Forefront for Exchange Server is not blocking emails by IP

I have 3 Servers for Exchange: Client, Mailbox, and Edge.
I have Antispam configured on my Edge server with IP Block list enabled but I am getting numerous emails from China's IP block even though I blocked all of the .cn network.
The following is entered in my IP Block list for .cn:
59.56.0.0-59.61.255.255
183.0.0.0-183.63.255.255
I confirmed server is up to date on patches, etc.
Exchange Version on all Servers:
14.03.0174.001
Forefront Version on all Servers:
11.0.713.0
However when looking at Help>About MS Forefront Protection the Exchange Version does not match...
Exchange Version Reported in Forefront
Mailbox: Exchange Version 14.03.0174.001
Client: Exchange Version 14.3.123.4
Edge: Exchange Version 14.3.123.4
Not sure if this is going to be an issue but wanted to make note of it.

no way for checking emails which use a proxy like https page to acces???
with this nice business!! phone???

Similar Messages

  • Forefront for Exchange Server

    Before upgrading to Exchange Server 2013 we were using Exchange Server 2010 with Forefront Protection 2010 for Exchange Server to protect our system from virus/ malware, it works effectively. After upgrading to Exchange Server 2013, the forefront Protection
    2010 does not support Exchange 2013. I know that MS added anti malware function to Exchange Server 2013 but it does not work effectively.
    So the question is: does MS has any other program instead of Forefront Protection 2010 which support Exchange Server 2013.

    Hi,
    You could have a look at Exchange Online Protection that hosted email filtering service.
    http://technet.microsoft.com/en-us/library/jj723137(v=exchg.150).aspx
    Best Regads,
    Joyce

  • Exchange Server 2013 not receiving emails

    I have a new Exchange 2013 mail server installation (no migration - completely new domain and everything).  For some reason the server is not accepting mail from the Internet.  My router is indicating it is forwarding SMTP packets to the Exchange
    server's IP address, but nothing shows up in the message queues or users mailboxes.  The event viewer is giving me no clues.  No errors.  This is a simple installation - one Server 2012 DC and the Exchange server.  One Exchange server in
    a domain environment.  The receive connector looks correct.  It is using port 25 and I indicated to use the IP address of the Exchange server network card.  Any ideas as to how to configure the receive connector?  Thanks!

    Greylisted  is an anti spam check done on exchange. However to me this would meanone of two things.
    1: The inbound email domain is listed not your exchange server. Your Exchange server seems to be set up to only allow inbound mail from specific domains perhaps instead of * (All).
    2: More likely i think is that your domain is not set up in Exchange.
    In order to test the product you probably want to create your own domain, and that is easily done in the Exchange Admin Center by clicking the Mail Flow item
    and then Accepted Domains in the tab area and finally the Add… icon, <o:p></o:p>
    Type in the information and click Save,
    the new domain will show up on the List View.<o:p></o:p>
    For reference you can check if your domain is blacklisted here: http://mxtoolbox.com/blacklists.aspx but i am sure this is not your issue.
    Martin

  • Expiration of "Subscription license of Microsoft Forefront Protection for Exchange Server"

    We have "Microsoft Forefront Protection for Exchange
    Server" running in the company. Now I face the expiration of "Subscription license of Microsoft Forefront Protection for Exchange Server".
    I learned from
    http://blogs.technet.com/b/server-cloud/archive/2012/09/12/important-changes-to-forefront-product-roadmaps.aspx that "... products will continue to be supported through that date (12/31/2015) in order to provide with customers sufficient
    time to move to alternative solutions". My concern is, that Microsoft Forefront Protection for Exchange Server does not know about that grace period.
    It claims:
    Your Subscription license of Microsoft Forefront Protection for Exchange Server has expired. The product will continue to operate during the extended grace period
    until 5/1/2013. Subsequently, scanner updates will be disabled and the product will operate with reduced functionality.
    Is there a way to get a new license number? I called our software vendor, but Microsoft does not sell licenses anymore.
    Thank you for your assistance.

    Hi
       We just talk about exchange deployment and configuration in this forum.
       If you have any questions about licensing, please use the contact information in
    here which would be the best place for seeking the answer.
    Terence Yu
    TechNet Community Support

  • Half the engines are not updating wanted to update Forefront Protection 2010 for Exchange Server to newest sevice pack

    Running forefront protection 2010 for exchange. The version of Exchange we are running is Exchange Server 2007 sp3 rollup 13. I am seeing that half our engines are not updating for forefront. Currently we are running version 10.1.0746 sp1 for Forefront.
    I would like to get this up to the newest version which I think is SP2. Where can I download just the service pack 2 and will I have any problem with the version of exchange I am running. Thanks in advance for any help.
    John

    Hi,
    I guess you are talking about Microsoft Forefront Security for Exchange Server.
    You could have a look on the following blog.
    http://blogs.technet.com/b/fss/archive/2009/12/10/migrating-from-forefront-security-for-exchange-server-to-forefront-protection-2010-for-exchange-server.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Renewal of Forefront Protection 2010 for Exchange Server until EOL

    Hello,
    We have a Open Value subscription for Forefront Protection for Exchange Server 2010 (FPE) running with an Exchange 2007 server and an Edge Server.  We attempted to renew the subscription to FPE and were automatically upgraded to FOPE and now EOP.
    Since FPE is not End of Life yet, might it be possible to renew FPE on premises until such time as the product goes End of Life? 
    thank you,
    Dan

    Hello,
    FPE on premises was available only as a subscription license in OV, OVS. for subscription products thre is not possibility to renew th elicensing if is removed from product list.
    you can purchase FOPE(in OVS) or EOP as online subscription. you can use also EOP for on premises Exchnage Server.
    on Microsoft document we have th efollowing info:
    The following are the primary ways you can use EOP for messaging protection:
    In a standalone scenario   EOP provides cloud-based email protection for your "on-premises Microsoft Exchange Server 2013 environment, legacy Exchange Server versions,
    or for any other on-premises SMTP email solution."
    As a part of Microsoft Exchange Online   By default, EOP protects Microsoft Exchange Online cloud-hosted mailboxes.
    In a hybrid deployment   EOP can be configured to protect your messaging environment and control mail routing when you have a mix of on-premises and cloud mailboxes.
    note: EOP replaces Microsoft Forefront Online Protection for Exchange (FOPE). All FOPE customers will be transitioned to EOP, as described in the
    Forefront Online Protection for Exchange (FOPE) transition center. EOP delivers the protection and control provided by FOPE, and also includes additional features.
    What's new in Exchange Online Protection describes some of these features.
    thanks
    diramoh

  • Microsoft Forefront Protection 2010 for Exchange Server - where to look in GUI

    Hi there!
    We have configured Forefront for Exchange on Edge server.
    We have created a test subject filter and sent a test mail.
    On the Administrator Console under dashboards we see that message was blocked due to spam, but we cannot find in GUI some briefer details regarding this blocked message.
    How can we see in this administration console GUI which exactly message has been blocked?
    Having just dashboards and not being able to open and check every blocked message is a problem.
    Please advice
    With best regards
    bostjanc

    I posted a PowerShell-based workaround in the other thread:
    https://social.technet.microsoft.com/Forums/forefront/en-US/1ccb9a5e-4b08-4f6b-a4bd-32cf5f2cd2b0/cannot-save-any-changes-microsoft-forefront-2010-for-exchange-is-unable-to-perform-the-requested?forum=FSENext
    Mike Crowley | MVP
    My Blog --
    Baseline Technologies

  • Mails blocked in queue the moment forefront for exchange 2010 started

    Hi,
    We have newly installed Forfront protection 2010 for Exchange 2010 installed in our exchange 2010 Edge Server.
    Mails got struck in the Queue immediatly after the forefront installations.
    Mailflow works properly one we unhook the forefront from Exchange.
    need to enable the forefront. Got struck in these. How to proceed up further.
    Thanks,
    Pradeep

    Hi,
    Please compare your configuration with the following blog or video. These might help.
    http://araihan.wordpress.com/2010/03/15/forefront-protection-2010-how-to-install-and-configure-forefront-protection-2010-for-exchange-server-2010step-by-step/
    http://www.youtube.com/watch?v=b2BgTmeXwUs
    (Note: Microsoft provides third-party contact information to help you find technical support. This contact
    information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • If the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?

    if the Microsoft Forefront Protection 2010 for Exchange Server can use for exchange server 2013?

    thanks for your reply!
      what's protection software can use for exchange server 2013?
    Hi,
    Most (if not all) of the bigger vendors has a product that supports Exchange 2013, so look them up.
    Exchange 2013 has some Anti-Spam and Anti-Malware Protection functionality that you can read about here:
    http://technet.microsoft.com/en-us/library/jj150481(v=exchg.150).aspx
    Martina Miskovic

  • Spam notification on Microsoft Forefront Protection 2010 for Exchange Server

    Hello
    I'm using Microsoft Forefront Protection 2010 for Exchange Server on edge Exchange2010 SP2.
    I did know I can't configure any notification for detected spam, because the result would be that the users inbox would be spammed with Forefront notifications instead of the real spam.
    http://social.technet.microsoft.com/Forums/forefront/en-US/6c293ded-8e61-44a1-ac25-bb685ecd1c7c/notification-spam-forefront-for-exchange-2010
    But I can't find the Forefront notifications in tracking logs.
    Is it usual ?
    if not, why the Forefront notifications was't send?
    Thanks for any ideas.
    Hiroko

    Hi,
    I checked smtp log of our Exchange server.
    But I think I can't search the logs.
    Could you please tell me the word of error on smtp
    log.
    Thanks for any ideas.
    Hiroko

  • Problems with scan jobs Forefront protection 2010 for exchange server administrator console

    Dears,
    I have the following problem with the
    CAS server:
    How do I fix it?
    thanks for your reply
    Edwin Duran Ospina

    Hi,
    FPE will now post a warning if any items are present in the Undeliverable archive folder. You could remove the stuck email from "%Program Files (x86)%\ Microsoft Forefront Protection for Exchange Server\Data\Archive\Undeliverable".
    For more information: http://support.microsoft.com/kb/2420647
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Microsoft forefront protection 2010 for exchange server is unable to perform the requested function

    I get the following error any time I try and change any setting:
    Microsoft Forefront Protection 2010 for Exchange Server is unable to perform the requested function. This may be becuase Microsoft ForeFront services are unavailable. Ensure that all Microsoft ForeFront services are running and that Windows Powershell is
    functional.
    I have installed the latest rollup for SEP. Rollup 5 I think. I have rebooted the server. I have checked the permissions and they are correct.
    Any thoughts?

    I posted a PowerShell-based workaround in the other thread:
    https://social.technet.microsoft.com/Forums/forefront/en-US/1ccb9a5e-4b08-4f6b-a4bd-32cf5f2cd2b0/cannot-save-any-changes-microsoft-forefront-2010-for-exchange-is-unable-to-perform-the-requested?forum=FSENext
    Mike Crowley | MVP
    My Blog --
    Baseline Technologies

  • MS Forefront Server Security for Exchange Server 2007 SP1 - License Expired - Unable to update

    Hi
    1. My Windows SBS 2008 Server Console shows:
    Virus Protection for e-mail STATUS alert CRITICAL (Forefront Security for Exchange Server)
    Details: None of the engines enabled for updates have been updated in the last week.
    Forefront Security for Exchange Server SP 1
    2. Event Viewer
    Error GetEngineFiles
    Event ID 6012
    Generation: Microsoft Forefront Server Security encountered an error while performing a scan engine update.
    Scan Engine: vBuster (same for microsoft, Kespersky5, Wormlist, etc.)
    Error Code: 0x80004005
    Description: The product license has expired.
    Error Microsoft Forefront Security
    Event ID 7007
    General: None of the engines enabled for updates have been updated in the last week.
    3. About forefront
    Opened Forefront Server Security Administrator > Help > About Forefront
    Forefront Server:
    Version: 10.1.0746
    Service Pack: 1
    Product Id:
    Licensed Components:
    Component: Forefront, License Type: Evaluation, Expiration Date: 16 Dec 2013
    DO I HAVE TO BUY THIS PRODUCT or DO I HAVE TO INSTALL Forefront Security for Exchange Server SP2 or SP3?
    Can please someone advise in this regard,
    Thanks

    -->Component: Forefront, License Type: Evaluation, Expiration Date: 16 Dec 2013
    Evaluation version? didn't activate this product? You
    can convert an evaluation license to a subscription license by activating the product. Be sure to have the product key available when activating FPE. After the product is activated, you can also align when the product expires with your license agreement, and
    easily renew your license by entering a new expiration date.
    Best,
    Howtodo

  • Manual Updates for Forefront Security for Exchange server

    Hello Team
    I have installed forefront security for exchange server 2007 in  CCR  and but there is no internet connectivity as it is in my test lab, 
    I would like to enable the below scan engine and update the scan engine in weekly basis as i cannot do it on daily, (No Internet Connection)
    MS Antimalware engine
    Kaspersky
    and Norman 
    Where can i get / download  the scan engine updates  for the above each  scan engines...and how to installed them manually  without internet connection . Could someone please help

    Hi Quan, and Christian,
    Thanks for that.
    My Query is that,, where can i download the updates , i mean which website can i can download the udpate for the scan engines,
    Since it my testlab environment., i don't have internet connection
    i need to download the updates from external (out of my test lab) and transper those udpates via pendire / hard drive to the test lab and from there i need to update.
    first of all , i would like know which website any source can provide  the updates for these separate scan engine updates.
    Hope you all understand

  • Exchange active sync not loading emails?

    Hi I am currently using a Samsung Note 2 and i've added my Company email account successfully using Microsoft Active Sync options in Email settings.
    however when i go to look at emails, the inbox just stays on "loading..." indefinitely and does nothing.
    Does anyone have any ideas why my phone will not pull emails?
    thank you!

    Hi ,
    This is normal behavior in exchange because of autodiscover feature and it is making up the things easier during new account configuration on mobile devices.
    After giving up the user name and password ,autodiscover is the feature which will bring up the remaining settings that you mentioned .
    We will discuss in terms of security view .
    1.User's password would be confidential .
    However in worst cases someone might know about anyone's password and email address then on such case there would be chance to configure that particular account in any of the mobile devices.
    We can control the above scenario too.
    In exchange Active sync organisation settings we have an option to set the DefaultAccessLevel to quarantine for the devices.So that administrator can decide to allow or block the active sync device which is trying to connect to exchange.
    Reference Link : http://exchangeserverpro.com/preventing-new-activesync-device-types-from-connecting-to-exchange-server-2010/
    Note : If your existing exchange organisation is having active sync devices configured in use then before changing the "Defaultaccesslevel" to quarantine we need to make sure existing active sync device ID'S are added to the corresponding mailboxes
    -ActiveSyncAllowedDeviceIDs 
    Thanks & Regards S.Nithyanandham

Maybe you are looking for

  • Timer option changed to 'Stop Playing' from 'Sleep iphone'. Any idea on how to get the Sleep ipone.

    In the iPhone 4S under the Timer, for the Option, When 'Timer Ends' it used to be a 'Sleep iphone'. After the iOS 5.1 update, I think, it is now changed to 'Stop Playing', which only stops the Music. Any idea how to - put the phone to Sleep mode.

  • *82 in phone number causes phone not to recognize incoming callers

    With my old phone, I put *82 in some numbers to allow only those people to see it was me calling. When they called, the phone was smart enough to ignore the *82 and resolve their name. With the iPhone it seems that if I have *82 in a phone number, it

  • Can you have IDM and GRC on the same stack?

    HI, I am new to IDM and am a Netweaver Basis professional with some performance experience around GRC. Is it wise to place the two together on the same stack? The customer will have 190,000 employees and lord knows what the roles will look like at th

  • Force detection using Application Loader - PROBLEM

    I have never had my 8220 flip connected to any computer and it has the JVM 545 error.  I have printed out the directions from this web site on how to do the force however after double clicking the application loader I have 2 options either update or

  • Fonts not available in new installation of Illustrator

    Just installed Creative Cloud Illustrator and there are no fonts. Photoshop installed fine, but there are no fonts available in Ai - the font menu is completely greyed out. New installation of both so no existing font library. Running Windows 7.