Foreign System Configuration Tab Missing in ConsoleOne

We installed the GroupWise 7 Gateway for Microsoft Exchange SP2 and are trying to configure the gateway. However, we are missing the Foreign System Configuration Tab in ConsoleOne.
We've rerun the install and selected to just install the ConsoleOne snapins, but are still not seeing the Foreign System Configuration tab. I can see the file gwex.jar in the ConsoleOne\1.2\snapins\groupwise folder on the computer I ran the gateway installation from so I think the snapin is installed.
Any help would be appreciated.

olsonjm,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

Product Configurator tab missing in Sales Order in ICWC for complaints

Hello
Our environment - ECC 6.0 & CRM 6.0
We have variant config items created in ECC & downloaded to CRM via Knowledgebase & runtime versions.
The customer service reps place the order via ICWC.
Till now only standard sales orders were being created in CRM ICWC and the Credit Memos were created using Transaction launcher.
Now we are trying to move the creation of Credit Memo's in CRM via the complaints function.
I am running into an issue while testing Variant Config items in a Credit Memo in the ICWC. I get an error saying Configuration for the Item missing. I am not able to find the Configuration tab in the Order.
When I place the same item in a Standard Sales order, the Configuration tab shows up and I can select my option and all works fine.
Is there any setting specific to the transaction types or Item type for a Credit Memo ?
Can anyone let me know what I am missing ?
Thanks in advance
Vinit

Hello Vinit
I will add the most simple case to create a new configuration:
A role configuration key must be created in path
IMG-CRM-UI Framework -- Technical role definition -- Define role configuration key
The role configuration key must be assigned to your business role in
IMG-CRM-UI Framework -- Business roles --Define business role
Then to create the configuration:
Transaction bsp_wd_cmpwb
`component   BT162I_CPL
Btn display
Go to views and double click BT162I_CPL/CreditItemOVViewSet
Tab configuration
New configuration
Role Config. Key     <Your role configuration key>
Component Usage      <DEFAULT>
Object Type          <DEFAULT>
Object Subtype       <DEFAULT>
Type:   Overview page
Then use the arrows to move available assignment blocks to displayed assignment blocks
You can also use load option to decide if the assignment block will be initially displayed or the end user must press one click to display it.
Btn Save
The configuration is saved and will be displayed if you enter the web UI with the business role that was assigned to your role configuration key.
Another option instead of creating a new configuration for the view is to copy the configuration from the standard one and then make changes to it, but I am not sure if it would work in this case because the standard configuration was created before the note had been implemented. For this you should use button "Copy configuration"
Best Regards
Luis Rivera

SCCM Client Configuration Tab missing and actions are also missing

Hello All,
Stuck from few days in installation of Client in Secondary Site. Actions are missing in tab and Configuration Tab is also missing.
1. Boundaries and Boundaries Group are properly configured
1a. Client Push installation is performed through Primary Site
2. Client Push Account has Administrative Rights (Verified from CCM Log file)
3. Installation performed successfully (Verified from Log file)
4. Firewall settings are configured proper.
5. WMI repository is consistent.
6. Machine restart several times but no result
Snapshots are attached for your further reference
Need your suggestions / Help.
REGARDS DANISH DANIE

CCMEval.log File
==========[ ccmeval started in process 2304 ]====================================
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
ccmeval version: 5.0.7958.1000 CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Loading manifest file: C:\Windows\CCM\CcmEval.xml
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Successfully loaded ccmeval manifest file. CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Begin evaluating client health rules. CcmEval
8/22/2014 12:03:32 AM 1620 (0x0654)
Successfully retrieved all client health checks.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {4AB7D77D-3BB0-4EAB-BEFD-7C0F7DA10296} : Verify WMI service exists.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {518C0699-03F8-4F38-85C4-4D319EAEFC05} : Verify/Remediate WMI service startup type.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {7F4B6E15-2221-455B-9615-93C379E470D5} : Verify/Remediate WMI service status.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {14E6774A-1795-4E09-B17D-B6F36A124205} : WMI Repository Read/Write Test.
CcmEval 8/22/2014 12:03:32 AM
1620 (0x0654)
Evaluating health check rule {690A959D-6210-4930-865F-E3BB82F02133} : Verify/Remediate client WMI provider.
CcmEval 8/22/2014 12:03:43 AM
1620 (0x0654)
Evaluating health check rule {A81778B5-9A1E-4A52-9C6E-6939CEFAA118} : WMI Repository Integrity Test.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {5CC6C949-5001-4765-84B4-DD4FDC1E6940} : Verify BITS exists.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {C6E29CF5-F9B2-450B-AE61-C4B256A75023} : Verify/Remediate BITS startup type.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {2F373187-6295-4CBB-BE9E-8E43C459883A} : Verify/Remediate client prerequisites.
CcmEval 8/22/2014 12:03:48 AM
1620 (0x0654)
Evaluating health check rule {AD9CAF50-6602-4857-A9F4-64864EA30BDF} : Verify/Remediate client installation.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {8883C683-04C8-4228-BB76-2EDD666BA781} : Verify SMS Agent Host service exists.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {13F46523-5B82-417d-A363-A644E80CAD76} : Verify/Remediate SMS Agent Host service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {70BECB51-44A1-4b46-8A23-6EA3D345B677} : Verify/Remediate SMS Agent Host service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {C35E790D-4C05-40A8-BB46-A68578966D19} : WMI Event Sink Test.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {0614757F-7AA6-4933-965B-06D6A8243D0B} : Microsoft Policy Platform WMI Integrity Test.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {7EF00FDD-3DF0-496A-A999-AADD1B3016C1} : Verify/Remediate Microsoft Policy Platform Service Existence.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {D9D0245D-0617-4C2F-8837-84A397AC5B22} : Verify/Remediate Microsoft Policy Platform service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {09886543-BE8B-431F-BC00-7D917632E22C} : Verify/Remediate Antimalware service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {5B50566C-363E-4F1C-8A7D-6F2D2A51B142} : Verify/Remediate Antimalware service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {6BC824B4-BD8C-4779-BB10-ABDBCD5AFAEB} : Verify/Remediate Network Inspection service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Failed to get SOFTWARE\Policies\Microsoft\Microsoft Antimalware\Real-Time Protection\DisableIntrusionPreventionSystem
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {D6CB32EA-423D-44CB-9C58-97CE55D2148E} : Verify/Remediate Windows Update service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {E8030BE0-B773-4742-B6A1-0870CF139117} : Verify/Remediate Windows Update service startup type on Windows 8.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {9040BA8C-580D-4FCA-8846-BBD5F5BB1597} : Verify/Remediate Configuration Manager Remote Control service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {9DCD49EF-E021-46FF-A777-49210B558527} : Verify/Remediate Configuration Manager Remote Control service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {934F12E3-295E-4BA0-AE0F-09859685720F} : Verify/Remediate Configuration Manager Proxy service startup type.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {43029EED-EB9D-4E35-A5F7-7FDD93EC8C57} : Verify/Remediate Configuration Manager Proxy service status.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Result: Not Applicable, ResultCode: 0, ResultType: 0, ResultDetail:
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Evaluating health check rule {7B9F8FF6-EDF7-42CA-A67F-073A2E161C19} : Verify/Remediate SQL CE database is healthy.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Successfully evaluated all client health rules.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Fail to get integer from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get MPFailCount from registry, restart counting from 0
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Client is set to use HTTPS when available. The current state is 224.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Client is set to use HTTPS when available. The current state is 224.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:8E1768FD-5FB5-4191-A804-F26D05EB636C";
DateTime = "20140821190415.358000+000";
HostName = "uekkisc001.uead.uep.com.pk";
HRESULT = "0x00000000";
ProcessID = 2304;
StatusCode = 0;
ThreadID = 1620;
CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Client's current MP is http://uekkisc001.uead.uep.com.pk and is accessible
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
MP check succeeded CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Send previous report if needed. CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get time from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Can't determine whether previous sent succeed, assume sent failed
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Fail to get string from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
There is no previous report sent CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Fail to get time from registry CcmEval
8/22/2014 12:04:15 AM 1620 (0x0654)
Can't determine whether previous sent succeed, assume sent failed
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Previous send is not complete, need to send report this time.
CcmEval 8/22/2014 12:04:15 AM
1620 (0x0654)
Begin to send client health status report CcmEval
8/22/2014 12:04:16 AM 1620 (0x0654)
Successfully sent client health status as a state message.
CcmEval 8/22/2014 12:04:16 AM
1620 (0x0654)
==========[ ccmeval finished normally in process 2304 ]==========================
CcmEval 8/22/2014 12:04:16 AM
1620 (0x0654)
REGARDS DANISH DANIE

System Configurator Shortcuts Missing

Just went through installing the Essbase 32bit Client and the EAS 32bit Client on Win 7 64bit OS using Excel 2007. However now when I navigate to Oracle EPM System configurator it says it's missing the 'configtool.bat' file. Where could it have gone? I just re-installed it successfully. Wouldn't it recreate this path and files once I reinstall?

This all may be down to use you using windows 7 64bit.
John
http://john-goodwin.blogspot.com/

"AMT Options" missing from HP 2540p BIOS "System Configuration" tab

I used to have an HP Elitebook 2540p Core i5. I recently got a Core i7 version.
The old machine had an "AMT Options" tab that could be used to set options to make it possible to see the AMT MEBx (Management Engine BIOS Extension) at boot time. This is shown in this picture:
My new Core i7 machine is missing this option, as shown here:
I need this option so I can enable the AMT serial-over-lan feature for debugging.
I updated my BIOS from F09 to F50 (the newest) but the option didn't appear. I went to the "Set Security Level" setting which seems to control what stuff is shown and what isn't. But it didn't have an AMT Options option.
Can anyone tell me how to get this option back? All HP Elitebook 2540p should support AMT right? Because this manual seems to indicate it:
http://h10032.www1.hp.com/ctg/Manual/c02958196.pdf
I also tried doing "Restore Defaults" and "Reset BIOS security to factory default" froim the "File" tab in the BIOS
(Also I tried just hitting ctrl-p repeatedly at boot to try and get into the MEBx but it didn't work
Thanks for any help you can provide (but I know this is a pretty hard/uncommon question)
Jimmy Dean

@jamesdeanthree
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Managed system Configuration : The JMX metrics of this Host / Byte Code Adapter are missing

Hi Friends
While Configuring EP system with SOLMAN 7.1 SP12 it is giving below message in self Diagnosis Phase.
1. Solman system is already having ISAGENT version 8 and 9 installed (but Managed system is having 8)
2. I have followed the automatic Process as below
==========================================
Automated Installation of the Introscope Agent via SMD
The Solution Manager provides an application that performs the setup of the Introscope
byte code agent for Java automatically. This section explains the steps to run the setup.
Before you can run the Introscope agent setup, the setup wizard for the managed system
must have been executed.
1.
2.
3.
4. Launch the Introscope Setup application: SAP Solution Manager Configuration 
Managed Systems Configuration  Step 7 Configure Automatically  Automatic
Activity “Byte Code Adapter Installation”  “Open Java URL” (only available in edit
mode). Your screen will look similar to the image below:
5. Check the Enterprise Manager Settings at the top of the screen. These are the
connection parameters that will be used by the agent to connect to the Enterprise
Manager.
6. In the pane Introscope Agent Setttings, select the system that you want to instrument
with the agent. Check “select all” and click “Retrieve Current Settings”. This will display
the current status of the agent setup.
7. To initially setup or update the agents, click Setup Introscope Agent …. This will open
the setup dialog as shown below. Select the desired agent version (by default only one
available) and choose the profile. Next, check the desired instrumentation areas, and,
in the case of AIX, review the AIX settings to match your environment (J9 or classic
mode).
8. Finally, hit Apply to perform the necessary changes in the agent configuration. Agent
config files will be adapted and the Java VM parameters will be set as required for the
managed system.
================================================================
3. Restarted SAP but error still present.
Please help to resolve the issue.
Thanks

Found the solution :
1819577 - Workload Analysis data missing for Java systems when using ISAGENT 8.2.4.0
Cause
l This issue has been identified as product defect and documented in note 1273028
Resolution
l As mentioned in note 1273028, update to ISAGENT 8.2.4 Patch 1 timestamp: 2012-06-26, please proceed as described below)
1. Enable the Maintenance Mode in the Agent Administration UI (http://solmanserver:port/smd/AgentAdmin)
2. Deploy the file to the Solution Manager JAVA stack using the Software Deployment Manager (SDM)
3. Disable the Maintenance Mode in the Agent Administration
4. Execute again the activity 'Byte Code Adapter Installation' of the step 'Configure Automatically' in the 'Managed System Configuration' for the
affected systems. This activity will deploy the new version of the
Introscope JAVA agent in the managed system servers and reconfigure the JVM parameters to use the new version of Introscope JAVA
Agent;
5. Check from Introscope Agent Admin if "IS Agent State" contains value "Running but needs restart"
6. Restart the affected managed system(s)
Finally Solution is update your SOLMAN system patch ISAGENT 8.2.4.0 from patch 0 to 1 via SDM.
Thanks
Mukesh

Missing System Protection Tab in Window Server 2008 R2 Standard

Hi All,
Actually I want to disable and enable the system store in Window Server 2008 R2 Standard. When I right click for My Computer and click "Properties", "System Protection" is missing. I have searched a lot of solutions on Internet but still
not working. Please advise and thanks.
Methods which I have tried:
1. sfc /scannow (Not Work)
2. HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\WindowsNT\SystemRestore\DisableSR (No such regedit)
3.
dism /online /enable-feature /featurename:WindowsServerBackup   (Not Work)
     dism /online /enable-feature /featurename:WindowsServerBackupCommandlet
     shutdown -r
Best Regards,
Alan

Hi,
Firstly, please make sure that you have logged into the computer as an administrator. In addition, can you see the
System Protection tab in safe mode? You can also perform a
full scan of your system to see if any malware removed the the "System Protection" tab.
Besides, you can check the registry below:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\SystemRestore
If a "DisableSR" value doesn't exist, you can add it and set the value to 0 to enable System Restore to see if the issue persists.
Best regards,
Susie

CRM IMG nodes are missing in SOLAR01 - configuration Tab

hi Experts
i am facing very strange issue. I am trying to link IMG nodes from the backend system in configuration tab.
the IMG nodes are available in backend system from SPRO , whereas when i try to add the IMG object from the configuration Tab in solar01, these nodes are not available for the selection.
Does any body faced these kind of situation.
Please help with the solution
Thanks
Sol man

Hi,
Make sure that those nodes are selected in the IMG project scope. This can be seen at SPRO_ADMIN for the IMG project, under tab "scope".
If the nodes are not selected, select them and generate the project IMG.
best regards,
Fabricius

Missing the qttask in system configuration utilities

missing the qttask in system configuration utilities

Do you have a copy of the QuickTime Player installed at the moment? (It's not included in iTunes 10.5.x installers.)

Missing Resource & Configuration Tab

I just installed indentity manager and trying to follow admin guide to pick it up. I dont see Resource or Configuration tabs as shown in the guide. I need to configure a resource adapter to sun directory and test it. I followed everything in insall docs. Is there anything i need to do to get these two tabs. I login using the default Administrator account.
Any help would be greatly appreciated.
Thanks

You have to login as default configurator not as administrator. username:configurator default password:configurator

CHANGE REQUESTS tab missing under SOLAR_PROJECT_ADMIN

Hello All,
Am trying to configure CHARM in our SolMan system. I referred to the below link for configuration.
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
I am trying to create a project under tcode: SOLAR_PROJECT_ADMIN
while creating project with in SYSTEM LANDSCAPE tab we can see FOLLOWING
SYSTEMS /\ CENTRAL OBJECTS /\ IMG PROJECTS .
But am unable to see CHANGE REQUESTS tab which should be at last in the above mentioned sequence .
can any 1 tell me why its not there. Do i need to configure anything more to get the CHANGE REQUESTS tab
Regards,
Ravi

Hello,
i had the same problem few weeks ago. I couldn't find the Change request Tab in Solar_project_admin
I fixed it by following : SAP note : 802793
The note explain how to re assign the client to manage change request management.
We folow the note, then the missing tab appear
Regards

Tab missing

I have firefox 9.0.1 and sometimes when I open firefox (open old session) first tab is invisible. It doesn't show in tab bar, but show all tabs -button lists it. also, I can go there via ctrl + tab.
When I close and re-open (ctrl + shift + t) it shows fine.
However, now my app tab is gone missing. How can I see it again? And why does it do that?
http://oi40.tinypic.com/25s8wva.jpg
Picture about situation.

Hi Prakash,
If you are trying to create project cycles with /TMWFLOW/CMSCONF-> Distribution Routes-> Project environment, go to SOLAR_PROJECT_ADMIN -> System landscape-> Project cycles. With Release 4.0, some functions that existed in 3.20 outside of the original tools of the Solution Manager have been reintroduced.
If you need to go to Transport Domains and to navigate to TMS system configuration, go to Transaction SMSY-> Environment -> Domain Controller Overview.
If you need this tab for other function, let us know.
Regards,
Raquel Cunha.

Extended Attribute tab missing

Hi,
In my development server the extended attribute tab is missing,
Is there any configuration I missed?
How can I extend my attributes in PPOMA_BBP
Thanks
Suds

Hi Muthu,
I am facing the same issue. .
Regarding authorization, I have got myself SAP_ALL in the dev system and still do not have the Extended Attributes tab.
Thanks for the link to the post too. As mentioned in the post, the address tab is controlled by IT1028. Can someone please let me know what Infotype and parameters control the Extended Attributes tab?
Thanks,
SB

Dashboard user tabs missing

I have just upgraded to IDM 8 and have the following form mapping configuration, endUserMenu of 'End User Dashboard' and endUserAppMenu of 'End User Navigation'. For some reason, when i logged into the user interface the dashboard tabs are missing (i.e. Home, Work items, Requests, Delegations, Profile). I can see everything else except for the tabs. Any idea how to enable the tabs?

You may want to check the system configuration object to see what exactly being loaded on the User interface.
-sFed

Problems With System Configuration

System Configuration is altered and not repairable. Selective startup is persistent. Normal startup is selected, but the Apply button is greyed out, inaccessible, and system always remains in Selective startup. As a result, Current User profile is probably
corrupted. Windows Store will not install (services are corrupt, SFC and DISM did not work). Outlook profile was deleted, needed to be reinstalled, and can not receive mail. Excel math engine totals values higher than actual amounts. IE automatically signs
into all Microsoft accounts (reset to default settings worked for a log on, but automatic sign in resumed afterwards).
Are there any solutions?
Office diagnostics produced the following report.
Diagnostic Results
None of the Microsoft Office Diagnostics found any problems.
More resources
Setup Diagnostic — File corruption or altered file
The Setup Diagnostic repaired problems with your installation of Microsoft Office. Your Microsoft Office programs should now function correctly.
If your Microsoft Office programs continue to crash, the source of the problem may be a hardware failure or hardware configuration problem. Review the results of the Disk and Memory Diagnostics to determine if a hardware failure is affecting your installation
of the 2007 Office release.
More resources
Setup Diagnostic — Missing media
The Setup Diagnostic was not completed because a valid source was not found. Either the local installation source is missing, or the original source that was used to install Microsoft Office is not available to the repair process. You may need to provide
the original source to allow this diagnostic to run successfully. Valid sources for the 2007 Office release include the following:
Your 2007 Office release installation CD
An installation disk or repair CD provided by the vendor of your computer
A connection to a network installation of the 2007 Office release
After you obtain access to a valid source, run Office Diagnostics again.
More resources
Disk Diagnostic — Failure of hard disk predicted
The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors that may indicate that the hard disk is likely to fail. SMART is a feature that some disk drive manufacturers provide to give users advance notice
of potential hard disk failure. Instability in your Microsoft Office programs may be the result of these hard disk drive errors.
Note This result can indicate a severe problem, but some hard disks may not accurately report their results.
We recommend that you do the following:
1.Back up your important data immediately.
2.Check the results of other diagnostics, and follow the instructions for resolving any issues that the other diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
3.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
More resources
Disk Diagnostic — Errors in system event log
The Disk Diagnostic found evidence of hardware errors. Instability in your Microsoft Office programs may be the result of these hardware errors.
This result occurs if one of the following has happened recently:
The Self-Monitoring, Analysis, and Reporting Technology (SMART) feature of your hard disk has found errors. SMART is a feature that some disk drive manufacturers provide to give users advance notice of potential hard disk failure.
Microsoft Office Diagnostics has found blocked-out (failed) sectors on your hard disk.
Microsoft Office has had trouble accessing files from the hard disk; it needs these files to function properly.
We recommend that you do the following:
1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Disk Diagnostic issue is resolved.
2.If you continue to get this result, contact someone, such as the vendor of your computer or hard disk.
More resources
Memory Diagnostic — RAM failure
The Memory Diagnostic found evidence of failure in the random access memory (RAM).
We recommend that you do the following:
1.Check the results of other diagnostics, and follow the instructions for resolving any issues that the diagnostics have reported. After you resolve those issues, run Microsoft Office Diagnostics again to see if this Memory Diagnostic issue is resolved.
2.If you continue to get this result, do either of the following:
Run a Microsoft Windows memory diagnostic. For more information, see the following:
Windows Vista How do I know if my computer has a memory problem?
Microsoft Windows XP Windows Memory Diagnostic
Contact someone, such as the vendor of your computer or RAM.
More resources
Memory Diagnostic — User is not an administrator
The Memory Diagnostic was unable to run because you do not have administrative rights on this computer. To successfully run the Memory Diagnostic, someone with administrative rights must log on to this computer and run Microsoft Office Diagnostics.
More resources
Update Diagnostic — Installation is out of date
The Update Diagnostic determined that your installation of Microsoft Office does not have the latest service packs installed. Installing service packs improves stability. We recommend that you visit Downloads on Microsoft Office Online, and then, under Office
Update, click Check for Updates.
More resources
Compatibility Diagnostic — Conflicting versions of Outlook found
The Compatibility Diagnostic identified conflicting versions of Microsoft Office Outlook. To remove the version of Outlook from your computer that you do not want, do the following:
Microsoft Windows Vista
1.Click the Start button, and then click Control Panel.
2.Click Uninstall a program.
Note In Classic view, double-click Programs and Features.
3.Select the version of Outlook that you do not want, and then click Uninstall.
Microsoft Windows XP
1.Click Start, and then click Control Panel.
2.Double-click Add or Remove Programs.
3.Select the version of Outlook that you do not want, and then click Remove.
More resources

Check disk and memory diagnostics found no errors.
SFC and DISM listed errors when performed in diagnostic start up. Commands changed from previous attempts. Before SFC and DISM only had to be entered as SFC and DISM. Presently, additional commands are required.
Log Name:      Microsoft-Windows-MemoryDiagnostics-Results/Debug
Source:        Microsoft-Windows-MemoryDiagnostics-Results
Date:          8/21/2014 12:51:09 PM
Event ID:      2001
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:      TAS
Description:
Windows Memory Diagnostic results
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-MemoryDiagnostics-Results" Guid="{5F92BC59-248F-4111-86A9-E393E12C6139}" />
    <EventID>2001</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x4000000000000000</Keywords>
    <TimeCreated SystemTime="2014-08-21T16:51:09.612555200Z" />
    <EventRecordID>1</EventRecordID>
    <Correlation />
    <Execution ProcessID="5296" ThreadID="5300" />
    <Channel>Microsoft-Windows-MemoryDiagnostics-Results/Debug</Channel>
    <Computer>TAS</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <Results xmlns="http://manifests.microsoft.com/win/2005/08/windows/Reliability/Postboot/Events">
      <MemDiagRawData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emDiagRawData>
    </Results>
</UserData>
</Event>
Windows Resource Protection could not start the repair service.
Microsoft Windows [Version 6.3.9600]
(c) 2013 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>DISM
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
DISM.exe [dism_options] {Imaging_command} [<Imaging_arguments>]
DISM.exe {/Image:<path_to_offline_image> | /Online} [dism_options]
         {servicing_command} [<servicing_arguments>]
DESCRIPTION:
DISM enumerates, installs, uninstalls, configures, and updates features
and packages in Windows images. The commands that are available depend
on the image being serviced and whether the image is offline or running.
GENERIC IMAGING COMMANDS:
/Get-MountedImageInfo   - Displays information about mounted WIM and VHD images.
/Get-ImageInfo          - Displays information about images in a WIM or VHD file.
/Commit-Image           - Saves changes to a mounted WIM or VHD image.
/Unmount-Image          - Unmounts a mounted WIM or VHD image.
/Mount-Image            - Mounts an image from a WIM or VHD file.
/Remount-Image          - Recovers an orphaned image mount directory.
/Cleanup-Mountpoints    - Deletes resources associated with corrupted mounted images.
WIM COMMANDS:
/Capture-CustomImage    - Captures customizations into a delta WIM file on a WIM Boot system. Captured directories include all subfolders and data.
/Get-WIMBootEntry       - Displays WIMBoot configuration entries for the specified disk volume.
/Update-WIMBootEntry    - Updates WIMBoot configuration entry for the specified disk volume.
/List-Image             - Displays a list of the files and folders in a
                            specified image.
/Delete-Image           - Deletes the specified volume image from a WIM file
                            that has multiple volume images.
/Split-Image            - Splits an existing .wim file into multiple
                            read-only split WIM (SWM) files.
/Export-Image           - Exports a copy of the specified image to another
                            file.
/Append-Image           - Adds another image to a WIM file.
/Capture-Image          - Captures an image of a drive into a new WIM file. Captured directories include all subfolders and data.
/Apply-Image            - Applies an image.
/Get-MountedWimInfo     - Displays information about mounted WIM images.
/Get-WimInfo            - Displays information about images in a WIM file.
/Commit-Wim             - Saves changes to a mounted WIM image.
/Unmount-Wim            - Unmounts a mounted WIM image.
/Mount-Wim              - Mounts an image from a WIM file.
/Remount-Wim            - Recovers an orphaned WIM mount directory.
/Cleanup-Wim            - Deletes resources associated with mounted WIM images that are corrupted.
IMAGE SPECIFICATIONS:
/Online                 - Targets the running operating system.
/Image                  - Specifies the path to the root directory of an offline Windows image.
DISM OPTIONS:
/English                - Displays command line output in English.
/Format                 - Specifies the report output format.
/WinDir                 - Specifies the path to the Windows directory.
/SysDriveDir            - Specifies the path to the system-loader file named BootMgr.
/LogPath                - Specifies the logfile path.
/LogLevel               - Specifies the output level shown in the log (1-4).
/NoRestart              - Suppresses automatic reboots and reboot prompts.
/Quiet                  - Suppresses all output except for error messages.
/ScratchDir             - Specifies the path to a scratch directory.
For more information about these DISM options and their arguments, specify an option immediately before /?.
Examples:
    DISM.exe /Mount-Wim /?
    DISM.exe /ScratchDir /?
    DISM.exe /Image:C:\test\offline /?
    DISM.exe /Online /?
C:\WINDOWS\system32>DISM.exe /English
Deployment Image Servicing and Management tool
Version: 6.3.9600.17031
Error: 1639
No DISM options were specified on the command-line.
Run DISM with a command-line option specified, such as /Image or /Online. For more information, refer to the help by running DISM.exe /?.
The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log

Foreign System Configuration Tab Missing in ConsoleOne

Similar Messages

Maybe you are looking for