Foreign trade data cannot be maintained in Billing Cancellation (S1)

I am trying to release to accounting a S1 document, but I am getting a foreign trade data error.
I went to maintain the header foreign trader data of the billing cancellation document (S1), but this section is grayed out
and the system wont allow change.
Is there any way I can maintain or fix this data, so I do not accumulate junk?
Any opinions appreciated
regards
Hanarin

Cathy,
Thanks for the reply.
To add a bit more information, F1 document is released to accounting.
Foreign trade data was not maintained, and was able to be released to Accounting (along with CO-PA)
with no issue. It is just when this document was cancelled via S1 that the system started complaining about Foreign Trade Data.
Thank you
Hanarin

Similar Messages

Foreign trade data defaulting to manually processed invoices.

Hello Experts,
How to default foreign trade data to manually processing invoices?
Presently it is being manuallay processed and we need to default this data automatially on Invoice.
Regards,
Preeti

We have maintained all the necessary setups for the foreign trade data.
however, while creating the billing document for export, it is not auto - defaulting the foreign trade data. can this be autopopulated?
The source and destination mode of transport.

Foreign trade data in delivery

Hi,
In our delivery, in Foreign Trade/Customs tab in Header Data, the ModeOfTrnsprt-Border and the DomestModeOfTransp. fields are empty.
I need to know from where ModeOfTrnsprt-Border and DomestModeOfTransop comes from in delivery . If there is any config missing, pls request you to inform the config path.
regds

Hi,
Foriegn Trade Data is generally maintained in billing, u can also maintain in delivery.
C
onfig Path - SPRO>S&D>Foreign Trade/Customs - Transportation Data
Maintain the below Steps:
1. Define Customs Offices
2. Define Modes Of Transport
3. Define Valid Combinations: Mode of Transport - Customs Office
4. Default Values For Foreign Trade Header Data.
further If you have any doubt revert back
Best Regards,
MH

Deactivate the Foreign Trade data in SD

Dear Friends,
How can I inactivate the Foreign Trade data...Incompletion schema....I dont want to maintain this for my exports sales order.....
So the system is not generating Accounting document without filling the Foreign data?
Thanks
Ivy

Hi Ivy,
In case Invoice Split is happening as your header detail for he Foreign trade data is differen on the billing document .
If the header fields in the billing documents created are not identical which causes an invoice split
VBRK-KNUMV
VBRK-NETWR
VBRK-MWSBK
VBRK-VBELN
VBRK-RFBSK
VBRK-ERNAM
VBRK-AEDAT
VBRK-ERDAT
VBRK-ERZET.
The above mention field fields should not cause a split but ither than that can cause a split .
To avoid a split due to different header fields - except for the fields listed above - you have the option of using customer-specific data transport routines in the copying control of the relevant document types which initialize the corresponding fields. However, the information contained in these fields is then lost in the billing document
Check note 11162 for more detail.
Hope this helps.
Kind Regards,
Sameer

Foreign Trade data in Invoice

Hello SAP Experts,
We are having many Invoices failing to create Accounting documents due to "Missing Foreign Trade data".
This issue have arised as they have Materials which are service materials and these service materials are not meant to have Export data.
Do we have any setting where we can make the "Foreign trade data " as exempt for these service materials and/or the Invoice do not have the Incompletion log for missing FT data.
Attached is the Invoice screeshots showing incomplete FT data and Posting status "Posting document not created (export data missing)"
Thanks in advance for your answers.
Umesh Karane

Hello Lakshmipathi,
I have checked the Incompletion log maintained and it's not maintained for Foreign Trade data.
I have also checked the Possibility of making the SERVICE Item's data as BLANK in material master: General /plant data , : Foreign Trade data, but even then the Billing document shows: FT incomplete.
Can we maintain Exemption for Foreign trade data for "SERVICE" materials in the Configuration of Foreign trade in IMG?
Thanks in advance for your answers.
Thanks and Regards,
Umesh.

Foreign Trade Data missing in Billing

Hi Experts,
Billing has not been posted to accounting.....due the below error.
Document 3091302003 has been saved (foreign trade data incomplete)
     Message no. VF072
Diagnosis
     The billing document you have edited contains foreign trade data. These
     are however not complete.
     This means that the document cannot be transferred to accounting (FI).
System response
     The system issues a message.
Procedure
     Maintain the incomplete foreign trade data. Then you can transfer the
     billing document to accounting (FI).

Hi
Kindly go to the billing document and maintain the foreign trade data for header and uitem as belwo
VF02Billing documentGOTOHeader-Foreign trade data
VF02Billing documentGOTOitem-Foreign trade data
Click on incompleteness analysis button on the tab it will show you the incomplete fields   to updtae
Once the above is done release the billing document
REgards
Damu

Incomplete Foreign Trade Data in Billing document....

Experts,
I am using a scenario which is order related billing and the item cat is TAP....while processing(Saving) the billing document I am getting an error nessage saying foreign trade data is incomplete.....I got couple of question regarding this...
1)Since its a domestic sales where end customer belongs to the same country of the Company code why is it foreign trade data is required?
2)Where the incompletion procedure is maintained?.....I have gone through VI29 & VI49 there are no entries exists.....
3)what kind of solution is available for this scenario?.......
Thanks in advance......

Hi Kumar S,
1)Since its a domestic sales where end customer belongs to the same country of the Company code why is it foreign trade data is required?
system will not check for the company code country instead it will check for the customer country & plant country. if it differs then only export data determination will come into the picture. as you said its order related billing. check the copy control settings from order - billing.
Determine export data.
Note: check the address maintained in Plant. Plant data may not changed when copying from other plant.
2)Where the incompletion procedure is maintained?.....I have gone through VI29 & VI49 there are no entries exists.....
this incompletion procedure generally assigned to country. as you are not dispatching . this doesnt have any impact.
3)what kind of solution is available for this scenario?.......
check for the default settings to determine export data, in case of export sales only . Tx:VI95.
Hope it helps.
Regards,
Reazuddin MD

Billing: Foreign trade data missing error

Hello friends,
I have a peculiar problem while trying to release billing doc to accounting. Delivering country is BE and Desination country is DE. I have setup config under Foreign data transportation to pull up default values by maintaining Tcode VI95.
However when I do VF01 the system doesn't seem to pull that data. Futhermore if I were to save the billing doc with foreign trade data as incomplete and then do VF02 to enter the data making sure the doc is complete, the system still won't let me post the data saying that foreign trade is still missing when infact it has been entered manually and the doc says its complete.
Any ideas??

Hi Robert,
did you know the OSS-Note 354222? Perhaps it usefull for you to have a look on it. If you one time go into the foreign trade data in the invoice, and they are incomplete you can't transfer this invoice to accounting.
Regards Thomas

Foreign Trade data incomplete at Billing

Hi,
I get the incompletion log to enter foreign trade data, if a foreign customer is entered at the sales order. But i do not want an incompletion log as there wont be any foreign trade data.
However i checked VTFL and the copying requirement at header is maintained as 3, which i think is correct and Determ.export data - Blank
Assignment Number - E
Reference number -A
Can someone please explain how to maintain country specific settings for this incompletion log?
I checked
IMG-> Sales & Distribution -> Foreign Trade/customs-> Control foreign trade data in MM & SD documents -> Foreign Trade Data in MM & SD Documents
But i dont understand what exactly is meant by country of origin? And how we should maintain it for all foreign customers?
Thanks
Keshini

Hi Keshini,
In VTFL...
Please try to maintain following settings:
At Header:
Copying requirements    003 Header/dlv.-related
Determ.export data        B
Assignment Number      E
Reference number         B
Also, Check the Box: copy item number
At Item: (I am supposing your Item cat. as TAN
Copying requirements    004 Deliv-related item
Data VBRK/VBRP         007 Inv.Split (Rec/Div)
Billing quantity               B
Pos./neg. quantity          +
Pricing type                    G
PricingExchRate type     (Blank)
Price source                  (Blank)
Don't Check Box: Cumulate Cost
I hope this will resolve your issue.
Best Regards,
Amit.

Export Billing Configuration with CIN and Foreign Trade Data

Hi,
I need detail configuration of Export billing with CIN and foreign trade data for my understnading the configuration process for export billing process.
Thanks in advance

Dear Tarun
I feel you need detailed configuration of CIN.
Two diffrent CIN configurations supported bySAP
TAXINJ & TAXINN. First is formula based & second is conditions based
Search in SDN you will get many threads.
Regards
Deepu Pilla

Billing split due to Number of foreign trade data

Hi,
When i am doing the Billing for an OBD which has one line item( split in two batch line items ), its creating two inter company billing documents. Split analysis shows, Split due to different header data, Number of foreign trade data number differs. In OBD, i found only one Number of foreign trade data number. Creation of two billing documents is creating a problem as I am not able to get the proper print(Description of Material is missing) in Inter company billing.
Appreciate if anyone could have a look and let me know the reason for split as it should have only one inter company billing doc.
Regards,
Irfan

Hi Irfan
Please activate the Incompletion procedure for header and item as shown below :
1. IMG> Sales and distribution>Foreign Trade/Customs-->Incompleteness Schemas for Foreign Trade Data.
Create 2 Incompletion procedure Z1-Incompletion procedure- header and Z2-Incompletion procedure - Item
2. Z1-Incompletion procedure- header : Assign the following fields
EXPVZ Mode of Transport for Foreign Trade
STABE Country of Origin of the Means of Transport at Departure
STGBE Origin of Means of Transport when Crossing the Border
ZOLLA Customs Office: Office of Exit/Entry for Foreign Trade
3.Z2-Incompletion procedure - Item
Origin field EXPRF
1 Field ready for input - Incompletion check not active
4. Then go to Foreign Trade Data in MM and SD Documents and assign the above incompletion procedure
DE 004 Germany 2 Z1 Z2 activate tick mark
ES 011 Spain 2 Z1 Z2activate tick mark
FR 001 France 2 Z1 Z2activate tick mark
This will solve your issue .
Thanks and regards
Veera

Foreign trade data in Billing with Billing plan

Dear Gurus
Foreign trade data comes in Billing incompletion log if the Billing is created with reference to Delivery. Then I get in Intrastate Report ve01.
I have a scenario wherein I am Billing Stagewise. Hence it is Order related Billing plan and Delivery does not come into Picture.
So I dont get the Foreign Trade incompetion log too and it does not appear in Intrastate report.
How can I show this type of sale in Intrastate reporting.
Regards,
Neeraj Srivastava

Hi Mr.Lakshmipathi,
Thank you very much for your solution.
When I entered only Foreign trade Header Data, then Accounting document generated. After generation of Accounting document when I tried to enter Foreign trade Item level all the fields are in disabled mode. Is it possible to make it enabled mode by this user can enter required data.
How , I will come to know cross check required notes before starting any scenario.
Regards
Kumar

No accounting document generated (foreign trade data incomplete)

hello all,
I meet a problem like this:
Sales order: 1001
delivery: 2001
Invoice: 3001
another invoice 9001 has created for cancel 3001.
when we saveed 9001, no accounting document generated, but we were not cognizant of it. and we did VF09 reverse PGI, VL02 delete delivery 2001.
now the problem is: when we try to release invoice 9001 to accounting, a message occurs "Document 9001 has been saved (foreign trade data incomplete)"
it seems need data of delivery 2001, but it has been deleted.
can anyone please give me suggestions? thanks!
Document 9001 has been saved (foreign trade data incomplete)
    Message no. VF 072
Diagnosis
    The billing document you have edited contains foreign trade data. These
    are however not complete.
    This means that the document cannot be transferred to accounting (FI).
System Response
    The system issues a message.
Procedure
    Maintain the incomplete foreign trade data. Then you can transfer the
    billing document to accounting (FI).

Hai Laxmipathi,
As the issue addressed by Mu_ying, exactly even I have encountered the same error. I am working on Export Scenario where in created a billing doc and saved (without foreign trade data) but later its cancelled and subsequent delivery doc is also cancelled but when i release the cancelled billing doc error pops up as "foreign data incomplete" but doc no. is saved, as mentioned by Mr. Mu_ying mail.
However, in my case when i try change in VF02 item level for foreign trade/customs tab (change for the cancelled doc) the radio buttons for System is RED, and I am unable to enter the data as all the fields are greyed out, due to this reports figures are incorrect. Hope u r able to get what i have mentioned.
i/p's will be of great help.

Regarding foreign trade data incomplete

Hi guru's
When i am saving the invoice i am getting an error like this.
<b>Document 90035592 has been saved (foreign trade data incomplete)</b>
can u people solve this problem.very urgent.
thanks&regards
veera.

Hi Prakash,
Please refer the following:
Check the shipping point in sales order ?
Also check the SAP Note No 313188
Read the following SAP note. This can also be the case.
Note 354222 - Foreign trade data incomplete for domestic business
Summary
Symptom
A billing document cannot be transferred into accounting because the foreign trade data is incomplete.
However, the underlying business process is a domestic business!
Additional key words
VF01, VF02, EIPO, EIKP, foreign trade, incompleteness, domestic, delivery, billing document, EXNUM, EXPKZ,export indicator, export number
Cause and prerequisites
In the respective delivery or in the billing document, for domestic business you by mistake go to the foreign trade data into a field. Since the incompletion log requires at least one entry for foreign trade, you must fill one field in order to be able to leave the foreign trade data again without canceling document processing.
Here, an export indicator and an export number is assigned which cause the incompleteness of the whole document due to missing export data.
Solution
A solution in the standard system is currently not planned since because of various customer requests the foreign trade data in the delivery should be accessed and maintained for domestic business too. An example is the inbound delivery in a bonded warehouse where the forwarding agent should get information already in advance.
To avoid incorrect billing documents, proceed as follows:
Copy data transport routine 001 to a routine 601 and enhance the new routine according to the attached correction instruction (RV60C601). Store this new data transport routine in Customizing for the copying control for billing documents for the processes you use, for example
- F2 - LF, item category TAN. (delivery-related)
If you already use an own data transport routine, in this data transport routine include the attached source code.
You must cancel existing billing documents and then create them again.
If you do not want to cancel existing documents, implement the attached correction (program RV60AFZZ) and release the documents either individually (VF02, default transaction) or via the list of blocked billing documents (VFX3).
After you completed the correction, you should cancel this solution (RV60AFZZ) again.
Also refer to the attached Note 170183.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 16.02.2005 17:15:20
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SD-BIL-GF Basic Functions
Secondary Components: SD-FT-PRO Basic Functions
SD-BIL-CA Account Assignment
Hope the same helps you.
REWARD if it helps you!!
Regards,
Ajinkya

Foreign trade data is incomplete for the line item eg 70!

Dear Sapients,
I have encountered an issue related to invoice while releasing it to accouting.
The invoice is done for several line items but the problem is faced for one line item only, could any one suggest the possible solution please.
Regards.
Kodali

hi
Read the following SAP note. This can also be the case.
Note 354222 - Foreign trade data incomplete for domestic business
Symptom
A billing document cannot be transferred into accounting because the foreign trade data is incomplete.
However, the underlying business process is a domestic business!
Additional key words
VF01, VF02, EIPO, EIKP, foreign trade, incompleteness, domestic, delivery, billing document, EXNUM, EXPKZ,export indicator, export number
Cause and prerequisites
In the respective delivery or in the billing document, for domestic business you by mistake go to the foreign trade data into a field. Since the incompletion log requires at least one entry for foreign trade, you must fill one field in order to be able to leave the foreign trade data again without canceling document processing.
Here, an export indicator and an export number is assigned which cause the incompleteness of the whole document due to missing export data.
Solution
A solution in the standard system is currently not planned since because of various customer requests the foreign trade data in the delivery should be accessed and maintained for domestic business too. An example is the inbound delivery in a bonded warehouse where the forwarding agent should get information already in advance.
To avoid incorrect billing documents, proceed as follows:
Copy data transport routine 001 to a routine 601 and enhance the new routine according to the attached correction instruction (RV60C601). Store this new data transport routine in Customizing for the copying control for billing documents for the processes you use, for example
F2 - LF, item category TAN. (delivery-related)
If you already use an own data transport routine, in this data transport routine include the attached source code.
You must cancel existing billing documents and then create them again.
If you do not want to cancel existing documents, implement the attached correction (program RV60AFZZ) and release the documents either individually (VF02, default transaction) or via the list of blocked billing documents (VFX3).
After you completed the correction, you should cancel this solution (RV60AFZZ) again.
Also refer to the attached Note 170183.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 16.02.2005 17:15:20
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SD-BIL-GF Basic Functions
Secondary Components: SD-FT-PRO Basic Functions
SD-BIL-CA Account Assignment

Foreign trade data cannot be maintained in Billing Cancellation (S1)

Similar Messages

Maybe you are looking for