Foreign Application Commandeers Network!

Hello, Apple Peeps;
Late last evening I was fooling around in ProTools (recording software), specifically in the Midi setup area, which required me to go into the Audio MIDI Setup of my trusty G4 (MDD, Dual 1.25, etc) and do some routing. I was needing to solve a problem unfamiliar to me and was trying different things, being careful to undo whatever failed to have the desired effect.
This morning I tried to go online and got an error saying I wasn't connected to the internet. After doing all those routine fix-ups (router/modem/system restarts, reconnecting cables, etc) I went into my network settings where it became obvious right away that my system wasn't seeing any of my network protocols. I use a PCI Card Ethernet hook up (since my internal Ethernet port separated from the motherboard) using DHCP and have had no problems over the year since I installed the card. None of my network information was showing where it should have been in the Network Status window: IP Address, Subnet Mask & Router were all missing.
I began setting up a new connection and got this message:
"*Your network settings have been changed by another application*."
So it appears my system has no clue it has network capabilities. It's blind. Any suggestions on how to get my network back in control of itself?
Thanks!
Cayce
<edited by host>
PS: Things I've tried: Trashing every related preference pane; Cable tech support; So many attempted other things I can't remember.

The Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON.
Any Proxies set in Network>Proxies tab?
Have you tried typing the Router's IP into the URL bar of Safari?
Do you know that IP?

Similar Messages

  • Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

    Hi,
    starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
    a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
    We figured out a workaround though: The applications run fine when launching from a FQDN share (like
    \\share.domain.Company.com) and only cause problems when running from
    \\share directly. They have worked fine for years without FQDN though.
    Any ideas?
    Error Details (the Kind of error differs greatly):
    # 1 #
    Log Name: Application
    Source: Application Error
    Date: ...
    Event ID: 1005
    Task Category: (100)
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: vmDEV
    Description:
    Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
    because of this error.
    Program: XYZ
    File:
    The error value is listed in the Additional Data section.
    User Action
    1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
    2. If the file still cannot be accessed and
    - It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
    - It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
    3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
    4. If the problem persists, restore the file from a backup copy.
    5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
    Additional data
    Error value: C000020C [ also seen with code C00000C4]
    #2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
    Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x00026549
    ID des fehlerhaften Prozesses: 0x13ac
    Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
    Pfad der fehlerhaften Anwendung: \\share\application.exe
    Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
    Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    Anwendung: XYZ.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
    Stapel:
    # 3 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
       bei System.Windows.Forms.Control.NotifyEnter()
       bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
    # 4 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.IO.UnmanagedMemoryStream.ReadByte()
       bei System.IO.BinaryReader.ReadByte()
       bei System.IO.BinaryReader.Read7BitEncodedInt()
       bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
       bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
       bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
       bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
    # 5 #
    Anwendung: WpfApp.exe
    Frameworkversion: v4.0.30319
    Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
    Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
    Stapel:
       bei System.Reflection.RuntimeParameterInfo.get_Name()
       bei System.Diagnostics.StackTrace.ToString(TraceFormat)
       bei System.Environment.GetStackTrace(System.Exception, Boolean)
       bei System.Exception.GetStackTrace(Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString(Boolean, Boolean)
       bei System.Exception.ToString()
    # 6 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
    Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
    Ausnahmecode: 0xe0434352
    Fehleroffset: 0x00012f71
    ID des fehlerhaften Prozesses: 0xa68
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
    Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
    Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
    # 7 #
    Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
    Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
    Ausnahmecode: 0xc0000006
    Fehleroffset: 0x0006db27
    ID des fehlerhaften Prozesses: 0x18dc
    Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
    Pfad der fehlerhaften Anwendung: \\share\xyz.exe
    Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
    Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
    Vollständiger Name des fehlerhaften Pakets:
    Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

    Hi,
    >>The applications run fine when launching from a FQDN share
    It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
    the share correctly.
    If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
    Best Regards.
    Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How to run/test application using network streams

    Hello,
    I'm confused on what steps to follow to test an application using the network streams feature. After reading a lot and going through other discussions I found 2 simple VIs on the last post here http://forums.ni.com/t5/LabVIEW/Network-streams-problem-with-cRIO-9022/td-p/1401576 (I attached the VIs, which I modified just a bit) which I believe have been tested before and work so I was trying to do the same in my desktop and it does not work. I get the same scenario when I was trying to test the code I wrote: no bugs, both VIs run but nothing happens.
    According to the link above this is what is supposed to happen: "a PC hosts a GUI (see mainGUI.VI) that sends an array of doubles to the cRIO via one stream and reads a double value back via another. The cRIO, via the scan interface, reads the array via the first stream and writes an analog value to the host via the second (see mainRT.VI). "
    The current set up is: 
    1. Add both VIs to the blank project with the target device cRIO (see attached screenshot)
    2. Deploy mainRT.vi on the cRIO
    3. Run both at the same time
    Am I missing something?
    Also, I have been reading that there are two ways of testing this. One running both VIs on the PC and the other actually using the targeted device, in this case cRIO. Is that correct?
    Please help!
    Thank you
    Attachments:
    project explorer.jpg ‏36 KB
    mainRT.vi ‏62 KB
    mainGUI.vi ‏20 KB

    Connections have TimeOuts, so you have a little "wiggle room" in deciding which to load first.
    In my situation, one side is a Remote Real Time system ("Remote"), which has the behavior that when it starts up, it runs the code that I want, which includes establishing the Remote side of the Network Stream.  I make all (four) streams use the Remote as the site whose URL (or IP) I need to know.  I set them up so that if they time out (I think I may use 15 seconds), they simply close the connections and try again, exiting when all four connections are established, and going on to run the rest of the Remote code.
    On the Host, the expectation is that the code is already running on the Remote.  Accordingly, on the Host side, the Initialization sequence establishes the four connections, all using the IP (URL) of the Remote.  I also use a 15-second timeout, but run it inside a second loop to allow three tries before I give up (and generate an Error Exit).  Otherwise, if all the connections get made, I've got my Network Streams connected and can continue.
    In this scheme, both the Host and Remote code are in the same Project.  What I typically do is to Build the Remote code, deploy it, and set it to run as the Startup.  If you are not dealing with a Real Time System, you might not have that option.  But you should deploy your Remote code, and start both programs within each other's respective TimeOut windows.  Since in my scheme the Remote Window is infinite, I (automatically) start it first, then start the Host.  I haven't timed it, but I'd guestimate that the connections are established in at most a few tenths of a second.
    Bob Schor

  • Auto Run Application On Network Connect

    I have a very simple application that I created in Automator. I want this application to automatically run only after I connect to a *particular wireless network*. I want this all to happen in the back ground (hence the "automatic". Is there any way to do this?
    In case it helps, it is an application that mounts a network drive. I want this program to run only when I connect to the network that has the drive connected to it.
    Thanks a lot.
    Message was edited by: Jake Wallace

    You might have better luck getting help via the Applescript forum...
    http://discussions.apple.com/forum.jspa?forumID=724&start=0

  • Java application watching network calls?

    if i have a java application open and running, do i have access to what network calls are being sent out of the computer?
    for example, could i see what requests web browsers are making? could i see what traffic the itunes is doing? or at least where the calls are going to?

    No

  • Applications requiring network access.. help!

    I have a 6500 Classic and when I open a game with ads or a map service (such as Mobile GMaps), it asks me to "allow network access". I'm running on 3 Network and was wondering if I get charged for it. I'm also on contract which has free to browse service.

    29-Mar-2008 12:12 AM
    cobra_loz wrote:
    I have a 6500 Classic and when I open a game with ads or a map service (such as Mobile GMaps), it asks me to "allow network access". I'm running on 3 Network and was wondering if I get charged for it. I'm also on contract which has free to browse service.
    If your application downloads data then you should be charged.
    If my post has helped you please click the white star on the right

  • Locking Applications Folder-Network Home Folders

    I am managing about 225 macbooks out on campus over OD/Network Home Folders. All is working great. One issue I've run into for the last three years is that kids can drag an application out of the Apps folder and drag it to their network home desktop. They then try to run it from there and all sorts of mayhem ensues.
    Any ideas on how to stop that from happening? I've read some about using sticky bits. I am using WGM to lock down pretty much everything else but kids can still drag apps to their desktops.
    Thanks for any info in advance.

    As long as they have permissions to read the folder, (usually by membership of a group) the home directories are created when they log in. You can create them manually using the button in the Home tab of Workgroup manager.
    If they are not automatically created, then there is a fault.

  • Swing application with network event handling

    Hello, hope this is the right place for this post. I'm the design phase of a client application in java which talks to a remote server written in C via sockets. I have a design problem: I want my Swing app to have a GUI with buttons and all for normal activities, which activities report to the server, and I want the client to react to server calls anytime without interrupting normal GUi activities. Plus, all must work together, so I would prefer having a single thread for the app. (Think of an IRC client: the user uses the GUI for activities and sendim messages, and meanwhile the client listens for messages from the server and display them as they arrive). My question is: is this possible?
    I have something like (in pseudo-java):
    classMyApp extends JFrame {
      public MyApp() {
        // Manages and create the GUI
        NetHandler h = new NetHandler(this);
        h.connect();
        while(true) {
          h.pollNetEvents();
    class NetHandler {
      private BufferedReader iStream;
      private PrintWriter oStream;
      private MyApp app;
      public NetHandler(MyApp a) {
        app = a;
        Socket socket = createSocket(ip, port);
        iStream = new BufferedReader(new InputStreamReader(socket.getInputStream()));
        oStream = new PrintWriter(socket.getOutputStream());
        handshakeWithServer(); // Login & Password
      public pollNetEvents() {
        try {
          String s;
          for (;;) {
            s = iStream.readLine();
            if (s.equals("") == false)
              break;
            else
              app.parseCommand(s);
        catch (IOException e) {
          app.sendMessage("Error in pollNetEvent: " + e);
    }Roughly, something like this. With this solution the GUI works, but I cannot get the message the server sends.
    I hope my message is clear enough. Can anybody help me with the design of my app? Thanks a lot.
    Fabio.

    You might consider posting this in the Swing forum. You might get a more complete response there, but here are my first thoughts.
    -- I think you will end up wanting to use multiple threads, but only one thread will update the UI. For more about threading in Swing, see this tutorial: http://java.sun.com/docs/books/tutorial/uiswing/misc/threads.html
    and maybe also here: http://www.sourcebeat.com/TitleAction.do?id=10 (look at the sample chapter on Threads)
    -- For the polling code ...
    Of course, if you use the classes provided for client/server communication described below, you don't need to write your own polling code. You may still wish worry about threading so that your UI remains responsive and does not encounter major issues: http://java.sun.com/developer/JDCTechTips/2005/tt0419.html#1
    -- Updates to the UI from thread(s) that are not on the Event Dispatch Thread (the one that controls the UI) must be posted using the SwingUtilities methods, such as invokeLater
    Message was edited by:
    pthorson

  • Network error 10060 client timed - for only a particular Application!

    Hi All,
    I'm getting the following error when I try to connect to Essbase from Excel sheet but for only a particular Application & Database:
    network error [10060]: Unable to connect to [server_name_xxx:1423]. the client timed out waiting to connect to essbase agen TCP/IP........
    I'm able to connect to other applications/dbs residing on the same server. But I get this error only for this particular application.
    Kindly help.
    Thanks.

    you will receive this error if the data cannot be retrieved within the appropriate timeout window. If your query is big, or you have less/no aggregations on the cube (ASO) , Addin will wait upto certain period and throw time out error. You can try following tips
    1. Change essbase.cfg file. Increase "NETDELAY" and "NETRETRY COUNT" to 300000 ( 5 mins) and restart services.
    2. Open registry editor in you mechine and navigate to "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings" and add/edit the following DWord items:
    ReceiveTimeout 300000
    KeepAliveTimeout 300000
    ServerInfoTimeout 300000
    * note: The timeout values in the registry are in milliseconds. So 300000 is the equivalent of 5 minutes
    Is your application is a BSO or ASO?

  • Help! Saving an image to stream and recreating it on client over network

    Hi,
    I have an application that uses JDK 1.1.8. I am trying to capture the UI screens of this application over network to a client (another Java app running on a PC). The client uses JDK 1.3.0. As AWT image is not serializable, I got code that converts UI screens to int[] and persist to client socket as objectoutputstream.writeObject and read the data on client side using ObjectInputStream.readObject() api. Then I am converting the int[] to an Image. Then saving the image as JPEG file using JPEG encoder codec of JDK 1.3.0.
    I found the image in black and white even though the UI screens are in color. I have the code below. I am sure JPEG encoder part is not doing that. I am missing something when recreating an image. Could be colormodel or the way I create an image on the client side. I am testing this code on a Win XP box with both server and client running on the same machine. In real scenario, the UI runs on an embedded system with pSOS with pretty limited flash space. I am giving below my code.
    I appreciate any help or pointers.
    Thanks
    Puri
         public static String getImageDataHeader(Image img, String sImageName)
             final String HEADER = "{0} {1}x{2} {3}";
             String params[] = {sImageName,
                                String.valueOf(img.getWidth(null)),
                                String.valueOf(img.getHeight(null)),
                                System.getProperty("os.name")
             return MessageFormat.format(HEADER, params);
         public static int[] convertImageToIntArray(Image img)
             if (img == null)
                 return null;
            int imgResult[] = null;
            try
                int nImgWidth = img.getWidth(null);
                int nImgHeight = img.getHeight(null);
                if (nImgWidth < 0 || nImgHeight < 0)
                    Trace.traceError("Image is not ready");
                    return null;
                Trace.traceInfo("Image size: " + nImgWidth + "x" + nImgHeight);
                imgResult = new int[nImgWidth*nImgHeight];
                PixelGrabber grabber = new PixelGrabber(img, 0, 0, nImgWidth, nImgHeight, imgResult, 0, nImgWidth);
                grabber.grabPixels();
                ColorModel model = grabber.getColorModel();
                if (null != model)
                    Trace.traceInfo("Color model is " + model);
                    int nRMask, nGMask, nBMask, nAMask;
                    nRMask = model.getRed(0xFFFFFFFF);
                    nGMask = model.getRed(0xFFFFFFFF);
                    nBMask = model.getRed(0xFFFFFFFF);
                    nAMask = model.getRed(0xFFFFFFFF);
                    Trace.traceInfo("The Red mask: " + Integer.toHexString(nRMask) + ", Green mask: " +
                                    Integer.toHexString(nGMask) + ", Blue mask: " +
                                    Integer.toHexString(nBMask) + ", Alpha mask: " +
                                    Integer.toHexString(nAMask));
                if ((grabber.getStatus() & ImageObserver.ABORT) != 0)
                    Trace.traceError("Unable to grab pixels from the image");
                    imgResult = null;
            catch(Throwable error)
                error.printStackTrace();
            return imgResult;
         public static Image convertIntArrayToImage(Component comp, int imgData[], int nWidth, int nHeight)
             if (imgData == null || imgData.length <= 0 || nWidth <= 0 || nHeight <= 0)
                 return null;
            //ColorModel cm = new DirectColorModel(32, 0xFF0000, 0xFF00, 0xFF, 0xFF000000);
            ColorModel cm = ColorModel.getRGBdefault();
            MemoryImageSource imgSource = new MemoryImageSource(nWidth, nHeight, cm, imgData, 0, nWidth);
            //MemoryImageSource imgSource = new MemoryImageSource(nWidth, nHeight, imgData, 0, nWidth);
            Image imgDummy = Toolkit.getDefaultToolkit().createImage(imgSource);
            Image imgResult = comp.createImage(nWidth, nHeight);
            Graphics gc = imgResult.getGraphics();
            if (null != gc)
                gc.drawImage(imgDummy, 0, 0, nWidth, nHeight, null);       
                gc.dispose();
                gc = null;       
             return imgResult;
         public static boolean saveImageToStream(OutputStream out, Image img, String sImageName)
             boolean bResult = true;
             try
                 ObjectOutputStream objOut = new ObjectOutputStream(out);
                int imageData[] = convertImageToIntArray(img);
                if (null != imageData)
                    // Now that our image is ready, write it to server
                    String sHeader = getImageDataHeader(img, sImageName);
                    objOut.writeObject(sHeader);
                    objOut.writeObject(imageData);
                    imageData = null;
                 else
                     bResult = false;
                objOut.flush();                
             catch(IOException error)
                 error.printStackTrace();
                 bResult = false;
             return bResult;
         public static Image readImageFromStream(InputStream in, Component comp, StringBuffer sbImageName)
             Image imgResult = null;
             try
                 ObjectInputStream objIn = new ObjectInputStream(in);
                 Object objData;
                 objData = objIn.readObject();
                 String sImageName, sSource;
                 int nWidth, nHeight;
                 if (objData instanceof String)
                     String sData = (String) objData;
                     int nIndex = sData.indexOf(' ');
                     sImageName = sData.substring(0, nIndex);
                     sData = sData.substring(nIndex+1);
                     nIndex = sData.indexOf('x');
                     nWidth = Math.atoi(sData.substring(0, nIndex));
                     sData = sData.substring(nIndex+1);
                     nIndex = sData.indexOf(' ');
                     nHeight = Math.atoi(sData.substring(0, nIndex));
                     sSource = sData.substring(nIndex+1);
                     Trace.traceInfo("Name: " + sImageName + ", Width: " + nWidth + ", Height: " + nHeight + ", Source: " + sSource);
                     objData = objIn.readObject();
                     if (objData instanceof int[])
                         int imgData[] = (int[]) objData;
                         imgResult = convertIntArrayToImage(comp, imgData, nWidth, nHeight);
                         sbImageName.setLength(0);
                         sbImageName.append(sImageName);
            catch(Exception error)
                error.printStackTrace();
             return imgResult;
         }   

    While testing more, I found that the client side is generating color UI screens if I use JDK 1.3 JVM for running the server (i.e the side that generates the img) without changing single line of code. But if I use JDK 1.1.8 JVM for the server, the client side is generating black and white versions (aka gray toned) of UI screens. So I added code to save int array that I got from PixelGrabber to a text file with 8 ints for each line in hex format. Generated these files on server side with JVM 1.1.8 and JVM 1.3. What I found is that the 1.1.8 pixel grabber is setting R,G,B components to same value where as 1.3 version is setting them to different values thus resulting in colored UI screens. I don't know why.

  • Can't connect to computers on the same network and same office

    Hi everyone, I have this problem from some time now, I have on the same network some computers with ethernet, and some with Wi-Fi.
    All are connected to the C-Net Wireless-G Router.
    My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area, but I have an iMac 2.0 next to my iBook and I can't see it.
    How is that possible? Am I making something wrong with the subnet mask or IP address?
    All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
    The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
    Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
    If anyone could give me a hand here, I will apprettiate the advice.
    Thaks to everyone, Pablo from Argentina.

    rccharles wrote:
    All are connected to the C-Net Wireless-G Router.
    My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area,
    but I have an iMac 2.0 next to my iBook and I can't see it.
    How is the iMac 2.0 connected? cable or wireless?
    iMac is on Wi-Fi.
    How is that possible? Am I making something wrong with the subnet mask or IP address?
    You are on a different subnet. In x.x.x.0 the x's are different.
    All the computers are in the same subnet, cable ones and wi fi ones.
    All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
    The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
    Look at what ip addresses you have on each machine.
    I have different IPs on each machine, do you need the numbers?
    Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
    Macintosh-HD -> Applications -> Utilities -> Network Utility.app
    Use the ping command to see what is going on. Ping 192.168.1.254, source & destination machine. 127.0.0.1 is an alias of the machine you are on.
    !http://farm3.static.flickr.com/2575/4090068351_6fb8dc3d55.jpg"!
    check out port scan. This will tell you if sharing is on.
    !http://farm3.static.flickr.com/2506/4090068193_7566e620cf.jpg!
    I will try this
    Message was edited by: rccharles

  • HP LaserJet Pro m201dw suddenly not printing via ethernet (wired) network using Mac OS 10.10.1

    Hi,
    My brand-new HP LaserJet Pro M201dw is suddenly not cooperating when I go to print using my Mac. I had it set up following the directions which closest matched my OS and it worked perfectly for one week; today suddenly it won't cooperate. The printer is seen on the network. I have deleted and re-installed it from my System Preferences several times. I have rebooted my computer. I cannot seem to get it to work. Even the HP Utility is having difficulty. The HP Utility is suddenly slow and often needs to be force-quit as it hangs when I navigate to other applications (web browser, etc.) while waiting for it to respond to clicks. Most often the HP Utility shows the printer in the status ara as "Device Status: Unknown" and "Supplies: Unknown" which it wasn't having issues with yesterday.
    Can anyone help me troubleshoot this device? Is there better documentation than the basic setup page here on HP? What about adjusting some setting in the printer web page (which I can access) - is the answer in there?
    Thank you.

    Hi @td2243,
    I see that you are having issues printing over the wired network. I would like to help you out with this issue today.
    Try and ping the printer.
    On the Apple menu bar, click Go, then click Applications, then Network Utilities. (you can go to the finder and type in Network Utilities)
    Click on PING from the bar at the top of the window.
    Enter the IP Address of the printer and click Ping.
    Did you get any replies back?
    Repair the Disk Permissions on the Mac:
    Close all applications.
    On the Apple menu bar, click Go, click Applications and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left.
    Click Verify and then Repair Disk Permissions.
    Restart the computer..
    Reset the Printing System:
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Click the Apple icon and then click System Preferences.
    Click Printers & Scanners.
    Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system.
    Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
    Try printing again.
    Here is some more information on this issue.
    A 'Network Product(s) Not Found' Error Displays for the HP LaserJet Pro M201 and M202 Printer Series...
    How is the printer name listed in Printers and Scanners? You may provide screen shots if you like.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • ACL found but not expected on . . . applications

    Like others who've posted here, I stupidly did an "apply to enclosed items" when trying to fix a permission problem on a non-Apple application. I should have targeted my repair to that one application, but assumed there were more permission problems among Applications. (After moving a user to this new computer, I'd been dealing with quite a few permissions issues, but mostly on her work files, so I was a little distracted.) I realize the long list of "ACL found but not expected" messages when doing a "repair permissions" are not really a problem, but I'd like to get them fixed - get rid of the clutter. (If there was a real permission issue, it would be difficult to see among the clutter.)
    Anyway, I've read (from V.K.) to do the following: In terminal, enter:
    sudo chmod -RN /Applications
    sudo chmod +a "everyone deny delete" /Applications /Applications/Utilities
    then: "next delete everything in Applications except for Timemachine.app and the Utilities folder. next restore all that stuff from Time machine. next delete all contents of the Utilities folder and then restore it from TM. repair permissions afterward. that should fix all permissions back to what they were."
    Problem is, I don't have these applications backed up in Time Machine. (I back up five computers to a tape drive through Retrospect, and only back up our work and certain other specific "user created" files. In case of a total crash, I figure I'd generally rather "start fresh" with whatever OS a new computer would come with.)
    So, would it work to do the Terminal thing first, then reinstall the applications from the OS DVD via Pacifist? I guess any applications that have updated since the OS DVD would then be updated via Software Update?
    Any other ideas? (Kappy mentioned entering "sudo chown -R root:admin /Applications" in Terminal, and nothing about having to restore
    applications.)
    Other than this annoyance, the computer is working fine.
    Thanks,
    Ginny

    Here goes . . .
    ACL found but not expected on "Applications/Utilities/X11.app/Contents/CodeDirectory".
    Repaired "Applications/Utilities/X11.app/Contents/CodeDirectory".
    ACL found but not expected on "Applications/Utilities/X11.app/Contents/CodeRequirements".
    Repaired "Applications/Utilities/X11.app/Contents/CodeRequirements".
    ACL found but not expected on "Applications/Utilities/X11.app/Contents/CodeResources".
    Repaired "Applications/Utilities/X11.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/X11.app/Contents/CodeSignature".
    Repaired "Applications/Utilities/X11.app/Contents/CodeSignature".
    ACL found but not expected on "Applications/Utilities/Java Preferences.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Java Preferences.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Migration Assistant.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Migration Assistant.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Migration Assistant.app/Contents/Resources/MigrationAssistantUI.bundle/Contents/CodeResou rces".
    Repaired "Applications/Utilities/Migration Assistant.app/Contents/Resources/MigrationAssistantUI.bundle/Contents/CodeResou rces".
    ACL found but not expected on "Applications/Utilities/Activity Monitor.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Activity Monitor.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Audio MIDI Setup.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Audio MIDI Setup.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Bluetooth File Exchange.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Bluetooth File Exchange.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/ColorSync Utility.app/Contents/CodeResources".
    Repaired "Applications/Utilities/ColorSync Utility.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/ColorSync Utility.app/Contents/Resources/Calculator.csutil/Contents/CodeResources".
    Repaired "Applications/Utilities/ColorSync Utility.app/Contents/Resources/Calculator.csutil/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/ColorSync Utility.app/Contents/Resources/Devices.csutil/Contents/CodeResources".
    Repaired "Applications/Utilities/ColorSync Utility.app/Contents/Resources/Devices.csutil/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/ColorSync Utility.app/Contents/Resources/Filters.csutil/Contents/CodeResources".
    Repaired "Applications/Utilities/ColorSync Utility.app/Contents/Resources/Filters.csutil/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/ColorSync Utility.app/Contents/Resources/FirstAid.csutil/Contents/CodeResources".
    Repaired "Applications/Utilities/ColorSync Utility.app/Contents/Resources/FirstAid.csutil/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/ColorSync Utility.app/Contents/Resources/Profiles.csutil/Contents/CodeResources".
    Repaired "Applications/Utilities/ColorSync Utility.app/Contents/Resources/Profiles.csutil/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Console.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Console.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/DigitalColor Meter.app/Contents/CodeResources".
    Repaired "Applications/Utilities/DigitalColor Meter.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Grab.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Grab.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Grapher.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Grapher.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Keychain Access.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Keychain Access.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Keychain Access.app/Contents/Resources/Keychain.menu/Contents/CodeResources".
    Repaired "Applications/Utilities/Keychain Access.app/Contents/Resources/Keychain.menu/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/VoiceOver Utility.app/Contents/CodeResources".
    Repaired "Applications/Utilities/VoiceOver Utility.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Podcast Capture.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Podcast Capture.app/Contents/CodeResources".
    Permissions differ on "usr/share/derby", should be drwxr-xr-x , they are lrwxr-xr-x .
    Repaired "usr/share/derby".
    ACL found but not expected on "Applications/Utilities/Boot Camp Assistant.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Boot Camp Assistant.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/AppleScript Editor.app/Contents/CodeResources".
    Repaired "Applications/Utilities/AppleScript Editor.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/AppleScript Editor.app/Contents/PlugIns/DictionaryViewer.seplugin/Contents/CodeResources".
    Repaired "Applications/Utilities/AppleScript Editor.app/Contents/PlugIns/DictionaryViewer.seplugin/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/AppleScript Editor.app/Contents/PlugIns/Library.seplugin/Contents/CodeResources".
    Repaired "Applications/Utilities/AppleScript Editor.app/Contents/PlugIns/Library.seplugin/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/AppleScript Editor.app/Contents/PlugIns/ScriptManager.seplugin/Contents/CodeResources".
    Repaired "Applications/Utilities/AppleScript Editor.app/Contents/PlugIns/ScriptManager.seplugin/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Expose.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Expose.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Remote Install Mac OS X.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Remote Install Mac OS X.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Spaces.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Spaces.app/Contents/CodeResources".
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/CodeResources".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/CodeResources".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/DUSupport".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/DUSupport".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/Resources".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/Resources".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/Versions/A/CodeResources".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/Versions/A/CodeResources".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/Versions/Current".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/Frameworks/DUSupport.framework/Versions/Current".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/PlugIns/ASR.dumodule/Contents/CodeResources".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/PlugIns/ASR.dumodule/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/PlugIns/DFA.dumodule/Contents/CodeResources".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/PlugIns/DFA.dumodule/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/PlugIns/Erase.dumodule/Contents/CodeResources".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/PlugIns/Erase.dumodule/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/PlugIns/Info.dumodule/Contents/CodeResources".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/PlugIns/Info.dumodule/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/PlugIns/Partition.dumodule/Contents/CodeResources".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/PlugIns/Partition.dumodule/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Disk Utility.app/Contents/PlugIns/RAID2.dumodule/Contents/CodeResources".
    Repaired "Applications/Utilities/Disk Utility.app/Contents/PlugIns/RAID2.dumodule/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Network Utility.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Network Utility.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/System Profiler.app/Contents/CodeResources".
    Repaired "Applications/Utilities/System Profiler.app/Contents/CodeResources".
    ACL found but not expected on "Applications/Utilities/Terminal.app/Contents/CodeResources".
    Repaired "Applications/Utilities/Terminal.app/Contents/CodeResources".
    Thanks for looking at this list! I hope something "jumps out" to a more experienced eye!
    Ginny

  • PDF Workstation application

    Dear Friends,
    Till yesterday I could able to view PDF documents. But today I couldn't able to.
    I checked the docuement type, it was checked for KPro.
    I checked for PDF in DC30.
    File suffix for appl. - PDF
    File format - .pdf,.*
    MIME type - application/pdf
    Checked for - Start Authorization , Additional Files and Content version
    Define workstation application in network
    PC PDF 1 EAIWeb.webviewer2D.1 %SAP-CONTROL%
    PC PDF 2 EAIWeb.webviewer2D.1 %SAP-CONTROL%
    PC PDF 3 EAIWeb.webviewer2D.1 %SAP-CONTROL%
    When I am viewing the original redlining function activated, content version- both are  working for this PDF workstation.
    For same doc. type I could able to view for other workstation applications.
    What went wrong ?
    Does any other customization affect this ?
    Regards,
    Sai Krishna

    Hi Pradeep,
    ECL Viewer is working fine. For that reason only I could able to view Auto CAD drawings even though I don't have auto CAd facility in my PC.
    For my understanding how to Reinstall the viewer with the latest version and check.
    Regards,
    Sai Krishna

  • Facebook application is out of order.

    I loaded new update by Facebook application. After then loading, Facebook application has been out of order. O wanna use the application but not open. this application alerts network error

    Here is the link to Apple's Knowledge Base article on troubleshooting portables that won't turn on or start up:
    http://docs.info.apple.com/article.html?artnum=50959
    If nothing there helps, try plugging it in with the adapter and picking it up in your left palm to the left of the trackpad and squeeze the case there between your palm and left thumb as you push the power button. Do not let up the pressure on the case. Continue applying this pressure as for several minutes in an attempt to start up. Does pressure on the case there allow it to start up?

Maybe you are looking for

  • Help in finding the error

    Hi All, I have executed the folloowing scripts create or replace function aj_dump_csv( p_query in varchar2, p_separator in varchar2 default ',', p_dir in varchar2 , p_filename in varchar2 ) return number AUTHID CURRENT_USER is l_output utl_file.file_

  • Pix 8.0(3) - Telnet not working

    Hello, I configured a Pix firewalll for telnet using the command "telnet ip netmask interface_name" but for some reason it does not wokr. i checked the configuration on the firewall and the other device accessing the pix with telnet do not have addit

  • Error: HTTP method GET is not supported by this URL

    Hey, I am attempting to overload the doGet method with a Wrapper class I created for HttpServletReponse that extends it of course and I receive this error: "HTTP method GET is not supported by this URL". I figure you can't change the method as I have

  • Unable to download Adobe Reader Help please

    I just started working at my new job as a receptionist and i am trying to download the adobe reader but after i click on the "RUN" button is asks me for a user name and a password. How can i go about fixing this problem, can anybody help Please?

  • Sorting a vector in ascending order

    Hi I hava a vector that consists of integers. How can I code it in java so that the vectors is sorted in ascending order. thanks