ForEach Operator in BO 4 SP2

Dears,
The Foreach operator and where statement has an issue with measure
for instance
=Count([Annual Salary] ForEach ([L01 Employee Basic Data Key]) Where ([Annual Salary]>0))
returns 1 in BO4 SP2
wheras works fine in BO3 SP2
the value is around 50k
Thanks for your help,
Regards,
Vijay

If you are in SP02 plain you should try on patch 20 or higher, if the behavior is the same it is important to understand why, could be very likely that the formula needs a more sophisticated context calculation, we should know exactly how the data are behind the scenes, if the measures are related to merged dimensions, etc.
thanks

Similar Messages

Unary operator "~" SQL server 2012 SP2 with cumulative update 2 (build 11.0.5548)

Hello,
I have problem with #ERROR in MDX query when I use Unary operator "~" in the dimension on level, which should not be included in Total/Sub total.
VALUE #Error UnaryOperator( Hierarchy: [Income Statement CER].[Income Statement CER] Level: [Income Statement CER].[Income Statement CER].[Level 03] Attribute: Par SK1) (0, 0) Expression cannot be resolved in the context of an arbitrary shape.
FORMATTED_VALUE #Error UnaryOperator( Hierarchy: [Income Statement CER].[Income Statement CER] Level: [Income Statement CER].[Income Statement CER].[Level 03] Attribute: Par SK1) (0, 0) Expression cannot be resolved in the context of an arbitrary shape.
When I replace unary operator in dimension with "+" everythings works as a charm...
Is it something, what should be corrected in the MDX or this is casued by internal problem in SQL server 2012 SP2 CU2 ?
In excel everything works as it should, member value is excluede from Total/Sub total.
Thank you in advance for advice.
Regards,
Radek

Hello,
I have problem with #ERROR in MDX query when I use Unary operator "~" in the dimension on level, which should not be included in Total/Sub total.
VALUE #Error UnaryOperator( Hierarchy: [Income Statement CER].[Income Statement CER] Level: [Income Statement CER].[Income Statement CER].[Level 03] Attribute: Par SK1) (0, 0) Expression cannot be resolved in the context of an arbitrary shape.
FORMATTED_VALUE #Error UnaryOperator( Hierarchy: [Income Statement CER].[Income Statement CER] Level: [Income Statement CER].[Income Statement CER].[Level 03] Attribute: Par SK1) (0, 0) Expression cannot be resolved in the context of an arbitrary shape.
When I replace unary operator in dimension with "+" everythings works as a charm...
Is it something, what should be corrected in the MDX or this is casued by internal problem in SQL server 2012 SP2 CU2 ?
In excel everything works as it should, member value is excluede from Total/Sub total.
Thank you in advance for advice.
Regards,
Radek

Error message during operations of window XP SP2

After installation of Adobe Flash player 8 and 9 and normal
operations of Windows XP
the following message came on: “Could not find the
macromedia flash”.
How can i solve this problem?

I get the same error message. Does anyone know whats going
on?
Thanks

New Version 4.0 Bluetooth Software (SP2)

Found the following news. As stated it works under SP2 as well. Will owners of the Btoes Dongle be getting this update? Maybie a mod, admin or someone from MSI can answer this.
Quote
Broadcom® Upgrades Market Leading WIDCOMM® Bluetooth® Software With Enhanced Security, CD-Like Wireless Stereo Sound and New Profiles
New Release of Industry's Most Widely Deployed Bluetooth Software Also Features Support for Microsoft® Windows XP®-SP2
IRVINE, Calif., Nov 1, 2004 /PRNewswire-FirstCall via COMTEX/ -- Broadcom Corporation (Nasdaq: BRCM), a leading provider of highly integrated semiconductor solutions enabling broadband communications, today announced WIDCOMM® BTW 4.0, the new release of its popular Bluetooth® software, enhancing security and adding advanced audio/video (A/V) capabilities to the industry's most widely adopted Bluetooth software. The new software was tailored and optimized for seamless integration with Broadcom® single-chip Bluetooth solutions and enhanced with important security upgrades for enterprise and small office customers. It was also tested and qualified for native support and seamless operation with Microsoft's recently announced Service Pack 2 upgrade for the Windows XP® operating system (Windows XP-SP2).
Wireless, high quality stereo audio headsets and speakers enabled by the new WIDCOMM BTW (Bluetooth for Windows) 4.0 software is an exciting new application expected to drive widespread Bluetooth adoption for consumers over the coming years. A/V enhancements built into BTW 4.0 software will bring a new level of audio quality to wireless headsets, enabling a generation of products capable of delivering CD-like stereo sound without the need for wires. The same A/V Bluetooth profile support can be expected to appear in upcoming consumer electronics products like MP3 players, cellular phones, PDAs, and other appliances.
"BTW 4.0 answers two distinct needs in the Bluetooth space: enhanced security, and the ability to effectively stream high-quality audio to wireless headphones or speakers. It is changing the dynamics of how consumers will experience multimedia content on their PCs," said Ron Wong, Senior Product Line Manager for Broadcom's Bluetooth software products. "Broadcom's unique ability to design and deliver all the critical technology pieces for next-generation wireless electronic devices enables our partners to bring products to market quickly and with features that hold great appeal for consumer markets."
BTW 4.0 Enhances Security
Bluetooth has established itself as the clear wireless PAN (Personal Area Network) technology of choice in large corporations as well as small and home office environments. Leading PC OEMs are already shipping Bluetooth in a large number of their commercial notebook PCs and are expecting continuous growth and accelerated adoption into 2005. With this rapid adoption, large enterprises have expressed growing concerns over security and software virus spreads. The new WIDCOMM BTW4.0 software incorporates enhanced security capability to help address these concerns. Broadcom implemented unique software functionality and tested it to ensure a higher level of security, to meet the expectations of the most demanding customers and bolster the software against malicious attacks.
New Software Transforms A/V
PC OEMs have come to appreciate the flexibility of embedding Bluetooth into their desktop and notebook computers to connect wirelessly with mobile phones and PDAs. Wireless mice and keyboards are taking advantage of the technology as well, offering valuable freedom and convenience to consumers. These same advantages are now enabled for stereo headsets and speakers with Broadcom's new BTW 4.0 software. Wireless headsets or speakers enabled with Broadcom Bluetooth technology can stream high quality sound while also performing remote control functions such as pausing or stopping play, and selecting tracks. In addition, consumers can place wireless speakers in all corners of the room, enabling enhanced sound and audio distribution for DVD and CD playback.
New Features and Profiles
Broadcom's WIDCOMM BTW 4.0 incorporates the latest software "profiles," which ensure a common set of features between two Bluetooth devices. Bluetooth profiles are developed and standardized through the Bluetooth Special Interest Group (SIG). BTW 4.0 features many of the latest profiles, which provide advanced multimedia capabilities including:
* GAVDP -- Generic Audio Video Distribution Profile
* A2DP -- Advanced Audio Distribution Profile
* AVRCP -- Audio Video Remote Control Profile
BTW 4.0 also supports the Basic Imaging Profile, which provides the ability to "push" and "pull" images wirelessly between a mobile phone or digital camera and a PC. In addition, the new software release was designed to work seamlessly with Broadcom's BCM2035 and BCM2045 single-chip Bluetooth solutions. It was tested and qualified to work seamlessly with Microsoft's latest operating system update, Windows XP-SP2, thereby ensuring forward compatibility to PC OEMs and end-users as they upgrade to this latest operating system.
End users can be assured that as increasingly advanced Bluetooth A/V applications gain adoption, Broadcom's BTW software will enable a richer and more secure user experience.
Availability
Broadcom's WIDCOMM BTW 4.0 software is currently shipping to Broadcom's early access partners.
[/COLOR]

Finaly here
http://my.so-net.net.tw/dean8888/Widcomm_BTW%204.0.1.700.rar 30MB!

Can't get a windows operated laptop to connect my network

Hello
I have the following set-up: iMac + MacBook pro with Time Capsule. A network has been created protected WPA2. I am trying to connect laptops operated by Windows XP SP2 for one and XP Pro for the other. The connection procedure seems to stop when the network and the laptops are registering the IP adress with the impossibility to read the IP adress.
Anybody can help?
Thanks in advance
Pierre

Basically it is all ok but your last line. When going to:
Time capsule>Internet>internet connexion and connexion sharing then it was "disabled". So i have choosen the suggested option "share a public IP address". By doing that I need to update Timecapsule. When doing the update TC is saying that the following two problems need to be corrected before updating TC. The two following elements are listed, they are called First DHCP adress and second DHCP adress. Then it is saying that the DHCP range I have keyed in is in conflict with the IP address WAN of my wireless apple device. I promise I didn't do that! Then it is quoting the first address: 192.168.1.2
Then there is a possibility to update. I try it after i send the current message.

MSI Neo2 K8N Platinum - Freezing Issue during games

First off greetings to everyone on these forums...
I purchased the MSI Neo2 K8N Platinum motherboard from NewEgg back at the end of March to compliment the AMD 64 "Winchester" processor that I also purchased at that time to replace a slightly older AMD XP "Barton" system that was using the Abit NF7-S motherboard. For the past month I have been fighting an unusual and highly irritating issue that I have noticed during game play and have tried everything that I know of and more in an attempt to remedy this issue, but to no avail. This is the general background of the situation and now I will descibe in greater detail as to what this issue I am referring to is and the symptoms of this issue and some of the various methods used to remedy this issue.
The issue is that while play a game the system experiences a short 5-10 second freeze during the game randomly, but usually several times an hour. During this freezing the sound would loop and as suddenly as the freeze occurs it would cease and the game would continue on as if nothing happened. However, sometimes this would result in the system freezing outright after this short 5-10 second freeze... but it does not feel like a total system freeze, but rather a video freeze as the sound continues and I still have keyboard control... but this does require me to force a manual reboot of the machine itself. I have scowered the internet and various forums in an attempt to find what the issue was and use various methods to remedy this issue, but so far nothing has worked in my favor... but it does seem like this issue has been plaguing other users with the MSI Neo2 Platinum motherboard. Below are some of the methods that I have used in an attempt to solve this issue:
*Default Clock for CPU/Memory/GPU; Over/Under Clock for CPU/Memory/GPU
*Increased voltages to CPU VID, AGP, and Memory
*Disabled/Enabled AGP Fast Writes
*Increased AGP Aperture from 64MB to 512MB
*Enabled/Disabled ATI/nVidia Speedup option in BIOS
*Forced AGP clock lock to 66-67mhz
*Relaxed/Aggressive memory timings
*APIC enabled/disabled
*Gate A20 turbo/normal
*Disabled all unneeded onboard components (Realtek NIC, Sound, SATA)
*Disabled nVidia MAC and attempted to use 3Com Gigabit PCI card instead
*Swapped HDD Cables
*Tried PCI Sound Card (SB Audigy2 ZS Gamer) in PCI Slots 3/4
*Tried video drivers from 71.89 Official to 76.45 beta modified drivers
*Tried 5.10 official nForce drivers to remixed 7.02 nForce drivers (5.10 drivers uses 4.36 GART, higher drivers uses the 4.40 GART)
*Applied all the latest updates from Windows Update Website
*Reinstalled Operating System (Windows XP SP2) 5 different times clean with various settings (APIC on/off, etc...) and different drivers.
*Installed Audio Card (SB Audigy2 ZS Gamer) with older and the latest drivers available from Creative's website
*Replaced PSU (Previously was a Thermaltake 420watt PSU, 18A +12v) with a OCZ Modstream 520watt PSU (28A +12v)
*Video card is KNOWN working from previous build (AMD XP 3000, Abit NF7-S)
*Hard Drive is KNOWN working from previous build
*CD/DVD-ROM drive is kNOWN working from previous build
*Heat is not an issue... all components temperature is well below rated level, the only unknown is the chipset temperature (it has a active heatsink and seems to not be hot to the touch, applied AS5 to it anyway)
*Used latency tweak to the video card
*Used Rivatuner to force constant performance level
*Tweaked BIOS to force even clock rates and forced 1.4v to the GPU Core
*Used original GPU BIOS
*Used MSI Neo2 K8N Bios 1.4 - 1.8 and modified BIOS 1.8
*No background applications are running (not even antivirus)
*Used application to force maximum refresh rates for my monitor
*Memory passed MemTest86+ for over 24 hours
*System passed Prime95 and SuperPi for over 24 hours
*System seems stable in all non gaming related applications
*Checked through various troubleshooting procedures
*Disabled SBDRVDET.EXE using MSCONFIG
*There are no IRQ conflicts outside of PCI system management sharing IRQ11 with the NIC and USB... in APIC there are no IRQ conflicts what so ever. Regardless neither method worked
*Installed AMD 64 drivers from AMD
*Disabled DEP in boot.ini
*...and many other various tweaks and modifications.
System Specifications
CPU - AMD 64 3200+ "Winchester", using Thermaltake Silentboost K8 and AS5
Motherboard - MSI Neo2 K8N Platinum (nForce3 250GB Ultra) - Using Bios version 1.8
Memory - 2X 512MB Corsair XMS TwinX1024-3200C2PT (2 Modules, Memory Slots 1 and 2 used)
Audio - Sound Blaster Audigy2 ZS (PCI Slot 3 used)
NIC - Onboard nVidia MAC, Disabled Realtek NIC
Video - XFX Geforce 6800NU 128MB AGP (BIOS Rev 1) - NV Silencer 5 and AS5
Case - Thermaltake Damier Series 5000
PSU - OCZ Modstream 520watt (28A +12v rail)
HDD - Western Digital 1200JB 7200rpm IDE
DVD-ROM - Lite-On 16X DVD-ROM
Floppy - Mitsumi 1.44MB 3.25"
OS - Windows XP SP2/DirectX 9c
I have been fighting this issue for well over a month now and I am frankly nearly out of ideas, this does not necessarly prevent me from playing games, but this does interfere with the games I do play (especially online games). I do demand absolute stability from the games that I play and this issue only began AFTER I upgraded to the new motherboard, processor, and memory. The only thing I have not tried is something that I do not have access in attempting on this motherboard, and that is increasing the voltage to the chipset.
Here is my theory on what is going on is that I believe is there is a fault with the chipset on this motherboard and this is manifesting itself while I am playing various games on this system. Of course I would like to try increasing the voltage to the chipset as that would increase stability, but there is no option in BIOS to increase the chipset voltage like the previous motherboard I had (Abit NF7-S). It is possible that either a) the chipset is at fault and is causing me this issue or b) the chipset is not recieving enough voltage.
My question to the rest of you is this, what do you think the problem is and what ideas do you have that I may try that I have not tried yet. Additionally if there is nothing else that I may try should I attempt to RMA this motherboard and will that help, and is there any other versions of this motherboard that I should be aware of. I would appreciate any response from a MSI representative and any comments from those that may have positive suggestions for my issue. Thank you in advance for your time and any help that you may be able to render.
The GameMaster...
*EDIT* Added additional methods attempted... (there was a lot... so I did not remember everything that I have tried)

Quote from: dacull on 25-May-05, 16:06:33
Does it only happen in online games, or can it happen in all games? One thing to make sure of is to turn off CRC checksum offload in your NVidia MAC properties (everyone do this, it is incorrectly calculating checksums which leads to servers ignoring your packets). However as you have tried a different network card you can discount this theory.
For me it looks like the biggest culrpit is your 6800NU, i have read alot of bad things about the NU and you have a low bios revision there, just because it worked well against your old chipset doesnt mean it will work well against your current chipset. Sounds like a BIOS fix is needed as some timing is out somewhere.
Ensure Spread Spectrum is off (and as you have already pointed out Fast writes, ATI NV Speedup) and your card is running at default clock.
As a test beg/borrow/steal another graphics card (preferably nvidia) and see how it goes so you can narrow in on your video card.
It is not just one game, but it is more prodominate in certain games than others... the game in question here is Planetside... though I stuck a demo of Unreal Tournament 2004 on a loop bot match and it seemed to have locked up after 4 hours (not sure how many times it experienced that 5-10 freeze as I went to bed). As for the video card it was KNOWN working from a previous build in those same games (Previous build was a AMDXP3000 and a Abit NF7-S nForce2 motherboard). The only components different in this build is the AMD64, the MSI Neo2 K8N, 2 new sticks of Corsair XMS to replace the Corsair ValueSelects, and the SB Audigy2 as I would never use a software codec audio solution. Spread Spectrum is LOCKED in BIOS and disabled... ATI/nVidia speed up was disabled from the start... and I tried the Video Card at default clock, over clocked, as well as under clocked and the same issue resulted... as I said before it is NOT the video card.
There are two other things I could try is use my old Geforce4ti 4200 and see what happens... or even try out WindowsXP 64-bit edition as someone earlier suggested. I wish I could find a new BIOS for my XFX 6800NU, but there there is only the revision 1 BIOS that I was able to find. The mystery continues...
The GameMaster...

How can I change between different JRE in the Same PC

I have two systems.A system can only run in JRE 1.3 and B system can only run in JRE 1.5 enviroment.But I have to run both in one desktop(which use WinXP SP2),how can I do it . I tried to edit the system config using the cmd of regedit , edited some like these.But it did not work .Could anybody tell me how to do? Thanks a lot in advantage.
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{08B0E5C0-4FCB-11CF-AAA5-00401C608501}\TreatAs]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{8AD9C840-044E-11D1-B3E9-00805F499D93}]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{8AD9C840-044E-11D1-B3E9-00805F499D93}\InprocServer32]
[HKEY_LOCAL_MACHINE\SOFTWARE\Classes\JavaPlugin\CLSID]
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Development Kit]CurrentVersion="1.X"
[HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment] CurrentVersion="1.X"
The information of operation system is omitted.
Message was edited by:
daiwill
Operation System is WinXP SP2
Message was edited by:
daiwill

I found some clues last week in these linkes.
http://forum.java.sun.com/thread.jspa?threadID=657406&tstart=150
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html#java
Which has the contents like the below:
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
I tried the method of change the control panel but they did not work either.
Any other helps?
Thanks in advantage.
Message was edited by:
daiwill

Installation of ECC 6.0 on vmware

Dear Team,
I am trying to install ECC 6.0 on VMware workstation, to simulate existing environment.
I have an external HDD of 500 GB out of which I have reserved 290GB for ECC installation.
The VM has 3 GB of memory allocated.
Operating system: windows 2003 sp2
DB: sql 2005, I have verified that tables have been created using sql
JRE 1.4.2_16
In VMware:
I have created C drive with 10 GB , and rest of the space D drive for database files and usr folder.
Installation kicked off well, without errors, I mean there were errors which said " if its a warning you can ignore.
I not able to see any progress in the installation, because logs are not being updated.
The installation GUI is responding well , however its not proceeding further. It has been 6 days that installation has started.
I am sure that ECC will take some time, but I hope not 6 days. Where to check the progress ? which logs do I need to verify?
Is it normal that on VMWare it will take so long time?
Need expert advice.
Regards
dpn ctl

Uday,
last few lines on the sapinst_dev.log:
do the lines "Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP2' is not connected. Returning path." indicate an error , what could be missing, some files in the dump?
TRACE      [iaxxbfile.cpp:139]
           CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP2' is not connected. Returning path.
TRACE      [iaxxbfile.cpp:139]
           CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP3' is not connected. Returning path.
TRACE      [iaxxbfile.cpp:139]
           CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP4' is not connected. Returning path.
TRACE      [iaxxbfile.cpp:139]
           CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP5' is not connected. Returning path.
TRACE      [iaxxbfile.cpp:139]
           CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-1\EXP6' is not connected. Returning path.
TRACE      [iaxxbfile.cpp:139]
           CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-2\EXP7' is not connected. Returning path.
TRACE      [iaxxbfile.cpp:139]
           CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-2\EXP8' is not connected. Returning path.
TRACE      [iaxxbfile.cpp:139]
           CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-2\EXP9' is not connected. Returning path.
TRACE      [iaxxbfile.cpp:139]
           CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-2\EXP10' is not connected. Returning path.
TRACE      [iaxxbfile.cpp:139]
           CIaOsFile::getUNCPath_impl()
Drive for node 'H:\ECC6.0_installation_software\ECC60 Inst Export-2\EXP11' is not connected. Returning path.
TRACE      [synxccuren.cpp:939]
           CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE      [synxccuren.cpp:913]
           CSyCurrentProcessEnvironmentImpl::setEffectiveUser(PSyUser,iastring)
effective user corresponds to real user
TRACE      [synxccuren.cpp:467]
           grantAccessTo
Granted access rights 0xf037f for object winsta0 to user OBTDEV20\oi1adm with inheritance flags 0.
TRACE      [synxccuren.cpp:467]
           grantAccessTo
Granted access rights 0xf01ff for object default to user OBTDEV20\oi1adm with inheritance flags 0.
INFO       2009-07-05 13:20:13 [synxccuren.cpp:877]
           CSyCurrentProcessEnvironmentImpl::setUser()
Switched to user: oi1adm.
TRACE      [synxccuren.cpp:913]
           CSyCurrentProcessEnvironmentImpl::setEffectiveUser(PSyUser,iastring)
effective user corresponds to real user
TRACE      [synxccuren.cpp:787]
           CSyCurrentProcessEnvironmentImpl::setUser()
Terminated current impersonation.
INFO       2009-07-05 13:20:13 [synxcpath.cpp:776]
           CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\import_monitor.java.log.
TRACE      [synxctask.cpp:67]
           CEnvironmentJanitor::CEnvironmentJanitor()
Changing current processenvironment
TRACE      [synxccuren.cpp:467]
           grantAccessTo
Granted access rights 0xf037f for object winsta0 to
regards
dpn
Edited by: dpn ctl on Jul 13, 2009 5:48 AM

Problem in Starting the Analytical Server

Hi,
I was instaled the Hyperion 9.3 license,Shared services, Aanlytical servers in my PC successfully it was running. But after restart my system The Analytical server get corrupted it was not started. After runnig the configuration utility it was woking. What is the reason ?. Could you please give me the solution.. My Operating system Windows XP SP2.
Thanks in advance

Hi,
NoClassDefFoundError signifies that there is a classpath problem.
May be you are missing some critical jars in your classpath
for ex. weblogic.jar, jdk's rt.jar or something else.
You need to find this out.
HTH
VJ

Adobe Acrobat 8 Pro Application Error Event ID 1000

Version: Adobe Acrobat 8 Pro (Updated)
Operating System: Windows XP (Sp2)
Launch Adobe Acrobat 8 Pro
Select File and open a PDF file
Popup appears: Reading Untagged Document
Then and error appears ... Adobe Acrobat 8.1 has encountered a problem and needs to close
Also receive same error when I select Edit\Preferences
Application Event log contains the following:
Application Error Event ID 1000
Faulting application acrobat.exe, version 8.1.0.137, faulting module admplugin.apl, version 3.16.128.32, fault address 0x000a7bf1.
Have uninstalled and reinstalled application...no change
Any help would be apprciated

No, I have not.
Had another laptop and used it.
Re-imaged laptop exhibiting the issue and moved on
Edward Bailey | Network Administrator | Pizza Inn, Inc
t. 469.384.5231 [email protected]

Pc suite backup files

Im basically trying to view my contact list without the phone attached to the pc. I have backed up the data on the phone including the contact list to one of your lovely .nbu files.
How exactly do i do anything useful with these files? There doesnt seem to be any tools in the pc suite that allows me to view the contents let alone edit it in any way.
what im really trying to do is migrate my contact numbers to a new phone (shock horror its not a nokia) but it seems like an impossible task.
Random stuff you like included
operating system : windows xp sp2
nokia pc suite software : 6.81.13.0
connectivity : datacable
phone : 6210 one not so carefull owner

I had a small problem with the 6230i phone and I thought that I'll just get it fixed. (The phonebook freezed time to time.)
So, I made full backup from the phone memory with latest pc-suite (6.81) before giving it to the service.
The trouble began yesterday when I got the phone back from service. I found that I can't restore full backup because they had updated the phones software to version 03.88. Now I can't restore contacts at all. Everything else.. pictures and all that rubbish can be restored, but not contacts. I was stupid enough not to synchronize contacts with the Outlook before. The problem seems to be that things can't be recovered because the phone is different according to the pc-suite software.
Nokia has a policy that they don't dowgrade phones software version. So, now I must find a way to restore contacts from this nice .nbu file. Any bright ideas? I know that it's possible to fix those old backup files so that pc-suite don't mind if the phone version is different.

Download basket content could not read

Dear Consultant
I have downloaded and installed the SAP download manager. I have
configured the download manager and the screen shot for configuration
is
attached. During the runing of download manager. I am getting the below
messages:
"The basket content could not ne read. The following exception occurred:Unable to read data from the SAP Service Marketplace: Check your settings and try again"
But I am getting the below message before getting error as below: The
message show thatit is connecting but could not redirect to the respective url
Reading your basket content (Connecting to www.service.sap.com)
Redirecting to websmp205.sap-ag.de
Redirecting to websmp108.sap-ag.de
Redirecting to websmp105.sap-ag.de
Redirecting to websmp206.sap-ag.de
Redirecting to websmp208.sap-ag.de
Redirecting to websmp207.sap-ag.de
Redirecting to websmp101.sap-ag.de
Redirecting to websmp103.sap-ag.de
Requestyou to please provide the solution: The system details are as
below
1.Operating System : Window XP (SP2)
2. Java Run Time Version 1.4.2_19
Regards
Vimal Pathak

Hi
Thanks
I have checked nothing like this ..
This is error coming as a socket error.
I have downgraded the java ..but still getting the same
error.
Regards
Vimal

I am not able to sync my ipod touch with itunes.

Hi,
Whenever i try to sync my ipod touch with itunes. I get the an error "The ipod could not be synced because the sync session failed to start".
The sync process could not be started.
I am facing these issues from the day when i upgraded my ipod touch to ios 5.0.1
itunes version on my PC: 10.5.1.42
Operating system: Windows XP SP2
Please let me know how can i overcome this problem.

Take the old hard drive and try one of the data recovery programs like Data Rescue 3 and others.
Apple didn't in the past support re download of purchased material.
And there are so many ways to backup data, clone a drive, archive, from the free to the built-in to the more expensive.
I keep the OS on one drive, media files and data on another drive, and a good 1.5TB drive today costs $109. Paragon has backup, clone (makes a full boot drive, not an 'image' such as Acronis or Ghost) so you can use it almost like a daily or weekly mirror.
Depends on the software and data lost and cost of recovery programs and services, but it may be possible. Put the drive in a USB case perhaps and a new drive to recover the files to.

Unable to Preview the Old Version Dashboard in Xcelsius 2008 sp4 fp4.1

Hi,
Recently we updated the Xcelsius and Live office.
Previous Versions:
Xcelsius 2008 sp3 fp 3.6
Live office 3.1
Update Versions:
Xcelsius 2008 sp4 fp4.1
Live office 3.1 sp3 then sp5
So now i am using Xcelsius 2008 sp4 fp4.1 and Live office 3.1 sp5.
Operating System:Windows Vista sp2.
Problem is i am able to open old version of dashboards( which was developed using Xcelsius 2008 sp3 fp 3.6 & Live office 3.1) in new version (Xcelsius 2008 sp4 fp4.1 & Live office 3.1 sp5) but i am not able to preview the dashboards. Xcelsius is not able to generate the Swf.It's is not throwing any error but swf generation process is keep on going.
Note: We install same Service Packs & Fixed packs Windows 7.It's working fine.
Please help me.
Regards,
Rajesh Reddy

Hi
Have you checked the PAM in the Service Market Place as I don't see Windows vista SP2 as supported only
Windows Vista
Windows Vista SP1
Regards
F.

Get booted out as applets load

i got a new error message yesterday....it says applets in this html page require a version of java different from the one the browser is currently using: in order to run the applets in the html page, a new browser session is required..press yes to start a new browser session....... and in the applet window it said JAVA PLUGIN DETECTED JRE COLLISION...........................so my question is that when i erase the newer version of java and load an older one...then i go back to my ameritrade account to load the applets again....it prompts me back to uploading the newest version of java the 1.4.......it wont read the older plug in.....so what am i supposed to do......i always get booted out...............HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Maybe the answer for someone who is using FireFox!
Java plug-in detected jre collision ( Firefox 2.0.0.6 ) Java applet
Mozilla Firefox error Java JRE applet code
Finally after two days I got ( Java applet ) working; really crazy one!
Two days of frustration In the end a really easy Fix but no-one can tell you what is wrong!!
I will place this Helping note in this forum sure this will help someone!!
Original Reference Link: http://forums.java.net/jive/message.jspa?messageID=234129#234129
Search all over Googles to get it fixed no luck! Why not one forum gives this resold too fix this problem??
Tried everything reinstalled JRE 1.4.2 then JRE 1.5. then JRE1.6.1 nothing worked!
Then I started playing in the Firefox plugin directory removed all plugin's and copied them back one by one thats how I
found the bad file creating the whole problem!
All I ended up doing is I removed this file in the Firefox plugin Dir ( NPOJI610.dll ) and all work's FIN
now!
(Don't know what this file is used for but no problem <applet> works and no crash and error anymore!!)
Java <applet> images working now on my Firefox! Also the Java test tool ( Test your JVM ) works!
http://java.com/en/download/help/testvm.xml
Resold:
Your Java configuration is:
Vendor: Sun Microsystems Inc.
Version: 6 update 2
Operating System: Windows XP SP2
OS version: 5.1
All the Errors I got before!!
1) FireFox Crash when I load my Web page with <applet> </applet> instruction Init!
2) Java plug-in detected jre collision
3) Also the Firefox Browser is prompting to open new Tap!
4) FireFox Error msg:
The prompt "Applet(s) in this HTML page requires a version of java different from the one the browser is currently
using. In order to run the applet(s) in this HTMLpage, a new browser session is required, press 'Yes'
to start a new browser session" appears but with no 'Yes' button to press.
Browser Detail:
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6
Java Installed up to Date version!
( jdk-6u2-windows-i586-p.exe ) JER is include in this download size= ( 67.147 MB ) Download Link:
Installation Resold= only have this version Installed!
C:\PROGRAM FILES\java\jdk1.6.0_02
C:\PROGRAM FILES\Java\jre1.6.0_02
Still got in my Java Dir ( Java Launcher ) & ( Java3D ) installed!
Make sure after installation to clear all the Cache on all browser's and restart your computer!!
With this combination I got: ( IE v6,) ( Opera v9.23 ) ( Netscape Navigator/9.0b3 ) and
Firefox/2.0.0.6 WORKING!
NO MORE ERRORS and Java <applet> </applet> code is loading and working now!
A Sample this was the web page I had the problem with: htp://pnpb.110mb.com/
Note:
Just fun I deed I copy this bad file NPOJI610.dll to the Netscape plugin directory and
there we go I get the exact same problem as I had before with FireFox Java <applet> will not working!
Hope this will Help someone with the same problem I had!
Regards;
Mario
Let me know if this worked for you! [email protected]

ForEach Operator in BO 4 SP2

Similar Messages

Maybe you are looking for