Forecast and actual view in PPB

Hi experts
Despite selection of forecast and actual dates in Set of Dates/View in PPB, i am unable to see the horizantal bars for forecast and acutal dates for activities. (Able to see only basic and start/finnish of activities can be seen)
My intention is to see the plan and forecast dates at one place for evaluation purpose.
Is there anything missing from myside? Please advise.
warm regards
ramSiva

Hi Ahmed
The confirmed activity contains actual start and finish dates.
warm regards
ramSiva

Similar Messages

I have an old file with an .A4P video from 1999. I don't own any Adobe products (and don't really want to buy any). I just want to be able to convert the file to something that I can actually view. Any help?

I have an old file with an .A4P video from 1999. I don't own any Adobe products (and don't really want to buy any). I just want to be able to convert the file to something that I can actually view. Any help?
I was a kid when I made a documentary for a school project. I've been trying to figure out how to retrieve the file. 4 years ago, I was able to get the files off the Iomega Zip drive (finally), but I now see the file is saved as a .A4P. There is also a file saved as a .PKG as well, but I don't know how to open this with my Windows 8 COmputer.

.a4p is an Authorware v.4 (Windows) project.
Interesting you have it as a .pkg...usually that's a published-on-a- Mac extension, if I recall.
At any rate, can you put the file up on a Box, Dropbox, FTP, etc...and send me a URL?
I should be able to published it so you can view the project (it would be an .exe).
It can't be converted to anything though - not without manual effort.

Sales forecasting, planning and actuals

Hi all,
How does one perform sales forecasting and planning in ECC? I understand there is SIS which will allow us to retrieve our sales actuals data, but how do we input forecasting and planning?
Thanks,

For MTS scenarios, he normal planning path is:
SOP (could be based on SIS) ---> Demand Management ---> MPS (optional) ---> MRP ---> Capacity Planning (optional).

I need to know the difference between planned SKF and Actual SKF from business view and when I can use one of them ?

I need just to know the difference between plan SKF and Actual SKF in business example and when I use one of them.
thanks

Hi Salaam,
Statistical Key Figure (SKF) is a base to allocate the cost between cost centers. Usually, common cost centers cost should allocate to respective department cost centers on monthly basis.
Some of SKFs are: Calculating floor rent on SFT, Telephone charges on No. of units, and employees head count is with "Each" in SAP.
Apart from Ajay's reply, you can consider the Canteen exp in an organization. Assume Admin, Fin and Mfg departments are getting food services from Canteen. Here, total monthly cost of Canteen exp should be allocated to respective departments. Here, we use SKF as total head count of each department and distribute the cost.
Planned SKF is what you planned on the beginning of a period. (Assume head count was planned as 30 in the month beginning)
Actual SKF is what exactly you consumed over the period. (Actual employees provided canteen services during the month is 25)
BR, Srinivas Salpala

Is there standard report for planned and actual devlivery date?

Hi Guru,
Could you help me to find standard report to compare planned delivery date in PO and actual delivery date (GR Posting date)?
I wonder, Is there standard report for planned and actual delivery date?
or I have to create a customizing report.
Thank you very much.

hi
i dont think it is possible to see both in one pan so try to create some Z report
u try ME80fn here u have to change the views ,in del shedule view u can see the delivery dtae and in PO histry view u can see the posting date
regards
kunal

Seeing times in day and week view

Is it possible to see times (eg 7.00am, 7.30am, 8.00am, 8.30am, 9.00am, etc etc) along the y axis in day and week view of iCal? I can only see actual times when I in the process of making appointments, ie when wiping my cursor over a section of the page.
johnC

See Fred Grieve's answer and John Maisey's solution here:
http://discussions.apple.com/thread.jspa?threadID=1868347&tstart=0

Forecast consumption situation not shown in Forecast tab-RRP3 View

Hi,
I have released Forecast(FA) from DP to SNP.I am able to see the forecasts in Product view Elements tab.But I am not able to see any Forecast consumption details and overview in Forecast tab of Product view.It is showing if i create forecast manually in RRP3 view itself.How to bring the forecast data in forecast tab of RRP3 view.
Thanks&Regards
Venkadesh

Hi Venkadesh,
This is a known issue and can be solved by SAP Note 743646 - Incorrect consumption situation in product view.
Using a report, you can adjust the consumption situation in the element view so that it is the same as the consumption situation in the forecasting view. To do this, call transaction SE38 and create the report Z_CSP_DELTA_FCST with the title "Check of the consumption situation"; Type: Executable program; Status: Test program; Application: Materials Management. Delete the first line "REPORT..." from the new report then use the cut and paste functions to add the program to the correction instructions.
Try this out and let me kow if this solves your purpose.
Many thanks,
Amit Sen

Effective and actual ppi?

What's the difference between effective and actual ppi? Is there any reason I need to adjust the actual ppi if it's more than 300 x 300 ppi?

240 effective ppi is probably adequate for almost any commercial printing other than fine art reproduction. 115 could be pushing your luck, but there are so many variables that it's impossible to say anything absolute. What is the intended use and the intended viewing distance? What's the printing method?
You might want to take a look at http://forums.adobe.com/message/2042202#2042202

Select Count(*) and actual row are differ: 136 rows vs 65k x 7 rows

Dear All,
Good morning. Need your advices. We had a view which is running and producing output to excel files. But recently after one of ours database migration, it were producing differ result: Select Count(*) and actual row are differ: 136 rows vs 65k x 7 rows. Error happen when we export out the row to csv file is produced 65000 rows x 7 worksheep. But when perform select count(*) from RTNEWWIP, result return: 136 rows.
Is there any way to trace below sql to find where go wrong?
The Veiw as below:
CREATE OR REPLACE VIEW RTNEWWIP
(FAB_ID, PO, PRD_NO, SHP_PRD_NO, LOT,
WIP_QTY, ROUTEDESC, IN_TIME, STAY_DAY, BACK_DAY,
WO_FCST_DATE, SHIP_FCST_DATE, SHIP_CONF_DATE, WS_DATE, ROUTERATIO,
PROCESS, LOTSTATUS, LOTTYPE, RETICLEVERSION, PROCESSVERSION,
ROUTESEQUENCE, PRIORITY, PROCESSGEN, PROCESSFAMILY)
AS
select
--ord.order_no,
'SILTERRA' FAB_ID,
wip.PO_NUMBER PO,
wip.FW_DEVICE PRD_NO,
wip.USER_ITEM_DESCRIPTION SHP_PRD_NO,
wip.LOT_ID LOT,
wip.CURR_QTY WIP_QTY,
wip.STEP_DESC ROUTEDESC,
to_char(wip.RECORD_START_DATE,'DD-MON-YYYY HH24:MI:SS') IN_TIME,
to_char((sysdate - wip.RECORD_START_DATE),'9999D99') STAY_DAY,
to_char((wip.SCHEDULED_COMPLETE_DATE - sysdate),'9999D99') BACK_DAY,
-- (sysdate - wip.RECORD_START_DATE) STAY_DAY,
-- (wip.SCHEDULED_COMPLETE_DATE - sysdate) BACK_DAY,
to_char(wip.SCHEDULED_COMPLETE_DATE,'DD-MON-YYYY') WO_FCST_DATE,
to_char((wip.SCHEDULED_COMPLETE_DATE + 1),'DD-MON-YYYY') SHIP_FCST_DATE,
--nvl(oel.attribute15, to_char(sysdate+3650,'DD-MON-YYYY')) SHIP_CONF_DATE,
to_char(nvl(to_date(oel.attribute15,'DD-MON-YYYY'), sysdate+3650),'DD-MON-YYYY') SHIP_CONF_DATE,
to_char(wip.LOT_START_DATE,'DD-MON-YYYY') WS_DATE,
--wip.MASK_NO || '/' || wip.MASK_TOTAL ROUTERATIO,
'''' ||wip.MASK_NO || '/' || wip.MASK_TOTAL ROUTERATIO,
wip.PLAN_NAME_ACTIVE PROCESS,
wip.LOT_STATUS LOTSTATUS,
wip.LOT_TYPE LOTTYPE,
0 RETICLEVERSION,
wip.PLAN_VERSION_ACTIVE PROCESSVERSION,
0 ROUTESEQUENCE,
wip.PRIORITY PRIORITY,
' ' PROCESSGEN,
' ' PROCESSFAMILY
from wip_report wip, lot_fact lf, order_fact orf, order_dim ord,
apps.oe_order_headers_all@prod_myfabetl oeh,
apps.oe_order_lines_all@prod_myfabetl oel
where wip.CUSTNAME like 'Realtek%'
--AND WIP.FW_DEVICE like '%R25C'
and wip.ACTIVE_FACT_KEY = lf.RECORD_KEY
and lf.ORDER_FACT_KEY = orf.RECORD_KEY
and orf.ORDER_KEY = ord.RECORD_KEY
and ord.ORDER_NO = to_char(oeh.order_number)
and oeh.header_id = oel.header_id
and orf.LINE_ITEM_NUMBER = to_char(oel.line_number)
and orf.ITEM_SCHEDULE = to_char(oel.shipment_number)
and wip.LOT_TYPE in ('ENX','PRA','PRD','PRT','CSK','MPW')
union all
select --od.order_no,'
'SILTERRA' FAB_ID,
od.CUST_PO PO,
imd.FW_DEVICE_ID PRD_NO,
nvl(orf.USER_ITEM_DESCRIPTION, nvl(imd.CUST_DEVICE_ID, imd.FW_DEVICE_ID)) SHP_PRD_NO,
sfl.LOTID LOT,
sfl.currentcompqty WIP_QTY,
'CREATED' ROUTEDESC,
to_char(to_date(substr(recordstartdate,1, 14), 'yyyymmddhh24miss'), 'DD-MON-YYYY HH24:MI:SS') IN_TIME,
--sysdate - to_date(substr(recordstartdate,1, 14), 'yyyymmddhh24miss') STAY_DAY,
--to_date(sfl.scheduledcompletedate,'yyyymmdd') - sysdate BACK_DAY,
to_char(sysdate - to_date(substr(recordstartdate,1, 14), 'yyyymmddhh24miss'),'9999D99') STAY_DAY,
to_char(to_date(sfl.scheduledcompletedate,'yyyymmdd') - sysdate,'9999D99')BACK_DAY,
to_char(to_date(sfl.scheduledcompletedate,'yyyymmdd'),'DD-MON-YYYY') WO_FCST_DATE,
to_char(to_date(sfl.scheduledcompletedate,'yyyymmdd') + 1, 'DD-MON-YYYY') SHIP_FCST_DATE,
--nvl(oel.attribute15, to_char(sysdate+3650,'DD-MON-YYYY')) SHIP_CONF_DATE,
to_char(nvl(to_date(oel.attribute15,'DD-MON-YYYY'), sysdate+3650),'DD-MON-YYYY') SHIP_CONF_DATE,
to_char(to_date(sfl.startdate,'yyyymmdd'), 'DD-MON-YYYY') WS_DATE,
' ' ROUTERATIO,
sfl.tempprocessplan PROCESS,
sfl.currentstatus LOTSTATUS,
sfl.currenttype LOTTYPE,
0 RETICLEVERSION,
0 PROCESSVERSION,
0 ROUTESEQUENCE,
' ' PRIORITY,
' ' PROCESSGEN,
' ' PROCESSFAMILY
from SIL_FW_LOTCREATED_VIEW sfl, order_dim od, order_fact orf, item_master_dim imd,
apps.oe_order_headers_all@prod_myfabetl oeh,
apps.oe_order_lines_all@prod_myfabetl oel
where substr(sfl.salesorderno,1,instr(sfl.salesorderno,'-',1,1)-1)= to_char(od.ORDER_NO)
and od.RECORD_KEY = orf.ORDER_KEY
and od.RECORD_CURRENT_FLAG = 1
and orf.RECORD_CURRENT_FLAG =1
and to_char(orf.LINE_ITEM_NUMBER) = substr(sfl.salesorderno,instr(sfl.salesorderno, '-',1,1) +1, (instr(sfl.salesorderno, '.',1,1) -1) - instr(sfl.salesorderno, '-',1,1))
and to_char(orf.ITEM_SCHEDULE) = substr(sfl.salesorderno,instr(sfl.salesorderno, '.',1,1) +1, length(salesorderno) - instr(sfl.salesorderno, '.',1,1))
and orf.ITEM_MASTER_KEY = imd.RECORD_KEY
and sfl.customername = 'Realtek'
and od.ORDER_NO = to_char(oeh.order_number)
and oeh.header_id = oel.header_id
and orf.LINE_ITEM_NUMBER = to_char(oel.line_number)
and orf.ITEM_SCHEDULE = to_char(oel.shipment_number);
select count(*) from rtnewwip;
COUNT(*)
136
1 row selected

query might be referring to different environment/schema as you are using database link to access some tables.
getting result/count from view means executing query which forms that view. try to run that query separately and see the output.
it may help you to debug

Planned Delivery Date and Actual Delivery date.

Hi,
Is there a report in SAP which shows the delivery date of a PO line item and actual GR posting date from PO history in one report?
I need to display the planned delivery date and actual delivery date in one report, preferably in columns next to each other.
Thanks in advance.

Hi
To my knowledge there is no such report. You will have to develop this report through ABAP help. You need to pick the planned delivery date from the PO and GR posting date from material document. Both this fields (EEIND & BUDAT) can be viewed in the PO history.
However, challenge will be when you have multiple delivery dates and receipt posting dates are for part quantities.
Regards,
Jagadeesh

How to set MM02 should not allow to change account and costing view

Hi all guru's
How to set MM02 should not allow to change account and costing view details for orher users expect me,plz help me
thanks
ramesh

Hi Ramesh,
                   Use the Authorization Object: M_MATE_STA     Material Master: Maintenance Statuses
Below are the Views for the MM02, Field STATM
Whichever not wanted to be changed, please dont provide them.
A     Work scheduling
B     Accounting
C     Classification
D     MRP
E     Purchasing
F     Production resources/tools
G     Costing
K     Basic data
L     Storage
P     Forecasting
Q     Quality management
S     Warehouse management
V     Sales
X     Plant stocks
Z     Storage location stocks
Regards,
Yawar Khan
Edited by: 1234_abcd on Jan 10, 2012 8:14 AM

Difference in print preview and actual print

hi all,
we are using o/p types and sap scrits to get the print out. but there is a diff betwenn the preview and actual print. some fields that are not visible or suppressed in the preview are appeearing on the print. moreover if the same invoice is printed with diff. o/p types sucessively some values too increase with each subsequent o/p. we are doin some addtion of values on the script
as a temporary way out we are printing by completely exiting vf02/03 after the preview, re-entreing vf02/03 and directly shooting the print w/o viewing the preview. this i have to do for each o/p type. but this is a very inconvenient way.
wat is the cause for this
thnx in advance
saurabh

Hi Ruchit,
              Yeah can you say me how to correct the issue.
               we are using Hp 2200 pcl series printer.
               I have even tried using the device type
               with this specific name but it did not do the need.
               Can you say me what can be done to resolve this.
Regards,
Vamshi.

Diff bt Help view and Maintanence view

hi gem's
i need the diff bt Help view and Maintanence view with example...............

Hi
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
Regards
Anji

Bar chart(Ghantt chart) for Plan and actual of production order

I want to know that any standard Ghantt chart (Bar chart) is available to view the plan and actual qty, execution start and finish time of production order.
In CO01/02/03 it shows only the planned execution time in Ghantt chart,but it doesnot show the actuals.

CM07 gives about the information of capacity allocation. It will not show the actual execution from date and to date.
I want to see the Planned from period to to-period and actual also in bar chart form.

How can i get difference in base plan and actual/current plan for a project

Hi PS Experts,
How can i get difference in base plan and actual plan .
For example-
Project1 is created for 10 days (start and end date difference).
Now in between -project is extended/changed for 12 days .
What is the way to get 2 days as a difference in base plan and current plan.
Thanks
Suraj prakash

Hi Suraj,
You can follow a convention that -
(1) Forecast Start/Finish dates: Used only for Primary planning, once initial planning is done you should not change these dates.
Now, you will copy the same dates in Basic Start/Finish dates also.
(2) Basic Start/Finish dates: Whatever changes are done after the initial planning, you will make the changes only in Basic Start/Finish dates.
So, in Project Planning board, if you enable Forecast and Basic dates with different color coding, you can clearly see the variation in the Project schedule.
Hope this helps.

Forecast and actual view in PPB

Similar Messages

Maybe you are looking for