Foreign Trade - Export License Number for SED and SLI

We are not using full blown foreign trade. I just recently set up ECCN codes to be used on the above forms for exporting (we have home grown SAPScripts). Now I am being asked to have a way to store the Export License Numbers by material (it is item 22 on the SED). Any ideas?

thanks Alex Zheng for your answer but i did not get you
when i define a license type in VE51 -> no material number attribute exists
please clarify
thanks in advance

Similar Messages

Foreign Trade _ Export License Number for SED or SLI

We are not using full blown Foreign Trade. I just recently set up ECCN codes to be used on the above forms for exporting. Now I am being asked to have a way to store Export License Numbers (it is item 22 on the SED) . . . They are asking it be stored on the material. Any ideas?

thanks Alex Zheng for your answer but i did not get you
when i define a license type in VE51 -> no material number attribute exists
please clarify
thanks in advance

Foreign trade:export and foreign trade:import

hi
i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:import views in material master record.
Ex
scenario:- if i am importing a material from india and export the same to china.
Edited by: RajKiran Mohanty on Aug 20, 2008 1:44 PM
Edited by: RajKiran Mohanty on Aug 20, 2008 1:44 PM

the material that you import from india to export to China will not change its origin during this transition.
It the origin is India, it is still India even you export it from Singapur to China.
If you import this material from several sources and each has a different country of origin, then you can manage this only with batches, as you can maintain the CoO in the batch.

Foreign trade:export and foreign trade:export

hi
i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:export views in material master record.
Ex
scenario:- if i am importing a material from india and export the same to china.

Hi Mohanty,
             we cannot maintain two different country of origin for foreign trade:export and foreign trade:export views in material master record.
              As the same good is been traded, but the effect of taxation and the business quota system (for example apparal, indid has a quota to trade 10% ), similarly the rate of taxation differ by the amount of value addition done in the country.
             As part of obeying the business process we cannot maintain two different country .
With regards,
Lakshmi Narayana

Foreign trade:export and foreign trade:export views

hi
i just want to know if we can maintain two different country of origin for foreign trade:export and foreign trade:export views in material master record.
Ex
scenario:- if i am importing a material from india and export the same to china.

Using your example: India is the country of origin and China the country of destination - you don't need 2 countries of origin.
Country of Origin = Country where the material comes from

Foreign Trade Export Procedures

Hi,
we are planning to implement the foreign trade export for Algeria.
Pl let me the procedures for export trade and also the best practices used for this.
Regards
Ravi

Dear Ravi
For general export configuration, please make a search in the forum and specific to Algeria, first you have to identify what are all the statutory and other requirements prevailing over there and accordingly, you need to configure.
thanks
G. Lakshmipathi

I have the License Number for CS6 Creative Suite How does this translate for "Creative Cloud"

I have the License Number for CS6 Creative Suite, but when I downloaded Creative Suite and tried to license the product, it keeps coming up with an error, "The Serial Number is not valid for Adobe Photoshop CC." How do I register my product?

Photoshop CC is the equivalent of CS7... and it is available ONLY by paying for a monthly subscription... your CS6 serial number does not work for CC
-http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
--has a link to manage your membership which may help

How do I unregister a serial number for LR and replace it with another one?

Hello
I got LR3 with my Leica M9. Now I sold my M9 and I'm waiting for the next Leica M to arrive in the next few months. Since LR is more or less part of the Leica-Software, I sold it with it and for the time, while I waiting for the next M, I bought a new LR-License.
Now I want to give the buyer of my camera the license number for the LR3, that came with the M9 and the LR4-update to it, so he can use it with the camera.
My problem is now, that I can not unregister the license-number in my Adobe-account for the old LR. How do I do that? After unregistering I want to install my new LR, that just arrived today and register it, but I'm afraid, that I have two registered LR4 versions then and can't give the solde one to the buyer of the camera.
Thanks for any help and best regards!

Excerpt from the Lr EULA:
4.4 No Transfer. YOU MAY NOT RENT, LEASE, SELL, SUBLICENSE, ASSIGN OR TRANSFER YOUR RIGHTS IN THE SOFTWARE, OR AUTHORIZE ANY PORTION OF THE SOFTWARE TO BE COPIED ONTO ANOTHER INDIVIDUAL OR LEGAL ENTITY'S COMPUTER EXCEPT AS MAY BE PERMITTED HEREIN. You may, however, transfer all your rights to use the Software to another individual or legal entity provided that: (a) you also transfer this agreement, (ii) the serial number(s), the Software and all other software or hardware bundled, packaged or pre-installed with the Software, including all copies, upgrades, updates and prior versions, and (iii) all copies of font software converted into other formats to such individual or entity; (b) you retain no upgrades, updates or copies, including backups and copies stored on a computer; and (c) the receiving party accepts the terms and conditions of this agreement and any other terms and conditions under which you purchased a valid license to the Software. NOTWITHSTANDING THE FOREGOING, YOU MAY NOT TRANSFER EDUCATION, PRE-RELEASE, OR NOT FOR RESALE COPIES OF THE SOFTWARE. Prior to a transfer Adobe may require that you and the receiving party confirm in writing your compliance with this agreement, provide Adobe with information about yourselves, and register as end-users of the Software. Allow 4-6 weeks to transfer. Please visit http://www.adobe.com/supportor contact Adobe's Customer Support Department for more information."
For full text of EULA see here: http://labs.adobe.com/technologies/eula/lightroom.html

Where can I find a license number for an app?

I bought the app Cocktail a while back and I've used it successfully to help keep my MBP running smoothly. But now I need to install the app. I don't want to buy it again and get a new license number. I wrote that single user license number down on a piece of paper but I've lost that information. Is there anywhere in my laptop, maybe hidden in Library or Preferences, where I can find that valid single user license number for Cocktail?
Thanks
Panther

Some apps show the license/registration key in their File > Preferences or File > Registration; if you don't have that, the only thing I can think of is to contact Cocktail and give them your purchase date to see if they can find it in their records.
FWIW, I keep a record of all registration numbers in a safe place (I have 2 pages worth).

MM03- Legal Control (Foreign Trade export screen)

Dear All,
I need to Disable ' Legal control' tab in Foreign Trade export screen in MM03,
Could you please give Configuration Path ??
Many Thanks!!
Best Regard!!!
Sneha

Hi Sneha,
If you want to remove the legal control fields, you have to remove teh dynpro SAPLMGD1 2202 from the screen sequence .
You can do it in spro - Logistics General - Material Master - Configuring the Material Master - Define Structure of Data Screens for Each Screen Sequence ... (better if you do it for a screen seunce not standard).
Regards,
Mauro

BAPI to update EIKP (Foreign Trade: Export/Import Header Data) data

Hello,
Is there any BAPI to update EIKP (Foreign Trade: Export/Import Header Data) table fields.
Thank you.
Best Regards,
Sreenivasa Chary Bathoju.

Dear Sreeninvas,
You can you BAPI_PO_CHANGE to change EIKP data. and all purchase order related data.
Thank you.
Best Regards,
Sasidhar Reddy Matli.

How can I get the serial number for registration and instalation?

Hello ,How can I get the serial number for registration and instalation?

contact your local sales representative.
You don't need a serial number to install LabVIEW.
Registration is optional.
Activation is needed after the evaluation period.
Install it without number and it will work for a limited time (30days?) in evaluation mode, giving you plenty of time to decide if you want to buy it.
Check the license manager to see the activation status of everything installed.
LabVIEW Champion . Do more with less code and in less time .

Export license number

Hi All,
When printing the proforma invoice the Export license number is missing. License number is maintained for the products. Please help me out by providing solution
regards
Aswani kumar
Edited by: Sri Datta on May 28, 2008 4:16 PM

Hi ,
Try out a different approach, this may help you out:
1. go to the print program .
2. search with the text element which contains the variable (used for printing lisence)in the form.
3. will will find the element in a write_form statement.
4. for that write form fn module find the loop...endloop.
5. declare a counter after the loop statement & assign it to 1.& increament it by 1 before endloop statement.
6. fetch the export lisence & store it in the variable which you pass to the form.
7 .check for counter = 1,
if sy-subrc <> 0.
free that variable.
pls donot use sy-tabix instead of counter.
Hope this will work.
Message was edited by: DIBYENDU BHATTACHARYYA

Help! I received a message on my iPhone that "phone Number Added to iPad4 [NAME of IPAD] is now using [PHONE NUMBER] for FaceTime and iMessage" and it is not my iPad!! What do I do, how do I shut them out??

Help! I received a message on my iPhone that "phone Number Added to iPad4 [NAME of IPAD] is now using [PHONE NUMBER] for FaceTime and iMessage" and it is not my iPad!! What do I do, how do I shut them out??

Use a strong password and set up Two Step Verification on your account.
http://support.apple.com/kb/ht5570

How do I set up a new phone number for messaging and facetime on my iPad?

My iPad has it's own phone number through Verizon. Before I knew this, I had already set up messages to use my iPhone number. Now I can't figure out how to set up the iPad phone number for messages and facetime on the iPad.

Are you trying to message another Apple device?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

Foreign Trade - Export License Number for SED and SLI

Similar Messages

Maybe you are looking for