Forecast run MP30 be to disabled for future

One of the user has by mistake made a forecast run at a plant level (T code : MP30)leading to forecast view added to the materials in the plant. This leads to Unplanned Requirements appearing in the Stock requirement List.
How do we reverse these changes. Can we switch off Forecast related requirement for the plant via. some T code? If we delete the forecast from MM, these quantity disappear from MD04 but it seems this is not sufficient.
Also, how can we figure out who made this run ? These changes are not recorded in the MM and there is no trace of who did it ?

Ravi,
I believe that you have misread the events. I don't believe MP30 can be run until the forecast view in the MM has first been maintained.
If you wish to know who created the forecasting view of the MM, you can look in MM history for an MM01 entry. I don't believe that MP30 can create this view.
Forecasts by themselves do not normally create unplanned issues, they must be released to demand planning, where they create PIRs. I suspect you may have some automatic jobs that are performing this task behind the scenes.
If you wish to deactivate the forecast, go to MM02, forecast tab. Select forecast model zero, save. existing forecasts and relevant data will be deleted. Then, delete any PIRs that you don't want.
Rgds,
DB49

Similar Messages

Running out of space, planning for future growth, Help?

Hi,
We are currently planning for a new Structure to be implemented... But I am stock on what the best approach may be.
Having spent some time on Miscrosoft documents looking for answer, I am having to hope for a solution on this forum...
If you have time to spare, I would appreciate your help.
Our current set up, 4 Site collections (one per jurisdictions)...
First problem, sharing and collaborate between these site collections.... It can't happen...??
Second problem... 2 of our 4 collections are maxed out at just under 200Gb. I undertstand that it is not recommended to go beyond... in Fact when we did, the whole Site ran very slow...
So we are contemplating Re-creating our Sharepoint environment, and create a Site Collection per CLient, to allow for growth, per client, But this seems a little extreme, especially when we have way more than say... a few clients....
So whats best practice here....
We have various teams working in different Jurisdictions, sharing, collaborating on each clients...
The ideal scenario would be a single Team Site Collection, but a Sub Site per Client, but we would go way above the 200Gb Limit...
Where do we go from here?
Anyone experienced this ? Any suggestions?
Apologies if this topic has been covered...
Steph

If you have plenty of disk space but are worried about the 200GB database limit then you could either add additional content databases to your site collection or use RBS (Remote Blob Storage) to store large files directly on disk as opposed to inside the
database.
I have written about my experience enabling RBS here:
http://www.adventuresinsharepoint.co.uk/index.php/2013/10/05/enable-filestream-and-provision-a-remote-blob-store/
And there is information on adding content databases here:
http://technet.microsoft.com/en-us/library/cc825317(v=office.14).aspx

Can't Run AFAB - Posting run requested for future period

Hi,
While taking depreciation run for company code in AFAB system is generating the error message "Posting run for future period requested (check entry)" SAP error AA697
Diagnosis
There was a check of your entries in the company code and posting period fields for the current system date. The result of this check is that you requested a posting run for company code xxxx for a future fiscal period.
Please help me, cause I must close the period.
Thanks

Hi
Check Table TABA, whats your last posted period for depreciation
If you are executing depreciation for last period + 1, then this error is not justified
If you are doing it for last period + 2, then its justified
Br, Ajay M

Depreciation error - Unplanned posting run allow for future period

Dear ,
Need urgent advice for depreciation error happen in our production system.
FYI, our fiscal year variant 2013 = Feb 2012 - Jan 2013 ( We are now at month-end close for Pr 1 2013 ).And fiscal year close 2012 AJAB and Carry forward ARJW have successfully run for new FY 2013.
In short, in our asset accounting user was accidentally run unplannned depreciation for future period 12/2013 of one particular asset, while we are now in Pr 1/2013. And, Pr12/2013 is open for asset posting.However, no FI posting posted into the system.
Just a curiosity as to why system allow user to run unplanned depreciation for future posting without giving an error message to follow the posting cycle.
The impact/error of above unplanned depreciation run:
User is not allowed to execute AFAB depreciation run for Pr 1/2013. Even worst, in the AFAB program shows from Pr 1/2013 - 12/2013 is already posted when we do depreciation test run. We can't perform any planned,repeat,restart for Pr1/2013.
Because of only one asset had accidentally run for Pr12/2013, all of our asset (96,773 asset) cannot proceed with depreciation run for Pr 1/2013 in the new fiscal year.
This is high priority as it will impact the entire depreciation run for 12 month of our company.
Your early reply on this issue is greatly appreciated.
Thank you,
Regards,
Latifah

Thank you for the response.
FYI, the asset posting actually has been executed but no document was posted as there's no value.
I've check the 2 tables below:
ANLC - No numbers of run for any period in FY2013
ANLP - No depreciation run was posted in FY13 (all periods).
Is there anyway for us to do normal planned run for Pr 1/2013? As i understand SAP has no function to perform reversal depreciation run in AFAB. How
With regard to the posting period 12/2013 that is open for user, I already highlighted this to the respective custodian.
Thanks.

What is the oldest generation of iPad that will still allow me to run IOS8 and allow for future IOS updates?

Buying a used iPad... what is the oldest generation of iPad that will still allow me to run IOS8 and allow for future IOS updates?
Thanks

An iPad 2 will do it...for awhile. Realize that it's seemingly on it's last legs as far as iOS updates go and performance will not be great enough for today's demanding games. Also realize that a big part of running apps smoothly is how much system RAM (the memory area that the apps actually run in) the device has. The iPad 2 has 512 MB which is adequate for most apps but not for some. The iPads above the iPad 2 all have 1 GB of system RAM and the iPad Air 2 has 2 GB.
The time will come when the iPad 2 can no longer be updated past a certain iOS version (as the iPad 1 is) so it will be more difficult to keep up with apps that you want to be using. This will eventually happen to ALL devices so you'll have to judge if you want to be at the tail-end of iOS updates or at least have a bigger buffer with a newer iPad.

Posting run for future period requested (check entry)

Hi,
While taking depreciation run for company code in AFAB system is generating the error message "Posting run for future period requested (check entry)" SAP error AA697
I checked in OB52 postings periods are open for 2009(all periods)
SAP note 1150235 (all corrections) and 1153718 are completely implemented.
Still the problem is not resolved.
Regards,
Sankar

Hi Sankar,
I would like to refer you to the already implemented note 1153718 which states :
After you implement the changes, the system issues error message AA 697
"Posting run for future period requested (check entry)" immediately when
you use a fiscal year that is in the future. In principle, you can
customize this message. However, in this case, no settings are taken
into account; the system always issues an error message.
Regards Bernhard

Posting run for future period requested

Dear Team,
While taking depreciation run for company code in AFAB system is generating the error message "Posting run for future period requested (check entry)" SAP error AA697
please help to reslove the issue.
Regards,
MAhendra

Hi,
look into the Threads,
Can't Run AFAB - Posting run requested for future period
Regards
Andi

Problem: Run Time Evaluation for Future Period

Hi SAP Gurus, can someone help me solving this problem:
My client need to run time evaluation for 2-months period ahead of time. But every time I tried, time evaluation always stops at end of the current month, no further dates in the future. I had created attendance data 2002 for all the future dates. IT7, 2002, 2006 and all configurations seem to be OK (T510S,T569R). Test run is also OK with good future results. What could possibly be missing? Thank you in advance.
Bill

Thank you very much, Arun, Banu, Stefan and Om.
Yes, I have entered the "Evaluation up to" date (60 days later);
The schema has a function "Check FUT".
Test future run result was generated correctly.
Still I can't have future results in real run.
So, what else I should check into?
Thanks again.
Bill

Posting run request for future period; check your entry message no.AA697

Hello Guru's,
I have below error while Depreciation run in T.Code AFAB
"Posting run requested for future period; check your entry" message no.AA697
Request help
thanks in advance
Regards
Chintamani

Hello Chintamani,
Why you want to post the depreciation for future period?
Is the future fiscal year in open or is the posting period open for that? If no, please open that period with AJRW T code if you want to post the depreciation for future period but it is not recommendable.
Check the posting period once again because the given posting period belongs to future year? So please do re-chk and give correct period according to your current fiscal year.
You can get your fiscal year details and assignment of fiscal year variant to the co,code details in OB29 and OB37 t codes respectfully.
Check the OSS Note: 1150235 - Preventing depreciation posting run for future
I hope it helps else revert us with your query.
Thanks & Regards,
Lakshmi S

Whenever my ipod touch runs out of battery it gets disabled for a really long time and won't let me connect to itunes

I dont know what to do!! Right now its disabled for 22,209,010 minutes!! Please Help!!

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons..

I have a G5 and iBook with PowerPC/iTunes 10....just recently I can't bring up the preset Internet radio on either one. Is this a glitch, or have they been permanently disabled for older versions of iTunes?

I have a G5 and iBook with PowerPC/iTunes 10....just recently I can't bring up the preset Internet radio on either one. Is this a glitch, or have they been permanently disabled for older versions of iTunes?

I should have posted this for you a while ago. My apologies for not doing it sooner. This was passed on to me by another user R C-R
He deserves the credit for this workaround. This is his post from an area in the forum where you have to be level 6 or higher in which to participate.
I am getting the same (global) error using iTunes 10.3.1 on a 2008 MacBook running 10.6.8.
A really, really awkward workaround that works for me (for now) is if you have the URL of the Internet radio server you can go to Advanced > Open Stream... (in iTunes 10.x) or type command + U, enter it there & click OK. The station should play fine in 10.x.
You can get the URL from any version of iTunes that still supports the "radio tuning service" (which I gather is an Apple server thing Apple is no longer supporting for 10.x). Play the station normally from the newer version & type command + I to open the info window. At the bottom of the "Summary" tab you will see the URL. (Annoyingly, you can't copy the text so you will have to write it down.)
Once you have that, you can play the station in 10.x & add it to a playlist for future use.
To check this out, maybe try http://198.27.80.37/stream/mbarsott.pls -- it is a European Jazz station that works fine for me with iTunes 10.3.1.
This workaround does work, but is a bit cumbersome. I'm still holding out hope that it is just a glitch.

I'm getting the error message "Photos folder syncing has been disabled for the iPhone my iPhone because the folder "Pictures" cannot be found."

I'm getting the error message "Photos folder syncing has been disabled for the iPhone <my iPhone> because the folder "Pictures" cannot be found." lately.
Normally, all I do with photos is move them from my iPhone to my computer's (Windows 7) hard drive. I do this by connecting the iPhone with the cable, a box pops up on the screen asking me what I want to do, and I choose "Import pictures and videos". I've previously selected the "delete photos from the device after move" option (or however it's worded...), simply because I don't want this device to fill up with photos.
Lately, it has been importing the photos fine, but it won't delete them from the iPhone. This used to work just fine, now it doesn't work and I don't know what changed, if anything. In iTunes, I get the error message I list at the beginning of this message.
How do I fix this?

Hi there scarbo59,
You mentioned that you are still able to import without issues, but you may still want to run through the troubleshooting steps outlined in the article below.
iOS: Unable to import photos to computer
-Griff W.

MRP issue for future delivery PO/STO date

We have a sceanrio where the available material quantity in MRP list is considering future delivery date STO quantity. The PO delivery date is 08.11.2008 and MRP run date is 07.11.2008.
Step 1, material master details:
Material = 16814, MRP Type = PD, Lot size = EX, Special Procurement = D0 (Stock Transfer), Consumption mode = 2 Backward\forward consumption, Fwd Consumption per = 0.
Step 2, MRP list details , before PO creation:
MRP list before having any purchase order = 191-
i.e, Available qty on 07.11.2008 with a DepReq = 191-
Step 3, Creating Purchase oder (In our case it is STO):
We created one Stock Transport Order on 7th Nov 2008 giving Delivery date as 08 Nov 2008 which is in future. Our plant is receiving plant = y100.
PO quantity = 2
Step 4, Running MRP in MD02:
Processing key       =   NETCH               Net Change in Total Horizon
Create purchase req.   = 1                   Purchase requisitions
Delivery schedules   =   3                   Schedule lines
Create MRP list   =      1                   MRP list
Planning mode     =      3                   Delete and recreate planning data
Scheduling         =     1                   Determination of Basic Dates for Pl
Result = PR is getting created for Qty = 189, but our actual required qty = 191 - meaning it is considering the future delivery date(8th Nov 2008) PO qty while creating PR and removing that qty while creating PR's on 7th Nov 2008.
Here we are running the MRP on today (7th Nov 2008). STO delivery date is 8th Nov 2008
Step 5, MRP List details, after STO creation:
Now the PO is coming in MRP list and the available qty is 189-
Earlier stock before purchase order is 191 - after creating purchase order (STO) for future delivery date available qty is coming as 189-
DepReq is still 191- but the total available qty is changing to 189-
We want PR to be created for DepReq of 191 and not 189.

In step 2
What is the stock?
If it is PO then the qty cannot be in minus 189
step3
Where are u running MRP? In receiving plant or sending plant and all the steps you are showing for which plant?
It is confusing...
What i can say is in general if it is MTS scenario, then system will always consideres stock + receipt - issues = 0 after running MRP.
If it is MTO, then for each sales order/project segment stock + receipt - issues = 0...
Hence apply your situation in the plant and see the data.

E71 Feedback and Wish list for future development

Hi Nokia and Nokia Fans.
E71 is a masterpiece but I believe there's much room for improvement. My E71 is indispensable to me. I wish Nokia will strive to thrive the E series and in particular the E71.
Here's my wish list / features to add:
1. A Task Manager for Symbian that's Nokia naively developed is absolutely essential as it's required to manage all aspects of applications, processes and threads, especially the misbehaving ones.
2. Use better GPS Chipset with better sensitivity as the current one is really slackly.
3. High-Speed WiFi connection to access and manage the phone including the mass storage instead of fiddling with wires.
4. Secure zone for creating password-protected notes/memos/etc, previously called "wallet".
5. Add SMS "Listen" feature for sent messages.
6. Add "Timed" Profiles.
My feedback / Issues to fix:
1. "Memory card in use" Error. Despite proper removal of USB connection when using PC Suite or Mass Storage data transfer.
2. Configure to display "Firstname Lastname" format .
3. Configure Date display to American format (Wednesday December 03 2008).
4. Save current "configurations and user preferences" for future deployment after firmware upgrade or maintenance routine.
5. When receiving a Bluetooth message with (.sis or .sisx) attachment, provide save to memory card option rather than launching installtion process.
6. Setting up "WPA2 Only" mode on WLAN Security Settings for a particular Access Point will not allow communication despite the access point router/gateway is configured to work on this particular mode.
7. Camera is another isssue. Fix color fidelity and picture clarity issues.
Thanks
.......To be revised as needed.

Nice wishlist, willing to front up the extra cash to have these features? Got to remember that until these feature become more common they will stay as premium items and that you need to pay the extra money or move to a higher priced plan for them. Getting something like device locks would be great though but then what would device locks do for a customer base? and they do have the data encryption built in....
I would like to see a 16:9 aspect ratio in the next version of the phone myself. A holster pouch w/ belt clip rather than looking for and buying an ill fitting pouch cos I really don't like the pouch it comes with and cant find a nice one. The ability to have more than just the plain 6 applications on the screen, it used to scroll if I remember correctly in the older ones. The ability to skip music tracks when pressing volume up or down. 3.5mm audio jack. Time and date or at least time shown on the top strip of the display when going through the menu (there are a number of time I want to know the time and have to program juggle to find out what it is. More symbols on the other keys rather than just on the right hand side, I do have 2 thumbs available to use and fairly dexterous with either hand.
Less "download - **bleep**" in the web menu it takes me to a link with useless stuff on it.....
That GPS chip needs to be replaced, it has me walking down the road or in my neighbours house when I'm just lying in my lounge.
This wish is for all Nokia Symbian devices, I would love to see a Nokia App store. I'm sure it'll come around once they get the symbian foundation off the ground but i'm impatient and a lil lazy and haven't always got the time to find an application for something I have thought up. Blackberry and Apple have got something of a centralised store up and running, C'mon Nokia! Get a move on!
Nokia E71-1 (254.03)
110.07.127
RM-346

AMD GPU fan runs constantly even after disabling DGPU

I have a HP-Pavilion dv6 6121TX, with AMD 6770m gpu.
The fan of the gpu runs constantly even after disabling it using the following command
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
the output for "cat /sys/kernel/debug/vgaswitcheroo/switch" is as follows
0:DIS: :Off:0000:01:00.0
1:IGD:+:Pwr:0000:00:02.0
It shows that the DGPU is off and yet the fan for the same runs continuously at full speed.
Would be really grateful for any suggestions.
Thank you.

You might also try a different battery if you have access to one. Unfortunately, many of the replacement batteries being shipped by Apple are defective. They don't fit properly into the battery bay. I suspect that if the quality control is this poor, then it seems likely that other problems will arrise as well. Check carefully that the battery itself is not overheating. Another possibility which also happened to me is that after installing the last upgrade to the operating system, one or more of the third party widgets became problematic, causing the same problem you describe. After removing all third party widgets, the problem stopped. Good Luck

Forecast run MP30 be to disabled for future

Similar Messages

Maybe you are looking for