Forefront protection for exchange 2010 - updates?

Installed Exchange EDGE server with Forefront Protection for Exchange 2010.
Installed hotfix update rollup 4 for forefront (I think it's the latest because I haven't found any newer).
We have basically left everything on default in forefront, and if we take a look on dashboard in gui we see this error message:
not all the antimalware engines selected in the forefront adminstration console for scanning have been enabled for updates.
where should we take a look whats not being updated. Please a little help.
with best regards,
bostjanc

Hi.
Meanwhile I have also found information that it has been retired
https://social.technet.microsoft.com/Forums/forefront/en-US/400fa485-edc9-499f-8294-c196496437d8/not-all-of-the-antimalware-engines-enabled-for-updates-successfully-updated-at-the-last-attempt?forum=FSENext
bostjanc

Similar Messages

Frorefront Protection for Exchange 2010 Version Number

Afternoon Community
I am currently research and planning the upgrade of an MS Exchange 2010 Virtual Server. One of the steps requires the upgrade of Forefront Protection for Exchange to be updated to the latest Rollup (KB230203 - Rollup 5). Due to ongoing projects i am aware
that Forefront has never been upgraded by us.
A few weeks ago we noticed our license for the product was due to expire, so we extended the license until Dec 2015. I have noticed that the version number of Forefront is now showing as 11.0.727.0 (Forefront Protection 2010 w Rollup 4). We havent installed
any of the Rollup Hotfixes and i can find no trace of the install under control panel/programs and features.
1. Has anyone recently updated their license and seen that it has changed their version number?
2. How can i confirm that no Rollup Hotfix has been installed?
3. If i go ahead and try to install KB2619883 (Rollup 4), will it cleanly install or will it fail as Forefront thinks the package is already at the correct level?
Any help on this issue would be greatly appreciated.
Barry Fitzpatrick

Hi,
Maybe you can check the Installed Updates in Programs and Features under Control Panel. In addition, if you have Windows PowerShell, you can use Get-Hotfix cmdlet to get the hotfixes that have been applied to the local computer.
Best regards,
Susie

Removing Forefront Protection for Exchange

I am looking into moving away from Forefront Protection for Exchange since it can't be renewed (prob to Cisco Ironport).
What exactly do I need to do remove it completely?
Current set up:
Exchange 2010 behind Forefront TMG.
Forefront Protection for Exchange used to block spam and scan for viruses.
I believe there is a edge subscription between TMG and Exchange
Exchange transport role installed on TMG server
Heath

Hi,
when FPE is integrated into TMG you first should disable the E-Mail protection in TMG. After that FPE runs indepented and you can simply uninstall it like any other installation.
Greetings
Christian
Christian Groebner MVP Forefront
Hi Christian
Could you be more specific as to exactly what in TMG will "disable the E-Mail protection in TMG" as it relates to the uninstallation of FPE?
E.g. In TMG, on the "E-Mail Policy" tree node with the focus on the "E-Mail Policy" tab, there are 3 configurable items that I'm unsure of will achieve the above. These are:
"E-Mail Policy" : Enabled
"Protection Manager Integration" : Enabled
"Email Policy Integration Mode" : Enabled
Any specific one of the above or all?
Thanks
Jaans

Alternative to Forefront Protection for Exchange

Since Microsoft is discontinuing Forefront Protection for Exchange, does anyone know how long they will continue to provide updates to the anti-virus engines? To be honest, our perimeter security provides just about all the protection we need but I don't
like not having anti-virus on Exchange, especially the mailbox servers.
Is MS providing any alternative other than going to the cloud or are we just being forced to find a third party product? I really liked the MS product because support would always play third party products every time we had a problem. Our agreement does
expire until 2016 but I think we will be on 2013 by then for sure and I hear 2013 has some remedial anti-virus support built in.

Since Microsoft is discontinuing Forefront Protection for Exchange, does anyone know how long they will continue to provide updates to the anti-virus engines? To be honest, our perimeter security provides just about all the protection we need but I don't
like not having anti-virus on Exchange, especially the mailbox servers.
Is MS providing any alternative other than going to the cloud or are we just being forced to find a third party product? I really liked the MS product because support would always play third party products every time we had a problem. Our agreement does
expire until 2016 but I think we will be on 2013 by then for sure and I hear 2013 has some remedial anti-virus support built in.
3rd party or cloud is the only option. 2013 has basic malware detection.
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Expiration of "Subscription license of Microsoft Forefront Protection for Exchange Server"

We have "Microsoft Forefront Protection for Exchange
Server" running in the company. Now I face the expiration of "Subscription license of Microsoft Forefront Protection for Exchange Server".
I learned from
http://blogs.technet.com/b/server-cloud/archive/2012/09/12/important-changes-to-forefront-product-roadmaps.aspx that "... products will continue to be supported through that date (12/31/2015) in order to provide with customers sufficient
time to move to alternative solutions". My concern is, that Microsoft Forefront Protection for Exchange Server does not know about that grace period.
It claims:
Your Subscription license of Microsoft Forefront Protection for Exchange Server has expired. The product will continue to operate during the extended grace period
until 5/1/2013. Subsequently, scanner updates will be disabled and the product will operate with reduced functionality.
Is there a way to get a new license number? I called our software vendor, but Microsoft does not sell licenses anymore.
Thank you for your assistance.

Hi
We just talk about exchange deployment and configuration in this forum.
If you have any questions about licensing, please use the contact information in
here which would be the best place for seeking the answer.
Terence Yu
TechNet Community Support

Reactivating Forefront Protection for Exchange

My EA agreement expired few months back and with that Forefront Protection for Exchange also got expired.
Now I have renewed EA agreement.
When I open Forefront Protection for Exchange, I get a message saying, "Enter your license agreement number and license end date." There is also a box to enter these details.
Will this be reactivated if I enter my new EA agreement number and expired date.

Hi,
You may need to contact Microsoft to confirm this.
Here is a article About product licensing.
https://technet.microsoft.com/en-us/library/ee358857.aspx
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Support Forefront Protection 2010 for Exchange 2010 SP3

Hi
I have a simple question: Is there a full support of FPE 2010 (Version 11.0.727.0) for Exchange 2010 SP3 (and Rollup Updates)?
Thomas

Hi,
It seems that FPE 2010 for exchange 2010 SP3 is supported and you need to install the Rollup 4. For more detailed information, please refer to the link below:
Hotfix Rollup 4 for Microsoft Forefront Protection for Exchange
Updates for Microsoft Forefront and Related Technologies
Hope this helps!
Susie

Microsoft Forefront Server Protection for Exchange Registration Service does not start automatically

Hello,
I am having an issue when I start my TMG 2010 machine:
(*TMG 2010 + Forefront protection for Exchange + Exchange Edge server role, acting like a SMTP relay and Antispam filter)
The service "Microsoft Forefront Server Protection for Exchange Registration Service"
does not start, it is set to "Manual".
I tried to find some information about which services should be started and which should not, but I cannot find such information, not even in Technet (my fault probably).
Thanks in advance.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

Hi,
Have you received any errors in event logs when
you started the Microsoft Forefront Server Protection for Exchange Registration Service?
Based on my research,
Microsoft Forefront Server Protection Controller service is a dependency of the Microsoft Forefront Server Protection Registration service and the Microsoft Forefront
Server Protection Registration service is a dependency of the Microsoft Exchange Transport service.
The Microsoft Forefront Server Protection Registration service normally only runs for a brief time (less than a minute) when FPE initializes. It then shuts
down and does not need to be running for transport scanning to occur.
You can refer to the link below:
Services
Best regards,
Susie

Symantec Mail security & Forefront protection for Exchage on same environment

We are Running Symantec Mail security on Edge transport with all strict antispam policies but still some users once in a while recieve a spam here or there ,so we are planning to install Forefront Protection for exchange on hub transport , so both products
are running , is this a do able scnerio , will we face any issues....please suggest from Microsoft point of view,

Hi,
As far as I know, no single tool or process can eliminate all spam. For more spam features and easier management, you can elect to purchase the Forefront Online Protection for Exchange (FOPE) hosted email filtering service or the next version
of this service, Microsoft Exchange Online Protection (EOP).
http://technet.microsoft.com/en-us/library/jj218660(v=exchg.150).aspx
http://technet.microsoft.com/en-us/library/jj673032(v=exchg.150).aspx
Thanks,
Angela Shi
TechNet Community Support

How to test if Spam protection with Forefront for Exchange 2010 works

Hi there.
Installed forefront for exchange 2010 on Exchange Edge server.
We have tested virus protection with creating EICAR, but the question is, is there a way to check if SPAM Works fine, and how to?
with best regards
bostjanc

Hi bostjanc,
Since this is an issue on the Forefront side, I suggest ask Forefront Forum for help so that you can get more professional suggestions. For your convenience:
https://social.technet.microsoft.com/Forums/forefront/en-US/home?forum=FOPE
However, based on my knowledge, use the EICAR antivirus test file is the only built-in method to check whether the Anti-Spam configured correctly.
You can try to send some test spams to your Exchange server for testing, even if this is a stupid method : )
Thanks
Mavis Huang
TechNet Community Support

Forefront for exchange 2010 - how long?

Hi there.
Read this article: http://blogs.technet.com/b/server-cloud/archive/2012/09/12/important-changes-to-forefront-product-roadmaps.aspx
I would have additional question.
Our company is MS Gold Partner and we need to renew our yearly license every year around AUGUST.
We are thinking about changing our SPAM filter external gateway with exchange edge, but as we can see from that article, you Will be unable to renew it license after December 2015.
I know that Microsoft offers online Forefront protection but that is not option in our case because of data sensitivity.We need an answer how long we Will be able to get updates regarding forefront for exchange 2010 and be licensed ok?
I guess after 2015 december Forefront Exchange 2010 Will no longer recieve spam updates thru Windows update, right?
And also engines Will not be updated after that date?
Is this the correct view and understanding?
with best regards
bostjanc

Hi Bostjanc,
>>how long we Will be able to get updates regarding forefront for exchange 2010 and be licensed ok?
I think you must have seen the information below in that blog.
For current customers, Microsoft will continue to support the subscription through Dec.31, 2015. If customer subcriptions expire before Dec.31, 2015, and annot be renewed because the product is no longer offered, these products will continue to be supported
through that date in order to provided with customers sufficient time to move to alternative solutions.
You could also check the following blog.
License extension for End-of-Life Antigen/Forefront products
Note: Microsoft provides third-party contact information
to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
If the information above still cannot resolve your questions, please contact Microsoft to get definitive answers.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Mails blocked in queue the moment forefront for exchange 2010 started

Hi,
We have newly installed Forfront protection 2010 for Exchange 2010 installed in our exchange 2010 Edge Server.
Mails got struck in the Queue immediatly after the forefront installations.
Mailflow works properly one we unhook the forefront from Exchange.
need to enable the forefront. Got struck in these. How to proceed up further.
Thanks,
Pradeep

Hi,
Please compare your configuration with the following blog or video. These might help.
http://araihan.wordpress.com/2010/03/15/forefront-protection-2010-how-to-install-and-configure-forefront-protection-2010-for-exchange-server-2010step-by-step/
http://www.youtube.com/watch?v=b2BgTmeXwUs
(Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Using the pre-configured SCCM 2012 SP1 endpoint protection templates for Exchange 2010?

I am looking to update the exclusions for SCCM Endpoint Protect clients performing server AV protection on Exchange 2010 nodes.
Within SC there are a number of pre-defined templates, including ones for Exchange 2007 / 2010. However when I analyse these they do not appear to list all the exclusions that the Exchange product team define on TechNet -
http://technet.microsoft.com/en-us/library/bb332342(v=exchg.141).aspx
So do I;
1 - Use the template as it has been verified by Microsoft for using with Exchange 2010 and it covers all I need to exclude?
2 - Edit the template, adding in the additional exclusions as defined by the Exchange product team?
Would whichever logic I use apply to other templates, such as SQL, SharePoint, etc as well?
Thank you
Alan

As I cut and pasted the xml file I noticed the following comment that I had missed before..........
        
        
        
Still going with adding the full recommended list from TechNet though

Uninstall Forefront for Exchange 2010

I have acquired another spam filter appliance that will used instead of Forefront for Exchange 2010.
How do I uninstall Forefront for Exchange 2010 without any issues while still using Exchange 2010.
Basically the email will go through the email appliance filter then to Exchange. I want to deactivate or uninstall Forefront for Exchange with impacting my email services. Is it as simple as just uninstalling it?

Hi,
About uninstalling Forefront for Exchange 2010, you could check the following article.
If spam filtering was enabled, the configurations in the corresponding antispam settings in Microsoft Exchange that were leveraged by FPE will be retained by their Exchange antispam counterparts after FPE is uninstalled. These settings include: Connection
Filtering, Sender ID Filtering, Sender Filtering, and Reciepient Filtering. To change these configuration settings you will need to modify them through the Exchange management console.
Uninstalling Forefront Protection 2010 for Exchange Server
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Manual Updates for Forefront Security for Exchange server

Hello Team
I have installed forefront security for exchange server 2007 in CCR and but there is no internet connectivity as it is in my test lab,
I would like to enable the below scan engine and update the scan engine in weekly basis as i cannot do it on daily, (No Internet Connection)
MS Antimalware engine
Kaspersky
and Norman
Where can i get / download the scan engine updates for the above each scan engines...and how to installed them manually without internet connection . Could someone please help

Hi Quan, and Christian,
Thanks for that.
My Query is that,, where can i download the updates , i mean which website can i can download the udpate for the scan engines,
Since it my testlab environment., i don't have internet connection
i need to download the updates from external (out of my test lab) and transper those udpates via pendire / hard drive to the test lab and from there i need to update.
first of all , i would like know which website any source can provide the updates for these separate scan engine updates.
Hope you all understand

Forefront protection for exchange 2010 - updates?

Similar Messages

Maybe you are looking for