that is compatible with SAP. When we generate CofAs or Delivery Notes from SAP, the printout font is now in courier and the letters/numbers are overlapping in some sections.
We need to have this fixed so the CofAs/DNs are legible.
Also, the DNs should be printing two-sided. They are not now. The printer is capable of printing two-sided.
==================================
Summary:
I printed out a Quality Notification and it prints fine. Only the Delivery Notes and CofAs we are having issues.
what could be the problem?
how could it be fixed?
please let us know.
Regards.

          I tried this option, but did not help. We have two weblogic servers on different
          machines. One works fine in downloading pdf file over https, but not the other.
          The error we are getting after selecting it to save it to a file:
          IE cannot download xx.pdf from www.xxx.com
          From the link, when we say "save target as", we get different error as:
          This file could not be written to cache.
          Someone suggested to pass "pragma: public" or "pragama: no-cache" in the header.
          But we are just simply serving it as a file, neither from servlet nor from jsp.
          So I suspect it something to do with our weblogic proxy or security configuration.
          Any ideas/help is much appreciated.
          Thanks
          Jayashree Raghavan <[email protected]> wrote:
          >If you ever have a similar problem it might help to check in browser
          >settings.
          >In IE goto tools/internet options/
          >Goto advanced Tab
          >go down to Security.
          >Uncheck the "donot save encrypted pages to disk".
          >This will make downloading a pdf work in ssl.
          >
          >
          >Jayashree Raghavan wrote:
          >
          >> We resolved this problem thanks to Maxim, by commenting out the code
          >that sends to the browser not to cache these pdf files. response.setHeader("Pragma",
          >"no-cache");
          >

Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?

Okay so about four days ago my ipad says it has apps to update but whenever i go to the update apps page it will not load and i have tried rebooting signing out but nothing will work, any suggestions?

If you are getting the blank app update screen, many, many people are having this problem over the last couple of days. It is a problem that Apple must fix now.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

HT201269 Was downloading new software os 6.1.3 and the iPad seems to have frozen. Have tried the off button but nothing happens. Any suggestions?

Was downloading the os 6.1.3 software and the iPad seems to have frozen. Have tried the off button but nothing happens. Doesn't indicate that the power is on.

Then try this now.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

TS1286 Hi, I am trying to restore my i-phone 4 and keep getting error messages 2001 & 2006. have tried to follow directions but no success. Any suggestions??

Hi. I am trying to restore my iphone 4. Keep receiving error codes 2001 7 2006. Have followed instruction on web, No success. Any help ouy there??

It may be related to conflicting security software.
If the errors persist on another computer and known-good USB cable, the device may need service.

Having issue when we try to print more than 300 container labels

Hi Gurus,
We are having issue when we try to print more than 300 container labels. Once it reaches 300 it starts to jump the sequence and we are not able to complete all the tickets if itu2019s more than 300.
Regards
Rajib Pathak

dear friend,
first, i recommend to analyse the spool request and discuss it with your basis/technical guys (use SP01)
second,
you would try to run t-code SPAD for your output device and check out the checkbox "Process requests sequentially" (ON)
regards,

TS1630 My iphone4 speakers will only work when I receive a call or factime, but for nothing else. Why?

My Speakers on my iphone4 will only work when I receive a call or facetime, and are muffled when an alarm goes off. Other than that, I have absolutely no sound from anything- text, music, videos, games, etc. UNLESS I use headphone. My phone will vibrate with text messages, though. When I try to turn up the volume on the side, it doesn't register any bars- the space for the volume boxes is blank. Also, there is no volume bar in my music when I try to turn up the volume. I have tried restarting my phone numerous times, I have also checked and rechecked the switch on the side to no avail. Does anyone have any troubleshooting ideas or know what might cause this?

I tried this and noticed a little green inside the charging port. I panicked thinking it was corrupt, but found out if you lighting moisten the toothbrush with alcohol and gently scrub (with the power off) you can remove the green. I started inspecting one of our charging adapters, which had been giving us trouble, and it was very green inside. Not sure if it can transfer from one to the other?
BUT now I have sound! Thanks for your suggestion, it helped!

Downloading app seems to have crashed ,now have striped screen and wont turn off, tried the 2 button10sec trick but still nothing dturn off, tried the 2 button 10secill not turn off tried the 10sec two button trick still not working any suggestions please

while downloading apps seems to have crashed ,now have striped screen and wont turn off, treid the 2 button 10sec trick but still not responding any suggestions please ?

Try here:
iOS: Not responding or does not turn on
If not successful, let the battery fully drain. Then charge for an hour and try again.

My C310 when powering up goes into "initializing" mode, per the printer screen, and stays that way

I have a Photosmart Prem C310. When I power it up, it goes into "initializing" mode on its screen, and stays there, with the little light beam circling the HP logo forever. It never gets to the menu screen. I can only power down by pulling power cord. I reinsert power cord and it repeats the above symptom. Any ideas, before I just junk it??
Thanks!!

Do you have it plugged directly into a wall outlet? If not, take it off of the surge protector and plug it directly into the wall outlet to ensure that it is getting enough power. Even if the prior set up is how the printer has always been connected; it can develop a problem over time by not being plugged directly into a wall outlet.
The next step to take is to make sure that the light on the module is lit. I would then reset the external power module:
Follow these steps to reset an external power module.
Disconnect the power cord from the rear of the printer.
Unplug the power cord from the electrical outlet, power strip, or surge protector.
If the printer uses a power module with a detachable power cord, disconnect the cord from the power module.
Wait 15 seconds.
If the printer uses a power module with a detachable power cord, reconnect the power cord to the power module.
Reconnect the power cord to the rear of the printer.
Plug the power cord back into the electrical outlet. Do not use a power strip or surge protector.
Check to see if the power module on the power cord has an indicator light.
If the power module does not have an indicator light, continue to the next step.
If the power module has an indicator light, make sure that the light is on.
If the indicator light is off , contact HP to replace the power module.
If the indicator light is on, try to power printer back on using power button. I hope that this helps.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

I had to do a complete system restore on my computer and now I am having issues getting all my music back. It's telling me that my account is in use with a different user but I'm the only user on my computer. When I go to sync it, it wants to delete all.

I had to do a complete system restore on my computer and now I am having issues getting all my music back. It's telling me that my account is in use with a different user but I'm the only user on my computer. When I go to sync it, it wants to delete all my music and ringtones. What should I do? I don't want to loose all my items.

When in recovery mode you can't backup the iPod.
You will have to restore via iTunes. See:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?

There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
4. Reset the System Management Controller.
5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested.

MPS 200 with J 4.6. We are having issues with encryption and unable to install latest, J 4.7.2

We have an MPS 200 with J 4.6. We are having issues with encryption and the tech assigned to our TAC case informed us that version J 4.7.2 would resolve the issue per release notes (confirmed). Unfortunately we have been unable to install latest, J 4.7.2. Every time we select the 4000j472.tar.gz file, the MPS displays software upgrade failed. We have used IE 8, 9 and 11 and have opened them up as much as possible, still no joy. We have unzipped the file, but do not know which file to select for the install.
Would appreciate any assist.

As the others have suggested - download the file again - and check that the MD5 Checksum (with something like WinMD5) of what you have downloaded matches what it should be (for J4.7.2 is b328946e6ca24f181c937d90d8e5cc12). Then upload the .tar.gz file as downloaded (wihtout extracting it).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Users are having issues w/ the community page for pa.

It seems other users are having issues with accessing the community page for pa, as noted on
URL: http://www.dslreports.com/forum/r22862991-Any-else-out-there-having-issues-w-the-community-page-4-pa
Title/Location: DSLR (dslreports.com) Forums -> US Telco Support -> Verizon -> Verizon Fiber Optics -> Any else out there having issues w/ the community page 4 pa?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

This is what I told at the online chat..
Richardo: if some people can get to both URLs and others can only get to the new one that could be that the old one is being done away with or if not that then it would have to be the setting for those computers that are not getting to the old one.
Me: Like what kind of settings?
Me: I have, as you may know, A Static Public IP (IP, Subnet Mask, Default Gateway, and DNS Servers) as assigned by Verizon.
Richardo: that would be the settings within the browser.
Me: like cache, or proxy server for example... ?
Me: connection setting
Me: You do not need to tell me where these settings are, just what type of browser settings...
Me: Please, and thanks.
Richardo: the security , cookies, temporary internet files
[EDIT] My appolgies for Cross posting.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

Hi people, have on the phone till Apple, the reason i cant download OS X Lion is because BT are having issues with the large download & are working on a fix. Was told to phone back in 24 hours if problem continues

Hi, just got off the phone from BT Business. It is the Business 2wire hub that has the issue. The girl from technical talked through a direct modem to Mac connection and my download took 20 minutes. If you are on Fibre broadband this is the only current fix or a new router if non fibre customer. Hope that helps.

If you are having issues installing the new Win 7 PCI/PCIe driver.

If you have a problem with updating to the new Win 7 driver, you may need to do a virgin re-install.
Uninstall PatchMix and the drivers from the uninstaller, or from add/remove programs.
Power down and remove the PCI card.
Boot up and let windows do it's own clean up.
Power down and re-insert the PCI card.
Cancel windows hardware wizard if it pops up, (and it should), then install the most recent PatchMix and beta driver updates.
You may need to load a new factory template in PatchMix, and then rebuild any custom session templates you had.

Now, do you have to disconnect your printer everytime that you want to use it? If so, this is just a temporary fix and that's not something that you should have to do with regularity.
It's GLARING, the amount of people who are having issues with this software. Is APPLE listening to its customers? I'm to the point where I'm about to NOT recommend an I-Pod to anyone that asks. If they do, that's what I'm recommending. I'll also steer them to this website so that they can see with their own eyes, the problems that everyone is having.
This is totally ridiculous. I've been trying for THREE weeks to get my POS I-Pod Shuffle to download songs through I-Tunes 7.0. It's clear to me that these designers of this software haven't got a clue.
Sorry for the rant but I've had it with this junk.

Ford Sync and my Iphone4s are having issues. When I receive a call, it goes into privacy mode. I have searched ford's site. But still no answers. Any suggestions?

Similar Messages

Maybe you are looking for