Forefox is not printing using the specified margins.

Page setup margins are specified as .5 inch width. Page is printing with an effective .88 inch margin. That throws off the formatting causing the document (an invoice generated by our web based software) to print incorrectly. The print preview on our site/software is correct. The document prints fine with IE, but not Firefox. I've cleared cache and cookies, restarted system, etc.

Hi,
Which device type do you use to create the spool and print? Do you use one of the device types listed in the SAP note #1173046 like device type YZB200?
Or do you use the workaround method to design the label using a third party software like BAR-ONE , upload the created label file to a sapscript form and print via device type LB_ZEB?
One of these methods should work fine to print the barcode.
Regards,
Aidan

Similar Messages

  • Firefox 3.6.9 / Windows 7 will not print using font specified with @font-face - any workarounds?

    I've seen a few mentions of this problem around the interwebs, but can't find a resolution. I used [http://www.fontsquirrel.com/fontface/generator fontsquirrel's font-face generator] to prepare different versions of a font for cross-browser display. Screen presentation in almost all browsers is fine, and almost all browsers print the embedded font as well - except for Firefox/PC (3.6.9/Windows 7).
    I have tried inline styles, styles inside of the head, and external stylesheets, all with and without media type print. What can I do?

    Hi John,
    Can u try the work around mentioned in the below link
    http://notsomany.wordpress.com/2010/03/30/jinitiator-working-on-windows-7/
    Also some times IE8 can block the webutil_file_transfer.
    AS_to_Client if "protected mode" is ON for the security zone your forms url is in (look in the statusbar in IE ->
    internet, trusted site, ... -> protected mode: On/Off)
    Regards
    Fabian

  • I am using OS X and am trying to set up a HP ENVY 5660 e printer and the drivers are not listed.  I read somewhere not to use the install disk.  What do I do?

    I am using OS X and am trying to set up a HP ENVY 5660 e printer and the drivers are not listed.  I read somewhere not to use the install disk.  What do I do?

    Your suggestion was a good one and what I found was that to use this and any other printer I looked at is that I need to update the operating system to a later version.  I have been reluctant in the past to do this after reading update horror stories and since this computer does what I need and very well.  Was glad I moved over from windows and this is the first problem I have had.  Thanks for your help and any other suggestions you may have.

  • I can't print from firefox. The paper feeds throught the printer but does not print. The same web pages will print when I use internet explorer. And the printer works fine with word, excell etc, just not with firefox.

    Whenever I try to print any page opened in firefox it will not print. The paper feeds through the computer, but does not pring.

    See this: <br />
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Posting is not possible for the specified company code.

    Hi SRM Gurus,
      We have a four company codes in our org.structure and if we try to post manual invoice for a particular company code with its currency, we are getting this error :
    "Posting is not possible for the specified company code "
    We have all company codes defined and inherited for the particular user in BUK and we get all the company codes in the F4 help of this user in BBPIV02 -->Basic data.
    Any suggestions pl.
    I doubt this particular Cocode is deactivated for invoice posting in backend. Is it possible ?
    Kindly suggest.
    Reg.,
    Sridhar.

    Hi
    Which SRM version are you using ?
    Are you getting this error for a praticular company code only or for all the comapny codes ?
    <b>Please read this -></b>
    Since you are trying to create Invoice with PO did you check the Vendor Root there is a attribute for company code. Please maintain the same, if not maintained.
    Refer the link below for details.
    Re: Company code for system missing in user attributes
    <u>Other related links -></u>
    Try to change the chart of acct info in OBY6 for a company code that was copied from SAP template, there is no Financial posting or any other posting in this company code.
    Re: Posting Period Error in Confirmation
    Hope this will help.
    Regards
    - Atul

  • My new Officejet Pro 8500a on a Windows XP machine will not print from the Internet.

    I just purchased and installed an Officejet Pro 8500a all-in-one and everything seems to work fine except that the maachine will not print from the internet.  I use Windows XP home and and the Firefox browser.  The printer is connected directly to the computer, and is not directly connected to the Internet or any other network.

    The Officejet 8500 printers take individual ink cartridges (IIC); that machine requires that all cartridges be installed to ensure that the printhead does not get damaged. Ink is used in the printer not just for printing, but maintain the printer and the printhead. One can reduce the amount of color ink the printer uses by changing the printer settings to Grayscale or use black ink only. Page 34 of the user manual shows how one can change those settings when printing documents. For further information on how ink is used in the printer; one can look as this page here where it goes into detail on the different ways that ink is used in the printer.
    I would just replace the color cartridge that the printer indicates needs replacing when the machine alerts you to low ink. I would not replace all colors at once when only one is in need of replacing.  
    I hope that this helps.
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Printing using the built-in print drivers launches a PowerPC App.

    According to CNET: "Canon, Epson, and HP have all also announced that full universal binary drivers for their Apple peripherals will come with the iMac Core Duo as part of OS X 10.4."
    So one would think that if you use said drivers printing would not require Rosetta. Alas - it does.
    When I print using the built in drivers which are supposed to be Intel native I have noticed that PrintJobMgr is launched as a PowerPC application (I have been watching it in Activity Monitor). PrintJobMgr is Universal, so is lp and so is the App that gets created when you install the printer.
    Is anyone else experiencing this? Any thoughts? The driver that it is supposed to be using is the built in HP InkJet 2.7.1.

    I didn't migrate from my powerbook - I only copied over a couple select files by hand (I rsync'd my iPhoto and iTunes and copied over my mail and documents).
    I am fairly sure that I have the original HP (and supposedly Universal) drivers and I was aware of the migration bug. That is why I am concerned.
    If you are using the built in drivers, print something while watching Activity Monitor. Does PrintJobMgr show up as Intel or PowerPC?
    The printer in question is an HP 6840.

  • Why doesn't printing use the default printer?

    I have two main printers to use at home and whenever I print a web page, Firefox automatically prints using the non-default printer. If I select the default printer from the drop down list, it works fine. I shouldn't have to select the default printer every time I want to print.

    Note that NONE of the replies answer the original question.
    The key word in the question is "'''Why'''" and "default printer" refers to the system's default printer.
    Why does Firefox behave differently than any other Win app when it comes to printing, ALWAYS use the system's default printer UNLESS the user changes it (''and NOT memorize the choice'').
    To put it another way, '''Firefox should NOT always use the last printer selected'''.
    '''This non-standard printing behavior should be changed.'''

  • Shared Services database content not found in the specified database - EPM

    I installed three VM machines (Workstation) for the following on Windows 2003 OS:
    VM1 : Oragle DB 11g, Shared Services. Workspace
    VM2 : Financial Management, EPMA, Calc Manager
    VM3 : Microsoft Active Directory
    I have configured Database and Shared services successfully and all machines talk to one another.
    Also, I created the appropriate table spaces for the Hyperion products with the right access on the database. And, I am able to connect from the client (VM 2 to the Database VM 1)using SQLplus.
    When I tried to configure Financial Management, using the EPM System Configurator and put in the following values:
    Database Type: Oracle
    Server: VMDatabase (Name of VM1)
    Port: 1521
    SID ORCL
    Username: HFM
    password: *********
    It returned the error message: "*Shared Services database content not found in the specified database*"
    Can someone please help on what I need to check, Please!?
    Thanks for your time.
    K

    Hi,
    Information from Oracle Support:
    Shared Services database content not found in specified database
    Cause
    There is a flag in the shared services repository that indicates the shared services database is to be used as a registry. If that flag is not set, the configtool will not re-configure the database as a shared services repository.
    Solution
    Note: Make sure the Shared Services repository is backed up before doing any Shared Services Registry changes.
    The registry flag isRegistryDB must exist and be set to true on the Shared Services Database Connection.
    epmsys_registry.bat VIEW DATABASE_CONN
    Find the shared services database registry entry. The entry in bold will be missing. The italicized item is the 'unique_id' referenced later (different in each installation).
    COMPONENT - 3
    NAME - Database:ORCL:HSS
    ID - +11d1def534ea1be07ad8eb3012d2e3d310a7ff4+
    TYPE - DATABASE_CONN
    HOST - Database
    HYPERION HOME - /home/hypadmin/Oracle/Middleware/EPMSystem11R1
    PROPERTIES -
    isRegistryDB = true
    dbUserName = HSS
    dbJDBCDriverProperty = oracle.jdbc.OracleDriver
    dbJdbcUrl = jdbc:oracle:thin:@Database:1521:ORCL
    registryDatasource = EPMSystemRegistry
    registryDatasourceJNDI = jdbc/EPMSystemRegistry
    dbName = ORCL
    version = 9.5.0.0
    dbPort = 1521
    instance_home = /home/hypadmin/Oracle/Middleware/user_projects/epmsystem1
    dbPassword = GABaMyyplja+wLNCmLs8ag==
    Run the following update to populate the isRegistryDB flag with the unique_id being the ID field used in the DATABASE_CONN registry entry.
    epmsys_registry.bat addproperty #unique_id/@isRegistryDB true
    Repeat the epmsys_registry VIEW DATABASE_CONN to make sure the flag is now set.
    You will be able to reconfigure the shared services repository.
    You can mark it as Answer/Helpful if you feel so.
    Cheers!
    J

  • Can not Printing using Adobe Reader V9.0, OS is  Windows Vista

    Help Me Please! I can not print in Adobe Reader. This is what is happening: I select print, the status bar shows pages being sent to the printer, the printer Hicups, clicks, clangs, clunks, and Burps and nothing comes out; No error, No copy. I'm running V9.0 but the same thing happened in version 8. I thought it was something to do with the down-load. What gives?

    Sorry for disappearing; gotta make a livin'
    No, I haven't looked for an updated driver for my printer but I will give that a try. I was able to print using the "print as image" function but it really bogged my system down to pre-Pentium days. I'll let you know if the driver update works. Thanks for reaching out!

  • My HP Officejet 7500 E910 will not print in the center of the page.

    Trying to print from AutoCad on 17 x 11 A3 paper, the print is in the upper left corner and I'm not sure which program is at fault. AutoCad seems to understand the print needs to be offset, but the printer isn't in agreement.
    This question was solved.
    View Solution.

    You could try uninstalling and reinstalling the printer using the latest driver from HP. If that doesn't work, you might try using a different driver. I'll link the instructions and the download below.
    HP Officejet Full Feature Software and Driver:
    http://goo.gl/Hxmdg
    How to Assign Alternate Print Drivers in Different Versions of Windows:
    http://goo.gl/zCk2r
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • CWSerial/CWGPIB on Win7 :"The subject is not trusted for the specified action"

    Hello,
    I'm currently trying to migrate a VBA software from WinXP + Excel2000 to Win7 + Excel2010 and I'm encountering a big problem. The software is using activeX control such as CWSerial and CWGPIB but when I'm trying to add them I get the following error "The subject is not trusted for the specified action".
    I'm more or less certain it's a permission problem, I just can't figure out how to solve it. I'm also pretty sure it's not a VBA version problem because I tried to do the same manipulation on a Win7 + Excel2000 machine and got the same error, so it must be related to the OS.
    What I have already tried:
    Regsvr32 on cwinstr.ocx.
    Downgrading the Microsoft Office version to 2000 again.
    Set Excel's Trust Center to enable all controls without restriction.
    Fiddle with the registry keys following instructions on internet for similar problems.
    Re-install everything on a new machine.
    Did anybody face the same problem and/or has a solution? I'm working on a Virtual Machine so I can test every idea without fearing data loss.
    Thank you for your help!

    The only way to know what is going on is to retrieve the certificate and check who is the issuer.<br />
    It is always possible that the server doesn't send the full certificate chain (intermediate certificates), so it might help to post a link to this website
    Check the date and time in the clock on your computer: (double) click the clock icon on the Windows Taskbar.
    Check out why the site is untrusted and click "Technical Details to expand this section.<br>If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
    You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
    *Click the link at the bottom of the error page: "I Understand the Risks"
    Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
    *Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
    You can see more Details like intermediate certificates that are used in the Details pane.
    If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
    *Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.
    *Note that it is not recommended to add a permanent exception in cases like this, so only use it to inspect the certificate.

  • "A valid repository does not exist at the specified connection" when connecting

    Hi all,
    I'm using ODI 11g and Oracle Database 11g EE.
    I've installed ODI without any errors, and chose to skip repository configuration during installation.
    I created the Master and Work Repositories with the RCU that was provided in the same media pack as the ODI installation files.
    After starting ODI, clicking "Connect To Repository..." and inputting the correct credentials I get the following error:
    A valid repository does not exist at the specified connection...
    http://pastie.org/pastes/8081847/text?key=grna09suyra4w0vgitbxiw
    Has anyone had this error before, can anyone help?
    Thanks!
    Josh.

    Josh,
    Looks like the RCU did not create the repository in the intended schema for some reason. you can check the schema for the ODI tables (SNP_*) presence.

  • C4780 does not print off the internet

    Since I upgraded to Windows 7 (64 bit HP laptop), the printer will not print off the internet. All other printing jobs work fine. I have uninstalled and reinstalled several times to no avail. I have also downloaded and installed the latest patch for computers that have upgraded to Windows 7. I have spent several hours with HP support both on the phone and online and they have been unable to solve this problem. Does anyone know what to do to fix this?

    Hi,
    are there any error messages displaying on the front panel display or on your PC screen?
    what are you trying to print i.e.. are you printing from your PC or are you trying to print using the ePrint service (print apps direct from the front panel or sending an email to your printers email address)
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • The embedded controller (EC) did not respond within the specified timeout period - Flex 15D

    Hello,
    I have an IdeaPad Flex 15D, and I have had several problems (mostly processor-related) in the time I have been using it. I contacted Customer Support twice, and finally did a system reset a few days ago after being told by Lenovo Support that my choices for fixing the problem were 1) Reset, or 2) Pay for a premium service to diagnose the problem. Needless to say (again), I went with option 1. So far I have not had any noticible problems with the processors, but there is a certain error showing up in the Event Viewer that I am concerned about. Lenovo Support has been next-to-useless troubleshooting my problems thus far, so I'm taking them here. The error is as follows:
    (Event ID 13)
    The embedded controller (EC) did not respond within the specified timeout period. This may indicate that there is an error in the EC hardware or firmware or that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
    Sounds like the BIOS needs an update, right? Well, I went straight to the Flex 15D drivers page, and guess what? I quote the drivers page: Bios update is not required for this product. Not required? So, Lenovo ships a broken BIOS and then refuses to support it? I don't know if Lenovo employees ever read this forum, so this might not be the best way to get their attention, but I am so fed up with Customer Support and I want this issue to be known to more than just a few unhelpful 'tech support' people. The Flex 15D isn't one of the more popular laptops out there, so I can't expect anyone reading this to be able to duplicate this problem or really provide any support, but if you have any suggestions whatsover, please reply to this thread. Like I said, I want people to know, and hopefully we can get Lenovo's attention so they can fix this problem.
    Best regards,
    Owen Dugmore

    Hi,
    I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
    For more information, please refer to this site:
    Search error: crawler could not connect to the repository:
    http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

Maybe you are looking for