Forecast error Messages

Dear Friends:
In forecast view, I got the folllowing error messages.
1.Model Choice Process 2 accessed
2.Initialization started
3.Ex-post Forecast carried out
4.Time series Characteristic changed.
How to overcome the errors?Please advise.
All the help will be greatly Appreciated.
Thanks&Regards
MMLearner

Hello Srini,
as far as I can see, these messages are just informations. Do they appear as error messages?
Kind regards,
Thomas

Similar Messages

Forecasting Error messages : CBP with auto model selection

Hi
I need to understand forecasting errors. Im working on consumption based planning with MRP type 'V2', when i execute the forecast i get error messages as"timeseries characteristics changed", "parameter optimization accesssed", "expost forecast carried out" etc. I checked in the customization where the errors are assigned to error classes(class 1 to 8). Can someone tell me how to interpret these errors, if possible any documentation reg this errors would be useful. "[email protected]"
Regards
Sam
Message was edited by:
sam litecky

Hi
My requirement is to calculate reorder point and safety stock via past consumption, so thats why im using MRP type V2. Pls correct me if this mrp type is wrong for calculating safety stock and reorder point based on past consumption or to use any other mrp type. any documentation on forecast error messages would be really great with points assured."[email protected]"
Regards
Sam
Message was edited by:
sam litecky

Strange error message duting Creation bid invitation

hi!
i try to create Bid invitation and add Bidder with contact person
and get strange error message
Message not found (in main memory)
Do you know what's a problem?
Thanks.

Hi
<b>Which System version are using ?</b>
<u>Please go through the following SAP OSS Notes -></u>
Note 1037262 BBP_QUOT_BOB: Surrogate Bid receives Message not found error
Note 787154 Unreasonable error message in contract output forecast
Note 732472 Incomplete attributes of a user lead to termination
Note 684024 Error "Message not found (in main memory)"
Note 641960 New processing of terms of payment in EBP 3.5
Note 502534 Message "Log not found (in main memory)" in CW
Hope this will definitely help.
Regards
- Atul

DP: Composite forecast - error (periodicities)

Dear DP'ers
When trying to run a composite forecast in interactive planning I recieve the following error message:
"Period is invalid for periodicity" and the forecast is cancelled.
I have compared the forecast models to the storage bucket profile and the time bucket profile used in the planning book. Everything looks ok.
Any ideas?
Best regards,
Anders Thinggaard

Hi Anders,
Check whether the planning area is initialised recently with
all time series objects created
Also Check sap note 358658
Regards
R. Senthil Mareeswaran.

Error message when doing invoice verification.

Hi Gurus,
During doing invoice verificition with delivery notes.Im getting a error message that level F1 belong to cash postion,source symbol PSK.Plz any body can help me to solve it
Thanx

Hi
Planning level belongs to the cash position, which means you can only use it for G/L account line items.
Levels are defined and allocated to a source symbol in view V_T036. The source symbol is allocated to the cash position or the liquidity forecast in view V_T039.
Please check these Tables using Transaction SM30

Outline Error Message

When I try to change the Hierarchy under Hierarchy Information any of the choices to stored, dynamic or hierarchies enabled in the member properties tab for a Gen1 member it gives me the following message.
Invalid Aggregate Level Usage. Primary hierarchies cannot have usage 'Consider Bottom Level Only', secondary hierarchies cannot have usage 'Consider Top Level Only' or 'Never Aggregate to Intermediate Levels'
Unable to figure out if this is an error message, if it is do I need to change anything in the hierarchy of that dimension?
Thanks for any help!

This is what I meant
SCENARIO Multiple Hierarchies Enabled <3> (Label Only)
          Actuals Stored # Default # (~)
          Forecasting Stored # Default # (~) <4> (Label Only)
               Forecast1 (~)
               Forecast2 (~)
               Forecast3 (~)
               STFCST (~) (Alias: Short Term Forecast)
          Variance Dynamic (~) <7> (Label Only)
               FTFVAR (~)
                    Forecast3 (Shared Member)
                    Forecast2 (Shared Member)
I Mean something like this
Regards
Amarnath

Interactive demand planning -statistical forecasting error

Hell APO DP experts,
We are implementing CBF functionality in demand planning. In /SAPAPO/SDP94 - Interactive Demand Planning, when we try to run forecast we are getting a message:
Not possible to carry out the forecast - no historical data
Message no. /SAPAPO/MA502
although the historical data is there.
Any info on this?
Regards
Pandit

Hi,
If you are working on SAP APO 4.0/4.1,
Check OSS Note 790517 - No error message "No historical data available".
Implement the corrections as mentioned in the message.
Warm regards,
Prem

Windows Vista: Ipod Error Message, no longer read by PCs

Hello,
I have a 5th generation black ipod video with 30GB of memory.
The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
Any advice would be greatly appreciated! Thanks!

you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

Error message into a Variable.

Dear users,
I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
My requirement is like this:
I have a message class in which I want to define a text 'Employee number & not found'.
I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
lv_text = e0xx(messageclass) USING '1234' which stores the text 'Employee number 1234 not found' in lv_text.
How would I acheive it??
Thanks, V!

Try tis way
message e999(00) with i_emp-empno into lv_text.
press f1 in message will provide you more details
a®

IPod seen by windows, not by iTunes+ weird error message

I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
and why is there no email adress from apple for service qustions? 10x

I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
Did you read the document i linked you to? here's another link to it:
Putting iPod into Disk Mode
whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
... never mind ... i guess you've fixed it anyway ...

Error message iPod cannot update b/c all of the playlists no longer exist

Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
PC Windows XP

hiya!
And my playlists are still on the left side in my iTunes. They do exist.
let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
love, b

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

IPod Error Message: "The disk could not be read from or written to."

Hello!
I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
Any help would be greatly appreciated. Thank you in advance. ^_^
PowerBook G4 Mac OS X (10.4.3) 15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

Okay I went thru that entire list and here's what I got...
(1) My OS is XP and is running fine.
(2) I've updated my windows
(3) I don't know of any software that might be interfering.
(4) There are no damaged files.
(5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
(6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
(7) The USB cord is firmly connected into my USB port and my iPod
(8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
(9) I will try another USB cord to see if that works.
Is there anything else that I can do? Can Apple fix this?
Please let me know.

IPod Touch will no longer sync...error message.

For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone?

What is the exact wording of the error message?

Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive. The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache. There are 4 files in there that are taking up 124 GB! Can I simply delete these files or will it corrupt my regular files? I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

Yes, you can delete the cache files manually, Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches. Depending on your files, that can take a few minutes or several hours.
A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

Forecast error Messages

Similar Messages

Maybe you are looking for