Foreign trade:export and foreign trade:import

hi
  i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:import views in material master record.
Ex       
scenario:- if i am importing a material from india and export the same to china.
Edited by: RajKiran Mohanty on Aug 20, 2008 1:44 PM
Edited by: RajKiran Mohanty on Aug 20, 2008 1:44 PM

the material that you import from india to export to China will not change its origin during this transition.
It the origin is India, it is still India even you export it from Singapur to China.
If you import this material from several sources and each has a different country of origin, then you can manage this only with batches, as you can maintain the CoO in the batch.

Similar Messages

  • Foreign trade:export and foreign trade:export

    hi
      i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:export views in material master record.
    Ex       
    scenario:- if i am importing a material from india and export the same to china.

    Hi Mohanty,
                 we cannot maintain two different country of origin for foreign trade:export and foreign trade:export views in material master record.
                  As the same good is been traded, but the effect of taxation and the business quota system (for example apparal, indid has a quota to trade 10% ), similarly the rate of taxation differ by the amount of value addition done in the country.
                 As part of obeying the business process we cannot maintain two different country .
    With regards,
    Lakshmi Narayana

  • Foreign trade:export and foreign trade:export views

    hi
    i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:export views in material master record.
    Ex
    scenario:- if i am importing a material from india and export the same to china.

    Using your example: India is the country of origin and China the country of destination - you don't need 2 countries of origin.
    Country of Origin = Country where the material comes from

  • Export and then re-import source files from InfoPath 2010

    Hi all,
    While looking in to my form being oddly large I exported all the source files and noticed that there was a large image file in there (which wasn't on any of the views, so I don't know how it was there). I need to delete this file, then re-import all the
    files to become an InfoPath form again. Can someone please tell me how I do that? I don't seem to be able to find anything in the menus....
    Thanks!
    Alex

    Hello Alex,
    I don't think you can import modified infopath form to become a new form. Event you export forma nd delete any file or image then also you will get error when open the menifest.xsf file.
    Better you try to find image in form and delete image from form itself. Just check all the views, form controls (specially hyperlink),  to remove that image.
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • TS2481 Bad instructions for troubleshooting syncing contacts from my experience: going the vCard route as instructed did not preserve all group contacts. However, exporting and in turn importing an Address Book archive (.abbu) worked in place of the vCard

    Apple should update the TS2481 instructions.

    After I sent this initial post I did some more testing.
    Creating a new Smart Group in my now working 10.5.5 address book which has a NOT conditional caused Address Book to lock-up again.
    My Smart Group was pretty simple -- 'list all cards that are NOT a member of any group'.
    So, the steps in the posting above do NOT fix the problem, they only identify a particular type of Smart Group which will cause a problem and how to get a version of Address Book working again.
    I have not gone back and undertaken a thorough set of tests. I am just not going to create any new Smart Groups without first creating an Address Book Archive -- or alternatively overriding Library/Application Support/AddressBook from a Time Machine backup if there is a problem.

  • I've made an export and import, the values of region, pageid...change?

    I want to do an export and then an import of a group of pages. I want know if the values of the different pageid, regionid, etc, take different values when I do the import.
    I have some procedures where I put the value of some regionid and I don't know if when I make the import I'll have to change these procedures or the values will be the same.
    Thanks.
    Nacho

    hello
    all the IDs change. All item (including pages, pagegroups, items, .... ) are re created so that means that all IDs change.
    For your PL/SQL procedure, write a couple of function that will return the ID of elements by their name.
    for example :
    function get_page_group_id (p_name in varchar2) return number is
      l_page_group number;
      begin
      select id
      into l_page_group
      from portal.wwsbr_all_content_areas
      where name = p_name
        and language = portal.wwctx_api.get_nls_language;
      return l_page_group;
    end get_page_group_id;

  • Transfer Foreign Trade Export Import values in Purchase Order

    Hello SRM brothers and sisters,
    I have a question regarding the transfer of the Import/Export data (Foreign Trade) in the PO from SRM to ECC in the Classic Extended Scenario.
    Basically, in the SRM BBP_ECS_PO_OUT_BADI -> BBP_B46B_PO_OUTBOUND method where we map all the values, I try to fill in the CT_BAPI_POEXPIMPITEM table with the item's Import/Export values.
    The way this is done is:
    if nothing exists in this CT_BAPI_POEXPIMPITEM table for the PO item, add an empty line and assign the following fields ( PO_ITEM, EXPORT_IMPORT_PROCEDURE, COUNTRYORI and COMM_CODE).
    This is then sent to ECC via the RFC BBP_PO_INBOUND function module - and inside I know that it assigns the X-structure of Export/Import Item. It then calls the BAPI_PO_CREATE / BAPI_PO_CHANGE and in the debugger the values seem to be correct.
    This all seems to be very nice, however when I take a look at the PO in ME23n, the values of the Import/Export data are not there! In table EIPO there is also nothing... As for error messages, nothing comes up either.
    So, has this happened to anyone? Am I doing something wrong? Is there an extra step I should do (ie, fill another structure/table/field)?
    Cheers,
    Adi

    Hi Kishor,
    Thanks for your reply.I need to some more inputs if you can...
    As you mention :-You need to enter the special UOM according to the specifications in the index of goods or foreign trade statistics: can you give a example to get more clarification.and how Qtys. are converted to this unit for the export declaration.
    You mentionwd : (FOr each item, you have to enter the amount of the unit of measure determined
    in the index of goods. Eg: number of units) -can u explain with example. what is index of Goods.
    Thanks in adavance.
    Thank you.
    Regards
    Amar

  • BAPI to update EIKP (Foreign Trade: Export/Import Header Data) data

    Hello,
    Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
    Thank you.
    Best Regards,
    Sreenivasa Chary Bathoju.

    Dear Sreeninvas,
    You can you BAPI_PO_CHANGE to change EIKP data. and all purchase order related data.
    Thank you.
    Best Regards,
    Sasidhar Reddy Matli.

  • Export Billing Configuration with CIN and Foreign Trade Data

    Hi,
    I need detail configuration of Export billing with CIN and foreign trade data for my understnading the configuration process for export billing process.
    Thanks in advance

    Dear Tarun
    I feel you need detailed configuration of CIN.
    Two diffrent CIN configurations supported bySAP
    TAXINJ & TAXINN. First is formula based & second is conditions based
    Search in SDN you will get many threads.
    Regards
    Deepu Pilla

  • BAPI to update EIKP (Foreign Trade: Export/Import Header Data)

    Hello,
    Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
    Thank you.
    Best Regards,
    Sreenivas.

    Hi Sreenivas
    Try the FM EXPIMP_POSTING
    Pushpraj

  • Legal Unit and Foreign Trade organization are not in same country

    Hi all,
    We are currently working on a Maquiladora project under which our plants in Mexico will be assigned to a US company code.
    However, when we try to define this org structure in GTS, we are getting the below warning message while assigning the Legal Units (with MX address) to the FTO (US address). The system allows us to save the config, but it doesn't appear to work correctly. For example, when I simulate an import into MX plant, the system is applying the US legal regulation rather than MX.
    Has anyone encounterred this error or any suggestions? (One idea we thought about is to define the FTO with a MX address, not sure if this would be the right thing to do; one additional problem is, the given FTO also includes other US plants for which we do want to apply US legal regulation, should we rather define an entirely separate company code (US address) & FTO (MX address) for the given MX plants??)..Can someone shed some light on this subject? Thanks in advance. -Raj Palanivel.
    Below is the full details of the warning/error:
    Legal Unit xxx and foreign trade organization yyy are not in same country
    Diagnosis
    You tried to assign  foreign trade orgnaization yyy in in US to legal unit xxx in MX.
    This is not permitted. You must create the legal unit and the foreign trade organization in the same country.
    System Response
    The system does not permit this entry.
    Procedure
    Correct your entry.

    Hi Raj,
    In GTS we can map the company codes to FTO's as one to one  and FTOs to company codes as many to one in the same way plants and legal units.
    So in this case you can maintain one dummy FTO related to Mexico and assign it to the plants in mexico.But in R/3 you will map the plants in mexico to US company codes.For this SAP has provided some BADI's to implement this functionality.we have also have some similar functionality which we have implemented it at the time of transfering outbound deliveries.So use the following BADI /SAPSLL/IFEX_SD0b_R3 and method IF_EXTEND_CON_CDOC. you need to maintain one custom table for the organization units which needs to be transfered.
    Regards,
    HAri Challa.

  • Foreign Trade Export Procedures

    Hi,
    we are planning to implement the foreign trade export for Algeria.
    Pl let me the procedures for export trade and also the best practices used for this.
    Regards
    Ravi

    Dear Ravi
    For general export configuration, please make a search in the forum and specific to Algeria, first you have to identify what are all the statutory and other requirements prevailing over there and accordingly, you need to configure.
    thanks
    G. Lakshmipathi

  • MM03- Legal Control Tab (Foreign Trade export screen )

    Dear All,
    I need to Disable ' Legal control'  tab in Foreign Trade export screen in MM03,
    Could you please give Configuration Path ??
    Many Thanks!!
    Best Regard!!!
    Sneha

    Hi,
    You can do it in OMSR...but you have to individually disable the fields.
    OMSR> select MARC-PRENC>click on the arrow in extreme right side>field references are shown>here you can hide, display make required entry or optional entry.
    In case of doubts please revert..
    Regards
    Arya

  • MM03- Legal Control (Foreign Trade export screen)

    Dear All,
    I need to Disable ' Legal control'  tab in Foreign Trade export screen in MM03,
    Could you please give Configuration Path ??
    Many Thanks!!
    Best Regard!!!
    Sneha

    Hi Sneha,
    If you want to remove the legal control fields, you have to remove teh dynpro SAPLMGD1 2202 from the screen sequence .
    You can do it in spro - Logistics General - Material Master - Configuring the Material Master - Define Structure of Data Screens for Each Screen Sequence ...   (better if you do it for a screen seunce not standard).
    Regards,
    Mauro

  • Control Code in Material Master Foreign Trade Export view

    Hi All,
    In material master Foreign Trade Export view we have a field Control Code (MARC - STEUC) i would like to know where do we configure these control codes in SPRO?
    I need to know the path to configure them
    Regard s
    Pavan

    spro@Logistics - General@Material Master@Material IDs@Maintain PKWiUs
    Regards,
    Indranil

Maybe you are looking for