Fore Front TMG proxy not allowing SharePoint Office Web App

Hi Everyone,
We are deploying Share Point server 2013 in a week days. we set all things ready to move for live and suddenly we are facing a problem with fore front TMG proxy server. we completely using this Share Point server for internal usage only and completely not
for external networks.
When we open SharePoint Office Web App in IE/Chrome with out any proxy it was working quiet good. But with proxy settings, we can able to log-in to the page and see the contents of the site, but couldn't able to open/edit the documents.
When we open the same SharePoint Office Web App in Firefox with proxy settings, It was not even able to go to the log-in page. Firefox completely blocking this SharePoint site with proxy setting and working good without proxy settings
we are using both ISA 2006 server and Forefront 2010 in our farm. please find the version details.
Forefront Threat Management Gateway Microsoft Corporation version: 7.0.7734.100 ,
Microsoft ISA Server 2006 Microsoft Corporation version 5.0.5720.164
Please help me on this as soon as possible, what I need to do for ForeFront TMG server & ISA Server to allow open/edit the sharepoint office web app.

Hi Sarath,
I would like to clarify the below as it will help others to provide solutions.
First Point is, What is the TMG Topology, Is it SecureNAT as well as Proxy for all the subnet from where you are trying to access the site.
Is your Site hosted internally Ie internal when looking from ISA, If SP is internal then the traffic should not hit ISA itself, Or is it hosted on DMZ interface of ISA ?
Your SP server IP / Gateway Details
Your Sharepoint URL
If this is different from AD domain name, Do you have a split DNS configured ?
Your TMG IP address.
If you have Proxy as ISA and gateway as other Firewall, check the block on gateway as well.

Similar Messages

PowerPoint presentations not working with Office Web Apps

Hi,
I have deployed Lync 2013 and Office Web Apps Server in order to share PowerPoint presentations. All te sharings are working fine (Desktop, Program, Whiteboard, Poll) but PowerPoint presentations.
I have re-installed Office Web Apps Server several times but it doesn't work:
Discovery URL is OK
Event IDs in Lync Server Event Viewer are OK
I have checked certificate and created it twice and that's not the problem (when tried to use a wrong certificate, the behaviour was different).
Tried aspnet_regiis but didn't worked.
Both Lync Server and Office Web Apps Server are updated.
Servers are Windows Server 2008 R2 SP1.
I have tested both Lync 2013 and Lync 2013 Basic clients but no one works.
When I share a PowerPoint, I can see it follows the whole way through LyncShare, Lync Server and Office Web Apps Server. PowerPoint files get to Office Web Apps Server (different name but I can move then to other workstation and check
they are the files shared).
Clients begin showing a "Loading..." but end showing "Network connectivity lost or server too busy" (after 90 seconds more or less).
If I get URL from Lync-UccApi-0:
https://wacserver.domain/m/Presenter.aspx?a=0&e=true&WopiSrc=https%3A%2F%2Flyncpool.domain%2FDataCollabWeb%2Fwopi%2Ffiles%2F11-1-90C848&access_token=AAMFEECCjUt7489YhSlhQY4GBWcGEIsJ8vG8JQH9w0g_TTTVe3aBEECCjUt7489YhSlhQY4GBWeCApwQgyBHjXVmSaUT70sAAlMNX4oAfTt5Nqgy5sJwqlLneNAxGYYIsFS5edC90AgIDURhdGFDb2xsYWJXZWI&<fs=FULLSCREEN&><rec=RECORDING&><thm=THEME_ID&><ui=UI_LLCC&><rs=DC_LLCC&>
If I put this URL in the browser, it turns black and shows "Loading..." and, after a long while, "PowerPoint Web App...", but it remains in this state (loading) without working.
In the Office Web Apps Server Event Viewer there are some errors related to other services I'm not using, as OneNote, or for Monitoring with the "PositiveDirect" and "NegativeDirect" tokens. Machine also answers it's
Unhealthy, but as I have read, this is not a problem.
In the ULS Logs I just see errors related to these events but logs for PowerPoint work fine. And IIS is answering with "200" (although there are a number of petitions that seem to be repeated:
2013-12-02 16:23:15 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001395077
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 218
2013-12-02 16:23:15 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001396078
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 203
2013-12-02 16:23:17 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001397093
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 203
2013-12-02 16:23:18 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001398093
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 218
2013-12-02 16:23:19 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001399078
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 328
2013-12-02 16:23:20 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001400076
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 234
2013-12-02 16:23:20 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001401076
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 203
It seems that something is not working between the clients and Office Web Apps Server. There is not a firewall and machines see each other. Certificate is accepted.
I have tried so many thing but none of them worked.
Does anybody have an idea?
Thanks!

Hi Thamara,
There is a HLB but I thought of that and tested both: with HLB and pointing just a Front End, without HLB. In both cases, results were the same.
I can access the Front End pool web services from the WAC server using the IE.
I'm watching now this event:
<?xml version="1.0" encoding="utf-16"?>
<HealthReport xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<HealthMessage>BroadcastServicesWatchdog_Wfe reported status for BroadcastServices_Host in category '3'. Reported status: Contacting Participant.svc failed with an exception: The remote server returned an error: (404) Not Found.</HealthMessage>
</HealthReport>
Reading some posts, it's a known issue fixable by adding HTTP-Activation feature... in Windows 2012. I have a Windows 2008 and .NET Framework 4.5 is installed. I've tried to add HTTP-Activation feature from .NET Framework 3.5, but a number
of format errors appear. I don't know how I could fix it in Windows 2008.
In addition, as I'm making test for share PPT and they aren't finally showed, this error appears also:
<?xml version="1.0" encoding="utf-16"?>
<HealthReport xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<HealthMessage>PowerPointViewingServicesWatchdog_App reported status for PPTConversionService in category '0'. Reported status: AppManager: A request appears to be stuck in the queue. [State: ReadyToWork] [Start Time: 12/03/2013 10:35:07] [CorrelationId:
ec4db345-0e8c-477e-ac0e-71afcb9a8efd] [DocId: https%3A%2F%2FLYNCPOOL.DOMAIN%2FDataCollabWeb%2Fwopi%2Ffiles%2F1-1-2BCF63F] [ClusterId: 0] [RequestId: 51e9263e-fc78-46b0-93ca-de48272dd2bc] [Current InProgress Queue Length: 4]</HealthMessage>
</HealthReport>
It seems that PPTs are being queued as they aren't actually showed.
Does this give you any clue?
Thank you very much.
Kind regards.

High availability for Lync 2013 persistent chat server and office web app server

I have 1500 users, need HA in primary data center and DR also. looking for HA and DR solution for persistent chat server and office web app server.
is below correct?
1. 2 persistent chat server in a pool of primary data center and 1 in DR. can this be reduced or any changes?
2. 2 Office web app server in a pool of primary data center and 1 in DR. can this be reduced or any changes?
also do i need HLB for both roles?

1) In Lync Server 2013, there are improvements in both high availability and disaster recovery:
High availability improvements: SQL Server mirroring is used to provide high availability for the Persistent Chat Server content database and Persistent Chat compliance database within a data center (in-site).
Disaster recovery improvements: Persistent Chat Server supports a stretched pool architecture that enables a single Persistent Chat Server pool to be stretched across two sites (that is, a single logical pool in the topology, with servers in the pool physically
located across two sites). SQL Server Log Shipping is used for cross-site disaster recovery.
For more information about high availability and disaster recovery, see
Configuring Persistent Chat Server for High Availability and Disaster Recovery in the Deployment documentation.
2) for HA & DR, you can 2 Office web app server in a pool of primary data center and 1 in DR. and You will need HLB for office web app servers
http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Office Web apps not working

Hi
All of a sudden, the office web apps is not working. I get the below issue
Could not load new WOPI Proof Keys for server XXXXX against Discovery.
Also, i could not see the Office web apps site collection feature. Please suggest.

Please share screenshot of error with ULS log details
All users face same issue?
Check if any application pool on SharePoint server or web app server is stopped?
Try to browse OWA service application. follow below for same:
http://freeit-support.com/2014/09/troubleshoot-sharepoint-service-application-website-issue-from-iis/
Check error in Office web app logs files and event viewer.
If this helped you resolve your issue, please mark it Answered

Office Web Apps Server 2013 / Real-Time co-authoring

Hello,
In general, I would like
to ask the development team or product
manager SharePoint /Office web Apps.
As you already know in the cloud
product version introduces new features. Such as
authoring and other unlike on-premises version . This link demonstrate it.
http://blogs.office.com/2013/11/06/collaboration-just-got-easier-real-time-co-authoring-now-available-in-office-web-apps/ .
Please tell me the plans or roadmaps for the implementation
of these functions in the server version. Or Microsoft
has no plans to develop this area?

great, and as i said, we are working to keep parity, but there are still many features which are technically considered in preview in the O365 environment. after several months, depending on stability, feedback, and whether the feature fits well with
the product, it may either be tested to go into on-prem farms and come out of preview or be dropped altogether (auto-hosted apps).
This feature is definitely one that is key to the future of the product, but there isn't a timeline on when it will come to onprem. there ia a lot of additional testing before anything can be integrated to on-prem as the environments have many
more variables than the rather rigid architecture at O365, as well as the fact that the o365 farms have many of the preview features and so then anything to go into a feature for on-prem needs to be re-vetted in farms without those extras and checked for dependencies
(not normally an issue, but still part of the process).
Christopher Webb | Microsoft Certified Master: SharePoint 2010 | Microsoft Certified Solutions Master: SharePoint Charter | Microsoft Certified Trainer| http://tealsk12.org Volunteer Teacher | http://christophermichaelwebb.com

Office Web Apps 2013 - Excel, fine, Word & Powerpoint, unable to view.

Hi All,
I am having an infuriating issue where by the following occurs when opening documents via OWA:
Excel - Preview, no problem, opening, no problem, editing, no problem (even when accessing oData connections for PWA).
Word - Preview, errors, opening, errors, editing (incredibly!!) works.
PowerPoint - Nothing works...
I think I have read every blog post on every error I am receiving in the ULS but nothing is resolving. It is on a VMware VM and I had to reinstall OWA after it was noted that it has rather surprising behaviour if OWA is not installed on the system drive.
I have installed each hotfix/update and tested after each with no joy...
Three (possibly misleading) error categories:
From OWA log:
Cannot create WOPI Proof Token - could not find valid old proof key;
From SP log:
WOPI Proof: Missing Header;
Useragent not available, file operations may not be optimized (doubt this is causing my problem but the quality of errors in the logs is so bad it may well be).
For context, the service account for OWA is local admin on the box and has full access to the content databases on the SQL server.
The symptoms of the error are the biggest concern given the degrees of success I am having with the different apps (kind of rules out security or setup if Excel works fine and Word sort of works).
Any help will be very much appreciated and may stop my increasing baldness with the amount of hair I am pulling out!!
Thanks in advance.
Sam

Hi Sam,
According to your description, my understanding is that Office Web Apps does not work for viewing Word & PowerPoint.
For troubleshooting your issue, please access the Office Web Apps Server discovery URL to verify that the Office Web Apps Server farm is working for Word & PowerPoint:
http://servername/hosting/discovery
Also please add the OWA url into your “Trusted Sites” in IE.
Reference:
http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_28102553.html
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Opening an embedded document in office web apps

Hi,
I have a test site configured to use office web apps and it works to open documents in OWA. I have a requirement to open a powerpoint presentation embedded in page in office web apps. I used the page viewer web part to do the embedding, but the document
is not opening in office web apps. There is a prompt to open the document in the desktop version of power point. I have checked that the site is configured to open the documents in OWA by default in the site collection features.
Does anybody have a suggestion on how to fix this?
thanks
Sherazad

Hi,
According to your post, my understanding is that you want to embed a PowerPoint document which is opened in office web apps(OWA) in a page.
Here are two solution for your reference:
1.Open the document in OWA, go to File -> Share -> Embed, then copy the Embed Code and add the code into a Content Editor Web Part in the page.
2.Use Page Viewer web part to achieve it, we can get the link from the address bar after the document is opened in OWA. The link like this:
/sites/DennisSite/_layouts/15/WopiFrame.aspx?sourcedoc={D95516CC-6912-4F5B-BF13-C40286BC27A4}&file=Test.pptx&action=default
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

Office web apps Server for Sharepoint 2013

Hello,
I used the following article to install office web apps server and hook it up to a test sharepoint server:
http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx. The OWAS service was verified as working by loading:
https://owas.companyname.com/hosting/discovery
For the sharepoint configuration phase, the following commands were run on the sharepoint machine:
1) New-SPWOPIBinding -ServerName "owas.companyname.com" -- (owas.companyname.com) is the host name of the owas server)
2) Get-SPWOPIZone
3) Set-SPWOPIZone -zone "external-https"
However, office documents are still launching in the desktop office applications, not in the browser. Any ideas of what else I may need to do?
thanks,
Sherazad

Hi ,
According to your description, my understanding is that you fail to configure Office Web Apps for your SharePoint 2013.
How about run Get-SPWOPIZone? If you can get a result, it says that your SharePoint have connected with Office Web Apps.
Then you can run below command to change the zone to internal-https.
Set-SPWOPIZone -zone "internal-https"
Reference:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
http://stevegoodyear.wordpress.com/sharepoint-2013-build-guide/office-web-apps-2013-server-install-and-configuration/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Office Web Apps 2013 - Word app not working on Sharepoint 2013 but Excel does

Hi there!
We had some problems with Office Web Apps 2013 not working with Lync, and the status of OWA was unhealty so we decided to install some updates for OWA.
We have downloaded November 2013 update for OWA.
We found out a guide for putting updates on OWA and done this steps:
* Remove-OfficeWebAppsMachine
* Installed the november update
* Restarted OWA server
* ran: New-OfficeWebAppsFarm -InternalUrl https://owasrv.domain.local -ExternalURL
https://owasrv.domain.local -CertificateName "certname" -AllowHttp -EditingEnabled
* Restart-Service WACSM
- checked in IIS in the bindings if the site useses the correct certificate
Then we went on Sharepoint 2013 and ran some commands:
* Remove-SPWOPIBinding –All:$true
* New-SPWOPIBinding -ServerName owasrv.domain.local
* Set-SPWOPIZone –zone “external-https”
Now here are the funny things:
* Excel word app on Sharepoint 2013 works
* Word APP not working (screenshot)
* Lync 2013 powerpoint still not working (screenshot)
* status of OWA is healthy
bostjanc

Hi,
The Friendly name field must be unique within the Trusted Root Certificate Authorities store. In -CertificateName, enter the friendly name you gave your
certificate earlier.
Validate the configuration by navigating to the discovery URL of the Office Web Apps server. Like
https://xxx/hosting/discovery
Meanwhile, the issue is related to Lync, I recommend to you to post the question on Lync Server for further discussion via the link below.
http://social.technet.microsoft.com/Forums/en-US/home?forum=ocsclients
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction
with us. Thank you for your understanding.
Tracy Cai
TechNet Community Support

Office Web Apps Load Balancing Configuration Issue for SharePoint 2013

I have load balanced servers dedicated for Office Web Apps with name “md1xxxwfe1” and “md1xxxwfe2”
, both this servers are load balanced by CISCO Load balancer. And I have mapped Load Balancer Virutal IP with host name officeapps.jda.corp.local in the DNS records.
Things are working fine if I add new farm by using New-OfficeWebAppsFarm
with server name as internalurl in PowerShell console
as like “ -internalurl http://
md1xxxwfe1 but when I use –internalurl officeapps.jda.corp.local it is not working at all. I’m not getting what to do at this point.
I have gone through following blogs but no luck.
http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
http://blogs.technet.com/b/office_resource_kit/archive/2012/09/11/introducing-office-web-apps-server.aspx
http://davidlimsharepoint.blogspot.in/2013/02/installing-and-configuring-office-web.html
http://sps2013.blogspot.in/2013/09/office-web-apps-with-sharepoint-2013.html
The output of the wfe1 server is attached with this. When I open http:// /hosting/discovery in wfe1 I’m getting following result (attached
screenshot) but it should show hostname rather than server name.
Please help me
Thanks, Ram Ch

Hi Ram ,
For troubleshooting your issue, please take steps as below:
Just about any load balancing solution will work, including a server that runs the Web Server (IIS) role running Application Request Routing (ARR):Install
Application Request Routing
Install the certificate on the load balancer as described under Securing Office Web Apps Server communications by using
HTTPS.
Make sure you have configured the cluster correctly for full internet name:
Reference:
http://technet.microsoft.com/en-us/library/jj219435.aspx#loadbalancer
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Error word web app can not open this document for viewing in office web apps 2010

Hi
i am receiving office web apps error.
i installed sharepoint 2010 on windows server 2012 datacenter,
and installed office web apps 2010 and sp2
adil

Hi Adil,
From the error message, I recommend to check the things below:
Check if Word Viewing service is started in Central Administration. If it is started, stop and re-start it.
Check if the Word Viewing service proxy is created.
Check if the Word Viewing service proxy is associated with web application with issue.
If above cannot work, please check the ULS log for further research.
More reference:
https://amalhashim.wordpress.com/2013/01/29/sharepoint-word-web-app-cannot-open-this-document-for-viewing-because-of-an-unexpected-error/
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Office Web Apps not working externally SharePoint 2013

In the production farm we have connected office web apps server which is FQDN server name ( xxx.xxx.corp.local) , we can open the sites internally without any issues, but when we open from externally office web apps asking for authentication and not working
properly.
Please help me how to make it work in external.
Thanks, Ram Ch

You will need a public facing URL or IP address. Check below
You need to configure your OWA for internet
New-OfficeWebAppsFarm –InternalUrl "md1xxx95.jdaxx.corp.local" -ExternalUrl "http://198.xxx.xxx.xxx" -EditingEnabled
Set-SPWOPIZone –zone
“external-http”
Detailed steps in
http://social.technet.microsoft.com/wiki/contents/articles/19039.sharepoint-2013-how-to-enable-office-web-apps-to-work-in-both-internal-and-external-environments.aspx
Set-SPWOPIZone –zone “external-http”
Set-SPWOPIZone –zone “external-http”
If this helped you resolve your issue, please mark it Answered

High Availibity solution for office web app server 2013 for Sharepoint 2013

I have a scenario with the three nodes SP1 , SP2 and DR-SP with server 2012 standard, each running SharePoint 2013 enterprise, All of three nodes are members of single SharePoint farm that spans two data centers.Primary Data Center have two nodes SP1 , SP2
and DR data center have one node DR-SP of share point 2013.
For Office webapp server i have two nodes OWA1, and DR-OWA with server 2012 standard, that spans between two data centers.Primary Data Center have OWA1 and DR data center have one node DR-OWA of office web app server.
Currently i have configured office web app on primary data center node OWA .How i can enable high availability of office web app server in case of primary data center outage.Please guide.

WAC servers on a single farm must be in the same data center. The WAC configuration you've proposed is unsupported. Build a separate WAC farm in the secondary data center and attach it to the SharePoint farm only in the event of a disaster.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Admin proxy not allowed

I am trying to run proxy authentication using the LDAP C SDK and the functions mentioned in the customization guide for ims 5.2.
My http log file keeps passing the message:
[14/Sep/2004:14:21:53 -0400] machinename httpd[10579]: Account Notice: badlogin: [ipaddress] admin proxy
not allowed
[14/Sep/2004:14:21:53 -0400] machinename httpd[10579]: Account Notice: close [ipaddress] [unauthenticated
] 2004/9/14 14:21:53 0:00:00 104 309 0
does anyone know why?
cheers

alarm.diskavail.msgalarmdescription = "percentage mail partition diskspace available"
alarm.diskavail.msgalarmstatinterval = 3600
alarm.diskavail.msgalarmthreshold = 10
alarm.diskavail.msgalarmthresholddirection = -1
alarm.diskavail.msgalarmwarninginterval = 24
alarm.msgalarmnoticeport = 25
alarm.msgalarmnoticercpt = postmaster
alarm.msgalarmnoticesender = postmaster
alarm.serverresponse.msgalarmdescription = "server response time in seconds"
alarm.serverresponse.msgalarmstatinterval = 600
alarm.serverresponse.msgalarmthreshold = 10
alarm.serverresponse.msgalarmthresholddirection = 1
alarm.serverresponse.msgalarmwarninginterval = 24
encryption.fortezza.nssslactivation = off
encryption.nscertfile = alias/msg-hostdev-cert7.db
encryption.nskeyfile = alias/msg-hostdev-key3.db
encryption.nsssl2 = on
encryption.nsssl3 = on
encryption.nsssl3ciphers = "rsa_null_md5,rsa_fips_3des_sha,rsa_fips_des_sha,rsa_3des_sha,rsa_rc4_128_md5
,rsa_des_sha,tls_rsa_export1024_with_rc4_56_sha,tls_rsa_export1024_with_des_cbc_sha,rsa_rc2_40_md5,rsa_r
c4_40_md5"
encryption.nsssl3sessiontimeout = 0
encryption.nssslclientauth = 0
encryption.nssslsessiontimeout = 0
encryption.rsa.nssslactivation = on
encryption.rsa.nssslpersonalityssl = Server-Cert
encryption.rsa.nsssltoken = "internal (software)"
gen.accounturl = http://%[email protected]:3333/bin/user/admin/bin/enduser
gen.configversion = 4.0
gen.folderurl = http://%[email protected]:3333/bin/user/admin/bin/mailacl.cgi?folder=%M
gen.installedlanguages = en
gen.sitelanguage = en
local.defdomain = emirates.net.ae
local.enduseradmincred = [9E:[2rrP?
local.enduseradmindn = "uid=msg-admin-hostdev.emirates.net.ae-20040831122450, ou=People, o=emirates.net.
ae, o=eim"
local.hostname = hostdev.emirates.net.ae
local.imta.imta_tailor = /app2/iplanet/new/ims5.2/msg-hostdev/imta/config/imta_tailor
local.imta.ssrenabled = yes
local.installeddir = /app2/iplanet/new/ims5.2/bin/msg
local.instancedir = /app2/iplanet/new/ims5.2/msg-hostdev
local.lastconfigfetch = 1095619850
local.ldapbasedn = o=NetscapeRoot
local.ldapcachefile = /app2/iplanet/new/ims5.2/msg-hostdev/config/local.conf
local.ldaphost = hostdev.emirates.net.ae
local.ldapport = 389
local.ldapsiecred = ~G^bHW}2|^
local.ldapsiedn = "cn=msg-hostdev, cn=iPlanet Messaging Suite, cn=Server Group (2), cn=hostdev.emirates.
net.ae, ou=net.ae, o=NetscapeRoot"
local.ldapusessl = False
local.servergid = nsgroup
local.servername = hostdev
local.serverroot = /app2/iplanet/new/ims5.2
local.servertype = msg
local.serveruid = mailsrv
local.service.http.proxy = 1
local.service.http.proxy.port.hostdev.emirates.net.ae = 8888
local.service.pab.attributelist = pabattrs
local.service.pab.enabled = 1
local.service.pab.ldapbasedn = o=pab
local.service.pab.ldapbinddn = "uid=msg-admin-hostdev.emirates.net.ae-20040831122450, ou=People, o=emira
tes.net.ae, o=eim"
local.service.pab.ldaphost = hostdev.emirates.net.ae
local.service.pab.ldappasswd = [9E:[2rrP?
local.service.pab.ldapport = 389
local.service.pab.maxnumberofentries = 500
local.supportedlanguages = "[en,de,fr,es,af,ca,da,nl,fi,gl,ga,is,it,no,pt,sv,ja,ko,zh-CN,zh-TW]"
local.tmpdir = /app2/iplanet/new/ims5.2/msg-hostdev/tmp
local.ugldapbasedn = o=eim
local.ugldapbindcred = [9E:[2rrP?
local.ugldapbinddn = "uid=msg-admin-hostdev.emirates.net.ae-20040831122450, ou=People, o=emirates.net.ae
, o=eim"
local.ugldapdeforgdn = "o=emirates.net.ae, o=eim"
local.ugldaphost = hostdev.emirates.net.ae
local.ugldapport = 389
local.ugldapuselocal = yes
local.webmail.da.host = hostdev.emirates.net.ae
local.webmail.da.port = 8080
local.webmail.sso.enable = 1
local.webmail.sso.singlesignoff = 1
logfile.admin.buffersize = 0
logfile.admin.expirytime = 604800
logfile.admin.flushinterval = 60
logfile.admin.logdir = /app2/iplanet/new/ims5.2/msg-hostdev/log/admin
logfile.admin.loglevel = Notice
logfile.admin.logtype = NscpLog
logfile.admin.maxlogfiles = 10
logfile.admin.maxlogfilesize = 2097152
logfile.admin.maxlogsize = 20971520
logfile.admin.minfreediskspace = 5242880
logfile.admin.rollovertime = 86400
logfile.default.buffersize = 0
logfile.default.expirytime = 604800
logfile.default.flushinterval = 60
logfile.default.logdir = /app2/iplanet/new/ims5.2/msg-hostdev/log/default
logfile.default.loglevel = Notice
logfile.default.logtype = NscpLog
logfile.default.maxlogfiles = 10
logfile.default.maxlogfilesize = 2097152
logfile.default.maxlogsize = 20971520
logfile.default.minfreediskspace = 5242880
logfile.default.rollovertime = 86400
logfile.http.buffersize = 0
logfile.http.expirytime = 604800
logfile.http.flushinterval = 60
logfile.http.logdir = /app2/iplanet/new/ims5.2/msg-hostdev/log/http
logfile.http.loglevel = Notice
logfile.http.logtype = NscpLog
logfile.http.maxlogfiles = 10
logfile.http.maxlogfilesize = 2097152
logfile.http.maxlogsize = 20971520
logfile.http.minfreediskspace = 5242880
logfile.http.rollovertime = 86400
logfile.imap.buffersize = 0
logfile.imap.expirytime = 604800
logfile.imap.flushinterval = 60
logfile.imap.logdir = /app2/iplanet/new/ims5.2/msg-hostdev/log/imap
logfile.imap.loglevel = Notice
logfile.imap.logtype = NscpLog
logfile.imap.maxlogfiles = 10
logfile.imap.maxlogfilesize = 2097152
logfile.imap.maxlogsize = 20971520
logfile.imap.minfreediskspace = 5242880
logfile.imap.rollovertime = 86400
logfile.imta.buffersize = 0
logfile.imta.expirytime = 604800
logfile.imta.flushinterval = 60
logfile.imta.logdir = /app2/iplanet/new/ims5.2/msg-hostdev/log/imta
logfile.imta.loglevel = Notice
logfile.imta.logtype = NscpLog
logfile.imta.maxlogfiles = 10
logfile.imta.maxlogfilesize = 2097152
logfile.imta.maxlogsize = 20971520
logfile.imta.minfreediskspace = 5242880
logfile.imta.rollovertime = 86400
logfile.pop.buffersize = 0
logfile.pop.expirytime = 604800
logfile.pop.flushinterval = 60
logfile.pop.logdir = /app2/iplanet/new/ims5.2/msg-hostdev/log/pop
logfile.pop.loglevel = Notice
logfile.pop.logtype = NscpLog
logfile.pop.maxlogfiles = 10
logfile.pop.maxlogfilesize = 2097152
logfile.pop.maxlogsize = 20971520
logfile.pop.minfreediskspace = 5242880
logfile.pop.rollovertime = 86400
logfiles.admin.alias = |logfile|admin
logfiles.default.alias = |logfile|default
logfiles.http.alias = |logfile|http
logfiles.imap.alias = |logfile|imap
logfiles.imta.alias = |logfile|imta
logfiles.pop.alias = |logfile|pop
nsclassname = "[email protected]@cn=admin-serv-hostdev, cn=Netsca
pe Administration Server, cn=Server Group (2), cn=hostdev.emirates.net.ae, ou=net.ae, o=NetscapeRoot"
nsserversecurity = on
service.authcachesize = 10000
service.authcachettl = 900
service.dcroot = o=internet
service.defaultdomain = emirates.net.ae
service.dnsresolveclient = yes
service.http.allowadminproxy = yes
service.http.allowanonymouslogin = no
service.http.enable = yes
service.http.enablesslport = yes
service.http.extrauserldapattrs = "myuserclass,homepage:w"
service.http.fullfromheader = no
service.http.idletimeout = 3
service.http.ipsecurity = no
service.http.maxmessagesize = 5242880
service.http.maxpostsize = 5242880
service.http.maxsessions = 6000
service.http.maxthreads = 250
service.http.numprocesses = 1
service.http.plaintextmincipher = 0
service.http.port = 80
service.http.proxydomainallowed = hostdev.emirates.net.ae
service.http.resourcetimeout = 900
service.http.sessiontimeout = 7200
service.http.smtpport = 25
service.http.spooldir = /app2/iplanet/new/ims5.2/msg-hostdev/http
service.http.sslcachesize = 0
service.http.sslport = 443
service.http.sslusessl = yes
service.imap.allowanonymouslogin = no
service.imap.banner = "%h %p service (%P %V)"
service.imap.enable = yes
service.imap.enablesslport = yes
service.imap.idletimeout = 30
service.imap.maxsessions = 4000
service.imap.maxthreads = 250
service.imap.numprocesses = 1
service.imap.plaintextmincipher = 0
service.imap.port = 143
service.imap.sslcachesize = 0
service.imap.sslport = 993
service.imap.sslusessl = no
service.ldapmemcache = no
service.ldapmemcachesize = 131072
service.ldapmemcachettl = 30
service.listenaddr = INADDR_ANY
service.loginseparator = @
service.plaintextloginpause = 0
service.pop.allowanonymouslogin = no
service.pop.banner = "%h %p service (%P %V)"
service.pop.enable = yes
service.pop.idletimeout = 10
service.pop.maxsessions = 600
service.pop.maxthreads = 250
service.pop.numprocesses = 1
service.pop.plaintextmincipher = 0
service.pop.popminpoll = 0
service.pop.port = 110
service.pop.sslusessl = no
service.readtimeout = 10
store.admins = admin
store.cleanupage = 1
store.dbcachesize = 16777216
store.defaultacl = "anyone lrs"
store.defaultmailboxquota = -1
store.defaultmessagequota = -1
store.defaultpartition = primary
store.diskflushinterval = 15
store.partition.primary.path = /app2/iplanet/new/ims5.2/msg-hostdev/store/partition/primary
store.quotaenforcement = on
store.quotaexceededmsginterval = 7
store.quotagraceperiod = 120
store.quotanotification = off
store.quotawarn = 90
store.serviceadmingroupdn = "cn=Service Administrators, ou=Groups, o=eim"
store.umask = 077

Office Web App - Use for viewing but not for editing

Hello,
i'm searching for a possibility to use the web app server only for viewing documents but not for editing.
I want to accomplish this for docs and ppts.
So the possibility to edit in Web App should be greyed out or even better, vanish completely.
Best regards
Stephan

You can remove the bindings for OWA for some actions.
https://social.technet.microsoft.com/Forums/sharepoint/en-US/34948782-74cb-452c-af32-af260a7f988a/document-library-new-document-office-web-apps-server?forum=sharepointgeneral

Fore Front TMG proxy not allowing SharePoint Office Web App

Similar Messages

Maybe you are looking for