Forecasting: all historical values are zero

Hello,
I would like to execute forecast for a specific material.
Then I'm in MM02 in forecasting view, I filled all necessary parameters and I press "execute forecasts".
I received different pop ups, and one is "Between 11.2006 and 10.2011 all historical values are zero".
If I go out of this, and press on "Consumption vals", I have no data for unplanned consumption but if I click on "Total consumption", I got all values for each period of my historical periods.
So why do I have this message that historical values are zero? Then I have no chance to execute forecast with that behavior.
Same with several other materials.
Thanks for help.

Dear Olivia,
In MM of forecasting view there is filed Hist. periods which you could have probably maintain more than 12 months say 60. So starting from current months it will go backward & search value for last 60 months. In your case it is not finding any past values. Have you maintain it in Additional data of material master Consumption tab ? Maintain some values for months & then try
Regards
Abhijit Gautam

Similar Messages

All excise values are ZERO in Purchase order

Hello
We are using tax procedure TAXINJ procedure for Tax calculation.
Created the Purchase order for a material, entered the tax code in invoice tab system will not shown BED(JM01 condition) ECESS and SECESS values.
we have checked the Material and chapter id combination is correct available and Vendor excise details, here also vendor is excisable. checked the excise indicator for plant. plant also excisable.
maintained the excise tax rate infront of chapter id in J1ID....
But still PO is not showing any tax values in PO, all the values it is showing is ZERO.
Do the needful.
Regards
Sapman man

Dear,
        Kindly check your VALIDITY PERIOD for ECXISE MASTER RECORDS in J1ID and check whether it is before P.O. date or not.
        If it is OK then there is some problem in MASTER RECORD MAINTAINANCE for that do check following Master data are
        maintained or not...
        1) chapter id
        2) material and chapter id combnation
        3)CENVET determination
        4) Vendor exsie detail
        5) Excise indicator for PLANT
        6) Excise tax rate
         u must have left some MASTER RECORD.
        Kindly see the warning messege coming just after u tick ITEM BOX mentioned below.
Regards
AJIT K SINGH
HAPPY TO HELP U
Edited by: AJIT K SINGH on Dec 2, 2009 10:46 AM

Conditional suppress only if all column values are zero

I would like to suppress whole column if dbfield value is 0.00. I was able to suppress it in common tab of format field by using formula if dbfield =0.00 then true else false.
But i would like to suppress column value only when all the values in column are equal to 0.00. Otherwise I would like to retain those 0.00.
Let me know how I can do this?
Your response is appreciated
-Thanks
Raghu

Go to "Format Field...", select the Common tab, and put something like the following in the Suppress formula.
Maximum({dbField}) = 0

How to hide rows if all values are Zero (0) horizontally?

Hi,
I have got a requirement to hide rows from the results if all values are equal to zero horizontally.
Example:
Region   M1    M2   M3
East     0      0    3
West    10     20    0
South   -5      0    5
North    0      0    0In the above example only North Region row should be hidden from the results becasue all the measures values are zero.
Can someone please let me know the logic to achieve this?
Thank in advance.

Hi Karthik,
Your answer was spot on(you are awarded points) but not my question. My client uses some X erp, which removes all zero value records when he clicks to see results. He wanted the same thing for Answers (he does not want to add any filters). Is there anyway to achive that, like using javascript or something?
Thanks in advance.

How to not to display any line items for val flds values are zero in KE30?

Dear All,
In KE30,in one of my reports, i do not want to display such line items for which all values are zero for all val flds, it should only display the line items for which there is any value, i have tried Zeros hide in KE35 in formatting menu>other format>hide zeros, but unofrtunately it didnt came out.
Regards
Rashid
Edited by: rashinuet on Feb 20, 2012 4:38 PM

Dear Abhishek,
I have tried that as well in ke35 and made this option activated on my val flds like sales revenue for hide zero values, but it didnt came out as well, then in i tried ke32 change report >Extras menu>form settings, this adopts all the settings in the report from the form you have assigned, but this is not working, i am failed to understand what has gone wrong.
Regards

Tcode DB02 all the values showing zero (0)

Hi Oracle-experts!
I have recently executed the upgrade from 4.6C to ECC 6.0.
I have the following errors after that:
<b>Tcode DB02: by entering the Tcode all the values are showing the zero (0).</b>If I try to refresh the values the background job "space statistic:Default" is starting and canceling after while with "SAPOSCOL short dump" (compute bcd overflow).
<b>Also I have a lot of red messages in TCode dbacockpit.
How can I fix them? </b>
Thank you very much
regards
Axel

Die Table ORA_MON_DBCON should contain at least the local database.
e.g.
CON NAME       DEFAULT
STATUS         A
MAX RUNTIME    1.800
MAX UPLOAD     1.000.000
LOG LIFE       100
DESCRIPTION    Local Oracle database
Check all points in the SAP Note 1002840 - No data or obsolete data in DB Space Statistic monitor. This note is very important for this problem.
Best regards
K.Baran

PCA Values are Zero in KEAT

Dear Experts,
I am using New GL Profit Centers. In KEAT activity all values are comparing properly I mean COPA to SD to FI. But PCA values are showing Zero values... I had checked in FI level all values are flowing to PCA properly through Document Splitting.
How can I get PCA values in KEAT.
Regards,
Balalji Bhonsle.

Hi Balaji
KEAT shows EC-PCA values as far as I know... If you are using New GL PCA and have inactive EC-PCA, those values are not applicable to you
If COPA to SD to FI are OK, then you should be satisfied
Regards
Ajay M

To verify all the values are properly transferred from source db to target db which command works better?

Hi,
i need to validate all the source values are transferred properly from source db to target db .but i confused which is the right command to use between except & exists.
if 100 records in source then i need to validate all the 100 records should be there in target db.
i used below queries:
using exists:
Select upc_desc from DBO.MIC_TARGET
t1
where not exists
Select 1 from produ_stg
where DESCRi3= t1.UPc_desc
using except:
SELECT descri3 from produ_stg
except
select Upc_desc from MIC_Target.
please help me which query is correct to validate source and target db values are same replica.
Regards,
Jagadeesh

You can use EXCEPT here.
NULL will not consider in NOT EXISTS whereas EXCEPT takes care of the same.(Except is nothing but Distinct and then Not exists)

Forecasting using historical values

I am doing forecasting for a material. I have created the forecasting view for the material and entered the consulption values. I want the forecasting output to create a forecast where the current month' s forecast = the same month's historical sales last year. When I try to execute the forecast the 'forecast execution' tab has the 'historical' as greyed out. Is there a way I can copy historical values as forecast.
thanks

Hi John,
As per my understanding you want that that the sales for month jan-2008 = forecast for jan-2009.
If that is the requirement then you can maintain the following setting.
Model = D constant
Period indicator = M
histroy period = 12
Forecast period = 12
Maintain the Consumption for the whole year 2007.
Regrads
Kaushik

CRM to BW extract - All Duration amounts are zero using 0CRM_SALES_ACT_1

Hello,
We are implementing the "CRM 4.0 Interaction Center with Winclient" and are using BW 3.1 for reporting. The problem we are encountering is we are getting "DURATION" and "Face to Face Duration" amounts that are ZERO when extracting call center activity data using the data source 0CRM_SALES_ACT_1. This data source feeds into the ODS 0SAL_DS01. We are expecting the "Duration" amounts to be non-zero and represent the time the call center agent worked on a particular activity. The data we are testing with has been entered manually and we are not yet connected using telephony server (so we cannot use the CTI data yet).
Any help regarding how I might solve this problem would greatly be appreciated. Possibly this is a CRM configuration issue but don't know.
Thanks and Regards,
David Schroeder
John Deere
(309)748-1724

Hi Silvio,
I've experienced a similar problem with this extractor. I attempted to Initialize Delta with Data Transfer to no avail. The job ran for 12+ hours and stayed in "yellow" status (0 records extracted). The following steps worked for me:
1. Initialize Delta without Data Transfer
2. Run Delta Update
3. Run Full Update and Indicate Request as Repair Request
Worked like a champ, data load finished in less than 2 minutes.
Hopefully this will help.
Regards.
Jason

SQL function to retrieve records only if all the values are available.

Hi,
I have a sales table on which i run a parameterized query.
We pass a few week IDs to retrieve store sales.
I need to retrieve only those stores that has sales in all the week IDs passed.
If i use the in operator, i am getting the store data even if there is sales for only one week.
Is there a function in oracle to do this?
Thanks,
Sharan.

Hi, Sharan,
Here's how you could use the analytic COUNT function:
WITH     got_week_cnt     AS
     select week_id, store_id, prod_desc, sales_units_raw, sales_value_raw
     ,     COUNT (DISTINCT week_id) OVER (PARTITION BY store_id)            AS week_cnt
     from     sales_store_dwh
     where      week_id in (&&Week_ID_CSV)
select week_id, store_id, prod_desc, sales_units_raw, sales_value_raw
FROM     got_week_cnt
WHERE     week_cnt = 1 + LENGTH ('&&Week_ID_CSV')
                - LENGTH (REPLACE ('&&Week_ID_CSV', ','))
;Notice that the sub-query got_week_cnt is just your original query, with the COUNT function added.
You didn't post your tables or results, so I can't test it.
You didn't say what version you're using, so I made a conservative guess (Oracle 9 or higher). In Oracle 11, there's a simpler way to find the number of weeks passed.

Planning layout - If all KFs are Zero in Actual Cube

I have created two cubes, actuals and planning cubes. Created a planning layout in Multi planning area.
In the layout settings, i have selected , select from transactional Data option.
There are lot of entries in Actuals cube, for which all the Key figure values are zero.
However, i would like to show records also in the layout, so that users can enter the plan values.
Lets say, if the last year sales are zero ( from actual cube), still users would like to do the planning for future.
Is there any workaround to display those records from actuals cube for which all the key figure values are zero ?

I know, where to make the setting. Since we have 200000 products and 5000 customers, we would not want to select all possible combinations.
I would be interested writing a FOX formula ( 2nd part of Andrey's solution).
Anyway, i have figured out the workaround. I have just increased the number of decimal places in one KF. If all the KFs are Zero, in the cube transformation, i am changing the zero to 0,0001.
In the layout, i am displaying only 2 decimals.
It is working as expected.
Thanks a lot.....

Invoice Printed with J1IP showing all acessable,bed sed zero

Hi, gurus
In one invoice preview with J1IP is show all values zero, but in VF03 or in sales order all the values are showing correctly, could any please give some suggession..what is wrong in this invoice.
Thanx!
Regards,
Rizwan

Hi, gurus
In one invoice preview with J1IP is show all values zero, but in VF03 or in sales order all the values are showing correctly, could any please give some suggession..what is wrong in this invoice.
Thanx!
Regards,
Rizwan

BEx Analyzer: Display values with Zero data

Hi,
I urgently need to know something about BEx QD/Analyzer:
If I drilldown e.g. Customer into the rows, it only shows me those customers for which there are values in place. However, I need to see all Customers, i.e. also the ones where the values are zero.
How can I do this in Bex Analyzer or if needed BEx QD.
Thanks
Sabine

Thanks,
but it won't be possible to create a multiprovider just for that.
Maybe I wasn't clear enough
If a have Customer A, Cust B and Cust C and I drilldown by customer in the rows, then the system only shows me Cust B and Cust C, because for a there has been e.g. no turnover in one specific month.
But in the drilldown in the report, I still want to see Cust A as well, even though the value is zero. So I should just see an empty line (instead of the key figures for Cust A).
Guys, that must be possible!! Help me
Sabine

Crystal Report 2011 does not display when keyfigures are zero

I am using Crystal report 2011 with BEX Queries as Data Source. I am not able to see some of the characteristics values when keyfigures are zero or null. In BEX query there is a costCenter Characterstic, few costcenter characteristics values are zero for some months but BEX Query is designed to show as spaces even if the keyfigures are zero for those costcenters. When I am using the same Bex Query with Crystal report 2011 all the costcenters with keyfigures as zero are not showing up on the report. Can anybody suggest how I can show the characterstics values even if all the keyfigures are zero. (I have not selected any kind of suppression in section expert in crystal report), (In Bex Query CostCenter- Properties-Advanced----Access Type for Result values are set to Master Data)

Hi,
Have you made sure the correct Transport files have been loaded on the SAP system? Since you're using CR 2011, you need to make sure the Transports that come with this version of CR are present on the SAP system.
Could you see if the workaround mentioned in SAP Note: 1391673 works for you?
Here's a snippet of the SAP Note:
SAP Development team of BW BEX MDX Interface suggest the following implementation:
Since Crystal Reports is not correctly interpreting the character used to represent NULL values (by default the value: X) please use the Customizing transaction: RSCUSTV4 to change the sent value.
Please note, this is a Global setting, and will also modify the behaviour in BEx application.
WORKAROUND: Create a formula field based on the selection that always returns a number - converting null to 0.
Create a formula in BEx for the KF.
Edit the Selection
Edit the formula to behave like:
COUNT ('KF') * 'KF' + 0
('RKF' + 0) * 1
Not generally acceptable since it requires duplicating fields.
Also, business may not accept 0,00 for a NULL result.
Hope this helps!
-Abhilash

Forecasting: all historical values are zero

Similar Messages

Maybe you are looking for