Foreign Tade: Import, Export & Control
Hi Experts,
Can any one please input me the step by step IMG settings for Foreign trade Import & Control.
Thanks in Advance, Suresh
Hi,
Refer
http://help.sap.com/saphelp_47x200/helpdata/en/93/74440d546011d1a7020000e829fd11/frameset.htm
Go to SPRO > MM > Purchasing > Foreign Trade/Customs > Control Foreign Trade Data in MM and SD Documents
Incompleteness Schemas for Foreign Trade Data (VI29)
Here you can define Incompleteness procedures and include fields which you want and keep field control as "3" i.e. Required field - Incompletion check active
Foreign Trade Data in MM and SD Documents (VI49)
Here you can assign the incompleteness procedure to Country Key.
Import Screens In Purchasing Document
Here for your Company Code, keep Import Data as "1" i.e. Call up import data screens for every import or "3" i.e. Always call up import data screen
Check in ME21N.
Thanks & Regards,
Kiran
Similar Messages
-
Foreign trade import/export data is getting copied when creating MMR
Hi,
When trying to create material master record with reference material ,the" Foreign trade import/export data " is not available in selection but the material is getting created with the "foreign data".
When to restrict so that the material master record gets created without "foreign trade data"
Thank you.HI,
When u enter the new material,matl type & industry u enter the reference material and press enter then it shows the select views screen in this deselect the foreign trade tab and press enter then create material.The foreign data tab will not be copied in the new material.
murugan -
Foreign Trade Import/Export Tab in Material Master of SAP R/3
Hi
What is the use of Foreign Trade Import/Export Tab in material master of SAP R/3Hi Akhil ..
Sounds like you need to enrol for the SAP Foreign Trade training course!
The tab holds various attributes for determining Foreign Trade data - for example the Customs classification and Country of Origin. Those data are used to determine and/or populate fields in the Foreign Trade data when processing MM and SD documents.
Some, but not all, of the fields in that tab become redundant if GTS is in use.
If you have more specific questions in this area, it might be easier to give better explanations.
Regards,
Dave -
Exporting and Importing Destination Controls Error
When I export table within destination control and import the table to another Ironport again within destination control I receive error - "Wrong format of the destination config file: ip_sort_pref is required for the global settings."
We are updating the ASYNC on each of our de clustered Ironport. So when one is not in use we need the other to handle all the traffic, including domain controls.
The output displays
[ABCDE.com]
max_host_concurrency = 500
limit_apply = system
limit_type = host
max_messages_per_connection = 50 ......
How can I import this without losing or altering the data within.
^^^^^^^^^^^^^^^^^^^^^^
Solution
We upgrade one of our SMTP ASYNC to 8.0.1 which creates a additional line within default of the upgraded Ironport exported control destination table that is named... wait for it.... ip_sort_pref. Just add it.The applications and drivers have been imported into the Dev SCCM server however I cannot find the actual content so I am not sure this has worked properly.
When you exported did you choose to "Export all content for selected task sequence and dependencies".
80070003 = The system cannot find the path specified.
See here for exporting and importing task sequences
http://blogs.technet.com/b/inside_osd/archive/2012/01/19/configuration-manager-2012-task-sequence-export-and-import.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Control Code field in Material master- Foreign Trade imports tab
Hello Experts,
I am trying to understand the purpose of Control Code(MARC-STEUC) field in Material master- Foreign Trade imports tab. I am also interested in knowing where does this field appear in our PO.
Please help..
ManishNormally control code specifies the norm to follow by the supply plant for a sale of exposrts. each contry will have a set of rules to get follow as a stuatory . this code specifies the rules or certificates.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/93/7443a5546011d1a7020000e829fd11/frameset.htm
may be comes in a sale order.
Regards -
Import/Export Legal Regulation Control w/ One Legal Regulation
Hi,
In a separate thread, Dhillipan helped me configure a legal regulation using Country/Country Group (config activity: Activate Legal Regulations at Country/Country Group Level) which was very helpful to restrict Sales Orders / Deliveries from a specific country to a specific country group. In addition to those export documents, I would also like to use the same legal regulation to prevent the export of inter-company purchase orders (import document) from Country BE to any country in the world. I assume I would have to reverse my logic and prevent the export of Product 123 from any country in the world to Country BE.
What are some suggestions to leverage the existing legal regulation for both import and export control from/to BE?
For instance...
Sales Orders / Deliveries:
Product 123 cannot be exported from BE to RU, AR and US, but can be exported to any other country using sales orders/deliveries (this has already been configured)
Purchase Orders (Inter-Company):
Product 123 cannot be exported from BE to RU, AR and US, but can be imported to any other country using I/C purchase orders.
Thanks for your help.Hi Chris,
Just to make sure my understanding is right. You need same kind of export check for Inter-company Purchase orders right? the same kind of check that we had configured for SO and Deliveries?
In standard all purchase orders are considered under Application level MM0A, which will be shown under Legal Control Import for Imports check. Relevant outbound deliveries will be used for export check.
So, performing export check on PO is not possible when you have this in MM0A level. There is a note available to alter the application level for I/C POs from MM0A to SD0A. But I don't think you should think of it just considering this particular requirement. But I believe your requirement will be taken care when a delivery is created for your I/C PO- Did you check that already?
But you may give a try with following settings for the same legal regulation in addition to whatever you have setup for export.
Country Group for RU, AR and US- Which u had created already. Activate imports check for same legal regulation at Country Group/Country level.
LR1
ZGRP1 --- Not activated for Import
BE- Activated for Import.
This way, your STO will be blocked when there is an Import to RU, AR and US from Belgium. I assume this is what you needed.
As you know, you will need this strategy added in your determination procedure. Just ensure there isn't any impact to the existing SO/Del level checks.
Please try this once in sandbox. I haven't checked this in system like last time. So, I am not 100% sure this will work.
Regards
Dhilipan -
Foreign trade:export and foreign trade:import
hi
i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:import views in material master record.
Ex
scenario:- if i am importing a material from india and export the same to china.
Edited by: RajKiran Mohanty on Aug 20, 2008 1:44 PM
Edited by: RajKiran Mohanty on Aug 20, 2008 1:44 PMthe material that you import from india to export to China will not change its origin during this transition.
It the origin is India, it is still India even you export it from Singapur to China.
If you import this material from several sources and each has a different country of origin, then you can manage this only with batches, as you can maintain the CoO in the batch. -
Export Control /Legal control: need user exit to customize
I have a situation where I want to determine the export control license for a sales order. SAP uses the function module RV_EXPORT_CONTROL to carry out the required check.
The FM uses the country defined for the ship-to-party as the destination country and carries out checks to determine if there is an embargo for the good in the line item to destination country.
My requirement is that the actual destination country or the ultimate destination country ( which is known and not same as the country of the ship to party ) be used to carry out the embargo check.
I could not find any user exit/badi for the same. Is there a way to achieve this functionality. It has been hard coded in the FM. Can we do any customizing settings to achieve this? I could find two partner function EU ( End user for foreign trade ) and UC ( Ultimate Consignee )...can these be somehow used/ configured to achieve the desired functionality? Or is there any other different approach to the issue.
Currently I plan to copy the standard FM and add my functionality. I will turn off the standard export control and then I i will call the custom FM in the end ( userexit_save ) as the export control is carried out at save.
Any suggestion/approaches will be appreciated.I too have same issue, from where the Fm RV_EXPORT_CONTROL is triggering
Edited by: erakarthi on Jul 14, 2011 8:44 AM -
Error import / export in console standalone
hai all,
error import / export in console standalone
iam logged in 9i console standalone pc not connected any other pc.
unable to import or export or load any database
because the error shows that
only on OMS mode is possible
how can import or export or load?
any help?
thanks in advance
rcs
------I have no idea what you are asking or in what environment you are work.
Lets start with the need for a version number ... 9i is not a version ... it is a marketing label. Do you mean 9.0.? or 9.2.0.1 or 9.2.0.8 no one knows.
Second I have no idea what a you intend to convey with the statement "console standalone pc."
Third "unable" means what? That the pc crashed and burned and is a smoldering cinder or you received some error message you thought too unimportant to post? Again ... you've given us no useful information.
Finally what do you mean by OMS? Is this OMS as in the Java application running as part of the Grid Control or something else?
Finally what are you trying to import? How? A clear explanation is required.
If someone reading what you post can not understand or duplicate what you did because of lack of information you will not receive any help. -
Error in Excise Data subscreen in Material Master:Foreign Trade-Import Data
SAP Net Weaver ECC6.0
I have added the 'Excise data' subscreen in Material master 'Foreign trade IMport' and 'Foreign Trade Export' tab. But facing the following problem. please help.
There are two buttons called 'More' and 'PreVals' in that subscreen. If I click either of them, it gives an error message as below
"Record 21 MORE does not exist in table T133E
Message no. M3748"
and
"Record 21 J1PR does not exist in table T133E
Message no. M3748"
Kindly help what to doOK
Lets starts from first step.
Go to OMT3B
1. Copy 21 and make it 91
2. Then from left hand side select Data screens no 15 copy it and make it 91 - Z1
3. Then again go to left hand side Subscreens and copy 6 and make it 91 - 71 - z and assign screen no 2205 and add prograne as SAPLJ1I_MATERIAL_MASTER
save it
Then go to OMBt3E and copy 01 -* HERS * 12 and mahe it 01 -* ROHor FERT * 91 and save it and then check and revert back
regards -
Import Export Healthcare Endpoints
Hi,
I am currently exploring the healthcare pack for the Oracle SOA Suite Integration. While doing several POC's I often come across the need to somehow import/export the created healthcare endpoints onto some other SOA server, but everytime I have to create them on the different server. Is there a way to import/export the endpoints across different SOA servers?
Thanks!Hi,
It seems that there might be some problem with the specific machine.
In order to be sure, just login as an administrator onto the machine, and check to be sure, whether it is an issue with rights.
However, if it is not the issue with the rights, then we can just reinstall Designer and check whether the issue has been resolved or not.
To do this, just go into your control panel and in the Add & Remove programs, click BusinessObjects and click on change, and then select Modify, expand the client components ,and select Desktop Intelligence : "Entire Feature will be unavailable" and continue with the uninstallation.
The next time around, perform the same steps, and then select DeskI and "Entire Feature will be installed on local hard drive" , and finish the installation.
This would reinstall the designer.
-Shreyash. -
Import/export volume to different administrative server
Hi everyone,
i'm testing the OSB software for DR environments. Now i want to export volume since main administrative server and import volume to different admin server. When I run export command, it shows me "Error: can't execute command - ran out of import/export elements"
ob> lsvol -L pLib1 --long
Inventory of library pLib1:
in 1: volume MONTH_ORAFS-000001, barcode 000011L4, oid 102, 706599936 kb remaining, expires 2011/03/18.10:19, mediainfo hw encryptable
in 2: vacant
in 3: volume DAY_FS-000001, barcode 000013L4, oid 111, 774944768 kb remaining, expires 2012/03/09.13:28, mediainfo hw encryptable
in 4: vacant
in 5: vacant
in 6: vacant
in 7: vacant
in 8: vacant
in dte: vacant
ob> exportvol -L pLib1 -v DAY_FS-000001
Error: can't execute command - ran out of import/export elements
can you help me, please?
Thanks!!Rich,
the import tape catalog with the identifyvol --import command was fine. Now, when i run a restore oracle database_test with the imported catalog show error media manager.
ob> lssection -v WEEK_ORA-000001
322 WEEK_ORA-000001 196 1 0 database_test.bos.local 02/28.17:02
323 WEEK_ORA-000001 197 1 0 database_test.bos.local 02/28.17:09
324 WEEK_ORA-000001 198 1 0 database_test.bos.local 02/28.17:16
325 WEEK_ORA-000001 199 1 0 database_test.bos.local 02/28.17:17
326 WEEK_ORA-000001 200 1 0 database_test.bos.local 02/28.17:18
my RMAN catalog show the backup
BS Key Type LV Size Device Type Elapsed Time Completion Time
9898 Incr 0 128.00K SBT_TAPE 00:06:43 2011-02-28 17:17:11
BP Key: 9907 Status: AVAILABLE Compressed: YES Tag: TAG20110228T170322
Handle: *0am5qik4_1_1* Media: WEEK_ORA-000001
SPFILE Included: Modification time: 2011-02-23 13:24:54
SPFILE db_unique_name: database_test
Control File Included: Ckp SCN: 989240 Ckp time: 2011-02-28 17:10:28
RMAN> restore spfile to '/home/oracle/';
Starting restore at 2011-03-01 18:21:01
allocated channel: ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: SID=96 device type=SBT_TAPE
channel ORA_SBT_TAPE_1: Oracle Secure Backup
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=127 device type=DISK
channel ORA_SBT_TAPE_1: starting datafile backup set restore
channel ORA_SBT_TAPE_1: restoring SPFILE
output file name=/home/oracle/
channel ORA_SBT_TAPE_1: reading from backup piece 0am5qik4_1_1
channel ORA_SBT_TAPE_1: ORA-19870: error while restoring backup piece 0am5qik4_1_1
ORA-19507: failed to retrieve sequential file, handle="*0am5qik4_1_1*", parms=""
ORA-27029: skgfrtrv: sbtrestore returned error
ORA-19511: Error received from media manager layer, error text:
sbtrestore: piece '0am5qik4_1_1' does not exist in the backup catalog.
thanks so much! -
Import/Export from Betacam SP to FCP
I have been contacted to make minor edits to a program for broadcast. The program is on Betacam and I plan to import the footage using a Sony Betacam SP UVW-1600 plugged into an ADS Pyro AV Link Bidirectional DV Media Converter connected via firewire to a Mac Pro with FCP, make the edits and then export back to Betacam via the same route. Can this be done the way I have planned? If so are there any changes I need to make to the video before it is exported (timecode, etc.) for broadcast?
This is not something we normally do and the import/export makes sense the way I have planned it out. But I have learned with video and all the various formats that it is usually never as easy as it seems.
Any help or advice is appreciated.
Thanks,
LeonThis isn't the best way...it really isn't. You are converting the beta footage to DV when you go through the Pyro...then editing it in a 720x480 space instead of 720x486...then you will be sending that back out to Beta...and now will have vertical blanking where you are missing 6 pixels...and your quality will really suffer...and might no longer pass QC.
Then you have to figure out how you will do deck control...you will need a USB>RS-422 adapter.
You really need to get a capture card. The Decklink Extreme can be had for $995 and does SD and now prepares you for HD work...as it does HD too. Decklink does have cheaper SD only cards, as does AJA...but since the world is moving HD, it is time to get prepared for that.
Shane -
How to import/export from d2k
hi
hi please could you help me in how to import/export from d2k.
M.P.Kiran KumarFUNCTION open_ldr RETURN varchar2 IS
out_file Text_io.File_Type;
v_filename varchar2(255);
Begin
out_file := Text_IO.Fopen('C:sqlldr.ini', 'R'); /* create a file so that u can store sqlldr path first time it wont be there so write the path after verifying */
text_io.get_line(out_file,v_filename);
--message(v_filename);
return(v_filename);
Exception when others then
--message('Check For Sqlldr73.exe or Sqlldr*.exe');
v_filename := get_file_name(File_Filter=>'sqlldr Files (*.exe)|*.exe|');
out_file := Text_IO.Fopen('C:\sqlldr.ini', 'W');
Text_IO.Put(out_file,v_filename);
Text_IO.Fclose (out_file);
if v_filename is null then
Message('Please Select The Sqlldr Path ');
Message('Please Select The Sqlldr Path ');
raise form_trigger_failure;
end if;
return(v_filename);
End;
Declare
The_userid varchar2(100):='';
The_Password varchar2(100):='';
The_connectstring varchar2(100):='';
Con_Info varchar2(100):='';
the_command varchar2(200):='';
v_filename varchar2(100);
cursor c1 is select tname from <table_name > /* create a table in ur schema and put all the tables which u want to export */ where tabtype = 'MASTER';
Begin
v_filename:=open_ldr;
The_userid := Get_Application_Property(UserName);
The_Password := Get_Application_Property(Password);
The_connectstring := Get_Application_Property(Connect_String);
Con_Info := The_userid||'/'||The_Password||'@'||The_connectstring;
for c1rec in c1 loop
C2K_TRUNC_HLL_MASTERS(c1rec.tname);
the_command := v_filename||' Control=c:\'||c1rec.tname||'.ctl userid='||Con_Info; -- Change This According To The Path
-- message(the_command);message(the_command);
Host(the_command);
End Loop;
the_command := v_filename||' Control=c:\control'||'.ctl userid='||Con_Info; -- Change This According To The Path
host(the_command);
Exception When Others Then
Message('Error'||' '||sqlerrm);
Message('Error'||' '||sqlerrm);
End;
If u have any problems please contact me on [email protected]
furnish the details properly .
-
How to import/export value for ekko-netwr
Hi friends,
amount value 'ekko-netwr' from incude LV61AA43 should pass to include LV61AA43 for this iam using import/export paramters but there is no parameter id for netwr . How can i pass this amout to this rountine.
Thank u ,
prasad.hi,
A simple example of ABAP memory is using the EXPORT/IMPORT statements.
Here in this program, I get the data, export it to memory,
clear out the internal table in my progam, then reimport the data into it and write out the data.
You probably wounldn't do this in a normal program,
but this is how you can pass data from program a to program b when A Submits program B.
report zxy_0002 .
data: it001 type table of t001 with header line.
select * into table it001 from t001.
export it001 = it001 to memory id 'ZXY_TEST'.
clear it001. refresh it001.
import it001 = it001 from memory id 'ZXY_TEST'.
loop at it001.
write:/ it001-bukrs, it001-butxt.
endloop.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access.
You can use SAP memory either to pass data from one program to another within a session,
or to pass data from one session to another.
Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters).
These parameters can be set either for a particular user
or for a particular program using the SET PARAMETER statement.
Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement.
The most frequent use of SPA/GPA parameters is to fill input fields on screens
ABAP/4 Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access
using the EXPORT and IMPORT statements.
Data within this area remains intact during a whole sequence of program calls. To pass data
to a program which you are calling,
the data needs to be placed in ABAP memory before the call is made.
The internal session of the called program then replaces that of the calling program.
The program called can then read from the ABAP memory.
If control is then returned to the program which made the initial call, the same process operates in reverse.
SAP memory
The SAP memory, otherwise known as the global memory,
is available to a user during the entire duration of a terminal session.
Its contents are retained across transaction boundaries as well as external and internal sessions.
The SET PARAMETER and GET PARAMETER statements allow you to write to, or read from, the SAP memory.
ABAP/4 memory
The contents of the ABAP/4 memory are retained only during the lifetime of an external session
(see also Organization of Modularization Units).
You can retain or pass data across internal sessions.
The EXPORT TO MEMORY and IMPORT FROM MEMORY statements allow you to write data to, or read data from, the ABAP memory.
ABAP Memmory & SAP Memmory
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
http://www.sap-img.com/abap/type-and-uses-of-lock-objects-in-sap.htm
Set
http://www.geocities.com/SiliconValley/Campus/6345/set_para.htm
GET
http://www.geocities.com/SiliconValley/Campus/6345/get_para.htm
EXPORT
http://www.geocities.com/SiliconValley/Campus/6345/export01.htm
Other Imp Help
http://www.geocities.com/SiliconValley/Campus/6345/abapindx.htm
Thanks & Regards
ilesh 24x7
Maybe you are looking for
-
hi friends, for the item in sub contract change process lcop is done. so this is marked as completed and new line item is created with the all the changes is required. but using this new item i need to find the old sub contract item. can anyone
-
Using OLE for download MS-Word
Hello, can I use a MS-Word Template while creating an word obejct to write on the template I mean here--> CREATE OBJECT gs_word 'WORD.APPLICATION'. "Create word object Thank you
-
$server->listMethods() returns this: Array ( [0] => getUser [1] => getPrivateData [2] => getSelectedProducts [3] => Model.selectProducts ) The last method is Model.selectProdocts. How do I call it in Flex?
-
Thanks.. SQL> define TNAME='PATIENT_AUD' SQL> define CNAME='AUD_CREATED_TS' SQL> define MINGAP=10 WITH aquery SQL> 2 AS (SELECT &cname after_gap ,LAG (&cname, 1, 0) OVER (ORDER BY &cname) before_gap FROM &tname) 3 4 5 SELECT before_gap, after_gap, (a
-
Showing formatting in an unsaved calculated field.
I have a form that takes entered criteria and outputs a calculated field based on what is put into the fields. Nothing is ever saved. Choosing the formatting does not work. How can I show the calculated field formatted as currency ($) even though it